14
Property of Advanced Inspection Technologies Inc. “Everything you need, nothing you don’t…”

iTool Videoscope

Embed Size (px)

Citation preview

Property of Advanced Inspection Technologies Inc.

“Everything you need, nothing you don’t…”

Property of Advanced Inspection Technologies Inc.

INSERTION TUBECAMERAANDLENS TIP

SHIPPING&OPERATINGCASE

LIGHT SOURCE

System Components:Video-image Hub

VIDEOPROBE HAND-PIECE

ARTICULATION SECTION

Property of Advanced Inspection Technologies Inc.

Product Designation

Probe Diameter (4.0, 6.0 & 8.0 mm)

Probe Length (x100cm)*

Articulation (2 or 4-way)

• SYS = Full system in case ( Includes Videoscope, Imaging Hub/Light Source and System Case

•[Blank] VideoProbe only in case

*(100, 150, 200, 300, 500, 600, 750)

DesignationComplete System or Probe Only

i 4 - 6 - 300 - SYSProduct Identification:

Property of Advanced Inspection Technologies Inc.

20 SECOND SET-UP:

Step 1 - Open Case Top

Step 2 - Plug in power cord

Step 3 - Turn on power switch

Step 4 - Remove hand-piece and insertion tube from case

Step 5 - Start Inspecting!

Case HandleWheels

Rugged Case

Handlebar

Latches

Property of Advanced Inspection Technologies Inc.

Articulation Controls

One-Touch Image Capture Button

Strain relief

Armored Power & Light Guide Umbilical

Rugged Aluminum Hand-Piece

Property of Advanced Inspection Technologies Inc.

4.0mm

Insertion Tubes – 4.0mm, 6.0mm, 8.0mm Diameters

Working Lengths – 1.5 Meters to 50.0 Meters

Construction – Tungsten Multi-Layer braid

Insertion Tube Immersible in: Water, Mineral and Synthetic Oils, Hydraulic

Fluids, Aviation Fuel, Kerosene, Gasoline and Diesel Fuel

Property of Advanced Inspection Technologies Inc.

Interchangeable Tip Adapters – 0° Direct and 90° Side View

Sony Super HAD CCD – 380,000 Pixel Imager Produces Brilliant High Resolution

Images

4.0mm

Articulation Control

Property of Advanced Inspection Technologies Inc.

•Intuitive one-handed operation• Pressing Control “A” ALWAYS moves

view on screen up or down.• Pressing Control “B” ALWAYS moves

view on screen right to left.

Tungsten Braided Insertion Tube300 lb. Per Square Inch4.0mm(0.15”) Diameter6.0mm (0.240”) Diameter8.0mm (0.315”) Diameter

Interchangeable Tip

4-Way Articulation

*Minimum Bending Angle Note:150 Degrees - 3M or Less120 Degrees – 5.0M to 6.0M90 Degrees - 7.5M

Property of Advanced Inspection Technologies Inc.

32GB SD Card

ACMI Light Plug

Splash Proof Key Board

7” LCD Monitor

24 W HID Light Source

Light Brightness Control

5 Pin Connector

Front of Imaging-Hub

Property of Advanced Inspection Technologies Inc.

USB Interface

12 DC Volt Power Input

AC power

Audio Input and Output

Video Input and Output

Cooling Fan

On/Off Switches

Rear of Imaging-Hub

Property of Advanced Inspection Technologies Inc.

• Only 5.5 Pounds !

• Brilliant 7 inch, high resolution LCD !

• Freeze frame button

• Capture Digital Images

• Record Video

• Image inversion and 180° Rotate button

• brightness control

• Full Screen Image review

• Built in Key Board

• Menu Button

• Long exposure

iTool Technology Platform:

Property of Advanced Inspection Technologies Inc.

Extendible Handle Bar

Security Latches

Wheels

Waterproof Industrial System Case

Property of Advanced Inspection Technologies Inc.

• Brilliant High Resolution Images

• Portable• Simple to use• Rugged Construction• Features you need

• Digital Image Capture• Text Overlay• Long Exposure

• Powerful 24 W HID Light Source• Affordable

iTool System Technology Platform:

Contact US:

Property of Advanced Inspection Technologies Inc.

Technical Support

Tele: 321-610-8977Fax: (321) 574-3814E-Mail: [email protected]

iTool Product ManagerPaul Fitzgerald

Tele: 321-610-8977Fax: (321) 574-3814

E-Mail: [email protected]

Advanced Inspection Technologies Inc.7351 Office Park Park PlaceSuite 146Melbourne, FL 32940Phone: 321-610-8977Fax: (321) 574-3814Website: www.aitproducts.com