View
838
Download
3
Tags:
Embed Size (px)
Citation preview
Universal milling machine LM1450C
OVERVIEW | DESCRIPTIONS | SPECIFICATION | CONTACT US
Machine tool has the advantages of universal, high rigidity,broad use and easy to operation, is especially suitable for small batch production and equipment, tool and maintenance workshop. Installing universal dividing head, Rotary table or and other special accessories ,can expanded machine tools process performance, can process vertical or horizontal, straight or spiral shaped of Groove, cylindrical shaped surface, straight gear or spiral gear , if equipped with drill boring accessories and tools, can use for drilling, spread hole ,scraping end surface ,slot and so on.
Plug
Rotary table
Digital control panel
Dividing head
Clamping kit
Boring device
milling-boring machine
Install workpiece
Special parts machiningSlot keyway
shaped workpiece processing
safe and reliable
Tengzhou Sanzhong M
achinery Manufacture C
o.,Ltd
Email:[email protected]:+86-632-5698858
OVERVIEW | DESCRIPTIONS | SPECIFICATION | CONTACT US
LM1450C Universal milling machine overview
Left View Front view Right view
Universal rotary head milling machine is a series of Knee type milling machine ,have distinctive features.It have general features of horizontal milling machine and also increased ram type main gearbox.For the head ,it used vertical horizontal dual-use universal milling head. It can adjust spindle to arbitrary angle, and process work parts reaching general face milling machine hard to reach.Its can precison process on both vertical and horizontal at the same time.Two main spindle with independent electric control, is flexible and easy to use.
Tengzhou Sanzhong M
achinery Manufacture C
o.,Ltd
Email:[email protected]:+86-632-5698858
OVERVIEW | DESCRIPTIONS | SPECIFICATION | CONTACT US
Table size mm 1600X320
Numbers、width&distance between T - slot mm 3X18X70
Max.longitudinal travel mm 800
Max.cross travel mm 320
Max.vertical travel mm 350-400 The foundation needs
Travel of arm mm 730
Swivel angle of the vertical milling head degree ±360°
Max.rotary angle of table degree ±45°
Distance from vertical spindle to column surface (Min) mm 270
Distance from horizontal spindle to ram bottom mm 200
Level spindle taper taper 7:24 NO50
Milling head spindle taper taper 7:24 NO50
level spindle speed grade steps 18
level spindle speed range rpm 30-1500(50HZ)
Milling Head spindle speed garde steps 12
milling head spindle speed range rpm 51-1483(50HZ)
Grade of the work-table feeds steps 18
Range of feed speeds longitudinal,cross,vertical mm/min 23.5-1180 8-394
Speed of rapid travels longitudinal,cross,vertical mm/min 2300 770
Milling head spindle drive motor kw 4
level spindle drive motor kw 7.5
Feed motor kw 1.5
Coolant pump w 125
Net weight /Gross weight kg 3500/3700
Tengzhou Sanzhong M
achinery Manufacture C
o.,Ltd
Email:[email protected]:+86-632-5698858
OVERVIEW | DESCRIPTIONS | SPECIFICATION | CONTACT US
LM1450C Universal milling machine overview
Milling head swivel 360 degree
Change feeding speed Vertical milling back and forth motion Change horizontal speed
Tengzhou Sanzhong M
achinery Manufacture C
o.,Ltd
Email:[email protected]:+86-632-5698858
OVERVIEW | DESCRIPTIONS | SPECIFICATION | CONTACT US
LM1450C Machine Commissioning
01 03 05
02 04
Make the machine powered
Check Phase
read the operation manual
clean and lubricate the machine
Low-speed manual operation
Tengzhou Sanzhong M
achinery Manufacture C
o.,Ltd
Email:[email protected]:+86-632-5698858
OVERVIEW | DESCRIPTIONS | SPECIFICATION | CONTACT US
Comparing with the same types of milling machine
235 Max.cross travel(mm) 320
7:24 NO:40,Morse NO:3# Milling head spindle taper(taper) 7:24 NO50
680(780) Max.longitudinal travel(mm) 800
4 Main drive motor level spindle(kw) 7.5
0.75 Feed motor(kw) 1.5
2.2 Main drive motor milling head spindle(kw) 4
LM1450CX6230A
VS
Tengzhou Sanzhong M
achinery Manufacture C
o.,Ltd
Email:[email protected]:+86-632-5698858