Upload
nick-pruehs
View
306
Download
5
Embed Size (px)
Citation preview
Game ProgrammingPhysics
Nick Prühs
Objectives
• To understand the basics of kinematics and dynamics in games
• To get an overview of a simple numeric integration approach for
phyics
• To learn how to resolve rigid body collisions
2 / 83
Motivation
• Next thing to make your game feel right, besides graphics and
sound
• Can be integral part of your gameplay
• Usually just a close approximation to real physics will be enough
“Speedy thing goes in, speedy thing comes out.”
- GLaDOS
3 / 83
Kinematics vs. Dynamics
• Kinematics is the study of movement over time.
Doesn’t matter why things are where there are now
Doesn’t matter what causes the movement
Just deals with the actual movement itself
• Dynamics is the study of forces and masses that cause kinematic
quantities to change over time.
4 / 83
Kinematics – Velocity
Velocity is the rate of change of position over time.
5 / 83
𝒗 =𝒅𝒙
𝒅𝒕
Kinematics – Acceleration
Acceleration is the rate of change of velocity over time.
6 / 83
𝒂 =𝒅𝒗
𝒅𝒕
Change of velocity
Solving for v and integrating yields the velocity after a given time t,
aside from some unknown constant C:
7 / 83
𝐚 =𝐝𝐯
𝐝𝐭
𝒅𝒗 = 𝒂 𝒅𝒕
𝒗(𝒕) = න𝒂 𝒅𝒕
𝒗(𝒕) = 𝒂𝒕 + 𝑪
Change of velocity
We can find the unknown constant to be the initial velocity by
computing the initial velocity:
8 / 83
𝒗 = 𝒂𝒕 + 𝑪
𝒗𝟎 = 𝟎𝒂 + 𝑪
𝒗𝟎 = 𝑪
Change of velocity
Thus, given the acceleration a and initial velocity v0, the velocity after
any given time t is
9 / 83
𝒗(𝒕) = 𝒂𝒕 + 𝒗𝟎
Change of position
The position after any given time t can be found the same way:
10 / 83
𝐯 =𝐝𝐱
𝐝𝐭
𝒅𝒙 = 𝒗 𝒅𝒕
𝒅𝒙 = 𝒂𝒕 + 𝒗𝟎 𝒅𝒕
𝒙(𝒕) = න𝒂𝒕 + 𝒗𝟎 𝒅𝒕
𝒙(𝒕) =𝟏
𝟐𝒂𝒕𝟐 + 𝒗𝟎𝒕 + 𝒙𝟎
Kinematics – Momentum
Momentum is the product of the mass and velocity of an object.
11 / 83
𝒑 = 𝒎𝒗
Dynamics – Force
Force is the rate of change of momentum over time (Newton’s Second
Law).
12 / 83
𝑭 =𝒅𝒑
𝒅𝒕
Change of acceleration
For constant mass, force and acceleration are related as follows:
13 / 83
𝐹 = 𝐝𝐩
𝐝𝐭
definition force
= 𝒅 𝒎𝒗
𝒅𝒕
definitionmomentum
=𝒎𝒅𝒗
𝒅𝒕
constant mass
= 𝒎𝒂 definition acceleration
Numerical Integration
• Start at a certain initial position and velocity
• Take a small step forward in time to find the velocity and position at
the next time value
• Do this repeatedly to go forward in time in small increments, each
time taking the results of the previous integration as the starting
point for the next
14 / 83
Explicit Euler Integration
C#
15 / 83
// Fixed time step and constant force.const float dt = 1;const float force = 10.0f;
// Create new body without initial velocity.var body = new Body
Mass = 1.0f,Position = 0.0f,Velocity = 0.0f
;
// Simulate ten steps.for (float t = 1; t <= 10; t++)
body.Position += body.Velocity * dt;var acceleration = force / body.Mass;body.Velocity += acceleration * dt;
Explicit Euler Integration
t position velocity
1 0 10
2 10 20
3 30 30
4 60 40
5 100 50
6 150 60
7 210 70
8 280 80
9 360 90
10 450 100
16 / 83
Explicit Euler integration with dt = 1
Inaccuracy
𝒙 = 𝟎. 𝟓𝒂𝒕𝟐 + 𝒗𝒕 + 𝒙𝟎 with 𝒂 = 𝟏𝟎, 𝒕 = 𝟏𝟎, 𝒗 = 𝟎, 𝒙𝟎 =𝟎
= 0.5 × 10 × 102 + 0𝑡+ 0
= 0.5 × 10 × 100
= 500
17 / 83
Exact physical position at t = 10 is:
This implies an error of (500 – 450) / 500 = 10% after only ten seconds for dt = 1!
Explicit Euler Integration
t position velocity
1 4.5 10
2 19 20
3 43.5 30
4 78 40
5 122.5 50
6 177 60
7 241.5 70
8 316 80
9 400.5 90
10 495 100
18 / 83
Explicit Euler integration with dt = 0.1
Variable vs. fixed time steps
Usually, we’re working with variable time steps in game simulations:
However, this approach has major drawbacks in when simulating
physics.
19 / 83
public void Update(float deltaTime)
// Do something awesome here...
Variable time steps in physics
• Physics will “feel” slightly different depending on your framerate
• Fast objects won’t collide as expected
• Spring simulation will explode to infinity
20 / 83
Fixed time steps in physics
• In order to ensure a fixed time step that feels right, we need to have
the physics simulation …
Don’t update too often if frames are rendered very fast
Catch up if frames are rendered very slowly
• This is achieved by accumulating deltas across frames, updating
several times per frame if necessary.
21 / 83
Fixed time steps in physics
C#
22 / 83
var random = new Random();
// Fixed time step and constant force.const float fixedDt = 1f / 60f;const float force = 10.0f;float totalTime = 0.0f;float accumulatedDt = 0.0f;
// Create new body without initial velocity.var body = new Body Mass = 1.0f, Position = 0.0f, Velocity = 0.0f ;
// Simulate ten steps.for (int t = 0; t <= 10; t++)
// Random delta.float dt = (float)random.NextDouble() / 45;
totalTime += dt;accumulatedDt += dt;
while (accumulatedDt > fixedDt)
var acceleration = force / body.Mass;body.Velocity += acceleration * fixedDt;body.Position += body.Velocity * fixedDt;
accumulatedDt -= fixedDt;
Fixed time steps in physics
t dt accumulatedTime position velocity
0 0.022 0.022 0 0
0 0.022 0.005 0.003 0.167
1 0.020 0.026 0.003 0.167
1 0.020 0.009 0.008 0.333
2 0.005 0.014 0.008 0.333
3 0.003 0.017 0.008 0.333
3 0.003 0 0.017 0.500
4 0.011 0.011 0.017 0.500
5 0.019 0.030 0.017 0.500
5 0.019 0.013 0.028 0.667
23 / 83
Fixed time steps with dt = 1 / 60 = 0.016
Gotcha!
Accumulated time steps can cause an infinite loop if your physics simulation takes more time than your fixed time
step!
Clamp at a maximum number of simulation steps per frame to avoid this.
24 / 83
Rigid bodies
• All of the above assumes a constant mass concentrated in a single
point
• However, in games we have to deal with bodies having their mass
distributed over their area (or volume)
• Rigid bodies are shapes that don’t change or deform during physics
simulation
• We’ll focus on these for the time being
25 / 83
Rigid bodies
• For the time being, we’ll model our rigid body as a set of point
masses
• The total momentum of the rigid body equals the sum of all
momentums of all points that make up that body
𝑝𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦 =
𝑖
𝑚𝑖𝑣𝑖
26 / 83
Center of mass
We define the center of mass of a rigid body as the linear combination
of the position vectors of all points that make up that body, weighted by
their masses, divided by the total mass of the body.
𝑥𝐶𝑒𝑛𝑡𝑒𝑟𝑂𝑓𝑀𝑎𝑠𝑠 =σ𝑖 𝑥𝑖𝑚𝑖
𝑀𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦
27 / 83
Center of mass
Let’s modify this equation a bit:
28 / 12
𝑥𝐶𝑒𝑛𝑡𝑒𝑟𝑂𝑓𝑀𝑎𝑠𝑠 = σ𝑖 𝑥𝑖𝑚𝑖
𝑀𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦
𝑀𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦𝑥𝐶𝑒𝑛𝑡𝑒𝑟𝑂𝑓𝑀𝑎𝑠𝑠 =
𝑖
𝑥𝑖𝑚𝑖multiplied with
𝑀𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦
𝑑(𝑀𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦𝑥𝐶𝑒𝑛𝑡𝑒𝑟𝑂𝑓𝑀𝑎𝑠𝑠)
𝑑𝑡
=
𝑖
𝑑(𝑥𝑖𝑚𝑖)
𝑑𝑡
𝑑/𝑑𝑡
=
𝑖
𝑚𝑖
𝑑𝑥𝑖𝑑𝑡
constant mass
=
𝑖
𝑚𝑖𝑣𝑖definition velocity
= 𝑝𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦 definition momentum
Center of mass
Now, let’s take a look at the second part again:
29 / 83
𝑑(𝑀𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦𝑥𝐶𝑒𝑛𝑡𝑒𝑟𝑂𝑓𝑀𝑎𝑠𝑠)
𝑑𝑡
=𝑀𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦
𝑑𝑥𝐶𝑒𝑛𝑡𝑒𝑟𝑂𝑓𝑀𝑎𝑠𝑠𝑑𝑡
constantmass
= 𝑀𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦𝑣𝐶𝑒𝑛𝑡𝑒𝑟𝑂𝑓𝑀𝑎𝑠𝑠 definition
velocity
Center of mass
Combining both results yields a stunning property
of the center of mass!
𝒑𝑹𝒊𝒈𝒊𝒅𝒃𝒐𝒅𝒚 = 𝑴𝑹𝒊𝒈𝒊𝒅𝒃𝒐𝒅𝒚𝒗𝑪𝒆𝒏𝒕𝒆𝒓𝑶𝒇𝑴𝒂𝒔𝒔
30 / 83
Center of mass
Combining both results yields a stunning property
of the center of mass!
𝒑𝑹𝒊𝒈𝒊𝒅𝒃𝒐𝒅𝒚 = 𝑴𝑹𝒊𝒈𝒊𝒅𝒃𝒐𝒅𝒚𝒗𝑪𝒆𝒏𝒕𝒆𝒓𝑶𝒇𝑴𝒂𝒔𝒔
For finding the momentums of any rigid body, we
can treat that body as single point mass and
velocity.
31 / 83
Center of mass
This further applies to forces, as well:
32 / 83
𝐹𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦 = 𝑑𝑝𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦
𝑑𝑡
= 𝑑(𝑀𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦𝑣𝐶𝑒𝑛𝑡𝑒𝑟𝑂𝑓𝑀𝑎𝑠𝑠)
𝑑𝑡
as we’ve just proven
=𝑀𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦
𝑑𝑣𝐶𝑒𝑛𝑡𝑒𝑟𝑂𝑓𝑀𝑎𝑠𝑠𝑑𝑡
constant mass
= 𝑀𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦𝑎𝐶𝑒𝑛𝑡𝑒𝑟𝑂𝑓𝑀𝑎𝑠𝑠 definition acceleration
Center of mass
This further applies to forces, as well:
We can treat all forces acting our rigid body as if
their sum is acting on a point at the center of mass
with the mass of the entire body.33 / 83
𝐹𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦 = 𝑑𝑝𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦
𝑑𝑡
= 𝑑(𝑀𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦𝑣𝐶𝑒𝑛𝑡𝑒𝑟𝑂𝑓𝑀𝑎𝑠𝑠)
𝑑𝑡
as we’ve just proven
=𝑀𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦
𝑑𝑣𝐶𝑒𝑛𝑡𝑒𝑟𝑂𝑓𝑀𝑎𝑠𝑠𝑑𝑡
constant mass
= 𝑀𝑅𝑖𝑔𝑖𝑑𝑏𝑜𝑑𝑦𝑎𝐶𝑒𝑛𝑡𝑒𝑟𝑂𝑓𝑀𝑎𝑠𝑠 definition acceleration
Rotation
• So far, we’ve been talking all about linear momentum and linear
acceleration.
• Now, we want to figure out how forces applied to our rigid bodies
make them rotate.
• Where these forces are applied to the body will play an important
role.
34 / 83
Kinematics – Orientation
The orientation Ω of an object is the angular difference between the
world coordinate system and a coordinate system fixed in that object, in
radians.
35 / 83
Kinematics – Angular Velocity
Angular Velocity is the rate of change of orientation over time.
36 / 83
𝝎 =𝒅Ω
𝒅𝒕
Kinematics – Angular Acceleration
Angular Acceleration is the rate of change of angular velocity over time.
37 / 83
𝜶 =𝒅𝜔
𝒅𝒕
Linear Velocity from Angular Velocity
• We often need to find the velocity of an arbitrary point on our object
i.e. velocity of colliding points to compute how hard they hit each
other
• Without rotation, the velocity of any point in the body is the same
Velocity of the center of mass
• With rotation, every point might have a different velocity
Obviously, we can’t keep track of the velocity of each of the
infinity of points
38 / 83
Linear Velocity from Angular Velocity
Claim:
The linear velocity of any point P inside an object that is rotating about
its origin O, but not translating, is given by the following equation:
39 / 83
𝒗𝑷 = 𝝎𝑶𝑷⊥
Hint
In 2D, the perpendicular of a vector (x, y) is (-y, x).
40 / 83
Linear Velocity from Angular Velocity - Proof
𝝎𝑶𝑷⊥ has the correct magnitude, because
and Ω 𝑶𝑷 is the length P is moving when moving Ω
radians along the arc whose radius vector is 𝑶𝑷 , by definition of radians.
41 / 83
𝜔𝑂𝑃⊥ = 𝜔 𝑂𝑃⊥
= 𝜔 𝑂𝑃 perpendicularydoesn’t change
length
= 𝑑Ω
𝑑𝑡𝑂𝑃
definition 𝜔
= 𝑑(Ω 𝑂𝑃 )
𝑑𝑡
𝑂𝑃 is constant
Linear Velocity from Angular Velocity - Proof
𝝎𝑶𝑷⊥ has the correct direction, because a point
rotating around another fixed point can only move
perpendicularly to the vector between the points,
or the movement wouldn’t be a simple rotation.
𝝎𝑶𝑷⊥ has the correct sign, because we’re
measuring Ω in the counterclockwise direction. ω
is positive when the point is rotating
counterclockwise. The perpendicular operator
points in the counterclockwise direction relative to
the radius vector.
42 / 83
Linear Velocity from Angular Velocity
The linear velocity of any point P inside an object that is rotating about
its origin O, but not translating, is given by the following equation:
43 / 83
𝒗𝑷 = 𝝎𝑶𝑷⊥
Linear Velocity from Angular Velocity
The linear velocity of any point P inside an object that is rotating about
its origin O, and is translating, is given by the following equation:
44 / 83
?
Chasles’ Theorem
• Chasles’ Theorem breaks up motion into linear and angular
components.
• We consider any movement of our rigid body as
translating a single point in the body
rotating the rest of the body around that point
45 / 83
Chasles’ Theorem
The linear velocity of any point P inside a moving object that is rotating
about its origin O is given by the following equation:
(without proof)
46 / 83
𝒗𝑷 = 𝒗𝑶 + 𝝎𝑶𝑷⊥
Kinematics – Angular Momentum
The Angular Momentum of a point P tells us how much of the linear
momentum pP of P is rotating around the origin.
47 / 83
𝑳𝑶𝑷 = 𝑶𝑷⊥ × 𝒑𝑷
Kinematics – Angular Momentum
The Angular Momentum of a point P tells us how much of the linear
momentum pP of P is rotating around the origin.
Note how angular momentum of a point P needs a reference (here: O),
in contrast to linear momentum.
48 / 83
𝑳𝑶𝑷 = 𝑶𝑷⊥ × 𝒑𝑷
Dynamics – Torque
Torque is the rate of change of angular momentum over time.
49 / 83
𝝉𝑶𝑷 =𝒅𝑳𝑶𝑷𝒅𝒕
Dynamics – Torque
We can use the torque to determine how much of the force applied at
point P is causing the object to rotate:
50 / 83
𝜏𝑂𝑃 = dLOPdt
definition torque
= d(OP⊥× pP)
dt
definitionangular momentum
=OP⊥ ×
dpp
dt+
dOP⊥dt
× ppproduct rule
= (OP⊥ × 𝐹𝑃) + (vP × 𝑝P) def. linear force,def. linear velocity
= OP⊥ × 𝐹𝑃 velocity and momentum of P are parallel
Calculating Angular Momentum
Again, just like change in velocity can be numerically integrated using
acceleration, change in angular momentum can be integrated using
torque, from an applied force and position of application:
𝐿𝑂𝑃 𝑡 = න𝜏𝑂𝑃 𝑑𝑡 = නOP⊥ × 𝐹𝑃 𝑑𝑡
51 / 83
Moment of Inertia
• The moment of inertia I of an object is a measure of how hard it is to
rotate the object about its center of mass.
• It is the sum of the squared distances from the center of mass to
each other point in the body, scaling each squared distance by the
mass of the respective point.
𝐼 =
𝑖
𝑚𝑖Oi⊥2
52 / 83
Moment of Inertia
The moment of inertia can be used to derive the total angular
momentum:
𝐿 =
𝑖
Oi⊥ × pidefinition
angular momentum
=
𝑖
Oi⊥ × (𝑚𝑖𝑣𝑖)Definition linear momentum
=
𝑖
Oi⊥ × (𝑚𝑖𝜔𝑂𝑖⊥)Linear velocity from angular
velocity
=𝜔
𝑖
Oi⊥ × (𝑚𝑖𝑂𝑖⊥)Angular velocity same for all
points i
=𝜔
𝑖
𝑚𝑖Oi⊥2
= 𝜔𝐼 definition moment of intertia
Hint
As the moment of inertia is based on the mass and relative
position of all points of a rigid body, only, it is constant and has
to be computed only once!
54 / 83
Dynamics – Torque
Integration shows how torque and angular acceleration are related:
𝜏 = 𝑑𝐿
𝑑𝑡definition torque
= 𝑑𝜔𝐼
𝑑𝑡
as we’ve just proven
=𝐼𝑑𝜔
𝑑𝑡
moment of inertia constant
= 𝐼𝛼 Definitionangular acceleration
55 / 83
Dynamics – Torque
Thus, knowing the torque on our body, we can compute angular
acceleration, and then find angular velocity and orientation by numeric
integration.
𝝉 = 𝑰𝜶
56 / 83
Full Physics Simulation – Setup
For each rigid body:
1. Calculate center of mass and moment of inertia at the center of
mass.
2. Set initial position, orientation, linear velocity and angular velocity.
57 / 83
Full Physics Simulation – Loop
For each rigid body:
1. Collect all forces on the body, including their points of application.
2. Sum all forces and compute linear acceleration.
3. Compute the torque caused by each force.
4. Sum all torque and compute angular acceleration.
5. Numerically integrate linear acceleration and angular acceleration to
update linear velocity and angular velocity, and position and
orientation.
58 / 83
Hint
Usually, games will treat both mass and moment of inertia as
properties of the rigid body.
59 / 83
Collision Response
• Given we know that there is a collision, the task is to find out how to
handle that collision.
• We need to decide where the colliding objects move, and if and how
they start spinning.
• By now, velocities never changes instantly, but by means forces
applied over time, only.
60 / 83
Impulse
• An impulse changes the momentum (and thus, the velocity) of a
rigid body instantly, without the need of integration over time.
• We’re going to use Newton’s Law of Restitution for Instantaneous
Collisions with No Friction to find the impulses to apply in case of a
collision.
61 / 83
Newton’s Law of Restitution for Instantaneous Collisions with No
Friction
• Instantaneous: in no time
• Restitution: coefficient of restitution models the compression and
restitution of impacting bodies with a single scalar
• No friction: impulse is entirely pointed in the direction of the collision
normal
62 / 83
Collision Data
• Collision point P
• Center of mass of both bodies A, B
• Velocity of the collision point of both bodies 𝑣𝐴, 𝑣𝐵• Collision normal n
63 / 83
Derived Collision Data
Relative velocity
𝑣𝐴𝐵 = 𝑣𝐴 − 𝑣𝐵
Relative normal velocity
𝑣𝐴𝐵𝑛 = 𝑣𝐴 − 𝑣𝐵 𝑛
64 / 83
Coefficient of Restitution
• The Coefficient of Restitution 𝜖 tells us how much of the incoming
energy is dissipated during the collision.
• 𝜖 = 1 yields a totally elastic collision (super ball)
• 𝜖 = 0 yields a totally plastic collision (all energy absorbed)
𝑣𝐴𝐵′ 𝑛 = −𝜖𝑣𝐴𝐵𝑛
65 / 83
Collision Impulse
By understanding the collision impulse j as change of momentum, we
expect the resulting velocities 𝑣𝐴′ and 𝑣𝐵
′ to yield the following:
𝑣𝐴′ = 𝑣𝐴 +
𝑗
𝑀𝐴𝑛
𝑣𝐵′ = 𝑣𝐵 −
𝑗
𝑀𝐵𝑛
66 / 83
Finding the Collision Impulse
Now that we’ve got everything in place, we can finally compute the
collision impulse.
67 / 83
−𝜖𝑣𝐴𝐵𝑛 = 𝑣𝐴𝐵′ 𝑛 definition
coefficient of restitution
= (𝑣𝐴′ − 𝑣𝐵
′ )𝑛 definitionrelative velocity
=(𝑣𝐴 +
𝑗
𝑀𝐴𝑛 − 𝑣𝐵 +
𝑗
𝑀𝐵𝑛)𝑛
definitioncollision impulse
=𝑣𝐴𝑛 +
𝑗
𝑀𝐴𝑛𝑛 − 𝑣𝐵𝑛 +
𝑗
𝑀𝐵𝑛𝑛
distribution
=𝑣𝐴𝑛 − 𝑣𝐵𝑛 +
𝑗
𝑀𝐴𝑛𝑛 +
𝑗
𝑀𝐵𝑛𝑛
commutative property
=𝑣𝐴𝐵𝑛 +
𝑗
𝑀𝐴𝑛𝑛 +
𝑗
𝑀𝐵𝑛𝑛
definitionrelative velocity
Finding the Collision Impulse
Now that we’ve got everything in place, we can finally compute the
collision impulse.
68 / 83
𝑣𝐴𝐵𝑛 +𝑗
𝑀𝐴𝑛𝑛 +
𝑗
𝑀𝐵𝑛𝑛
= −𝜖𝑣𝐴𝐵𝑛
𝑗
𝑀𝐴𝑛𝑛 +
𝑗
𝑀𝐵𝑛𝑛
= −𝜖𝑣𝐴𝐵𝑛 − 𝑣𝐴𝐵𝑛
𝑗(1
𝑀𝐴𝑛𝑛 +
1
𝑀𝐵𝑛𝑛) = −𝜖𝑣𝐴𝐵𝑛 − 𝑣𝐴𝐵𝑛 distribution
𝑗 = −𝜖𝑣𝐴𝐵𝑛 − 𝑣𝐴𝐵𝑛1𝑀𝐴
𝑛𝑛 +1𝑀𝐵
𝑛𝑛
Finding the Collision Impulse
Now that we’ve got everything in place, we can finally compute the
collision impulse.
69 / 83
𝑗 = −𝜖𝑣𝐴𝐵𝑛 − 𝑣𝐴𝐵𝑛1𝑀𝐴
𝑛𝑛 +1𝑀𝐵
𝑛𝑛
= −𝑣𝐴𝐵𝑛(1 + ϵ)
1𝑀𝐴
𝑛𝑛 +1𝑀𝐵
𝑛𝑛
distribution
= −𝑣𝐴𝐵𝑛(1 + ϵ)
𝑛𝑛(1𝑀𝐴
+1𝑀𝐵
)
distribution
Finding the Collision Impulse
Now that we’ve got everything in place, we can finally compute the
collision impulse.
70 / 83
𝑗 = −𝜖𝑣𝐴𝐵𝑛 − 𝑣𝐴𝐵𝑛1𝑀𝐴
𝑛𝑛 +1𝑀𝐵
𝑛𝑛
= −𝑣𝐴𝐵𝑛(1 + ϵ)
1𝑀𝐴
𝑛𝑛 +1𝑀𝐵
𝑛𝑛
distribution
= −𝑣𝐴𝐵𝑛(1 + ϵ)
𝑛𝑛(1𝑀𝐴
+1𝑀𝐵
)
distribution
Plugging in j back into our collision impulse equation yields the new velocities of A and B!
Collision Impulse II
Finally, we need to understand how to have the collision impulse j
change the angular momentum:
𝜔𝐴′ = 𝜔𝐴 +
𝐴𝑃⊥𝑗𝑛
𝐼𝐴
𝜔𝐵′ = 𝜔𝐵 −
𝐵𝑃⊥𝑗𝑛
𝐼𝐵
71 / 83
Finding the Collision Impulse
Let’s close by computing the collision impulse with spin:
72 / 12
−𝜖𝑣𝐴𝐵𝑛 = 𝑣𝐴𝐵′ 𝑛 definition
coefficient of restitution
= (𝑣𝐴𝑃′ − 𝑣𝐵𝑃
′ )𝑛 definitionrelative velocity
= (𝑣𝐴′ + 𝜔𝐴
′ 𝐴𝑃⊥ − (𝑣𝐵′ + 𝜔𝐵
′ 𝐵𝑃⊥))𝑛 Chasles’ Theorem
= (𝑣𝐴′ + 𝜔𝐴
′ 𝐴𝑃⊥ − 𝑣𝐵′ − 𝜔𝐵
′ 𝐵𝑃⊥)𝑛
=(𝑣𝐴 +
𝑗
𝑀𝐴𝑛 + (𝜔𝐴 +
𝐴𝑃⊥𝑗𝑛
𝐼𝐴)𝐴𝑃⊥ − (𝑣𝐵 −
𝑗
𝑀𝐵𝑛) − (𝜔𝐵 −
𝐵𝑃⊥𝑗𝑛
𝐼𝐵)𝐵𝑃⊥)𝑛
definitioncollision impulse
=(𝑣𝐴 +
𝑗
𝑀𝐴𝑛 + 𝜔𝐴𝐴𝑃⊥ +
𝐴𝑃⊥2𝑗𝑛
𝐼𝐴− 𝑣𝐵 +
𝑗
𝑀𝐵𝑛 − 𝜔𝐵𝐵𝑃⊥ +
𝐵𝑃⊥2𝑗𝑛
𝐼𝐵)𝑛
=𝑣𝐴𝑛 +
𝑗
𝑀𝐴𝑛𝑛 + 𝜔𝐴𝐴𝑃⊥𝑛 +
𝐴𝑃⊥2𝑗𝑛𝑛
𝐼𝐴− 𝑣𝐵𝑛 +
𝑗
𝑀𝐵𝑛𝑛 − 𝜔𝐵𝐵𝑃⊥𝑛
+𝐵𝑃⊥
2𝑗𝑛𝑛
𝐼𝐵
distribution
Finding the Collision Impulse
Let’s close by computing the collision impulse with spin:
73 / 12
𝑗
𝑀𝐴𝑛𝑛 +
𝐴𝑃⊥2𝑗𝑛𝑛
𝐼𝐴+
𝑗
𝑀𝐵𝑛𝑛 +
𝐵𝑃⊥2𝑗𝑛𝑛
𝐼𝐵
= −𝑣𝐴𝑛 − 𝜔𝐴𝐴𝑃⊥𝑛 + 𝑣𝐵𝑛 + 𝜔𝐵𝐵𝑃⊥𝑛− 𝜖𝑣𝐴𝐵𝑛
j to left side,non-j to right
side
𝑗𝑛𝑛(1
𝑀𝐴+𝐴𝑃⊥
2
𝐼𝐴+
1
𝑀𝐵+𝐵𝑃⊥
2
𝐼𝐵)
= −𝑛(𝑣𝐴 +𝜔𝐴𝐴𝑃⊥ − 𝑣𝐵 −𝜔𝐵𝐵𝑃⊥ + 𝜖𝑣𝐴𝐵) distribution
𝑗𝑛𝑛(1
𝑀𝐴+𝐴𝑃⊥
2
𝐼𝐴+
1
𝑀𝐵+𝐵𝑃⊥
2
𝐼𝐵)
= −𝑛(𝑣𝐴𝑃 − 𝑣𝐵𝑃 + 𝜖𝑣𝐴𝐵) Chasles’ Theorem
𝑗𝑛𝑛(1
𝑀𝐴+𝐴𝑃⊥
2
𝐼𝐴+
1
𝑀𝐵+𝐵𝑃⊥
2
𝐼𝐵)
= −𝑛(𝑣𝐴𝐵 + 𝜖𝑣𝐴𝐵) definitionrelative velocity
𝑗𝑛𝑛(1
𝑀𝐴+𝐴𝑃⊥
2
𝐼𝐴+
1
𝑀𝐵+𝐵𝑃⊥
2
𝐼𝐵)
= −𝑛𝑣𝐴𝐵(1 + 𝜖) distribution
𝑗 = −𝑛𝑣𝐴𝐵(1 + 𝜖)
𝑛𝑛(1𝑀𝐴
+𝐴𝑃⊥
2
𝐼𝐴+
1𝑀𝐵
+𝐵𝑃⊥
2
𝐼𝐵)
Collision Detection
• Now that we know how to handle collisions, all that’s left is to
understand how to detect them
• As detecting intersections between arbitrary polygons is quite
expensive, they are usually wrapped by some kind of collision shape
• With these shapes, typical test like shape-shape intersection and
ray-shape intersection become far cheaper
• The quality of the collision detection depends on how good the
shapes fit the actual body
74 / 83
Collision Spheres
Detecting whether two spheres A and B intersect is as easy as
comparing their distance to the sum of their radii.
75 / 83
Collision Spheres
The potential collision point lies on the ray from sphere A to B at the
exact radius of A.
76 / 83
Collision Spheres
Detecting whether a ray intersects a sphere requires some tedious, but
basic math (see References)
77 / 83
Axis-Aligned Bounding Boxes
Detecting whether two axis-aligned bounding boxes 𝐴𝑚𝑖𝑛, 𝐴𝑚𝑎𝑥 and
(𝐵𝑚𝑖𝑛, 𝐵𝑚𝑎𝑥) intersect can be easily checked using the separating axis
theorem:
78 / 83
Axis-Aligned Bounding Boxes
Detecting whether two axis-aligned bounding boxes 𝐴𝑚𝑖𝑛, 𝐴𝑚𝑎𝑥 and
(𝐵𝑚𝑖𝑛, 𝐵𝑚𝑎𝑥) intersect can be easily checked using the separating axis
theorem:
𝐴𝑚𝑖𝑛𝑥 > 𝐵𝑚𝑎𝑥𝑥 or 𝐵𝑚𝑖𝑛𝑥 > 𝐴𝑚𝑎𝑥𝑥 or
𝐴𝑚𝑖𝑛𝑦 > 𝐵𝑚𝑎𝑥𝑦 or 𝐵𝑚𝑖𝑛𝑦 > 𝐴𝑚𝑎𝑥𝑦 or
𝐴𝑚𝑖𝑛𝑧> 𝐵𝑚𝑎𝑥𝑧
or 𝐵𝑚𝑖𝑛𝑧> 𝐴𝑚𝑎𝑥𝑧
79 / 83
Tunneling
• If your objects move too fast, you run in danger of missing collisions
due to your numerical integration step size.
• Imagine a sphere moving fast towards a thin wall.
80 / 83
Tunneling – Possible Solutions
• Make the wall thicker.
Need to instruct all level designers.
• Impose an upper bound on object speed.
• Find the speculative contact through the bounding box of the
previous position of the moving object and the current one, and sub-
step from the contact point
Arbitrary convex polygons are a challenge (see Continuous
Collision by Erin Catto in References)
81 / 83
Octrees
• Checking every pair of objects can be very expensive
• The number of required checks can be reduced by subdividing the
space into smaller parts, and checking only pairs of objects who are
found within the same part
82 / 83Image by Bill Jacobs
Octree Construction
• Start with an empty root node covering the entire world
• Whenever you add an object to the world, start at the root node and
traverse the tree, finding the node farthest from the root that fully
contains the object
• If the node has reached its maximum capacity now, subdivide it into
children
83 / 83
Collision Detection using Octrees
• Given an octree containing shapes, we only need to check all pairs
of shapes that are found within the same node
• Shaped in non-leaf nodes need to be checked against all shapes of
all child nodes, and their children
84 / 83
Optimizing Octrees
• If the average object size begins to exceed the node size, objects
will start to be put in parent nodes more often.
• Limiting the depth of the octree helps avoiding this issue.
• For the same reason, it might be necessary to merge nodes again if
objects have moved away.
85 / 83
Future Work
• 3D (Matrices & Quaternions)
• Joints
• Non-rigid bodies
• Detecting Arbitrary Collisions
86 / 83
References
• Fiedler. Game Physics – Integration Basics. http://gafferongames.com/game-physics/integration-basics/, 2006.
• Fielder. Game Physics – Fix Your Timestep! http://gafferongames.com/game-physics/fix-your-timestep/, 2006.
• Hecker. Physics, The Next Frontier. Game Developer Magazine, October/November 1996.
• Hecker. Physics, Part 2: Angular Effects. Game Developer Magazine, December 1996/January 1997.
• Hecker. Physics, Part 3: Collision Response. Game Developer Magazine, March 1997.
• Catto. Box2D User Manual. http://box2d.org/manual.pdf, 2007.
• Catto. Physics for Game Programmers – Continuous Collision. http://www.gdcvault.com/play/1018239/Physics-for-Game-Programmers-Continuous, 2013.
• Baraff. Physically Based Modelling – Rigid Body Simulation. http://www.pixar.com/companyinfo/research/pbm2001/pdf/notesg.pdf, 2001.
• Jacobs. OpenGL Tutorial – Collision Detection. http://www.videotutorialsrock.com/opengl_tutorial/collision_detection/text.php, 2014.
• Su. Ray-Sphere Intersection. http://www.cs.tufts.edu/~sarasu/courses/comp175-2009fa/pdf/comp175-15-ray-sphere.pdf, November 11, 2009.
87 / 83
10 Minute Review Session
• What’s the difference between kinematics and dynamics?
• What is velocity?
• What is acceleration?
• What is momentum?
• What is force?
• In your own words: How does Explicit Euler Integration work?
• Why are fixed time steps important in physics simulation?
• What is a rigid body?
10 Minute Review Session
• What is the center of mass?
• In your own words: Explain Chasles’ Theorem!
• What is torque?
• What is moment of inertia?
• What is an impulse?
• Which data is required for resolving collisions?
• Which collision shapes do you know?
• How can you prevent tunneling?
• How can you reduce the number of collisions to check for?