Upload
rakesh-dasgupta
View
6.476
Download
0
Embed Size (px)
Citation preview
DM : Validation Class – Absolute tolerance LimitDM : Validation Class – Absolute tolerance Limit
Presented By : Rakesh DasguptaPresented By : Rakesh Dasgupta
Content at : http://wp.me/p1Ci5jContent at : http://wp.me/p1Ci5j--1p1p
Validations in Device Management IValidations in Device Management I
In the SAP system we have Validations for the Meter Reading Results.
There are 2 types of Validations.
1. Independent Validations.
2. Dependent Validations.
Menu path in customizing is Device Management -> Meter Reading -> Validations.
We also have User defined Validations.Menu path in customizing is Tools -> System Modifications -> User Defined
Validations.Validations.
Independent ValidationsIndependent Validations
•Validation that applies to one specific register.
•Fixed independent validations are carried out automatically in the system.
•Variable independent validations are carried out based on customizing settings.
Fixed Independent Validations Fixed Independent Validations are
•95 (previous meter reading implausible)
•96 (fixed value deviation validation)
•97 (resetting register validation)
Variable Independent Validations areVariable Independent Validations are•01 (zero consumption)
•02 - 04 (permitted number of meter readings by the customer, estimations
and estimations + meter readings by the customer)
•05-07 (tolerance limits, absolute, relative and floating)
•11 (usage hours greater than usage hours of previous period)
•12 (usage hours compared to fixed value)
•13 (current demand compared to maximum demand)
Validations in Device Management IIValidations in Device Management II
•13 (current demand compared to maximum demand)
•14 (current demand compared with minimum demand)
•15 (meter overflow)
Dependent Validations
Validation that applies to several registers in one device or
installation
Validations :
•Active/reactive relationship 01
•Serial switching relationship 02
•On-/off peak relationship 03
Validations in Device Management IIIValidations in Device Management III
•On-/off peak relationship 03
•Control relationship 04
•Volume correction factor relationship 05
•Volume correction factor calculation relationship 06
•Resetting register relationship 07
For more info on Validations check out the Customizing path in the SAP system
Independent Validation Allotted : Independent Validation Allotted : 05 Tolerance Limit Absolute05 Tolerance Limit Absolute
Comparison Period for 0001 defined as 1.Comparison Period for 0001 defined as 1.(1 month comparison)(1 month comparison)
Tolerance Limits of Independent ValidationsTolerance Limits of Independent Validations
For consumption 0 to 399
1. Warning displayed
+dev 20 units and –dev 20 units+dev 20 units and –dev 20 units
2. Error displayed
+dev 30 units and -30 units
For Consumption 400 to ….
1. Warning displayed
+dev 20 units and –dev 20 units
2. Error displayed
+dev 30 units and -30 units