About Chalkology Pest

Adhesive Silkscreen

The Chalk Transfer is a reusable adhesive silkscreen that can be used on chalkboards, windows, mirrors, tile, whiteboards, appliances, painted furniture and so much more.

Soluble Crafting Paste

Chalkology Paste is a water soluble crafting paste that goes on wet, dries hard and washes off of nonporous surfaces with water. It is used on our Chalk Transfers to give a beautiful, unique design each time

Smear Or SmudgeOnce it is dry it will not smear or smudge and has a durable yet smooth texture/finish. It can be layered, glittered (while it’s wet) and even written on (once it is dry).

Design From The Backer

Before peeling the design from the backer for the very first time use a blow dryer and warm up the Chalk Couture of the transfer. This only needs to be done the first use and will help ensure that no damage will be caused to the transfer as it is peeled away from the backer.

Peeling The Transfer OffSome Chalk Transfers require you to cut the design down into its individual parts. We also suggest putting an X on the backer before peeling the transfer off. This will help you remember to put the transfer on the shiny side when replacing it on the backer.

Apply The Chalkology PastePeel the backing off the Chalk Transfer and place on desired surface. Press and smooth the Chalk Transfer. Apply the Chalkology Paste by spreading it over the entire design using a Chalk Couture Squeegee

The Paste To DryA thin, even layer produces the best results.Work quickly, you do not want the paste to dry on the Chalk Transfer.  If you feel that it is drying too quickly you can give it a light misting with a spray bottle

Peel Transfer AwayAfter scraping, peel transfer away from surface slowly. If you have an area that didn’t apply well press that portion of the transfer back down, squeegee over the area or dampen your finger and rub the area to better spread the Chalkology Paste.

Clean With Sanitizing WipesTo clean, rinse Chalk Transfer with water and then wipe both sides clean with sanitizing wipes Chalk Couture . this removes any chalk residue and helps the adhesive last longer. Lay Chalk Transfer flat (sticky side up) to air dry

Line Up The BackerIt is easiest to leave the transfer as is (sticky side up) on a flat surface and line up the backer to the transfer. Use a clean and dry Chalk Couture Squeegee to smooth out the Chalk Transfer on the backer.

Our Porcelain Steel

While Chalkology Paste is specially formulated to use on our porcelain steel chalkboards, it can be used on a large number of surfaces. There are also a number of different materials on the market being sold and used as chalkboard

Get Some Fuzz On The AdhesiveWhen applying Chalk Transfers to windows, mirrors or glass for the very first use you will need to get some fuzz on the adhesive. This can be done by sticking it to a dry terrycloth washcloth or towel, your shirt or pant leg a couple of times.

Thanks for watching This slideFor morevisit here

http://www.anyonecanchalk.com