SRAM alsoknown as Cache is used to store the most used
data.
It provides faster access to data than retrieving it from the
slower DRAM,
The three main types of cache memory are L1, L2 and L3.
L1 is cache memory integrated into the CPU. L2 is cache memory
which is also integrated into the CPU. L3 is cache memory is used
on only some high end workstations.
7.
Dynamic Temporary Storage often refers to computer components
and recording media that retains data.
Dynamic Temporary Storage is the core function of computers in
memory.
There are many different types of memory like:
SDRAM
GB PATA
SDLT
8.
EEPROM (Electrically Erasable Programmable Read-Only Memory) is
a type of memory that can retain the stored information even when
not powered on.
EEPROM has helped make Flash Memory for the computer which
basically does the same job to EEPROM.
The data must be saved before the computer is powered off.
9.
Flash Memory is also memory that can retain stored data even
when the computer is not powered on, which can be electrically
erased and reprogrammed.
It was developed by EEPROM (Electrically Erasable Programmable
Read-Only Memory).
The data must be erased in quite big blocks before they can be
rewritten with new data.
USB Memory Sticks and Memory Cards are types of Flash
Memory.
10.
Adapter Cards are used to give a lot more capability of the
computer by expanding and customizing it.
There are lots of different kinds of Adapter Cards. There are
Adapter Cards like Network Interface Cards (NIC), Wireless NIC,
Sound Adapter, Video Adapter, Capture Card, TV Tuner, Modem
Adapter, SCSI Adapter and RAID Adapter.
11.
Expansion Slots lets you plug in Adapter Cards on the
Motherboard. The type of Adapter Card must match with the expansion
slot.
There are lots of different kinds of Expansion Slots like PCI,
AGP, PCle, ISA, EISA and MCA.
12.
Storage Drives read or write information to optical storage
media. It can store permanent data or to retrieve information from
a media disk.
SATA refers to the serial versions of the ATA drive controller.
It uses a 7-pin data connector.
PATA refers to the parallel version of the ATA drive controller
interface.
SCSI can connect both internal and external drives. It uses
50-pin, 68-pin and 80-pin connectors.
Partitioning and Formatting is when you set up a new, empty
hard disk so that you can put it into an Operating System.
13.
An Input Device is used to put data into a computer by plugging
it into the computer.
Input Devices are devices like:
Mouse
Keyboard
Camera
Biometric Authentication Device
Touch Screen
Scanner
14.
An Output Device is used to take information from a computer by
using special equipment.
Output Devices are devices like:
Monitors
Projectors
Printers
Scanners
Fax Machines
Speakers
Headphones
15. 16.
Hey.
This is my presentation for you guys who are new to using
computers. Am I right.
I will tell you about those small components in a computer.
These are called Internal Components.
I will not tell you about each one in detail but I will cut it
down to the main parts of information.
17.
The CPUstands for Central Processing Unit. It controls
everything on the computer.
RISC (Reduced Instruction Set Computer) and CISC (Complex
Instruction Set Computer) are the two types of CPU.
Overclocking is used to make a processor work at a faster speed
than its original specification.
MMX is a set of multimedia instructions built into Intel
processors.
CPU size is measured in Bytes . CPU speed is measured in GHz.
Cool or what.
18. 19. 20.
SRAM is known as Cache
It is used to store the most used data.
It provides fast access to data.
The re are three main types of cache memory. L1, L2 and
L3.
21.
Dynamic Temporary Storage is the core function of computers in
memory.
There are many different types of memory like:
SDRAM
GB PATA
SDLT
22.
EEPROMstands for Electrically Erasable Programmable Read-Only
Memory).
It is a type of memory that can delete the stored information
even when not powered on.
The data must be saved before the computer is powered off.
23.
Flash Memory is memory that can delete stored data even when
the computer is not powered on.
It was developed by EEPROM
USB Memory Sticks and Memory Cards are types of Flash
Memory.
24.
Adapter Cards give a lots of capability to the computer by
making it bigger and customizing it.
There are lots of different kinds of Adapter Cards. Network
Interface Cards (NIC), Wireless NIC, Sound Adapter, Video Adapter,
Capture Card, TV Tuner, Modem Adapter, SCSI Adapter and RAID
Adapter.
25.
Expansion Slots lets you plug in Adapter Cards on the
Motherboard.
The type of Adapter Card must match with the expansion
slot.
There are lots of different kinds of Expansion Slots . PCI,
AGP, PCle, ISA, EISA and MCA.
26.
Storage Drives read or write information to optical storage
media.
SATA refers to the serial versions of the ATA drive
controller.
PATA refers to the parallel version of the ATA drive controller
interface.
SCSI can connect both internal and external drives.
Partitioning and Formatting is when you set up a new, empty
hard disk so that you can put it into an Operating System.
27.
An Input Device is used to put data into a computer by plugging
it into the computer.
Input Devices are devices like:
Mouse
Keyboard
Camera
Biometric Authentication Device
Touch Screen
Scanner
28.
An Output Device is used to take information from a computer by
using special equipment.