Upload
gbekele77
View
364
Download
0
Embed Size (px)
Citation preview
Before or
after?
Before November
2010
AfterNovember 2010
0-12 months
0-12 months
Or 12+months
12+ months
Home
DFR’s continue to occur? No
Treadmill is operational
Home
Yes
Verify the power set up for the
treadmills
Follow instructions in Power Set Up for Treadmills
DO NOT CONTINUE UNTILL VERIFIED
Home
Check the MCB to
determine what version software is inside
Follow instructions in Determining MCB Software
Home
DFR’s continue to occur?
Yes
No Treadmill is operational
Home
The running belt may be dirty. Clean
between the belt and deck
Follow instructions in Cleaning Between the Belt and Deck
Home
DFR’s
continue to occur?
Yes
No Treadmill is operational
Home
Follow instructions in Tensioning the Running Belt
Re-tension running belt. If the running belt is over tensioned, it will cause the motor to pull more current
Home
DFR’s continue
to occur?
Yes
No Treadmill is operational
Home
Check the drive belt tension. If
the drive belt is over-
tensioned, it will cause
the motor to pull more current
Follow instructions in Checking the Drive Belt Tension
Home
DFR’s continue
to occur?
Slide 25Yes
No Treadmill is operational
Home
The running belt may be dirty. Clean
between the belt and deck
Follow instructions in Cleaning Between the Belt and Deck
Home
DFR’s
continue to
occur?
Treadmill is operational
Has the treadmill been in use for over
24 months?
Yes No
Home
No
The running belt may be worn out. Check the
condition of the running belt
Follow instructions in Checking the Condition of the Running Belt
Home
DFR’s continue
to occur?
Yes
No Treadmill is operational
Home
Check the drive
belt tension. If the drive belt is over-tensioned, it will cause the motor
to pull more current
Follow instructions in Checking the
Drive Belt Tension
Home
If the power source
has not been checked and the DFR codes (80 or 800) occur, it is
most likely that the in issue is with the
power source
Follow instructions in Power Set Up for Treadmills
Treadmill is operational
Home
The running belt may be dirty. Clean
between the belt and deck
Follow instructions in Cleaning Between the Belt and Deck
Home
The running belt may be worn our. Check the
condition of the running belt
Follow instructions in Checking the
Condition of the Running Belt
Home
DFR’s continue
to occur?
Yes
No Treadmill is operational
Home
DFR’s continue
to occur?
Yes
No Treadmill is operational
Home
DFR’s continue
to occur?
Yes
No Treadmill is operational
Home
Check the MCB to
determine what version software is
inside
Follow instructions in Determining
MCB Software
Home
If the power
source has not been checked and the DFR codes (80 or 800) occur, it is
most likely that the issue is with
the power source.
Follow instructions in Power Set
Up for Treadmills
Treadmill is operational
Home