ARCHITECTURE DRAWING

Carlson Ko

Oscar Wong Zheng Yang

Lee Ren Jet

Liew Yu Xian

Chong Jin Feng

WHAT IS ARCHITECTURE DRAWING????

An architecture drawing is a technical drawing of building (or building falls within the defination of

architecture.

Architectural drawing are made according to a set of convention, which includes particular views like

floor plan, section, sheet sizes, units etc.

Architectural drawing are use by architect to develop their design ideas to clients and also to

communicate ideas and concepts.

Introduction

Architecture drawing usually use A0 size paper

(841mm X 1189mm) Architecture drawing are drawn to scale for the

correctly represented. Scale drawing enabled dimension to be understand

by others.

Size and scale

Stages Of Architecture

Drawings

Sort out what you like and what you want to change Consider some of the technical limits Discuss with designer about environmental

conditions Look at your budget Ask about future maintenance issues Decide if you feel comfortable

1.INITIAL SKETCH PLANS

Draw up the development designs Design is particularly a cutting-edge Discuss the materials use – cladding, flooring,

roofting, windows, doors Interior fittings and fixtures – power points, cable

jacks, exterior taps, light location and attic access Use a Quantity Surveyor to estimate the cost of the

project

2.DEVELOPED DESIGNS

In the tendering process, get quotes from

contractors, subcontractors and also quantity surveyors

Builder and contractors contracted to built house as blueprint for the construction

3.FINAL PLANS AND SPECIFICATION

Floor Plan Site Plan Elevation

Cross Section

Isometric and axonometric projections

Detail drawings

Standard views

Floor plan is a most fundamental architectural

diagram.Showing the arrangement at a particular level of a

building.3 feet / 1 metre above floor levelFloor plans includes anything that could be seen

below

Floor Plan

Symbols

Site plan is an architecture plan, landscape

architecture document, and a detailed engineering drawing

A site plan usually shows a building footprint, travel ways, parking, drainage facilities, sanitary sewer lines, water lines, trails, lighting, and landscaping and garden elements.

Site plan

ELEVATION

Elevation drawing that shows the front or side of a building

Without elevation drawings, you cannot see the details of your new cabinetry, the size of each drawer or the location of each cabinet

Elevation is not required for every renovation or redecorating project, they are very useful when designing items like a fireplace, bathroom vanities, bars, or any location with built-in cabinetry, such as an office or entertainment space

A cross section , also simply called a section,

represents a vertical plane cut through the object, in the same way as a floor plan is a horizontal section viewed from the top.

Everything cut by the section plane is shown as a bold line, often with a solid fill to show objects that are cut through, and anything seen beyond generally shown in a thinner line.

CROSS SECTION

A simple way of representing a three dimensional

object. An isometric uses a plan grid at 30 degrees from the

horizontal in both directions, which distorts the plan shape

An axonometric uses a 45 degree plan grid, which keeps the original orthogonal geometry of the plan.

Isometric and axonometric projections

THANK YOU