Upload
ecofasten-solar
View
138
Download
0
Tags:
Embed Size (px)
DESCRIPTION
The GreenFasten™ bracket system is one of the fastest, easiest to install solar array attachment mounts in the industry. Compatible with a variety of bracket options, GreenFasten™ delivers a mounting solution for virtually all new or existing composition shingle roofs.
Citation preview
How Do You AttachJust About Anything
To Just About Any Roof?
GreenFasten™ Works With Virtually All Roof Racks and Accessories
Versatile
Modular
Compatible
GreenFasten™
GreenFasten™
Residential Use
Bolts directly to roof.
Slate, Shake...
Tile…
Shingles…
And More.
Green-Fasten For residential use No base plate Uses 1 lag bolt – 2 bolt
version available. Various flashings available Assorted Attachment
Brackets / Compression Blocks
How does GreenFasten™ work?
Rubber-Gasketed Flashing that fits under shingles to form a watertight seal.
Fastened Directly to Roof – into Rafter.
Cone-shaped fitting on bottom of top attachment block.
Rubber Gasketed Flashing that fits under shingles to form a watertight seal.
Fastened Directly to Roof – into Rafter.
Cone-shaped fitting on bottom of top attachment block.
Gasketed Aluminum Flashing is available in Black or Mill finish.
Many compression brackets are available.
Installing Green-Fasten Measure, locate the
rafter, snap a line, mark the spot…
Center the Green-Fasten flashing over the rafter.
The upper end of the flashing should be under the next row of shingles.
Drill a pilot hole through the roof material, deck and into the rafter..
Secure the bracket and flashing to the roof and into the rafter using a 3” minimum lag bolt and neoprene-bonded washer.
GreenFasten™ with L-Foot on Asphalt Shingles.GreenFasten™
with Z-Bracket on Asphalt Shingles.
GreenFasten™