SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.

Practical Cold Spray Coatings

Supersonic Spray Technologies

UltiLife™

and UltiFlow™

Modular NozzleAssemblies

SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.

Practical Cold Spray Coatings

UltiLife™ Straight Nozzle Assembly

• Ideal for spraying hard or abrasive materials and for prolonged life

• Can be used with SST Cold Spray portable or robotic systems.

• Spring loaded Bayonet Nut enables nozzle replacement without the need for tools.

• A 31% savings in operating cost

SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.

Practical Cold Spray Coatings

UltiLife™ Straight Nozzle Holder

• Manufactured with two orifice sizes 2.0mm & 2.5mm diameter. • The UltiLife holder is manufactured from high wear-resistant

material that extends holder life by up to a factor of 10, giving a 21% savings in operating cost

• Select this holder for applications that will be spraying hard metals, abrasive media, & blends

SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.

Practical Cold Spray Coatings

UltiLife™ Nozzle 120 mm

• The UltiLife nozzle is manufactured from a high wear-resistant material that extends nozzle life by up to a factor of 80, giving a 34% savings in operating cost

• Standard nozzle lengths are 70 & 120 mm• Use UltiLife nozzles when spraying hard metals, abrasive media,

& blends

SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.

Practical Cold Spray Coatings

UltiLife™ 90o Nozzle Assembly

• Can be used with SST Cold Spray portable or robotic systems.

• Spring loaded Bayonet Nut enables nozzle replacement without the need for tools.

SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.

Practical Cold Spray Coatings

UltiLife™ 90-Deg. Nozzle Holder

• Manufactured in two orifice sizes 2.0 & 2.5mm diameter.• The UltiLife holder is manufactured from high wear-

resistant material that extends holder life by a factor of up to 10

SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.

Practical Cold Spray Coatings

UltiLife™ Nozzle 70 mm

• The UltiLife nozzle is manufactured from a high wear-resistant material that extends nozzle life by a factor of up to 80

• Standard nozzle lengths are 70 & 120 mm• Use UltiLife nozzles when spraying hard metals, abrasive

media, & blends

SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.

Practical Cold Spray Coatings

UltiFlow™

Straight Nozzle Assembly

• Ideal for spraying pure materials• Reduces potential for clogging. • Can be used with SST Cold

Spray portable or robotic systems.

• Spring loaded Bayonet Nut enables nozzle replacement without the need for tools.

SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.

Practical Cold Spray Coatings

UltiFlow™ Straight Nozzle Holder

• Manufactured in two orifice sizes 2.0 & 2.5 mm diameter.• The UltiFlow holder is manufactured with a material that is

ideally suited to spraying pure Al, Zn, & Sn without clogging.• Up to 1.5 Hours continuous use

Maximum operating Temperature 350 Deg. C

SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.

Practical Cold Spray Coatings

UltiFlow™ Nozzle 120 mm

• The UltiFlow nozzle is manufactured with a material that is ideally suited to spraying pure Al, Zn, & Sn without clogging

• Up to 1.5 Hours continuous use • Standard nozzle lengths are 70 & 120 mm

Maximum operating Temperature 350 Deg. C

SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.

Practical Cold Spray Coatings

UltiFlow™ 90-Deg. Nozzle Assembly

• Ideal for spraying pure materials

• Reduces potential for clogging.

• Can be used with SST Cold Spray portable or robotic systems.

• Spring loaded collet enables nozzle replacement without the need for tools.

SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.

Practical Cold Spray Coatings

UltiFlow™ 90-Deg. Nozzle Holder

Maximum operating Temperature 350 Deg. C

• Manufactured in two orifice sizes 2.0 & 2.5 mm diameter.• The UltiFlow holder is manufactured with a material that is

ideally suited to spraying pure Al, Zn, & Sn without clogging.• Up to 1.5 Hours continuous use

SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.

Practical Cold Spray Coatings

UltiFlow™ Nozzle 70 mm

Maximum operating Temperature 350 Deg. C

• The UltiFlow nozzle is manufactured with a material that is ideally suited to spraying pure Al, Zn, & Sn without clogging

• Up to 1.5 Hours continuous use • Standard nozzle lengths are 70 & 120 mm

SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.

Practical Cold Spray Coatings

UltiLife™ and UltiFlow™

more choices for Practical Cold Spray Coatings

Custom sizes are available

CONTACT US TODAY TO DISCUSS YOUR NEEDS

SST is a Division of CenterLine Holdings Inc. © 2011 CenterLine Holdings Inc.

Practical Cold Spray Coatings

CONTACT INFORMATION

Wally Birtch Dip. Mechanical Engineering (Aerospace) Technologist Cell: 248-218-1173Senior Application Development Engineer wally.birtch@cntrline.com

Ed Malison B.Sc., NACE Certified Coatings Inspector #12392 Cell: 519-835-6422 Director of Business Development ed.malison@cntrline.com

www.supersonicspray.com

CenterLine (Windsor) LimitedSupersonic Spray Technologies

655 Morton Drive, Windsor ON N9J 3T9Tel 519-734-8464