Siemens PLM Software: LMS SCADAS XS

Restricted © Siemens AG 2014 All rights reserved. Smarter decisions, better products.

LMS SCADAS XSExtra Small. Extra Smart.

Product Presentation – Dirk De Weer, LMS Belgium

Restricted © Siemens AG 2014 All rights reserved.

Page 3 Siemens PLM Software

Power in your pocketportable data acquisition using LMS SCADAS XS

Office/Lab PortableMobile

?LMS SCADAS XS



Demo



Key values of LMS SCADAS XS

QUALITYPRODUCTIVITY

Make best use of test time

Fit for N&V use cases

Fit for ‘rough rides’

Use in standalone or with PC

Validate data on the go

Be certain of your data

Preconfigured lab setup

OK/Reject decisions while testing

Secure data storage

State-of-the-art signal conditioning

EXISTING NEW - PORTABILITY

take it wherever you need

Full day autonomy

Highest channel density

Carry on person

Pocket-size

Setup without PC

View time and processed signals on tablet

Replay in full standalone

Most compact N&V system on the market

Hand over to non-expert



Content



LMS SCADAS XSKey Hardware Characteristics

Compact, hand-held size

(H 170 mm x W 114 mm x D 23 mm)

USB, WLAN and (future) LAN

12 V/ICP/TEDS channels with robust and compact LEMO connectors

Headset interface - Digital Head interface - 2 analogue tacho - CAN Bus and GPS

Internal battery autonomy +6 hours

On-board storage capacity based on SD card

“Personal” version and (future) “Network” version



LMS SCADAS XSHow many channels?

4 tri-axial accelerometers(1 connector)

12 inputsICP microphones or

accelerometers

6 or 12 channels AC/DC/ICP TEDS

6/12 input

channels

LMS SCADAS XS is a “12 plus” channel

system

Dual analog tachoRpm & speed

LMS 3D BinauralHeadset

Digital head

GPSCAN & OBD2Rpm, speed, calculated load, coolant temp, air intake temp, ignition, throttle pos.

Extra channels

DAC outStereo replay

+2 +2+2

http://www.pcb.com/contentstore/images/PCB_Corporate/Vibration/Products/Photo/400/355B03.jpg














LMS 3D Binaural Headset

listen to your data

• Recording specifications

• 27 dB(A) – 130 dB

• 20-20kHz

• TEDS

• Adapter for field calibration

• Factory alignment Left & Right sensitivity

• ICP compatible

• Diffuse Field Equalization filters provided

• Replay :

• “Sennheiser quality”

• Single connector to LMS SCADAS XS for recording

& replay

Binaural recordings

Immediate validation by listening

Easy & cost effective



LMS SCADAS XSHow to use – 3 possible scenarios

Using Tablet

Recorder mode



LMS SCADAS XSOverall Factsheet

Frontend mode Power & data via USB Data storage on computer LMS Test.Lab Signature (14A)

Recorder mode Setup with Test.Lab or Tablet Stand alone recording mode (start/stop) Data storage on LMS SCADAS XS SD card

Tablet mode Using WLAN Setup, monitoring, control and validation using tablet Save Data storage on LMS SCADAS XS SD card (Release 14A)

Autonomy: +6 hours (for typical use) Storage capacity: Micro SD 32GB (4byte/sample) Environmental:

Temperature: from -10º C (14 F) up to 50ºC (122 F)battery charging limited up to 40°C (104°F)

Vibration: MIL-STD-810F method 514.5: 14g Shock: MIL-STD-810F method 516.5: 50g Drop test: MIL-STD-810F method 516.5 procedure

IV (1.2 m drop on each side and corner)

6 or 12 channels ICP/V AC/DC TEDS for microphones, AC accelerometers, low power DC accelerometers PCB, …

LMS 3D Binaural Headset Record & signal replay

(mono or stereo, any analog or SPDIF channel) Equalization of Headset signals

Digital binaural head Digital audio input (SPDIF) HMS settings read-out

Dual Tacho e.g. rpm & speed Analogue Tacho (pulse to rpm conversion) Support of pulse signals up to 20 kHz

CAN & OBD2 ( rpm, speed,..) GPS

Time, location, speed 4Hz update rate

Sample rates : 51.2, 44.1, 48, kHz With 2 and 2.5 decimation



Tablet ApplicationKey Application Characteristics

• Google Nexus Android 7” tablet

• Wireless connection to LMS SCADAS XS (Wi-Fi)

• Automatic ‘scope’ mode

• Select or create configuration (“setup from scratch”)

• Easy data validation through multiple display types

• Audio replay

• Data validation (FFT, Octaves, Orders …)



Content



Soft bag

USB car charger

Tablet fixing device Input cables LEMO 9 pin to 3 BNC

Battery pack

LMS 3D Binaural Headset

CAN, GPS, SPDIF, tacho cable

Tablet, tablet app, charger USB cable

LMS SCADAS XS, charger, USB cable, SD card & reader

What’s in the bag?

included

optional



LMS SCADAS XS versions

6 analog input channels for V/ICP incl. TEDS

Headset for binaural recording and stereo audio replay

SPDIF for HMS digital artificial head

Dual tacho for up to 20 kHz analog pulse signals

Active GPS antenna

CAN bus and OBD2

USB and Wi-Fi interface (can be disabled)

12 analog input channels for V/ICP incl. TEDS

Headset for binaural recording and stereo audio replay

SPDIF for HMS digital artificial head

Dual tacho for up to 20 kHz analog pulse signals

Active GPS antenna

CAN bus and OBD2

USB and Wi-Fi interface (can be disabled)

SC-XS06-E6 ch. entry version

SC-XS12-A12 ch. advanced version



Content



LMS SCADAS XS Application Range

Automotive & Suppliers

Aerospace & Defense

Mechanical Industry

In all these industries, LMS SCADAS XS can be used as a standard frontend connected to a PC. Typical Noise and Vibration applications can be covered (support in Test.Lab Signature Testing) with LMS SCADAS XS.

EXISTING

NEW

In many cases, mobile or field tests are executed by non-expert users or in conditions where PC’s are not suitable. In addition there is continuous pressure to reduce the number of persons needed for mobile test scenarios. For these use cases LMS SCADAS XS provides a new solution for on-the-go diagnostics and troubleshooting.



Auto - MOBILE NVH recording

Where?• Proving grounds• NVH teams who need to do besides lab based measurements

also mobile measurements

Use cases:• Target setting & validation template based• NVH Troubleshooting using Smart scope validate data, look at

basic functions, …

Strengths:• Mobile, compact, rugged, battery operated• 12 + channels ultra high amount of channels, including typical

inputs for automotive customers, such as GPS, CAN, 2X tacho, binaural head…

• Flexibility of 3 modes of operation (can still be used with Test.Lab connected)

• Smart scope on tablet instead of display on HW. Hardware can be ANYWHERE, even in trunk, while tablet is at driver…



Auto - Fast NVH troubleshooting for each engineer

Where?• All NVH teams who need a personal system which fits in

your pocket

Use case:• Fast troubleshooting does not require a channel count

system, but big advantage to have it available at any time why not have one system for each NVH engineer?

Strengths:• System fitting in your pocket or laptop bag• Price competitive system• All types of channels and signal conditioning are available

to start troubleshooting• Tablet operated



Auto - Quality validation

Where?• Quality test at production plant• Quality department

Use cases:• Quality validation of samples (e.g. 1 out of 1000

produced vehicles)• Test runs according to FIXED procedure/template

Strengths:• Compact system, battery operated• Template based recording, measurements can be

performed by anybody (without PC)• Fast validation using Smart Scope or (automated)

processing within Test.Lab, e.g. comparison against reference curves



Aero – in-flight cabin noise and vibration recording

Where?• Civil aircraft OEMs – passenger A/C and business jets• Rotorcraft OEMs• Cabin trim suppliers / Damping material suppliers

Use cases:• In-flight, interactive N&V troubleshooting (pumps, accessory

noise,…)• Vibration and acoustic recording• Acoustic comfort assessment

Strengths:• Compact system, battery operated• Certified for in-flight usage• Carry-on size• Full stand-alone, template based recording (without PC)



Driving defense – noise and vibration recording

Where?• Driving defense OEMs• Acceptance test centers for Army• Military packaging / damping material suppliers

Use cases:• In-field N&V troubleshooting• Environmental data collection for mission synthesis• Crew acoustic (dis-) comfort assessment

Strengths:• Compact system, battery operated• Environmental specs far superior to competition• Carry-on size – easy for field testing• Full stand-alone, template based recording (without PC)



Marine defense – noise and vibration recording

Where?• Defense shipbuilding OEMs, surface and submarines• Acceptance test centers for Navy• Damping material suppliers

Use cases:• In-situ N&V troubleshooting – stealth design support• Surface ship and submarine vibration assessment• Crew acoustic (dis-) comfort assessment

Strengths:• Compact system, battery operated• Environmental specs far superior to competition• Carry-on size – easy for field testing• Full stand-alone, template based recording (without PC)



Mechanical machinery

Where ?- Mechanical machinery (production machines etc.)

Use Case- Operator notices high vibrations at a production machine in Brazil and calls the technical center in

Europe- Engineer in Europe prepares an LMS SCADAS XS with an appropriate setup and ships it to Brazil- Operator does the measurement and ftp’s the data back to Europe- Engineer analyzes the data in detail (e.g. operational modal or basic STR)- Based on this analysis, the critical component is identified and can be replaced by the operator

Strength- Compact system, can be shipped without carnet- Template based recording, can be prepared



Oil & Gas

Where ?- Oil&Gas, production plants

Use Case- Operator needs to do a bi-monthly check of all pumps in an oil&gas or chemical plant- Predefined setup: 2 triax accelerometers, checking peaks in FFT spectra- If peaks shift compared to previous measurement, or if levels get higher this might be an indication

that something is breaking downStrength- Compact, battery operated, ruggedized for field use- Tablet operation- See and forget analysis



LMS SCADAS XSwww.lmsscadasxs.com

Restricted © Siemens AG 2014 All rights reserved. Smarter decisions, better products.

THANK YOULMS SCADAS XS – Extra Small. Extra Smart.

Technology

Siemens PLM Software: LMS SCADAS XS