Product News - Amazon AWS

Product NewsTHE DRAG SPECIALTIES MAY 2021

1 +49 (0) 6501 96 95 -2000 • partseurope.eu

KHROME WERKSKhrome Werks creates industry-leading products with style, fit and finish that never disappoint. Their lineup of exhaust headers and slip-on mufflers offer stylish performance with a signature, strong exhaust note without any annoying high-frequency noise.

2-INTO-1 SYSTEMS WITH THREE-STEP HEADERS• Designed to increase horsepower and torque while

providing an aggressive, low-frequency sound level• 1,75” to 1,875” to 2” high-flow 16-gauge stepped

primary headers with a 2,5” collector• 4,5” diameter, 16-gauge HP-Plus muffler with 2,5” inlet• Removable 1,5” absorptive baffle with 3” reverse cone outlet

to maximize torque; baffle is wrapped in stainless steel wool and high-temp fiberglass for a rich, mellow tone

• 2,50”, 220°, 16-gauge heat shields• 18 mm and 12 mm O2 bungs welded into the primaries• Optional Ghost pipe available separately to give a 2-into-2 look

PART # DESCRIPTIONFOR 17-21 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLTRK1800-2514 Chrome1800-2515 BlackOPTIONAL COMPONENT1861-1573 Chrome ghost pipe

1800-25141800-2515

1861-1573

4,50” HP-PLUS® SLIP-ON MUFFLERS• Engineered for performance, style and sound• Produce the Khrome Werks signature, authoritative

tone without annoying high-frequency noises• 4,50” 16-gauge muffler body• Absorptive baffle covered with stainless steel

mat and high-temp fiberglass• Improved torque and horsepower from the hit of the throttle• Billet aluminum tips can be rotated 360° at 90° increments;

feature a high-temp powdercoated finish• Sold in pairs

PART # DESCRIPTIONFOR 17-21 FLHT/ FLHTK/ FLHX/ FLHR/ FLTRX/ FLTRU/ FLTRK MODELS1801-1481 Obsidian w/ Obsidian Tracer Tip billet end caps1801-1482 Obsidian w/ Obsidian Edge billet end caps1801-1484 Chrome w/ chrome Edge billet end capsFOR 99-16 FLT/ FLHT/ FLHR/ FLHX/ FLTR MODELS1801-1483 Chrome w/ chrome Edge billet end caps

1801-1481

1801-1482

1801-1483

2 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

FLARE™ SERIES WINDSHIELD TRIM• Machined from 10-gauge billet aluminum and optional black contrast• Perfect accent for a new Flare™ Windshield or a stock

windshield on a batwing-style fairing• Two new styles to choose from• Will work with OEM hardware• Hardware and instructions included

PART # DESCRIPTIONFOR 14-21 FLHT/ FLHX AND FLHTCUTG MODELS2350-0510 Black w/ KERF (Klock Werks logo)FOR 15-21 FLTRX/ FLTRXS/ FLTRU/ FLTRK MODELS2350-0509 Black w/ KERF (Klock Werks logo)

2350-0509

2350-0510

BOOM MAT TAPE• 2 mm thick butyl with .004” black finish• Easy-to-remove clear release liner• Perfect for covering seams/ gaps, spot coverage for vibration

and securing/ protecting cables, wires and lines• 51 mm (2”) x 6,1 m (20’) roll

PART # DESCRIPTION0521-1879 Boom mat tape

HI-TEMP SHRINK TUBES• Professional grade, military spec, flexible polyolefin tubing• Provides excellent protection from dirt, dust, solvents and foreign materials• Also provides strain relief• 3:1 shrink ratio without reduction to original length• Use to insulate wires, connections, terminals, wire splicing and more• Works for -55 °C (-67 °F) to 135 °C (275 °F) temperatures• Apply at 49 °C (120 °F) to 82 °C (180 °F) with a heat gun

PART # DESCRIPTIONSHRINK TUBES2120-1081 3 mm x 122 cm (4’)2120-1082 6 mm x 122 cm (4’)2120-1083 3 mm/6 mm/9 mm x 122 cm (4’)2120-1076 9 mm x 122 cm (4’)2120-1077 12 mm x 122 cm (4’)2120-1078 18 mm x 122 cm (4’)2120-1079 24 mm x 122 cm (4’)2120-1080 9 mm/12 mm/18 mm/24 mm x 61 cm (2’)

PART # DESCRIPTIONSHRINK TUBE SPOOLS2120-1088 3 mm x 15,2 m (50’)2120-1089 6 mm x 15,2 m (50’)2120-1084 9 mm x 15,2 m (50’)2120-1085 12 mm x 15,2 m (50’)2120-1086 18 mm x 15,2 m (50’)2120-1087 24 mm x 15,2 m (50’)

2120-1077

2120-1079

2120-1081

2120-1086

3 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

15 CM X 23 CM (6” X 9”) LID SPEAKERS• 200-watt, 2-ohm lid speakers with custom silicone gaskets

to fit perfectly with all years of Hogtune lids • Feature studio-quality polystyrene capacitors for crossover • Sold in pairs

PART # DESCRIPTION4405-0714 15 cm x 23 cm (6” x 9”) lid speakers

SPEAKER LID KITS WITH 15 CM X 23 CM (6” X 9”) SPEAKERS• Includes high-impact ABS replacement saddlebag

lids, 200-watt, 2-ohm motorcycle 15 cm x 23 cm (6” x 9” speakers), grilles, gaskets, striker plates, grommets, wire harness and required hardware

• Speakers offer superior bass response and overall better sound; large magnet assembly for higher power handling

• Factory latch/ lock mechanism bolts into new lids• Features a built-in water drainage

system to keep everything dry• Available in matte black, primed and ready for paintNOTE: Required amplifier is not included.

PART # DESCRIPTION

4405-0716For 14-20 FLHT/ FLHX/ FLHR/ FLTRX/ FLTRU/ FLTRK models w/ hard saddlebags

4405-0715 For 98-13 FLHT/ FLHX/ FLHR/ FLTR models w/ hard saddlebags

4405-0715

4405-0716

4 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

LOW-PROFILE TOURING SEATS WITH FORWARD-POSITIONING• Features solar-reflective leather in the

seating area and automotive-grade vinyl on the sides (unless noted); patented process reduces surface temperature by as much as 14 °C (25 °F) for a cooler seat, higher durability and longer life over conventional leather or vinyl

• 5 mm (3/16”) ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint

• Seat is made narrow up front for better leg clearance to ground contact

• Seat moves the rider forward 25 mm (1”) and 13 mm (1/2”) lower compared to the factory seat

• Seat is 51 mm (2”) further forward compared to stock seat

• Includes all mounting hardware

PART # DESCRIPTIONFOR 14-21 CHIEF/ CHIEFTAIN, CHIEFTAIN VINTAGE/ CLASSIC/ LIMITED, 16-21 DARK HORSE, 17-21 SPRINGFIELD, 15-21 ROADMASTER81 CM L OVERALL (37,5 CM L X 37,5 CM W FRONT) (38 CM L X 28 CM W REAR), 12,5 CM RISE; 32” L OVERALL (143/4” L X 143/4 “ W FRONT) (15” L X 11” W REAR), 5” RISE0810-22731 Smooth, vinyl0810-2274 Double diamond, black thread0810-2275 Double diamond, silver thread0810-2276 Double diamond, red thread1 Not solar-reflective leather.

DRAG SPECIALTIES SEATSQuality seats built by hand using only the finest materials. The highly skilled team of craftsmen and women take pride in creating innovative designs that enhance the style and comfort of American V-Twins. Popular seat styles are now available for the latest bikes. Add comfort and style with a Drag Specialties Seat.

PREDATOR III FORWARD POSITIONING SEATS• High-quality automotive-grade vinyl • Molded polyurethane foam for maximum comfort and styling• 5 mm (3/16”) ABS thermoformed seat base for a perfect fit, with

a carpeted bottom and rubber bumpers to protect paint • Features a 16,5 cm (61/2”) tall driver support• Seat is made narrow up front for better leg clearance • Seat moves the rider forward 25 mm (1”) and 13 mm

(1/2”) lower compared to the factory seat • Seat geometry is 51 mm (2”) further forward than the

Drag Specialties Predator III standard seat• Includes all mounting hardware

PART # DESCRIPTIONFOR 14-21 CHIEF/ CHIEFTAIN, CHIEFTAIN VINTAGE/ CLASSIC/ LIMITED, 16-21 DARK HORSE, 17-21 SPRINGFIELD, 15-21 ROADMASTER81 CM L OVERALL (37,5 CM L X 32 CM W FRONT) (30,5 CM L X 18 CM W REAR); 32” L OVERALL (143/4” L X 121/2” W FRONT) (12” L X 71/4” W REAR) 61/2” RISE0810-2270 Double diamond, black thread0810-2271 Double diamond, silver thread0810-2272 Double diamond, red thread

0810-2274

0810-2275 0810-2276

0810-2270 0810-2271 0810-2272

5 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

0822-0443 0822-0444 0822-0445

SHORT BACKREST PADS FOR SQUARE SISSY BARS• Pads fit tall, 14 mm (9/16”) square or round

Drag Specialties sissy bars and most Harley-Davidson sissy bars with a 10 cm (4”) wide ID

• High-quality automotive-grade vinyl on sides and in the contact area

• Each pad comes with two black powdercoated 12-gauge brackets and four 1/4” x 20 screws

• Pads measure 18 cm H x 14 cm W x 51 mm thick (7” H x 51/2” W x 2” thick)

NOTE: Pads will not fit sissy bars with welded inserts.

PART # DESCRIPTION0822-0443 Double diamond, black stitch0822-0444 Double diamond, silver stitch0822-0445 Double diamond, red stitch

LED HANDLEBAR MARKER LIGHTS• Feature billet aluminum housings• Measure 25,4 mm W x 13 mm T (1” x 1/2”)• Single-function high-intensity amber LEDs

with amber or smoke lenses• Wire leads are 91 cm (36”) long• Can be mounted using the mirror stems

or mirror stem mounting bolts• Chrome or black anodized finish• Sold in pairs

PART # DESCRIPTIONFOR 09-16 FLHT/ FLHR/ FLTR/ FLHX, 16-17 FLSS/ FLSTFBS, 09-17 V-ROD W/ HYDRAULIC CLUTCH2040-2128 Chrome w/ amber lens2040-2129 Chrome w/ smoke lens2040-2130 Black w/ amber lens2040-2131 Black w/ smoke lensFOR 09-17 FLHT/ FLHR/ FLHX/ FLTR, 15-20 SOFTAIL W/ MECHANICAL CLUTCH2040-2140 Chrome w/ amber lens2040-2141 Chrome w/ smoke lens2040-2142 Black w/ amber lens2040-2143 Black w/ smoke lens

PART # DESCRIPTIONFOR 00-14 SOFTAIL, 99-17 DYNA, 96-03 XL2040-2132 Chrome w/ amber lens2040-2133 Chrome w/ smoke lens2040-2134 Black w/ amber lens2040-2135 Black w/ smoke lensFOR 04-20 XL2040-2136 Chrome w/ amber lens2040-2137 Chrome w/ smoke lens2040-2138 Black w/ amber lens2040-2139 Black w/ smoke lens

FORK SEAL AND DUST WIPER KITS• Seal profile is engineered to create

equal pressure in each seal lip; equalized seal pressure creates less drag and longer seal life

• MAX-LIFE has a coefficient of friction up to three times less than the OEM seal material

• Triple-lip seal design• Directional ribs allow seal

to be installed easily• Kit includes fork seals and dust wipers

PART # DESCRIPTION

0407-0675For 13-16 FXSB/SE, 08-11 FXCW/C, 06-17 FXD/ FXDWG, 16-20 XL1200X/XS, 02-11 V-Rod (49 mm)

0407-0677 For 84-13 FXS/ FXST, 93-05 FXDWG, 84-86 FXWG (41 mm)

0407-0674 For 91-05 FXD, L87-00 FXR, L87-20 XL (except XL1200X/XS (39 mm)

0407-0673 For 86-E87 XL (35 mm)0407-0676 For 15-20 XG500/ 750 (except 750A)

FORK SEAL AND DUST SEAL KITS• Seal design and special elastomer has 1/3 of the stiction

and up to four times the life of an OEM seal• Dual-lip design balances the drag forces across both

sealing lips resulting in less lip distortion, which extends seal life and reduces seal operating temperature

• Sold 10-pk.

PART # DESCRIPTIONFOR 14-20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLTRK, FL TRIKE, 18-20 SOFTAILS, 08-11 FXCW, 06-17 FXD/ FXDWG, 16-20 XL1200X/XS, 02-11 VRSC W/ 49 MM FORKS0407-0669 Fork seals (10-pk); repl. OEM #46514-010407-0670 Dust seals (10-pk.); repl. OEM #46512-01FOR 84-13 FLT/ FLHT/ FLHX/ FLHR/ FLTR AND H-D FL TRIKE MODELS, 84-17 FXS/ FXST/ FLS/ FLST MODELS, 12-16 FLD, 93-05 FXDWG, 84-86 FXWG MODEL MODELS W/ 41 MM SHOWA FORKS0407-0668 Fork oil seals (10-pk) ; repl. OEM #45875-840407-0672 Dust seals (10-pk)FOR 91-05 FXD, L87-00 FXR AND AND L87-20 XL MODELS W/ 39 MM SHOWA FORKS0407-0667 Fork oil seals (10-pk) ; repl. OEM #45378-870407-0671 Fork wiper seals (10-pk) ; repl. OEM #45401-87

2040-2129

2040-2135

0407-0677

0407-0670

6 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

REPLACEMENT STARTER SOLENOID• High quality replacement component • Fully assembled for easy installation

PART # DESCRIPTION2110-1099 For 17-20 M-Eight

GLOSS BLACK LACED WHEELS• 40-spoke tube-type wheel

features gloss black powdercoat steel rim, chrome spokes and gloss black powdercoat steel hub

• Fully assembled and trued with bearings installed and end play set

• Available in most applications• Uses OEM mounting hardware;

designed to use OEM-style rotors, pulleys and sprockets

PART # DESCRIPTIONVALVE STEM STYLE

FRONT WHEELS

0203-0664 16” x 3” for 00-06 FLST/C/F/N; repl. OEM #43005-00 SMV

0203-0670 21” x 2,15” for 97-99 FXST, 97-99 FXDWG (single disc); repl. OEM #43671-84A CMV

REAR WHEELS0204-0572 16” x 3” for 02-07 FLT; repl. OEM #41052-02 SMV

PART # DESCRIPTIONVALVE STEM STYLE

REAR WHEELS (CONT)

0204-057016” x 3” for 00-05 FXST, 00-06 FLST, 00-05 FXD/ FXDWG, 00-04 XL; repl. OEM #40975-00/ 40700-03

SMV

0204-0573 16” x 3” for 97-99 FXST/ FLST, 97-99 FXD/ FXDWG, 97-99 XL; repl. OEM #40975-86A SMV

0204-0574 16” x 3” for 08-20 XL (w/o ABS) SMV

0203-0664 0204-0573

BOLT COVER KITS• Beautifully designed pieces to cover the raw OEM bolt heads

on your engine, transmission, primary and more• Easy to install with included detailed installation instructions• Made from ABS material, fasten with silicone; sold separately• Available in chrome or black finishes• Engine kits include motor bolt covers only• Deluxe kits include motor/ transmission/ primary and select chassis bolt covers

PART # DESCRIPTIONFOR ALL 17-20 M-EIGHT MODELS2404-0984 Engine kit, chrome2404-0985 Engine kit, black2404-0982 Deluxe kit, chrome2404-0983 Deluxe kit, black

2404-0984

2404-0983

7 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

STEP-UP SEATS• Saddlemen has collaborated with top freestyle

performers to create the new T-sport inspired step-up lattice stitch (LS) or tuck-n’-roll (TR) seats

• LS seats infuse old-school lattice stitch retro styling with a modern twist

• TR seats feature true tuck-n’-roll styling• High lumbar keeps the rider locked into the seat• Features Saddlemen’s Ultra-Foam, which is

formulated to provide a perfect balance of rigidity and user compliance with integrated GelCore™ technology

• Brown whisper-grain SaddleHyde™ cover• Installs easily with all necessary mounting

hardware and instructions included

PART # DESCRIPTIONFOR 97-07 FLHT/ FLTR0801-1347 Front TR, rear LS0801-1349 Full LS

PART # DESCRIPTIONFOR 97-07 FLHT/ FLTR (CONT)0801-1352 Rear LS0801-1354 Front LS

0801-1347 0801-1349

0801-1352

0801-1354

SISSY BAR PAD FOR HOG KILLER SEATS• Perfect match for Saddlemen’s Hog Killer seats• Mounts to Harley-Davidson® accessory sissy bars and most

popular aftermarket brands with 12,5 cm (5”) width• Can be mounted using OEM/ aftermarket bolt pattern or can

mount using chrome brackets, which are included

PART # DESCRIPTION0822-0422 Gravestone 16,5 cm x 16,5 cm (6,5” x 6,5”)

HEATED SEAT WIRING HARNESS• Converts existing Saddlemen heated seat to a simple plug-and-play system• Includes harness and fuse box replacement cover

PART # DESCRIPTION2130-0313 Heated seat wiring harness

8 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

PERFORMANCE MACHINEThe M-Eight engine can benefit greatly from improved airflow to help it breathe. Performance Machine’s popular air cleaner styles are the way to go! The CNC-billet machined style and highly engineered performance add both visual performance and an added boost when you twist the throttle.

VINTAGE AIR CLEANERS• Lightweight, low-profile design• Installed with a high-flow air filter for better horsepower than stock units• Available in chrome, Contrast Cut™ and Black Ops™ finishes• For the complete line of Vintage air cleaners, see

page 579 of the 2021 Parts Europe FatBook

PART # DESCRIPTIONFOR 17-20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLTRK, 18-20 SOFTAILS W/ 107”/ 114” MOTOR1010-2676 Contrast Cut™

1010-2677 Chrome1010-2678 Black Ops™

MAX HP AIR CLEANERS• CNC-machined aluminum backing plate• Internal rubber breather tubes to eliminate oil leakage• Internal power cone design for smooth, laminar airflow• Innovative conical design for improved knee clearance• Contrast Cut™ finish starts with a polished air cleaner that has

been black anodized, then recut to open the design• Black Ops™ finish features gloss black on top of a contrasting

textured black finish for outstanding durability and looks• All mounting hardware and gaskets included• For the complete line of Max HP air cleaners see page

577 of the 2021 Parts Europe FatBook

1010-2676 1010-2677 1010-2678

AIR CLEANERSPART # DESCRIPTIONFOR 17-20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLTRK, 18-20 SOFTAILS W/ 107”/ 114” MOTOR1010-2673 Contrast Cut™

1010-2674 Chrome1010-2675 Black Ops™

1010-2673 1010-2674 1010-2675

9 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

SUPER GAS AIR CLEANERS• Versatile design accepts interchangeable

faceplates that are designed to match Performance Machine wheels (see page 578 of the 2021 Parts Europe Fatbook for optional faceplates)

• Air cleaners include a K&N filter behind a stainless steel wire mesh screen to allow high-volume airflow, resulting in increased horsepower

• Air cleaners and universal faceplates are sold separately and available in chrome, black, Contrast Cut™ and Platinum Cut finishes

• Contrast Cut™ finish starts with a polished faceplate that has been black anodized, then recut to open up the design

• Platinum Cut™ uses the same process as the Contrast Cut™, only the recut areas are then hand polished to a brilliant finish

PART # DESCRIPTIONAIR CLEANERSFOR 17-20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLTRK, 18-20 SOFTAILS W/ 107”/ 114” MOTOR1010-26681 Black1010-26691 ChromeFOR 08-16 FLHT/ FLHR/ FLHX/ FLTR/ H-D FL TRIKE, 16-17 FXDLS, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE AND 11-12 FLSTSE1010-26641 Black1010-26651 ChromeFOR 01-17 TWIN CAM W/ DELPHI EFI, 99-06 TWIN CAM W/CV CARB (EXCEPT 08-17 TOURING, 16-17 FXDLS, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE AND 11-12 FLSTSE), 99-06 BIG TWIN W/ CV CARB1010-26661 Black1010-26671 ChromeFOR 91-20 XL W/ CV CARB/ DELPHI EFI1010-26621 Black1010-26631 Chrome1 5/8” reduced assembly depth.

Black Chrome

JET AIR CLEANERS• Low-profile and lightweight air cleaner

is CNC-machined from billet aluminum• Innovative and versatile design

allows unit to be mounted in the vertical or horizontal position

• Compact design for improved knee clearance

• Features PM’s proven internal crankcase venting system

• Features a high-flow reusable air filter• Available in Contrast Cut™, chrome

and Black Ops™ finishes• Contrast Cut™ finish starts with a

polished air cleaner that has been black anodized, then recut to open the design

• Black Ops™ finish features gloss black on top of a contrasting textured black finish for outstanding durability and looks

• For the complete line of Jet air cleaners see page 579 of the 2021 Parts Europe FatBook

PART # DESCRIPTIONFOR 17-20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLTRK, 18-20 SOFTAILS W/ 107”/ 114” MOTOR1010-2670 Contrast Cut™

1010-2671 Chrome1010-2672 Black Ops™

1010-2670

1010-2671

1010-2672

10 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

ONE-PIECE ALUMINUM WHEELS• Forged wheels place the highest material strength in the same

direction as the operating load, creating a light and strong wheel• Assault style wheels feature the contour rim lip for a graceful arc from

rim to lip, while the Revolution style features a stepped rim lip• Available in platinum, chrome, anodized black or anodized gold finishes• For the complete line of Performance Machine One-Piece Aluminum

wheels see page 1730 of the 2021 Parts Europe FatBook

NOTE: Models with TPMS require PART #0360-0056 (sold separately).NOTE: Front wheels listed as fitting 08-20 Dresser models will

require the use of PM front brake rotors (3,25” bolt circle).NOTE: Front wheels include fender relocation

brackets for use with stock front fenders.

DESCRIPTIONFORMULA PLATINUM CUT

FORMULA CHROME

GALAXY PLATINUM CUT

PRO-AM BLACK OPS

PRO-AM GOLD OPS

FRONT WHEELS18” x 5.5” for 08-20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLTRK w/ ABS

0201-2367 0201-2368 0201-2366 0201-2371 0201-2372

DESCRIPTIONPARAMOUNT PLATINUM CUT

PARAMOUNT CHROME

ASSAULT BLACK

ASSAULT GOLD

REVOLUTION BLACK

REVOLUTION GOLD

FRONT WHEELS18” x 5,5” for 08-20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLTRK w/ ABS 0201-2369 0201-2370 - - - -

21” x 3,5” for 08-20 FLHT/ FLHR/ FLHX/ FLTRX w/ ABS (dual disc) - - 0201-2358 0201-2359 0201-2362 0201-2363

21” x 3,5” for 08-19 FLHT/ FLHR/ FLHX/ FLTRX w/o ABS (dual disc) - - 0201-2356 0201-2357 0201-2360 0201-2361

ASSAULTBLACK

REVOLUTIONBLACK

REVOLUTIONGOLD

ASSAULTGOLD

FORMULAPLATINUM CUT

FORMULA CHROME

GALAXYPLATINUM CUT

PARAMOUNT CHROME

PARAMOUNTPLATINUM CUT

PRO-AMBLACK OPS

PRO-AMGOLD OPS

11 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

AIR STINGER STEALTH AIR CLEANER KITS• Uses the S&S high-flow Stealth air cleaner and replaces

it with a similarly-shaped air filter element• Added air filter surface area improves airflow compared to the standard

Stealth air cleaner filter; huge improvement compared to the stock air filter• Filter element is washable and reuseable• Kit includes backing plate cover, filter and hardware• Available with classic mini teardrop or S&S ring cover

1010-2788WITH TEARDROP COVERPART # DESCRIPTIONFOR 17-20 M-EIGHT MODELS1010-2782 Chrome1010-2781 Gloss blackFOR 08-16 FLHT/ FLHR/ FLTR/ FLHX/H-D FL TRIKE, 16-17 SOFTAIL, 16-17 FXDLS, 11-12 FLSTE, 13-15 FXSBSE, 14-15 FLSTNSE MODELS1010-2780 Chrome1010-2779 Gloss blackFOR 01-17 TWIN CAM W/ DELHPI EFI (EXCEPT THROTTLE-BY-WIRE MODELS)1010-2777 Chrome1010-2778 Gloss blackFOR 07-20 XL1010-2783 Chrome1010-2784 Gloss black

WITH S&S RINGPART # DESCRIPTION1010-2787 For 17-20 M-Eight

1010-2786For 08-16 FLHT/ FLHR/ FLTR/ FLHX/H-D FL Trike, 16-17 Softail, 16-17 FXDLS, 11-12 FLSTE, 13-15 FXSBSE, 14-15 FLSTNSE models

1010-2785 For 01-17 Twin Cam w/ Delphi EFI (except Throttle-By-Wire models)

1010-2788 For 07-20 XL

1010-2777

1010-2786

1010-2781

12 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

32 MM (11/4”) EZ INSTALL FLAT TOP HANDLEBARS• Revolutionary interlocking bolt-together two-piece

handlebar design that takes up half the shelf space, is economical to ship and even faster to install

• CNC mandrel-bent from 32 mm (11/4”) diameter x 3 mm (0,120”) wall heavy tube

• EZ Install - no more need to fight internal wiring; with our handlebars you can install wiring in minutes

• Bars are knurled and notched for TBW applications• Bars with “squared” lower bends also have

additional slots to ease wire routing• Available in chrome or gloss black

powdercoated finishesNOTE: Accept OEM heated grips.NOTE: U.S. Patent No. 10,946,926.

CHROME GLOSS BLACK END RISE WIDTH CENTER WIDTH PULLBACKFOR 86-20 FLHT, FLHTC , FLHTCU, FLHTK, FLHX AND FLHTCUTG, FLHXXX (25,4 MM (1”) CLAMPING AREA)0601-5504 0601-5508 25,5 cm (10”) 91 cm (36”) 39,5 cm (151/2”) 23 cm (9”)0601-5505 0601-5509 30,5 cm (12”) 91 cm (36”) 39,5 cm (151/2”) 23 cm (9”)0601-5506 0601-5510 35,5 cm (14”) 91 cm (36”) 39,5 cm (151/2”) 23 cm (9”)0601-5507 0601-5511 40,5 cm (16”) 91 cm (36”) 39,5 cm (151/2”) 23 cm (9”)

0601-5504 0601-5510

32 MM (11/4”) TWIN PEAK HANDLEBARS• A perfect fit for your Indian Challenger• Designed for internal wiring• Pointed, mitered top for an aggressive look• 32 mm (11/4”) diameter bar looks stout installed

CHROME DESCRIPTIONFOR 20 CHALLENGER MODELS0601-5589 25,5 cm (10”) chrome0601-5590 25,5 cm (10”) black0601-5591 30,5 cm (12”) chrome0601-5592 30,5 cm (12”) black

32 MM (11/4”) PRIMEAPE HANDLEBARS• A new twist on the conventional Ape; mitered top

with a traditional two-bend bottom• Direct bolt-on; drilled for internal wiring• Available in chrome or gloss black

PART # DESCRIPTIONFOR 20 CHALLENGER MODELS0601-5593 25,5 cm (10”) chrome0601-5594 25,5 cm (10”) gloss black0601-5595 30,5 cm (12”) chrome0601-5596 30,5 cm (12”) gloss black

0601-5594 0601-5595

0601-5589

0601-5592

13 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

MAGNUM SHIELDINGQuality matters! Magnum Shielding is recognized worldwide as the premier manufacturer of braided brake lines and control cables. Their Designer and XR style handlebar installation kits include everything needed for a control cable swap when installing a set of custom handlebars. No more mixing/ matching cables and brake lines! Everything you need is in one convenient kit. Plus all components are produced in-house to ensure the highest levels of quality, fit and finish.

DESCRIPTION

STERLING CHROMITE II 25,5 CM (10”) APES

STERLING CHROMITE II; 35,5 CM (12”-14”) APES

STERLING CHROMITE II; 43 CM (15”-17”) APES

BLACK PEARL 25,5 CM (10”) APES

BLACK PEARL; 35,5 CM (12”-14”) APES

BLACK PEARL; 43 CM (15”-17”) APES

For 08-12 FLHTCUSE CVO (w/ ABS) 0662-0738 0662-0736 0662-0737 0662-0743 0662-0741 0662-0742

For 10-12 FLHXSE CVO (w/ ABS) 0662-0738 0662-0736 0662-0737 0662-0743 0662-0741 0662-0742For 08 FLHRSE CVO (w/ ABS) 0662-0738 0662-0736 0662-0737 0662-0743 0662-0741 0662-0742For 12 FLTRXSE CVO (w/ ABS) - 0662-0739 0662-0740 - 0662-0744 0662-0745For 11 FLTRUSE CVO (w/ ABS) - 0662-0739 0662-0740 - 0662-0744 0662-0745For 09 FLTRSE CVO (w/ ABS) - 0662-0739 0662-0740 - 0662-0744 0662-0745

DESIGNER HANDLEBAR INSTALLATION KITS• The only complete kits with matching braided cables and DOT brake lines• Kits are available for ABS Harley-Davidson® motorcycles

with 25,5 cm to 43 cm (10” to 17”) ape hanger style handlebars • Kits include Throttle-By-Wire extensions, clutch cable or hydraulic clutch line, brake lines,

copper crush washers, hardware, and any necessary switch wiring or turn signal extension• All cables and brake lines feature either Sterling Chromite® II or Black Pearl

braid with highly polished chrome or black chrome-plated fittings• All cables are a low-effort, high-efficiency design that meets or exceeds

all OE specifications for fitment, construction, endurance• Kits for dual disc models include an all brazed manifold that eliminates

leaks, alignment problems and unattractive threaded connections

XR STAINLESS DOT HANDLEBAR INSTALLATION KITS • Magnum XR DOT Handlebar Installation Kits offer a great

fit and excellent quality at an economical price• XR DOT Handlebar Installation Kits are available for popular ABS Harley-Davidson®

motorcycles with 30,5 cm to 43 cm (12” to 17”) ape hanger style handlebars• Three color combinations to complement your bike: clear-coated stainless steel with

chrome fittings, black-coated with chrome fittings or black-coated with black fittings • All cables are a low-effort, high-efficiency design that meets or exceeds

all OE specifications for fitment, construction, endurance• Magnum XR DOT brake lines use an enhanced construction of heavy gauge stainless

steel embedded in tough abrasion-resistant nylon outer jacket for superior durability• The coating on cables and brake lines offers

exceptional protection for paint or chrome• Kits that include manifolds use an all-brazed construction

to ensure optimal OE fitment and appearance• Manifolds use -3 AN connections for an easy installation• Kits include Throttle-By-Wire extensions, clutch cable or XR hydraulic

clutch line, XR DOT brake lines, copper crush washers, hardware, fully terminated turn signal and switch wiring extensions

DESCRIPTION

STAINLESS W/ CHROME FITTINGS 30,5 CM - 35,5 CM (12”-14”)

STAINLESS W/ CHROME FITTINGS 38 CM - 43 CM (15”-17”)

BLACK W/ CHROME FITTINGS 30,5 CM - 35,5 CM (12”-14”)

BLACK W/ CHROME FITTINGS 38 CM - 43 CM (15”-17”)

BLACK W/ BLACK FITTINGS 30,5 CM - 35,5 CM (12”-14”)

BLACK W/ BLACK FITTINGS 38 CM - 43 CM (15”-17”)

08-12 FLHTCUSE, 10-12 FLHXSE, 08 FLHRSE (w/ ABS) 0662-0750 0662-0751 0662-0748 0662-0749 0662-0746 0662-0747

For 09 FLTRSE, 11 FLTRUSE, 12 FLTRXSE (w/ ABS) 0662-0756 0662-0757 0662-0754 0662-0755 0662-0752 0662-0753

0662-0738

0662-0741

0662-0750

0662-0755

14 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

COVINGTON’S CUSTOMSDress up Dresser with gorgeous CNC-machined billet aluminum accessories from Covington’s. Established in 1993, Covington’s Customs is a nationally recognized leader in the manufacture of high-quality custom motorcycle parts and accessories. Their carefully engineered parts add quality you can see and feel whenever you ride.

AIR CLEANER INSERT• CNC-machined billet aluminum construction• Mounting bolt included• Ripper style in gloss black finish

PART # DESCRIPTION

1014-0308For 99-16 OEM twin cam air cleaner (EXCEPT 16 Softail, 08-16 Dyna, 14-16 FLHT/ FLHR/ FLHX/ FLTRX)

DERBY COVERS• Includes mounting hardware• Ripper style with black finishNOTE: 07-18 applications (except 18 FLSB, 16-18 Dressers,

15 FLHTCUL/ FLHTKL) will require the use of gasket PART #s 0934-0289 or 0934-0788.

PART # DESCRIPTION

1107-0682For 16-20 Dressers, 16-20 HD FL TRIKE, and 15 FLHTCUL/ FLHTKL models

1107-0683 For 99-15 Dresser models (except FLHTCUL/ FLHTKL)

BILLET ALUMINUM HORN• CNC-machined from billet aluminum• Includes 12V 3-amp horn• Horn rating of 90-105 dB• Sold each• Ripper style in black finish

PART # FITS MODEL

2107-0312For all Big Twin, Bagger and XL models with engine mounted “Cowbell” style horn

MASTER CYLINDER COVERS• CNC-machined from billet aluminum• Includes new mounting hardware• Ripper style with gloss black finish

PART # DESCRIPTIONFRONT BRAKE MASTER CYLINDER COVERS0612-0478 For 13-20 FLHT/ FLHR/ FLTR/ FLHX models

0612-0479 For 13-20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLTRK and Screamin’ Eagle models

REAR BRAKE MASTER CYLINDER COVERS1731-0743 08-20 FLHT/ FLHR/ FLTR/ FLHX models

0612-0478

1731-0743

1107-0682

15 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

BRAKE PEDAL PAD• Replaces the stock rubber pad• CNC-machined from billet aluminum• Ripper style with black finish

PART # DESCRIPTION1610-0615 For 99-20 FLT/ FLHT/ FLHX/ FLHR models

BRAKE ARM• CNC-machined from billet aluminum• Ripper design with black finish

PART # DESCRIPTION

1610-0616For 14-20 FLHT/ FLHX/ FLHR/ FLTRX/ FLTRU/ FLTRK/HD FL Trike models

FORK BELLOWS• CNC-machined from billet aluminum• Ripper style, with black finish• Sold in pairsNOTE: When installing on FLST models or other models with a custom front

fender, check fender clearance before operating the motorcycle.

PART # DESCRIPTION0411-0188 For 99-13 FLHT/ FLHR/ FLTR models

0411-0189 For 14-20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLTRK and H-D FL TRIKE models

FOOTPEGS AND SHIFT PEG• Billet aluminum construction• Ripper style with gloss black powdercoat finish• Footpegs are sold in pairs; shift peg is sold eachNOTE: See page 578 of the 2021 Parts Europe FatBook for

an explanation of footpeg mount styles.

PART # DESCRIPTION1620-2304 Male mount footpegs1603-0376 Shift peg

0411-0188

0411-0189

1603-0376

1620-2304

16 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

CLUTCH AND BRAKE LEVERS• CNC-machined from 6061 billet aluminum with a

chrome-plated or black anodized finish• Finger indents for a comfortable grip• Uses stock mounting hardware• Sold each

PART # DESCRIPTIONFOR 17-21 SCOUT/ SCOUT SIXTY/ SCOUT BOBBERCLUTCH LEVERS0613-1940 Black0613-1941 Chrome

PART # DESCRIPTIONBRAKE LEVERS0614-1723 Black0614-1724 Chrome

0613-1940

0614-1724

SIX-PISTON DIFFERENTIAL BORE FRONT BRAKE CALIPERS • CNC-machined from billet aluminum• Differential bore for optimal and

consistent braking performance• Compatible with ABS brake systems• Designed and engineered to be extremely rigid

and perform consistently in all braking scenarios• Cooling fins are CNC-machined into each

side of the inner caliper to disperse heat• Available for 11,8” or 14” brake rotors

PART # DESCRIPTIONFOR 08-20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU, 18-20 SOFTAIL, 06-17 FLST, 06-17 FXD, 14-20 XL W/ 14” ROTORS1701-0674 Left caliper, blue1701-0677 Right caliper, blue1701-0675 Left caliper, gold1701-0678 Right caliper, gold1701-0676 Left caliper, red1701-0679 Right caliper, red1701-0680 Left caliper, titanium1701-0681 Right caliper, titanium

PART # DESCRIPTIONFOR 08-20 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU, 18-20 SOFTAIL, 06-17 FLST, 06-17 FXD, 14-20 XL W/ 11,8” ROTORS1701-0682 Left caliper, titanium1701-0683 Right caliper, titanium1701-0685 Left caliper, gold1701-0686 Right caliper, gold1701-0684 Left caliper, blue1701-0687 Right caliper, red

1701-0674 1701-0678

1701-0679 1701-0683

17 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

UNIBAR®

• Traditional OEM-style highway bars• Made from high-quality 11/4” high-tensile steel tubing• Easy installation with included hardware• Available in triple-chrome-plated or gloss black powdercoated finishNOTE: Not recommended for use with extended forward

controls or extended floorboards.

PART # DESCRIPTIONFOR 18-21 SOFTAIL (EXCEPT FXDRS)1624-0385 Triple-chrome-plated1624-0386 Gloss black powdercoated

1624-0385

1624-0386

ENGINE GUARD• Delivered with all required hardware and easy

instructions for perfect installation• 32 mm wide• Available in black finish

PART # DESCRIPTION0505-2229 For 14 Indian Chief models

FRAME SLIDER• Designed for maximum protection while maintaining visual appearance• Made of high-strength aluminum• Nylon coating will prevent most scratches• Available in black

PART # DESCRIPTION0505-2230 For 06 FXDB/I models

18 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2021

PROBEAM® LOW PROFILE LED TAILLIGHTS WITH BOTTOM WINDOW• Provides increased side visibility with five light

pipes that function as running lights• 25 separate LEDs act as full-contrast brake lights• Low-profile design protrudes only 51 mm (2”) from

the stock taillight baseplate• Available with red or smoke lens• Completely sealed unit• Plug-and-play• ECE approved

PART # DESCRIPTIONFOR 99-21 MODELS W/ SQUARE BACK TAILLIGHT (OEM PART #68245-03)2010-1409 Smoke lens2010-1410 Red lens

2010-1409

INTEGRATED TAILLIGHT HARNESS• Provides turn signal power to rear taillight assembly for compatibility

of any Custom Dynamics® or ProBEAM® integrated LED taillight• For all 99 and earlier Harley-Davidson models with integrated taillight assembly• Plug-and-play

PART # DESCRIPTION2120-1074 Integrated taillight harness

TAILLIGHT ADAPTER HARNESS• Adapter for installation of Custom Dynamics®

LED Squareback or Low Profile LED taillights• One harness required per taillight• Plug-and-play

PART # DESCRIPTION2050-0417 For 20-21 FLHTCUTGSE models (US models only)

LED LICENSE PLATE FRAME• Low-profile, sleek design• Illuminated with six bright-white LEDs• Measures 18,5 cm L x 11 cm W (73/16” x 41/4”)• Mounting holes, center-to-center: 146 mm x

71,5 mm (53/4” x 23/16”)• Comes in a gold finish• Mounting hardware included• Two-wire installation 109 cm (43”) leads

PART # DESCRIPTION2030-1595 LED license plate frame

LICENSE PLATE RELOCATION KIT• Direct bolt-on aluminum mount

installs using two mounting bolts used for the factory rear turn signal to anchor the license plate frame below the taillight

• No drilling required• Aluminum finish and mount• Use with or without turn signal bar

PART # DESCRIPTION

2030-1594For 91-08 FLHTC/ FLHT/ FLHTCU/ FLHTK, 91-08 FLHR/ FLHRC, 86-17 FLSTC, 93-96 FLSTN and 99-03 FLTR models

LED TAG BOLTZ• Offer super bright chip-on-board white LEDs for license plate illumination• Simple two-wire installation with 45,5 cm (18”) wire leads• M-6 x 1” thread• Fit all models with

12VDC negative ground systems

• Thread diameter is 0,232”• Thread length is 0,59”• Head diameter is 0,469”• Head height is 0,711”• Sold in pairs

PART # DESCRIPTION2030-1580 Black2030-1581 Chrome

2030-1580

2030-1581