Tyre Recycle Machine by GLOBALTECH ENERGY RESOURCES ( MALAYSIA)

1Green Technology. Environmental Friendly. JAS Approval. High Efficiency

WelcomeWelcomeWelcomeWelcometoto

Our PresentationOur Presentation

2

Introducing Introducing

Oil & Carbon Extraction Oil & Carbon Extraction Machine WJ-T-6 NGMachine WJ-T-6 NG

( RECYCLE USED/WASTE TYRE )( RECYCLE USED/WASTE TYRE )

RECYCLERECYCLEwith

PYROLYSIS TECHNOLOGYPYROLYSIS TECHNOLOGYGreen Technology. Environmental Friendly. JAS Approval. High Efficiency

3

The Proven Low Cost System in Recycle Scrap TyresInto

Oil (Fuel), Steel Wires and Black Carbon

Green Technology. Environmental Friendly. JAS Approval. High Efficiency

TYRE RECYCLE MACHINE WJ-T-6 NGTYRE RECYCLE MACHINE WJ-T-6 NG

4

The process of Extracting Oil and Raw materials from Scrap Tyres requiresto go through a series of heat cycles in an Oxygen free environment in orderfor tyre materials to be extracted out. This process is called Pyrolysis.

The Process is carried out at temperatures typically above 400 Celcius and atvery Low Pressures. The Output of Pyrolysis are gases, quantities of liquid, and solidresidue containing carbon and ash. The gases produced in in the process willbe used to provide the heating energy for continuing the process. The end products of the pyrolysis process will be the commercial valuable materials such as Oil, Black Carbon and Steel. This pyrolysis oil can then be used as a replacement diesel fuel or an alternative fuel.

THE PYROLYSIS RECYCLE PROCESSTHE PYROLYSIS RECYCLE PROCESS


5

VALUABLE RAW MATERIALS RECOVERED USINGOUR RECYCLING SYSTEM

VALUABLE RAW MATERIALS RECOVERED USINGOUR RECYCLING SYSTEM

FUEL OIL45%

SCRAP TYRES

SCRAP TYRES

STEEL WIRE10%

BLACK CARBON30%

MATERIALS CAN BE RECOVERED


6

RECYCLE CAPABILITY OF THE TYRE RECYCLE MACHINE

RECYCLE CAPABILITY OF THE TYRE RECYCLE MACHINE

INPUT

SCRAP TYRES 4 TON

TYRE RECYCLE MACHINE12 HRS PER CYCLE

OUTPUT

FUEL OIL1.8 TON

FUEL OIL1.8 TON

STEEL WIRE0.4 TON

STEEL WIRE0.4 TON

BLACK CARBON1.2 TON

BLACK CARBON1.2 TON


SCRAP

SCRAP

TYRES

TYRES

7

FUELOIL

COMMERCIAL VALUE OF THESE MATERIALSCOMMERCIAL VALUE OF THESE MATERIALS

STEELWIRE

BLACKCARBON

RM 1.20/Ltr

RM 0.30/KG

RM 0.05/KG

MARKET VALUERECOVERED MATERIALS

* Please note that the market value is base on July 2011 and in Malaysia


8

1. THE PROCESSING CHAMBER

OUR PROVEN WJ-T-6 NG TYRE RECYCLE SYSTEMOUR PROVEN WJ-T-6 NG TYRE RECYCLE SYSTEM

Key Features :

* Horizontal Revolving for Better Efficiency.

* Proven Design.

* Maintenance Free Design.

* Low Operating Cost.

* Chamber Operated by only a Single motor (3 kW).

* Long Life Span.

* Noiseless Operation.


9


1a). SIMPLE OPERATION FOR LESS MAINTENANCE

Key Features :

* Maintenance Free Design.

* Low Operating Cost.

* Chamber Operated by only a Single motor (5.5 kW).


10


1b). HIGH EFFICIENCY CHAMBER DESIGN Key Features :

* Use specially Boiler Steel made material for extra Reliability.

* Designed for good uniformity of heat distribution in the chamber for more efficient processing.

* Outer layer are securely sealed to prevent any heat losses.


11


4) THE OUTGASSES TREATMENT CHAMBER

Key Features :

* Outgasses are treated.

* No TOXIC / Hazardous Emission.

* No Pollution.

* Environment.

* Proven Clean.


12


4) THE COOLING CONDENSERSKey Features :

* High Efficiency in cooling.

* Solid Designed to withstand High Temperature.

* Securely sealed and tightened to prevent any gas leakage.


13


4) THE CONTROLLERKey Features :

* Simple Operations.

* Real time monitoring on the Process.

* Safety cut off features.


14


4) THE HEATING CHAMBER

Key Features :

* Self Fueled Burning Chamber Concept.

* No external energy source required during processing.

* Super energy cost savings.


15

MACHINE SPECIFICATIONSMACHINE SPECIFICATIONS

WJ-T-6 NGScrap Tyres / Rubber / PlasticsHorizontal Rotation4 TON per 12 hours0.4 Turn per minute8.0 - 10 KWWater CooledAnnular gear drivenHot AirWith Foundation<=85 db6m X 2.2m30m X 15m4.5 TONCertifications by CNAS, IAF, ISO4-8 Weeks2-4 Weeks

Equipment ModelRaw Material InputStructureProduction CapabilityRevolving Chamber rotation speedPower consumptionCooling SystemDriveHeating MethodType of InstallationNoiseMachine Dimension (L x W)Space RequiredWeightQuality CertificationsDelivery Installation


16

WJ-T-6 NG RECYCLE MACHINE VIDEO CLIPSWJ-T-6 NG RECYCLE MACHINE VIDEO CLIPS

<Click the Picture to start viewing the video>


17

WJ-T-6 NG RECYCLE MACHINE VIDEO CLIPSWJ-T-6 NG RECYCLE MACHINE VIDEO CLIPS



18

WJ-T-6 NG RECYCLE MACHINE VIDEO CLIPSWJ-T-6 NG RECYCLE MACHINE VIDEO CLIPSWJ-T-6 NG RECYCLE MACHINE VIDEO CLIPSWJ-T-6 NG RECYCLE MACHINE VIDEO CLIPS



19

TYRE RECYCLE MACHINE PLANT

20

MAIN ROTARY OVEN

AIR MANIFOLD

COOLING CONDENSER

OIL STORAGE TANK

ELECTRIC CONTROL BOX

FIRE CHAMBER(FURNACE)

RESIDUAL OIL TANK

HYDROSEAL(GAS TANK)

DRAFT FAN (BLOWER)

CHIMNEY

DEDUSTING ROOM

WASTE GAS PIPE

SCRAP TYRE FEED INLET

CARBON DISCHARGE OUTLET

FLUE CONDENSER

OIL PIPELINE

MOTOR REDUCER 3 kW

DRAFT TRUNK

21

RETURN OF INVESTMENT (ROI) RETURN OF INVESTMENT (ROI)

ITEM OF COST COST UNIT PRODUCTION TIME PRICE (RM)

Scrap Tyres 8 Ton Per Day 1440Salary (7 People) 1 Day 350

Package (Jumbo Bag) 4 Unit 60Others 1 Day 50Wood 1 Day 120.00

Eletricity / Water Cost) 1 Day 70.00Rental Cost 1 Day 166.00

Maintenance Cost 1 Day 50.00Fuel 1 Day 10.00

TOTAL 2316.00

OPERATION COST PER DAY : RM 1341.00OPERATION COST PER DAY : RM 1341.00

ITEM & OUTPUT SELLING PRICE (RM) TOTAL

Fuel Oil (3600 Liter) 1.20 4320.00Steel Wire (800 kg) 0.30 240.00

Black Carbon (2400 kg) 0.05 120.00TOTAL 4680.00

SALES GENERATED PER DAY : RM 3188.00SALES GENERATED PER DAY : RM 3188.00

Profit Generated Per Day : RM 4680.00Cost & Overhead Per Day : RM 2316.00Total Profit Per Day : RM 2364.00 x 24 Day = RM 56,736.00 (Monthly Profit)

RM 44,328.00 x 12 Month = RM 680,832.00 (Yearly Profit)

PLEASE COTACT US TO VISIT A DEMO PLANTAND WE ALSO PROVIDE DVD COPY

Malaysia Contact : Mr. Kent Chih, +6016- 2700 207

23“ RECYCLE for a SAFER ENVIRONMENT “