Embed Size (px)
DESCRIPTION
Keynote for short presentation,
Citation preview
GettingStartedwith HardwareFactory&StoreShingo Hisakawa@hisashin
What I Fab&Sell
Smallest,Cheapest and OpenedAndroid Development Kit “Harpy”
NO SKILLWeb&Android Programmer
NO TIMEWeekend Maker
NO MUCH MONEYNo Expensive Tool nor Outsource
What I Fab&Sell
Smallest,Cheapest and OpenedAndroid Development Kit “Harpy”
NO SKILLWeb&Android Programmer
NO TIMEWeekend Maker
NO MUCH MONEYNo Expensive Tool nor Outsource
What I Fab&Sell
Smallest,Cheapest and OpenedAndroid Development Kit “Harpy”
NO SKILLWeb&Android Programmer
NO TIMEWeekend Maker
NO MUCH MONEYNo Expensive Tool nor Outsource
What I Fab&Sell
Smallest,Cheapest and OpenedAndroid Development Kit “Harpy”
NO SKILLWeb&Android Programmer
NO TIMEWeekend Maker
NO MUCH MONEYNo Expensive Tool nor Outsource
HowTo1. Read Open SchematicsGoogle Prototype (¥31500 / $400)
2. Change As You WantHarpy (¥2880 / $35)
3. Layout and Order PCB by EmailFusion PCB (¥80 / $1)
4. Buy Parts at Akihabara or WebDigikey
5. Laminate Solder Stencil50μmStep Cutting Tool(¥27000 / $340)100μm Laminate Film (¥3 / ¢4)EAGLE Data
DXF DataSolder Stencil
6. SolderingJapanese Pizza Oven (¥2000 / $25)
orCheapest Pro Oven (¥20000 / $250)
Paste Solder Cream
Place PartsDone!
Now,You can prototype without risk.
But Imagine to place40 SUPER SMALL PARTS
on each 100 boards to sell.
FPGA-CAFE at Tsukuba OpenSource: FREE (FabLab) Closed: Cheaper than Outsource
7. Self Gas Station : Laser Cutter
8. Self Gas Station: Tip Mounter & OvenFPGA-CAFE at Tsukuba OpenSource: FREE (FabLab) Closed: Cheaper than Outsource
9. Sell on the WebJimdo Pro(¥11340 / $150)
10. Pack & ShipFew minutes is enough on weekday
http://www.harpyhack.com
Let me share and Start Together
