Embed Size (px)
DESCRIPTION
Step-by-Step: "Adding Beads" by Jasmine Shea Jasmine Shea for Scrap Friends I am here to share with you my technique for adding beads to a project which I did with this page: Step 1. Select the chipboard piece you wish to cover. You can choose to paint it or ink it at this stage. In my page I left it raw as I was using Kraft background and it blended well against the white texture paste behind it. You will also need your beads, some Dimensional Magic and scissors if you are cutting any part of the chipboard. Step 2. Coat your chipboard with Dimensional Magic. Step 3. Pour the beads over the chipboard until it is covered. You may need to place the beads in any spots that are not covered. You can use tweezers to hold the bead to help get into the hard to reach places. Step 4. The finished piece. For the "dripping beads" on my page I dotted glue randomly down the page and placed each bead on the glue spots....yes, it requires some patience but the result is worth it! Thanks For Reading!!! Jasmine Shea http://scrapfriends.com.au/
Citation preview
04/11/2023
Jasmine Shea for Scrap FriendsI am here to share with you my technique for
adding beads to a project which I did with this page:
3
Step 1 : Select the chipboard piece you wish to cover.
You can choose to paint it or ink it at this stage. In my
page I left it raw as I was using Kraft background and it
blended well against the white texture paste behind it.
You will
also need
your beads,
some
Dimensional
Magic and
scissors if
you are
cutting any
part of the
chipboard.
5
Step 3 : Pour the beads over the chipboard until it is
covered. You may need to place the beads in any spots
that are not covered. You can use tweezers to hold the
bead to help get into the hard to reach places.
04/11/2023
For the "dripping beads" on my page I dotted glue randomly down the page and placed each bead on the glue spots....yes, it requires some
patience but the result is worth it!
