PRODUCT OVERVIEW(PROJECT MANAGEMENT)

Nanda Hidayah Melyan – Architecture

LEIBEL™ Leicht Beton Elemen produced by PT. Beton Elemen Persada present to be the number one solution to the needs of qualified lightweight concrete brick in Indonesia.

LEIBEL™ Lightweight concrete brick is the first product of a series of LEIBEL™products. LEIBEL™ Lightweight concrete brick is the answer to the high level of consumer demand for lightweight concrete brick, as well as the lack of lightweight concrete brick manufacturer producing qualified in Indonesia.

LEIBEL™ lightweight concrete brick is not usual lightweight brick. LEIBEL™ Lightweight concrete brickis is Autoclave Aerated Concrete Block with best quality in Indonesia.

OVERVIEW

Leibel is Lightweight Aerated Concrete products or so-called lightweight brick.Leibel lightweight concrete brick is a traditional brick replacement. Leibel

Lightweight concrete brick provide benefits that can not be obtained from the usual brick or other lightweight brick.

THE PRODUCT

With aeration process controlled of computerized, making LEIBEL™ lightweight concrete brick as a lightweight concrete with strong against high pressure.

Air cavities contained in LEIBEL™ lightweight concrete brick making LEIBEL™brick to be very light, compared with the red brick and even compared with the other lightweight concrete. LEIBEL™ lightweight concrete brick also make smaller dimensional of structures building because the weight becomes lighter. With the light weight, the construction of project become faster and more efficient.

By using LEIBEL™ lightweight concrete brick, the project will save processing time. Time installation of LEIBEL™ Lightweight concrete brick 40% faster than ordinary bricks. Thus using LEIBEL™ Lightweight concrete brick can reduce the cost of development operations.

Light weight and strong made LEIBEL™ lightweight concrete brick easily sawed, drilled, shaped and done just by using ordinary wood equipment.

LEIBEL™ Lightweight concrete brick has air bubbles that cause the LEIBEL™ Lightweight concrete brick has good heat insulating properties so they can save energy and cost of use air conditioning.

LEIBEL™ Lightweight concrete brick has the characteristics as insulation or heat-retaining material. In case of fire, LEIBEL™ lightweight concrete brick wall can withstand fire for about 4 hours before the wall collapsed. Thus the wall can be provide protection to the occupants to escape.

THE PRODUCT

Leibel lightweight floor panels are the best solution to build houses, shops, factories, hotels and other buildings building by reducing the cost and time. Leibel lightweight floor panels designed using wiremesh reinforcement and protected by anti-corrosion materials. The panel can be placed over the concrete or steel beams. Unlike conventional casting generally mild Leibel floor panels do not need to wait prosses curing, because the panel had been through prosses curing in the plant. By using lightweight floor panels Leibel construction work will be completed more quickly, the installation can use the manpower or can be assisted by takel / hoist. Installation of this floor can reach approximately 100 m2 a day.

Some of the advantages Floor Panel Light Leibel1. Solid and robust Panel Light Floor Leibel made with a good formula and tested its strength in the laboratory. Test results showed that our panels have the same carrying capacity with conventional concrete floor.

2. Thermal Insulation With combined with light brick wall Leibel will generate room with excellent thermal insulation. Use of Air Conditioner will be reduced due to the nature of the AAC (autoclave aerated concrete) are difficult to deliver the heat. In other words, it will save the use of air conditioning for your building.

3. Fast Installation is very quick and practical, requiring no scaffolding / scafolding. 1 team can finish the installation of the floor panel installation work light Leibel approximately 100 m2 per day.

4. Hold the heat and flames Material AAC has the difficult nature of the heat dissipates make your room become cooler. Furthermore AAC Leibel material has been tested in laboratory and meets the requirements of Fire Resistance Levels (TKA) - / 120/120 according to test method ISO 1741-2008, which means: Integrity: do not cause cracks translucent smoke / fire for 120 minutes, lnsutasi: for 120 minutes , the maximum temperature rise in the surface of the back side of the test sample (unexposed surtace) not tebih of 18dC or an average temperature rise of no more than 14dC above the initial temperature.

5. Because of the cost savings structure and material properties of AAC is very light (for floor panels 650-750 Kg / M3) it will automatically reduce the dimensions of foundations, columns and beams. Thus the volume of concrete and also pembesian will be reduced which will result in a decrease in the cost structure.

THANKYOU