2. Step 1: Analyze Your Audience and Purpose
- What will your reader expect?
3. Step 1: Analyze Your Audience and Purpose
- Will you need to create different instructions for different
audiences?
4. Step 1: Analyze Your Audience and Purpose
- Will your reader be anxious about the information?
5. Step 1: Analyze Your Audience and Purpose
- Will the environment affect the design?
6. Step 2: Plan for Safety
- Write safety information in SIMPLE SENTENCES.
- NO:It is required that safety glasses be worn when inside this
laboratory.
- Yes :Wear safety goggles in this laboratory.
- Yes : Safety Goggles Required.
7. Step 3: Use Signal Words
- For an immediate and serious hazard that will likely be
fatal.
- DANGER: EXTREMELY HIGH VOLTAGE.STAND BACK.
8. Step 3: Use Signal Words
- For the potential for serious injury or death or serious damage
to equipment.
- TO PREVENT SERIOUS INJURY, BE SURE THE ARM RESTRAINTS ARE IN
PLACE BEFORE OPERATING THIS MACHINERY
9. Step 3: Use Signal Words
- For anything from moderate injury to serious equipment damage
or destruction.
- Do not use rechargeable batteries in the charging unit they
could damage the charging unit.
10. Step 3: Use Signal Words
- For tips or suggestions to help readers carry out procedures
successfully.
- Note: Locking washers and regular washers are provided be sure
to use the locking washers here.
11. Step 4: Draft Your Title
-
- How to Construct a Lego Space Ship.
-
- Constructing a Lego Space Ship
-
- Note : Avoid Long Noun Phrases
-
- Lego Space Ship Construction Instructions
12. Step 5: Draft Your Introduction
- Who should carry out this task?
- What general safety or operating tips should the reader know
before beginning?
- What items will the reader need?
- How long should the task take?
13. Step 6: Draft Your Step-by-Step Instructions Note: The steps
are the most important part of the instruction set.Every extra
caution should be taken here to be clear and effective. 14. Step
6.1: Number the Steps
- Although bullets are used for similar items in a
list,numbersshould be used when a sequence of events is
required.
- For long, complex instructions, use two level numbering:
15. Step 6.2: Present the right amount of information in each
step.
- Danger:Too much information!
-
- Mix one part cement with one part water, using a trowel. When
the mixture is a thick consistency without any lumps bigger than a
marble, place a strip of the mixture about 1 high and 1 wide along
the face of the brick.
-
- Danger : Too Little Information!
16. Step 6.2: Present the right amount of information in each
step.
-
- Mix one part cement with one part water, using the trowel,
until the mixture is a thick consistency.
-
- Place a strip of the mixture about 1 high and 1 wide along the
fact of the brick.
17. Step 6.3: Use the Imperative Mood
- Yes:Use the imperative mood
- No:The imperative mood should be used
18. Step 6.4:Use StepsandFeedback Statements (and dont confuse
the two!)
- Complete the Instruction Set Assignment.
- You are now nearly done with English 202C.
- Use different formatting to distinguish the two.
19. Step 6.5: Use Graphics and Clear Language
- Consider using visuals for nearly every step.
- Avoid a cluttered document.
- Align your graphics with the corresponding text.
- Dont omit articles (a, an, the) to save space.
20. 21. Step 7: Write Your Conclusion
- Tell the reader he/she is done.
- Tell the reader what he/she should do next.
- Include maintenance and/or troubleshooting tips, if
applicable.