What is back brushing?

Here are 14 Key Questions You Should Ask Any

Contractor

What is back brushing?

Here are 14 Key Questions You Should Ask Any

Contractor

Back brushing is a term used in exterior

paint terminology.

Here are 14 Key Questions You Should Ask Any

Contractor

Spray application causes paint to settle

on the surface of the substrate you are

coating, which is fine when you are

spraying a smooth or non-porous

surface,

Here are 14 Key Questions You Should Ask Any

Contractor

like Hardi Plank Siding. However, if the

siding is cedar, the spray application is

essentially the tool to apply the paint

Here are 14 Key Questions You Should Ask Any

Contractor

and back brushing provides the

“pushing” of the paint into the cracks

and crevices to be covered.

Here are 14 Key Questions You Should Ask Any

Contractor

Industry standard paint film is uniform,

complete coverage, no bubbles or pin

holes present in the coating.

Here are 14 Key Questions You Should Ask Any

Contractor

This method allows for the experienced

painter to apply paint in a matter of

seconds and a second man to follow

with brush and roller to finish the area.

Here are 14 Key Questions You Should Ask Any

Contractor

This provides more millage than when

just spray applied.

Here are 14 Key Questions You Should Ask Any

Contractor

It is the mil build and superior

penetration that gives the back brushed

paint job the longevity over its

counterpart of just sprayed.

Here are 14 Key Questions You Should Ask Any

Contractor

The first coat is applied and allowed to

dry 2 hours or longer, before the final

finish coat is applied, per industry

standard.

Call us today at

425-488-1192

Or Visit Us Online at

PaintingAmericaInc.com