Upload
kei-lim
View
131
Download
1
Embed Size (px)
Citation preview
Customized Titanium Membrane
152
Custom
ized Titanium
Mem
brane
Introduction
has developed independently by Neobiotech Co., Ltd., Which is the customized
titanium membrane with minimum cutting and bending of it for attaching on the location of part used. This
product, customized titanium membrane, solved the existed rectangle membrane's own inconvenience of
cutting problem.
Customized Titanium MembraneC
ustomized
Titanium M
emb
rane
153
Introduction
1. Biocompatibility
Cp. Ti material has an excellent biological stability, and it is beneficial to bone formation.
2. Strong
Compare to absorbable membrane, it has a superior strength and excellent retention of BMP space.
3. Flexibility
Has an excellent flexibility due to the thinness, and it can easily produce a desired shape.
4. Customized shape
Depending on the location, it provides variety sizes of membrane that are suitable for treatment use.
Membrane with a minimum of trimming can be made into the shape you want.
5. Implant fixation
Even without the use of membrane fixing screw, it can be fixed directly to Implant.
6. Vertical Augmentation
Vertical Augmentation is adjustable with using 1mm, 1.5mm, 2mm of CTi Spacer.
7. 1-stage Surgery
After completing GBR, the CTi-Mem can be easily removed without having 2-stage surgery.
Advantage of CTi-Mem
Customized Titanium Membrane
154
Custom
ized Titanium
Mem
brane
Introduction
CTi-mem Characteristic
1
2
3
4
5
C
6
Lingual fingerMain function is to maintain the efficient space by covering the 2~3mm of lingual defect with easy bending. Simple
cutting if necessary.
Proximal fingerNecessary when vertical augmentation of Misial&distal defect, shape formation available with easy bending. Cut
the unnecessary part After measure the width of proximal.
Lateral augmentation part- Put the C part as the centre and bending of a curved for 2~3mm thick side bone formation.
- Bending the side extrusion inwards in order to protect bone transplant and form the space. Porous exists to
minimize the soft tissue exposure.
Lateral cover- Cover part of side transplant bone materials. Choose the size depends on defect length.
- Three dimensional bending available, no porous exists to be able to remove the CTi-mem with simple 2nd surgery.
FootProtect the transplant material as bending inwards, have membrane fixation by contacting the existing bone.
Fixing holeThe hole formed to fix the CTi-mem to fixture. Firstly connect the CTi Spacer to fixture, lift up the CTi-mem and
then fix with the CTi Healing Abutment or CTi Cover Cap. Vertical bone formation can be decided depends on CTi
Spacer height.
1
2
3
4
5
6
Customized Titanium MembraneC
ustomized
Titanium M
emb
rane
155
CTi-mem has three A types, nine B and C types and three E types. Total of30 kinds of membranes are customized.
A-Type 1 Wall
Augmentation (Buccal or Lingual)
B-Type 2 Wall
Augmentation (Buccal - Proximal)
C-Type 3 Wall
Augmentation (Buccal-Lingual-Proximal)
P(mm) W(mm) L(mm)(Proximal Width) (Buccal Width) (Buccal Length) Code Product Name
4 8 6 A1 ATMBN 0810S
4 10 8 A2 ATMBN 0912S
4 10 10 A3 ATMBN 0915S
P(mm) W(mm) L(mm)((Proximal Width) (Buccal Width) (Buccal Length) Code Product Name
6 B1 ATMBN 0910L
7 9 8 B2 ATMBN 0912L
10 B3 ATMBN 0915L
6 B4 PTMBN 1210S
10 12 8 B5 PTMBN 1212S
10 B6 PTMBN 1215S
6 B7 PTMBN 1210L
12 12 8 B8 PTMBN 1212L
10 B9 PTMBN 1215L
P(mm) W(mm) L(mm)(Proximal Width) (Buccal Width) (Buccal Length) Code Product Name
6 C1 ATMLN 0910L
7 9 8 C2 ATMLN 0912L
10 C3 ATMLN 0915L
6 C4 PTMLN 1210S
10 12 8 C5 PTMLN 1212S
10 C6 PTMLN 1215S
6 C7 PTMLN 1210L
12 12 8 C8 PTMLN 1212L
10 C9 PTMLN 1215L
W
L
P
W
L
P
W
L
P
1. CTi-mem
CTi-mem Component
Customized Titanium Membrane
156
Custom
ized Titanium
Mem
brane
CTi-mem Component
D-Type ITI Type (Non-fixed)
1 Wall Augmentation
D-Type ITI Type (Non-fixed)
2 Wall Augmentation
E-TypeUniversal Type (Submerged & Non-fixed)
P(mm) W(mm) L(mm)(Proximal Width) (Buccal Width) (Buccal Length) Code Product Name
6 D1 ATUBN 0910L
7 9 8 D2 ATUBN 0912L
10 D3 ATUBN 0915L
P(mm) W(mm) L(mm)((Proximal Width) (Buccal Width) (Buccal Length) Code Product Name
6 D4 PTUBN 1210S
10 12 8 D5 PTUBN 1212S
10 D6 PTUBN 1215S
P L(Proximal Width) (Buccal Length)
Code Product Name
12 15 E1 CTM 1215
12 20 E2 CTM 1220
15 20 E3 CTM 1520
W
L
P
W
L
P
L
P
Customized Titanium MembraneC
ustomized
Titanium M
emb
rane
157
CTi-mem Component
- By connecting CTi spacer to the implant platform of the head, GBR can becontroled.
- After mounting the Cti-mem (A, B, C type) in upper part of being enteredand placed implant. Fix the CTi-mem with CTi Cover cap or CTi healingabutment.
- Available to control the vertical augmentation amount by using optionalthree types of CTi Spacer that are 1mm, 1.5mm, 2mm.
Diameter(�) Height(mm) Product Name
0.5 ISCTS 4005
1 ISCTS 40104.0
1.5 ISCTS 4015
2 ISCTS 4020
Type Diameter(�) Height(mm) Product Name
1 ENCTS 3710
Narrow 3.5 1.5 ENCTS 3715
2 ENCTS 3720
1 ERCTS 4010
Regular 4.0 1.5 ERCTS 4015
2 ERCTS 4020
1 EICTS 5010
Wide(3i) 5.0 1.5 EICTS 5015
2 EICTS 5020
1 EBCTS 5010Wide
5.0 1.5 EBCTS 5015(Branemark)
2 EBCTS 5020
EB CTi Spacer
IS CTi Spacer
2. CTi Spacer
Diameter
Height
Diameter
Height
Used for fixing the CTi-mem that has been mounting with CTi Spacer, andSubmerged purpose.
Diameter(�) Heightter(mm) Product Name
4.0 1.5 CTC 40
3. CTi Cover Cap
Diameter
Height
Customized Titanium Membrane
158
Custom
ized Titanium
Mem
brane
CTi-mem Component
Used for fixing the CTi-mem that has been mounting with CTi Spacer, andNon-Submerged purpose.
4. CTi Healing Abutment
Diameter 1(�) Diameter 2(�) Height(mm) Product Name
3.0 CHAG 4040304.0
4.0 CHAG 4040404.0
3.0 CHAG 4050305.0
4.0 CHAG 405040
Product Name
MCCD
Used for picking-up the CTi Cover cap, enter in or lossen the CTi cover capfrom the CTi Spacer.
5. CTi Cover Cap Driver
Product Name
MCCP
CTi-mem contouring Plier is for bending CTi-mem in right form.
6. CTi-mem Contouring Plier
Product Name
MG 00
CTi-guage is for measuring oral proximal width, buccal width and buccallength.
7. CTi Guage
Diameter 1
Diameter 2
Height
� CTi Spacer / CTi Healing Abutment can be close or released by 1.2 Hex Driver.
Customized Titanium MembraneC
ustomized
Titanium M
emb
rane
159
User Guide
1. Finish the implantation of the Fixture.
2. Choose CTi-Mem by using the measurement from CTi gauge and length space of bone graft.
3. Combine the membrane healing post with the fixture. By selecting the post, you need to know the
system of the implant, volume of the bone graft and EB and IS implant have two types of height(1mm,
1.5mm, 2mm) which this information can give good selection.
4. Proceed Bone graft.
5. Make model of the selected CTI- Mem. Do not bend rapidly in the same area or it will fracture the
CTI- Mem.
6. Stable the CTI-Mem and combine the membrane healing cap or membrane cover cap with below 10 Ncm. - With the gum height use suitable healing cap.
- Use cover cap for 2nd stage surgery.
7. Suture the Soft tissue.
1. A type : 1 wall augmentation
Placement for buccal in bone defect area
Implant at the area of bonedefect
Combine CTi Spacer withimplant
Image of CTi Spacer withimplant
Bone graft at Bone defect area
Bend Cti-mem with Con-touring plier
Bend Suitable Form byBending CTi-mem
Place the mount at CTi Spacer Before suture, combine CTiHealing abutment or CTiCover cap with CTi-mem
Customized Titanium Membrane
160
Custom
ized Titanium
Mem
brane
User Guide
2. B type : 2 wall augmentation
Placement for buccal, proximal in bone defect area
3. C type : 3 wall augmentaion
Placement for buccal, proximal and lingual in bone defect area
Implant at the area of bonedefect
Combine CTi Spacer withimplant
Image of CTi Spacer withimplant
Bone graft at Bone defect area
Bend Cti-mem with Con-touring plier
Bend Suitable Form byBending CTi-mem
Place the mount at CTi Spacer Before suture, combine CTiHealing abutment or CTiCover cap with CTi-mem
Implant at the area of bonedefect
Combine CTi Spacer withimplant
Image of CTi Spacer withimplant
Bone graft at Bone defect area
Bend Cti-mem with Con-touring plier
Bend Suitable Form byBending CTi-mem
Place the mount at CTi Spacer Before suture, combine CTiHealing abutment or CTiCover cap with CTi-mem
Customized Titanium MembraneC
ustomized
Titanium M
emb
rane
161
User Guide
4. D type : 1 wall agumentation for ITI type
Placement for buccal in bone defect area
5. D type : 2 wall agumentation for ITI type
Placement for buccal and proximal in bone defect area
Detect the area of bone defect Combine cover screw orhealing abutment
Bone graft at Bone defect area Bend Cti-mem with Contouringplier
Bend Suitable Form by BendingCTi-mem
Before suture, place CTi -memat bone defect area
Detect the area of bone defect Combine cover screw orhealing abutment
Bone graft at Bone defectarea
Bend Cti-mem with Contouringplier
Bend Suitable Form by BendingCTi-mem
Before suture, place CTi -memat bone defect area
Customized Titanium Membrane
162
Custom
ized Titanium
Mem
brane
User Guide
6. E type : Non-fixed Submerged
Placement for large bone defect area
1. Practitioners should use after fully understand the handling and precautions of the product.
2. Since the product is supplied as sterile, CTi-mem should be used immediately after it is opened from
the package.
3. In the case of package is damaged, the condition of sterilization is likely to be damaged. Therefore, it
needs to be discarded.
4. Inadvertent exposure by a carelessness of suture can cause a redness, swelling and tissue to be
eliminated. Therefore, it needs to be removed.
5. Improper selection of patients or procedures can lead to a failure of treatment.
6. CTi-mem is a disposable single- use product. Do not reuse.
�Warning
Detect the area of bone defect Combine cover screw orhealing abutment
Bone graft at Bone defect area Bend Cti-mem with Contouringplier
Bend Suitable Form by BendingCTi-mem
Before suture, place CTi -memat bone defect area
Customized Titanium MembraneC
ustomized
Titanium M
emb
rane
163
CTi-mem Selection
1. Depends on the wall situation, choose A, B, C type from the CTi-men.
2. Proximal width (p) of Occlusal part that needs to be covered by Membrane is measured in oral with
determination of the 'p' size. If Proximal defect is not existed, amputate the proximal when it's 1wall
choose A, and when it's b-l defect choose C for the amputation.
3. W (Buccal Width) can be decided by P (Proximal Width) and P can be measured From B and C.
Neo Titanium Mesh
166
Neo Titanium
Mesh
Introduction
Type of Ti-mesh
Neo titanium mesh can be trimmed by customer’s need (Thickness 0.085mm hole
size �0.8)
20mm 25mm
35mm 50mm
20mm
12mm
35mm
25mm
Size Code Product Name
20 x 12 T1 TMN 122008
25 x 20 T2 TMN 202508
35 x 25 T3 TMN 253508
50 x 35 T4 TMN 355008