How to Tie A double winsor knot
How to Tie Adouble windsor knotBy Dianna Mitchell
1
Ignore that the tie is already in place & focus on the
collar
1.) Pop your shirt collar up.
2
2.) Place the tie around your neck, tag-side down against your
chest
Pull the wider end down so that the thinner end hangs about a
foot from the neck
3
3.) Cross the wider side over the thinner side
4
4.) Take the wider end up, behind, and through the back of the
neck loop that has been established from this step
Pull the wider end all the way through the neck loop and down
laying it on top of your hand
5
5.) Take the wider side and wrap it around the back of the
entire knot (in the same direction), and take it through the front
of the neck loop
Pull straight down, flat against the back of your knot
6
:: TIME OUT ::Here, you should have the inside of your
triangle-shaped knot if done correctly. This is a great point to
shape the knot into the triangle you want to see as an end
result
7
6.) Wrap the wider end around the front of the knot and to the
back, completely covering the inside knot
8
7.) Once the wider side is back behind the knot, bring it up and
through the back of the neck loop
Pull it down flat against the front of the covered knot
9
8.) Bring the wider side up and pull it through the space
between the knots front cover and the front of the knot itself
10
9.) Begin a repetitive and alternating action of pulling the
wider end downward and sliding the knot towards your throat
Be sure the thinner side remains hidden behind the wider
side
11
10.) Pull your collar down, adjust as needed, and admire your
work.
12
CONGRATULATIONSYOUVE TIED A TIE INTO ADOUBLE WINDSOR KNOT!!
13
: : : NOTE : : :
If you want more length in your finished look, start completely
over by pulling the neck loop apart until the knot falls out. This
time, reduce the length of the thinner side, adding more length to
the wider side.If you still dont get your desired length, you may
need to purchase a longer tie.
Thanks for watching!
14
