Upload
soni-sharma
View
736
Download
1
Tags:
Embed Size (px)
DESCRIPTION
In order to guide you, to know how to install a centrifugal pump, we (pumpkart.com) shares Presentation. By watching this presentation thoroughly, you can understand the process of centrifugal pump installation better. Pumpkart.com is committed to help its customers by providing all kind of support from guidance to delivery pumps at your step. At pumpkart you can choose a pump of your choice from the world famous pumps manufacturers at best prices.
Citation preview
How To Install a
Centrifugal Water Pump
Installation Process
First of all, consult the manual book to
determine the right
process of installation
Make Base Plate Inspection
Check the Pump Impeller, it can be turned by hand
If it cannot be turned, open the pump casing to look for obstructions
Turn the shaft clockwise by using a deep socket wrench on the Impeller nut
Open all the body parts of centrifugal pumps and clean them properly
Clean out any corrosion build up on the impeller
If necessary, coat the underside of the base plate to prevent the rust
Pump Installation
Place
Locate the pump near to the water source
Adequate Space For Operation, Inspection And Maintenance
Base Plate Pumps Foundation
Grouted on a concrete foundation, which has been poured on a solid footing
Ensure Solid Foundation
So that it will be able to absorb any vibration
Able to provide a rigid and permanent support for the pumping Unit
Use good quality suction hose that will not be collapsed by suction
Check all fittings and connections in the suction line for tightness
Tools Required For Installation
•Hammer•Worm gear saw with diamond blade•Rebar cutters•Concrete mixer•Concrete vibrator•Lifting device •Hand tools•Chipping hammer•Pressure washer•Epoxy adhesive •Rebar tie wire
Correct Installation and Maintenance of a Centrifugal Pump Ensure Trouble Free Service
Visit www.pumpkart.com to buy Pumps online and take guidance on their
installation and Maintenance