~Drill hole & Sanding edge of Pig’s face and back/ Sanding dowels~ Wednesday 27/04/11

Today I finished drill hole. I had to drill

hole like this picture. I used G clamps to

hold tow bases together. Emotion-

before drill hole, I felt ‘it’s very easy’, but

actually the G clamps are kind of heavy and I

had to hold G clamps. So it was little bit

difficult. When I finished drill hole, I get tired,

because of G clamps. I had to hold G clamps stronger. Then it

wouldn’t move and I wouldn’t drill hole different position. First time,

I didn’t hold G clamps strong so the drill pit

touch with pig’s face and back, it moves

and I shaved little bit to different position.

Anyway I finished drill hole. Next, I sand

edge of Pig’s face and back. First time, I was

using sanding block and sand paper to sand

edge of pig’s face and back. But Ana and Diane

said ‘file is more easy to sand edge of

Pig’s face and back.’ So I changed to file

and sand it. It was easy and fast, but it

would be

anding edge of pig’s face and back

Using file to sanding

S

rough. After sanding Pig’s face and back, I sand Dowel’s middle. I

haven’t finished it all. So NEXT class will be sand others dowel, and I

will make rounds for inside of dowels. The spheres will be like this.

The spheres size will bigger then width between one dowel and one

dowel.

AOI-Approaches to learning (ATL)

Today my friend approached me to

learning different usage of tools. Like file

and sand paper. Those tools are for sanding, but

file is more easy and fast for sand edge of Pig’s

face and back.

Sanidng middle of dowels