university-of-zilina documents

DETERMINATION OF THE OPTIMAL TEMPERING TEMPERATURE IN HARD FACING OF THE FORGING DIES
Documents DETERMINATION OF THE OPTIMAL TEMPERING TEMPERATURE IN HARD FACING OF THE FORGING DIES
STRUCTURAL CHARACTERISTICS & DIELECTRIC PROPERTIES OF TANTALUM OXIDE DOPED BARIUM
Documents STRUCTURAL CHARACTERISTICS & DIELECTRIC PROPERTIES OF TANTALUM OXIDE DOPED BARIUM
SOLUTION TREATMENT EFFECT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AUTOMOTIVE CAST ALLOY
Documents SOLUTION TREATMENT EFFECT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AUTOMOTIVE CAST ALLOY
CYCLIC PLASTIC BEHAVIOUR OF UFG COPPER UNDER CONTROLLED STRESS AND STRAIN LOADING
Documents CYCLIC PLASTIC BEHAVIOUR OF UFG COPPER UNDER CONTROLLED STRESS AND STRAIN LOADING
INFLUENCE OF COOLING RATE DURING QUENCHING ON IMPACT TOUGHNESS OF A HOT-WORK TOOL STEEL AT
Documents INFLUENCE OF COOLING RATE DURING QUENCHING ON IMPACT TOUGHNESS OF A HOT-WORK TOOL STEEL AT
THE EFFECT OF REFLOW ON WETTABILITY OF Sn 96.5 Ag 3 Cu 0.5 SOLDER
Documents THE EFFECT OF REFLOW ON WETTABILITY OF Sn 96.5 Ag 3 Cu 0.5 SOLDER
QUALITY OF WELD CLADS APPLIED BY SAW METHOD IN ADHESIVE WEAR CONDITIONS
Documents QUALITY OF WELD CLADS APPLIED BY SAW METHOD IN ADHESIVE WEAR CONDITIONS
UTILIZATION OF STEREOLOGY FOR QUANTITATIVE ANALYSIS OF PLASTIC DEFORMATION OF FORMING PIECES
Documents UTILIZATION OF STEREOLOGY FOR QUANTITATIVE ANALYSIS OF PLASTIC DEFORMATION OF FORMING PIECES
PROPERTIES OF PLASMA AND HVOF SPRAYED COATINGS
Documents PROPERTIES OF PLASMA AND HVOF SPRAYED COATINGS
STUDY OF CALCIUM PHOSPHATE (DCPD) ELECTRODEPOSITION PROCESS ON THE Mg-3Al-1Zn
Documents STUDY OF CALCIUM PHOSPHATE (DCPD) ELECTRODEPOSITION PROCESS ON THE Mg-3Al-1Zn
AN APPARATUS OF INCREASED PRECISION FOR THE MEASUREMENT OF ELECTRO-OPTICAL PARAMETERS
Documents AN APPARATUS OF INCREASED PRECISION FOR THE MEASUREMENT OF ELECTRO-OPTICAL PARAMETERS
SELF-LUBRICATING THIN FILMS FOR TOOL STEELS
Documents SELF-LUBRICATING THIN FILMS FOR TOOL STEELS
THE STUDY OF MOLTEN ZINC INTERACTION ON THE SURFACE OF REFRACTORIES IN THE PRODUCTION OF ZINC OXIDE
Documents THE STUDY OF MOLTEN ZINC INTERACTION ON THE SURFACE OF REFRACTORIES IN THE PRODUCTION OF ZINC OXIDE
THERMAL STABILITY OF Al-Cu-Fe QUASICRYSTALS PREPARED BY SHS METHOD
Documents THERMAL STABILITY OF Al-Cu-Fe QUASICRYSTALS PREPARED BY SHS METHOD
IMPACT STRENGTH AND FAILURE ANALYSISOF WELDED DAMASCUS STEEL
Documents IMPACT STRENGTH AND FAILURE ANALYSISOF WELDED DAMASCUS STEEL
THE QUALITY OF MATERIALS APPLIED FOR SLEWING BEARING RACEWAY – TECHNICAL PAPER
Documents THE QUALITY OF MATERIALS APPLIED FOR SLEWING BEARING RACEWAY – TECHNICAL PAPER
INVESTIGATING THE JOINING OF PMMA PLASTIC TO STEEL BY Nd:YAG LASER
Documents INVESTIGATING THE JOINING OF PMMA PLASTIC TO STEEL BY Nd:YAG LASER
STUDY ON PHYSICAL - MECHANICAL PROPERTIES OF ALKALI ACTIVATED MATERIALS BASED ON FLY ASH
Documents STUDY ON PHYSICAL - MECHANICAL PROPERTIES OF ALKALI ACTIVATED MATERIALS BASED ON FLY ASH
INFLUENCE OF SHOT PEENING ON AISI 316Ti FATIGUE PROPERTIES
Documents INFLUENCE OF SHOT PEENING ON AISI 316Ti FATIGUE PROPERTIES
STRUCTURAL DEGRADATION OF HETEROGENEOUS WELDED JOINTS
Documents STRUCTURAL DEGRADATION OF HETEROGENEOUS WELDED JOINTS
DETERMINATION OF STATIC LIMITING LOAD CURVES FOR SLEWING BEARING WITH APPLICATION OF THE FEM
Documents DETERMINATION OF STATIC LIMITING LOAD CURVES FOR SLEWING BEARING WITH APPLICATION OF THE FEM