Upload
ca-nimsoft
View
3.014
Download
5
Embed Size (px)
DESCRIPTION
This presentation covers best practices for monitoring Cisco UCS and demonstrate Nimsoft Monitor, which provides:- A comprehensive view into the status and operation of physical elements, including fans and fan modules, power supply units, fabric interconnects, IO modules, and basic environmental monitoring of blade interfaces, processors,and memory arrays- Real-time views of the virtual environment ESX host and VM guest availability—views that automatically associate hosts with guest instances- Pre-configured alarm and alert settings, quality of service settings, and dashboards.For more information, visit www.nimsoft.com.
Citation preview
Page 1© Nimsoft, all rights reserved
Hints and Tips –Monitoring Cisco UCS
Lax Sakalkale
Product ManagementVirtualization, Clouds Monitoring
Steve SmithProduct MarketingVirtualization, Clouds Monitoring
Chakri AvalaCisco UCS Product ManagerManagement Software Solutions
Page 2© Nimsoft, all rights reserved
Today
› Nimsoft Unified Management
› Cisco UCS and Clouds
› Cisco UCS Discovery and Monitoring
› Associating Cisco UCS with supported environments and services
› Setting thresholds and metrics
› Automatic configuration of Cisco UCS monitoring
› Demo
› Q&A
Page 3© Nimsoft, all rights reserved
Nimsoft - Unified IT Management
› Until now, IT solutions existed in silos» Separate solutions for each IT discipline» High cost & complexity» Difficult integrations, manual processes
› Nimsoft customers at the forefront:» Service Providers – seeing high growth» Emerging Enterprises
› Requirement – Unified IT Management» Single solution, infrastructure, view» Modular architecture
Rapid adoption of cloud, virtualization and external IT service providers drive new IT management requirements
Page 4© Nimsoft, all rights reserved
Cisco Unified Computing System
› A Platform for Tomorrow’s Data Center. And Today’s.» Run any application: virtualized
or non-virtualized» Integrate with existing networks,
storage, and management infrastructure
» Run side by side with legacy infrastructure
» Self integrating: Deploy rapidly & increase productivity
Page 5© Nimsoft, all rights reserved
Cisco UCS – Modular and Powerful
Page 6© Nimsoft, all rights reserved
4.Unified Infrastructure Systems (VBlock, FlexPod, ...) enable scalable systems acquisition, deployment and operations
2. Unified Network Servicesprovides dynamic multi-tenant network service provisioning and operations 3. Unified Computing
Systemensures scalable on-demand resource addition and graceful deletion
5. Unified Service Delivery assures consistent portability and interoperability.
1. Unified Fabric enables wire-once and eliminates I/O overheads
Cisco Cloud Building Blocks
Page 7© Nimsoft, all rights reserved
Nimsoft Cisco UCS Monitoring› Dense compute power
› Self-service orientation
› Shared infrastructure
› Elasticity
› Support for mission critical applications and services
Required –A unified approach
› Support for all Cisco UCS components
› Agentless data collection(from Cisco UCS Manager)
› Auto-discovery of all Cisco UCS components and its details
› Auto-configuration
› Auto-monitoring
› Detailed events, alerts and performance
Page 8© Nimsoft, all rights reserved
Discovery – For Dynamic Cisco UCS Environments
Three key capabilities:
› Network » Network and Topology
› Configuration» Internal components / configuration
› Context» Converged Infrastructure stacks – FlexPod, Vblock
Page 9© Nimsoft, all rights reserved
Associating Cisco UCS with Environments and Services
› Converged Infrastructure
› Cloud and Virtualization
› Applications and services» Email» Web Apps» …
Page 10© Nimsoft, all rights reserved
Cisco UCS Converged InfrastructureVblock / FlexPod
A turnkey monitoring solution for UCS-based Cloud stacks
› Flexible, scalable monitoring
› Discovers and monitors all physical and virtual components inside and outside of Vblock or FlexPod
› Event correlation and analysis
› Customizable, roll-based dashboards
› Service level and usage optimization reporting
› True multi-tenant SaaS delivery
› Usage-based metering and billing
› OOB Unified Dashboards
FlexPod
Cisco/VMware/EMC
Cisco/VMware/NetApp
Page 11© Nimsoft, all rights reserved
Page 12© Nimsoft, all rights reserved
Page 13© Nimsoft, all rights reserved
› Set thresholds appropriate to usage» Baseline current usage
- Check typical growth rates- Set threshold times and exceptions
› Best practice thresholds» Use the “Top Ten” / “Bottom Ten”» Alarms for growth rates –
Not just thresholds- Physical CPU/Memory/Disk/Network use- Alarm on Rate, not just threshold
» Use % measures as standard- Will still reflect meaningful data even if resized
» Set alarms for minimum available %- Long enough time to correct the problem when usage grows
disproportionately» Physical performance and capacity
- By platform component Physical CPU, I/O (read/write performance), network, memory
Setting Appropriate Thresholds
Page 14© Nimsoft, all rights reserved
Automatic Application of Cisco UCS Monitoring
› Auto-configuration» Auto-apply to existing elements
› Auto-monitoring» Auto-apply to new elements
› Nimsoft Templates» Policies for monitoring» Transportable to other instances,
or applicable within auto-configsor auto-monitors
› Key metrics» Nimsoft includes best practices in
the Templates» Templates are included with probes
Page 15© Nimsoft, all rights reserved
Cisco UCS Related List Views
Automatically display the status of new elements» Virtualization Environment» Chassis» Chassis fan module» Chassis fans» Power supply units» IO modules» Blade servers» Blade server adaptor units» Blade server memory arrays» Blade server processors» Blade server interface cards» Fabric interconnect fans» Fabric interconnect power supplies» Fabric interconnect IO modules and
vethernet ports» Fabric interconnect IO module fibre
channel ports» Fabric interconnect local storage and
dynamic counters» Fabric interconnect
Page 16© Nimsoft, all rights reserved
Demo
Auto Discovery of UCS EnvironmentsDelivering UCS Monitoring
Page 17© Nimsoft, all rights reserved
Free Trial – With Automated UCS Monitoring Wizard…
Cisco UCS/Vblock Wizard Utility for SaaS
» Installs SaaS relay with UCS / Vblock probes
» Auto-configured /deployed within 15 minutes
» Automatic population of monitoring data into pre-built UMP dashboards
Page 18© Nimsoft, all rights reserved
Nimsoft Monitor for Cisco UCS Environments
› Nimsoft - Complete single tool » Single infrastructure and portal» Coverage for Cisco UCS,
virtual environment, networks,applications, services and more
» Automatically detect configuration and apply monitoring
» Events, alarms, performance» Service Desk and Monitor
› Effectively, efficiently, maintain Service Levels» Rapidly identify & correct outages» Proactively prevent problems
Page 19© Nimsoft, all rights reserved
Thank You
Q&A
More information at http://www.nimsoft.com/solutions/nimsoft-monitor/server/cisco-ucs
Call your Nimsoft representative at: +1 408 796 3400