Cat van loi cable tray - cable ladder - trunking catalog

CAT VAN LOI CO., LTD 504 Le Quang Dinh Street, Go Vap District, Ho Chi Minh City, S.R Vietnam.

Tel: (84.8) 5886496/ 8956808/2464699 ; Fax: (84.8) 5886505

Website:www.catvanloi.com E-mail: [email protected]/ [email protected]

Manufactured in the compliance with : TCVN 3781-1983, TCVN 5026-1989, TCVN 5408:1991, TCVN 197:2002 and NEMA VE 1-2002/CSA C22.2 No. 126.1-02

CABLE TRAY CABLE LADDER

CABLE TRUNKINGACCESSORIESCATALOGUE

Website: www.catvanloi.com ; E-mail: [email protected]

Page 1

CABLE TRUNKING1. Straight trunking:

Cable trunking system is a mean of hanging support for power and control cables and is used in variety of commercial and industrial installations.

Standard Specifications: Materials: Stainless steel, galvanized steel or black steel (finish: powder coated or hot dipped galvanize)

Standard length: 2.44 meters or 2.5 meters. Standard Colour:

White, grey or orange. Other colors are available upon request. Dimension:

Width (mm) Height (mm) Thickness (mm)50175 25100 1.0 200 50100 1.2 300 50100 1.5

2. Flat bend trunking:

Flat bend trunking used to turn cable trunking on the right or on the left on the same plane. It used cable trunking systems.

Standard Specification: Materials: Stainless steel, steel or galvanized steel. Standard Colour: (Finish : powder coated or hot dipped galvanize)

White, grey or orange. Other colors are available upon request. Dimension: Width (mm) Height (mm) Thickness (mm)

50 150 25 100 1.0 200 50 100 1.2 300 50 100 1.5

3. Flat tee trunking:

W

H

10

W

50

Ln

Ln


Page 2

Flat tee trunking used to turn cable trunking to the other way on the same plane. It used to connect straight trungking and cable trunking fittings by straight coupler in cable trunking systems.

Standard Specification:Materials: Stainless steel, steel or galvanized steel.

Standard Colour: (Finish : powder coated or hot dipped galvanize) White, grey or orange. Other colors are available upon request. Dimension:

Width (mm) Height (mm) Thickness (mm) 50 175 25 50 1.0100 200 50 100 1.2 300 50 100 1.5

4. Flat four way trunking:

Flat four way trunking used to turn one branch of cable trunking on the same plane. It used to connection straight trunking and cable trunking by straight coupler in cable trunking systems.

Standard Specification: Materials : Stainless steel, steel or galvanized steel. Standard Colour: (Finish : powder coated or hot dipped galvanize) White, grey or orange. Other colors are available upon request. Dimension:

Width (mm) Height (mm) Thickness (mm)50175 2550 1.0 200 50100 1.2 300 50100 1.5

5 .90 degrees bend trunking:

W 50

50

H W

L

Lw

W

50

W

H

L

w

H

50

Ln

LnH

W


Page 3

Bend 900 trungking used to turn the cable trunking to the other way in quadrature on the same

plane of cable trunking systems. It used to connect straight trunking and cable trunking fittings by straight coupler and angle coupler in cable trunking systems.


Standard Colour: (Finish : powder coated or hot dipped galvanize) White, grey or orange. Other colors are available upon request.

Dimension:Width (mm) Height (mm) Thickness (mm)

50175 2550 1.0 200 50100 1.2 300 50100 1.5

6. Reducer trunking:

Reducer trunking used to reduce width of straight trunking. Reduces are available in any prime width/reduced width combination.


Standard Colour: (Finish : powder coated or hot dipped galvanize) White, grey or orange. Other colors are available upon request.

7. Straight couple trunking:

Straight couples trunking used to connect straight trunking or straight trunking with degrees bends, equal tees in the cable trunking systems.

Standard Specification:

W1

A

BA

W2

10

H


Page 4

Materials: Stainless steel, steel or galvanized steel. Standard Colour: (Finish : powder coated or hot dipped galvanize)

White, grey or orange. Other colors are available upon request.

8. End cap trunking:

At the and cap cable trunking or cable trunking systems. Standard Specification: Materials: Stainless steel, steel or galvanized steel. Standard Colour: (Finish : powder coated or hot dipped galvanize)

White, grey or orange. Other colors are available upon request. Dimension:

Width (mm) Height (mm) Thickness (mm)50 150 25 100 1.0 200 50 100 1.2 300 50 100 1.5

Cable Trungking are manufactured in the compliance with : TCVN 3781 - 1983, TCVN 5026 -1989, TCVN 5408 : 1991, TCVN 197 : 2002 and NEMA VE 1-2002/CSA C22.2 No 126.1-02 and tested by QUATEST 3.

W

50

H


Page 5

CABLE TRAY

1. Straight tray:

Straight trays are suitable for installation of average and heavy duty power cables.

Standard Specifications: Materials: Stainless steel, steel or galvanized steel.

Standard length: 2.44 meters or 2.5 meters. Standard color: (Finish : powder coated or hot dipped galvanize)

White, grey, or orange. Other colors are available upon request.

Dimension: Width (mm) Height (mm) Thickness (mm)

100200 25-50 1.0 300 25-50 1.2

150300 50-100 1.5450600 25-50 1.5450600 50-100 2.0

WH


Page 6

2.Flat bend tray:

Flat bend tray used to turn the tray system on the right or on the left on the same. To connect the straight trays or straight tray with other bend or equal tee by straight coupler in cable tray system.


Standard color: (Finish : powder coated or hot dipped galvanize) White, grey, or orange. Other colors are available upon request.

Dimension:

Width (mm) Height (mm) Thickness (mm)100200 25-50 1.0 300 25-50 1.2

150300 50-100 1.5450600 25-50 1.5450600 50-100 2.0

A

W

150100


Page 7

3. Flat tee tray:

Flat tee tray used to turn the tray system on the other way on the same plane. To connect the straight trays or straight tray with other bend or equal tee by straight coupler in cable tray system.


Standard color: (Finish : powder coated or hot dipped galvanize) White, grey or orange. Other colors are available upon request.

Dimension:

Width (mm) Height (mm) Thickness (mm)100 200 25 50 1.0 300 2550 1.2

150300 50100 1.5450600 2550 1.5450600 50100 2.0

A

W

100

W

H

B

150

100


Page 8

4. Flat four way tray:

A

W W

H

100

Flat four way tray used to turn the tray system on the other way on the same plane. To connect the straight trays or straight tray with other bend or equal tee by straight coupler or angle couple in cable tray system.



Dimension:

Width (mm) Height (mm) Thickness (mm)100200 2550 1.0 300 2550 1.2

150300 50100 1.5450600 2550 1.5450600 50100 2.0


Page 9

5. 90 degrees internal and external bend tray:

Internal and external bend tray used to turn cable tray to quarter on the same plane. It used to connect straight trays or degrees flat bends. Equal tee by straight coupler in cable tray systems.



Dimension:

Width (mm) Height (mm) Thickness (mm)100200 2550 1.0 300 2550 1.2

150300 50100 1.5450600 2550 1.5450600 50100 2.0

B

C

D

W

H

B

H

D

H


Page 10

6. Reducer tray:

Reducer tray used to reduce the width of straight trays or width of degrees flat bends, width of equal in cable tray systems.



7. Straight coupler tray:

Straight couple tray used to connect straight trays or straight trunking with degrees flat bend, flat equal tee in cable tray systems.



W1

W1

A

B

A

10

H


Page 11

8. Angle coupler tray:

Angle coupler tray used to connect straight trays or straight trunking with degrees flat bend, flat equal tee in cable tray system.



Cable Tray are manufactured in the compliance with : TCVN 3781 - 1983, TCVN 5026 -1989, TCVN 5408 : 1991, TCVN 197 : 2002 and NEMA VE 1-2002/CSA C22.2 No 126.1-02 and tested by QUATEST 3.


Page 12

CABLE LADDER1. Straight ladder:

Cable ladders are manufactured for install of power cable in the heavy cable distributions of power station, and main power system of buildings. This type of ladder is produced in 2.5 meters length.

Standard Specification: Materials: Stainless steel, steel or galvanized steel.

Standard length: 2.44 meters or 2.5 meters. Standard Colour: (Finish : powder coated or hot dipped galvanize)

White, grey or orange. Other colours are available upon request. Dimension:

Width (mm) Height (mm) Thickness (mm)200850 50100 1.5

9001100 50100 2.0

2. Flat bend ladder:

Flat bend ladder used to turn ladder system on the right or on the left on the same panel. It used

to connect straight ladders and cable degrees flat bend, equal tee by straight coupler in cable ladder systems.


Standard Colour: (Finish : powder coated or hot dipped galvanize) White, grey or orange. Other colours are available upon request. Dimension:


W

80

10

W

W15

0

A


Page 13

3. Flat tee ladder:

Flat tee ladder used to turn cable ladder system on the right or on the left on the same plane. It used to connect straight ladders or degrees flat bends, equal tee by straight couple in the cable ladder system.


Standard Colour: (Finish : powder coated or hot dipped galvanize) White grey or orange. Other colours are available upon request. Dimension:


9001100 50100 2.04. Flat four way ladder:

Flat four way ladder used to turn cable ladder system to any way on the same plane. It used to connect straight ladders or degrees flat bends, equal tee by straight couple in the cable ladder system.

Standard Specification Materials: Stainless steel, steel or galvanized steel.

Standard Colour: (Finish : powder coated or hot dipped galvanize) White grey or orange. Other colours are available upon request.


200850 50100 1.59001100 50100 2.0

W

150

300

H

L

W

W1=W

300

150

W2=WW

3=W

300 150

W4=W150


Page 14

5 .90 degrees internal bend ladder; external bend ladder:Internal bend ladder, external bend ladder used to turn cable ladder system to quarter on the

same plane. It used to connect straight ladders or degrees flat bends, equal tee by straight couple in the cable ladder system.


Standard Colour: (Finish : powder coated or hot dipped galvanize) White grey or orange. Other colours are available upon request.


200850 50100 1.59001100 50100 2.0

6. Reducer ladder:

Reducer ladder used to reduce the width of straight ladders or width of degrees flat bends,

width of equal tee on the same plane. Standard Specification


White, grey or orange. Other colours are available upon request.

W

H

200

150

W1

W2

W1

W1

H

150

200

W


Page 15

7. Straight couple:

Straight couple used to reduce the width of straight ladders or width of degrees flat bends,

width of equal tees on the same plane. Standard Specification


White, grey or orange. Other colours are available upon request.Cable Ladder are manufactured in the compliance with : TCVN 3781 - 1983, TCVN 5026 -1989, TCVN 5408 : 1991, TCVN 197 : 2002 and NEMA VE 1-2002/CSA C22.2 No 126.1-02 and testedby QUATEST 3.

PRODUCT SUMMARYSHEET A B C D

1 STRAIGHT LENGTH

2 HORIZONTAL ELBOW

3 HORIZONTAL ELBOW CURVE TYPE

4 HORIZONTAL TEE

5 FLAT CURVE TEE

10

H


Page 16

6 HORIZONTAL CROSS

7 CURVE CROSS

8 CONCENTRIC REDUCTION COUPLING

9 RIGHT REDUCTION COUPLING

10 LEFT REDUCTION COUPLING

11 VERTICAL TEE

12 VERTICAL ELBOW

13 VERTICAL ELBOW CURVE TYPE

14 WALL BRACKET SUPPORT ANGLE

15 STRUT ARM


Page 17

16 BLIND END CAP

17 HORIZONTAL HINGE CONNECTOR

18 VERTICAL HINGE CONNECTOR

19 STRAIGHT CONNECTOR

20 STAND CONNECTOR

21 HOLD DOWN CLAMP

22 CLEVIS HANGER

23 J-LOCK AND U CHANEL

18

CAT VAN LOI – QUALITY TRUST OF EACH PROJECT

Cat Van Loi Co., Ltd commits to our customers the following points:

Superior quality products & good services with competitive prices

Continuous quest for self- improvement

Enhancing Response time to customer’s requirement and just-in-time

delivery to meet customer’s requirement

Ensuring competitiveness through the provision of value added products

and superior customer service

CAT VAN LOI CO., LTD 504 Le Quang Dinh Street, Go Vap District, Ho Chi Minh City, S.R Vietnam.

Tel: (84.8) 5886496/ 8956808/2464699 ; Fax: (84.8) 5886505

Website:www.catvanloi.com E-mail: [email protected]/ [email protected]

Sales

Cat van loi cable tray - cable ladder - trunking catalog