View
229
Download
0
Category
Preview:
Citation preview
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
ⓒ 2012 Zalman Tech Co., Ltd.
CNPS9900DFDual Fans Ultra Quiet CPU Cooler
Sales Guide
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
CNPS9900 DFDual Fans Ultra Quiet CPU Cooler
Cross banding fin technologyTriple composite heatpipesDual fansBlue LED fansMirroring baseFits in mid case High compatibilityZM-STG2 provided
Q-MAX 300WATT
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
Cross Banding Fin TechnologyFront and rear airflow incident angles are designed in different directions. This cross banding fin technology produces cooling performance with minimum noise.
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
Triple Composite Heatpipes 3 composite heat pipes and pure copper cross banding fins quickly cools down the heat from the CPU.
About Composite Heatpipe 모세관 펌핑 성능을 가진 소결 금속 타입의 윅과 종전의 히트파이프 대비 50% 향상된 열전도율을 갖는 미세공정의 축방향 홈 구조를 가지고 있습니다 .
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
Cross banding ultra quiet powerful 120mm middle fan and 135mm rear fan produces top performance.
Dual Fans
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
BLUE LED FANSBeautiful blue LED dual fan
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
Mirroring BaseZalman’s unique sanding process provides excellent heat transfer ability.
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
Fits in Mid Case With height 160mm and width 180mm it fits in a variety of cases including mid case.
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
High compatibilityCompatible with Intel Socket 2011, AMD FM1 and most Intel, AMD platform.
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
ZM-STG2 High performance ZM-STG2M helps to maximize the heat transfer from CPU to CNPS9900 DF base allowing optimal cooling performance.
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
Components
Backplate Side Caps Allen Wrench
Gold Bolts(Socket 1366)
Silver Bolts(Socket 2011)
Silver Bolts(Sockets
1156/1155/775/AMD)
Nuts Loading Block
Double-sided Tape
Intel Clip AMD Clip Thermal Grease
ZM-STG2
User’s ManualY-Connect Cable
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
Dimensions 140(L) X 100(W) X 158(H)mm
Weight 900g
Material Copper(base & Fin)
Heat pipe Q’ty 3EA
Fin Q’ty Front 134EA, Rear 134EA
Fan 120mm Fan(Front), 135mm Fan(Center)
Fan Speed
Front120mm 1,000 rpm ±10%(2pin)
Center135mm 800~1,400 rpm ±10%(4pin)
Noise Level 19 - 27 dBA ±10%
Bearing Type Long Life Bearing
Control Method PWM Control, Auto Restart
Input Voltage 12V
Supports SocketsIntel Socket : LGA 2011/1366/1156/1155/775AMD Socket : FM1/AM3+/AM3/AM2+/AM2
Thermal Grease ZM-STG2
CNPS9900 DF SPEC.
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
M
ZM-STG2 비교 테스트
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
Is it better to remove the previously applied thermal grease and replace with fresh thermal grease when re-installing the cooler?
Yes. The heat transfer performance of thermal compounds may degrade over time. Please wipe off the previously used thermal compound and apply a fresh layer.
What CPUs are Supported?
All single, dual and quad core CPUs based on Intel socket LGA2011/1155/1156/775 and AMD socket FM1/AM3/AM2+/AM2 are supported.
Please address cautionary notices regarding CNPS10X Optima’s installation.
It is recommended to make the air flow out of the case through the back fan when installing. Particularly, for the case with air guide, make sure there is no interference between the cooler and the air guide before installing. While installing wear gloves to prevent any possible injury. After the installation, make sure there is no interference between Front Fan(120mm) and Middle Fan(135mm)wires. Keep out of the reach for children (do not eat the thermal grease), and if there is problem with the product, please notify the retailer.
What size cases can it be installed in?
The inner width of the case needs to be at least 160mm.
※ CNPS9900DF Dimension: 140(L) X 100(W) X 158(H)mm
Q&A
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
What is the maximum wattage it can handle when overclocking?
It can handle up to 300watts of heat, cooling it down quickly keeping the CPU stable.
What is the thermal resistance value of the CNPS9900 DF?
The CNPS9900 DF the thermal resistance is 0.072°C/W. * Note: this thermal resistance value was obtained through tests performed on a ‘dummy heater’ and may vary on different testing equipments and environments.
The CPU cooler’s base is smaller than the CPU. Will this affect the performance?
The CPU’s core is smaller than the CPU cooler’s base, and the IHS*(Integrated Heat Spreader) which covers the surface of the CPU is in place to protect the core. The CPU cooler’s base is larger than the CPU’s core, so it has no negative effect on performance.
* IHS (Integrated Heat Spreader) - The metal cover on top of the CPU, which is made of copper with nickel plating protects the core physically, spreads/dissipates heat and blocks electromagnetic waves.
Q&A
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
How much thermal grease should be applied for installation of CNPS9900 DF? The amount of thermal grease to be applied depends on the degree of flatness of the top of the CPU assembly (more specifically the flatness of the top of the IHS* which is the metallic cover placed over the CPU’s PCB). Generally, if the top of the CPU is uneven or not flat, more thermal grease should be applied than on a CPU that has an IHS with an even & flat top surface. For most situations, application of approximately 1/3 of the initially provided amount of thermal grease will be sufficient for the CNPS9900 DF. * IHS (Integrated Heat Spreader) The metal cover on top of the CPU, which is made of copper with nickel plating protects the core physically, spreads/dissipates heat and blocks electromagnetic waves.
What is an effective method for wiping off thermal compound from the top(IHS) of the CPU? A dry cloth with a bit of alcohol or acetone is effective. Please be cautious to prevent alcohol or acetone from contacting the motherboard.
Wouldn’t the motherboard warp due to the weight of the cooler? If the motherboard warps, would that cause any problems? If the cooler is properly installed as indicated in the User’s Manual, any warping of the motherboard caused by the tension of the cooler’s clip will be within a safe range for stable operation.
Where can I find motherboard compatibility information?
Motherboard compatibility information can be found in Zalman website.
In general, motherboards with the following CPU sockets are compatible.
Intel Sockets - 2011/1155/1156/775
AMD Sockets - FM1/AM3/AM2+/AM2
Q&A
ⓒ ⓒ 2012 Zalman Tech Co., Ltd. 2012 Zalman Tech Co., Ltd.
CNPS9900 DF
Thank You
Recommended