View
9
Download
0
Category
Preview:
Citation preview
166 www.fiorinigroup.it
AquamaticInstantaneous DHW production unit with integrated storage tank
The Aquamatic is an innovative “plug and play” system, which unites both the functions of an inertial tank and an instantaneous DHW production unit in one system. The Aquamatic is elegant and has an original design.
Suitable for heating installations powered by one or more energy sources (traditional water heater, heat pump, biomass water heat-er, solar thermal…). The device guarantees the inertial storage of technical water and at the same time, the instantaneous produc-tion of domestic hot water at the temperature set by the user and with limited chalk formation. The thermal exchange is carried out through the AISI 316 stainless steel plate heat exchanger, which guarantees hygiene and elevated performances. The heat ex-changer is integrated with the storage tank from which it takes en-ergy. The system consists of all components necessary for func-tioning and can be monitored through a control unit with graphic display.
The heart of the Aquamatic system is the particular electronic regulation, developed by Fiorini, which guarantees that the DHW temperature set through the modulation of the primary circuit flow will be reached and maintained. In this way, there is:
✔ A high thermal increase on the primary circuit in order to op-timize the efficiency of the generator (heat pump; solar thermal; biomass, etc.)✔ Precise and trustworthy regulation
Thanks to the highly efficient thermal exchange system the unitis the ideal solution for devices with single or double use in residen-tial or commercial installations that are supplied by a heat pump and/or solar panels and that use a low temperature thermal stor-age tank (50-55°C).
www.fiorinigroup.it 167
1
3
7
4
6
5
2
FAS
T H
EA
TE
RA
ND
FWS
AquamaticMain features
✔ Highly efficient heat exchange system with discontinuous or low temperature generator✔ Cheap and user-friendly✔ Efficient even with a low flow rate (min 2 l/min)✔ Highly hygienic with antilegionella function✔ Very precise temperature control✔ Highly efficient circulation pump (in accordance with the 2005/32 CE directive) and electronic management of the number of runs.✔ Graphic display which indicated the temperature in the device and the power✔ Saves space compared to the solution with heat exchanger + storage tank✔ Easy installation, Plug and Play system✔ High density rigid polyurethane insulation. Low thermal loss, energy class B
✔ Monobloc structure with original, captivating and esthetical design, which make the device like a piece of furniture. ✔ All-in integration with other generators (for the version that have one)✔ Possibility to integrate and manage accessories in kit:Integrative electrical resistorDomestic recirculation pumpInstallation “in series”Mixing valve for temperature control on the primary circuit. Deviation valve for stratification✔ Additional inertial tank for installation;✔ integrated solar unit✔ Connectivity (accessory in kit):Possibility to check and monitor the system via internet✔ Possibility to communicate with monitoring systems with the Modbus protocol
1 Storage tank
2Coil(SOLAR and PLUS versions)
3 DHW exchanger
4 flow/temp gauge
5 electric board
6 electronic regulator
7 circulation pump
168 www.fiorinigroup.it
Available versions
The AQUAMATIC system is available with three different storage capacities and in three different versions. The versions differ in the presence of a second heat exchanger for additional sources and in the possibility of managing the additional heat source through an electronic pump and the specially programmed software.
Aquamatic: tank supplied with a single energy source. Equipped with plate heat exchanger for instantaneous DHW production, high-efficiency circulator and elec-tronic board
Aquamatic Plus: tank with additional coil for adding an integrative heat source
Aquamatic Solar:Tank for use and management of an integrative heat source (solar thermal, water heater, etc.); next to an ad-ditional coil, there is also a circulator and control software for managing the integrative source.
Next to those three devices, an integrative resistor is also available, which can meet the highest heat require-ments.
The AQUAMATIC is delivered packed in a cardboard box on a pallet.It has an electric cable with SHUCO plug, length 1.5 m.
code descriptionpump
primaryexchanger
primaryelectronic
control exchanger integrative
recirculation pump integr.
842030104X AQUAMATIC 200 ✔ ✔ ✔
842030105X AQUAMATIC 300 ✔ ✔ ✔
842030106X AQUAMATIC 500 ✔ ✔ ✔
842030107X AQUAMATIC “Plus” 300 ✔ ✔ ✔ ✔
842030108X AQUAMATIC “Plus” 500 ✔ ✔ ✔ ✔
842030109X AQUAMATIC “Solar” 300 ✔ ✔ ✔ ✔ ✔
842030110X AQUAMATIC “Solar” 500 ✔ ✔ ✔ ✔ ✔
www.fiorinigroup.it 169
FAS
T H
EA
TE
RA
ND
FWS
Technical information
*Working conditions in accordance with EN 16417 (DHW 42°C, tank 50°C)**Working conditions in accordance with UE N. 812/2013 and N.814/2013 (ambient air 20°C, tank 65°C)
AQUAMATIC
200 300 500
Electrical supply V/Ph/Hz 230/1/50
Absorbed power min/max W 25/75
Absorbed current min/max A 0,14/0,53
Absorbed power min/max Solar version W 27/127
Absorbed current min/max Solar version A 0,18/1,05
Min DHW flow rate at start-up l/min 2
Max DHW flow rate l/min 35
Max operating pressure bar 6
Max operating temperature °C 95
Capacity of the tank l 199 290 480
Deliverable flow rate* l/m 18,5 18,5 18,5
Deliverable liters* l 153 214 337
Empty weight kg 75 89 116
Empty weight Plus version kg - 96 131
Empty weight Solar version kg - 101 136
Surface area Integr Heat exchanger (Plus and Solar versions)
m2 - 1,4 1,9
Sound pressure at 1 m dB(A) 25
Heat loss ** W 59 68 80
Energy class B B B
Electronic regulation of the pump velocity ●
Graphic display ●
Settings for DHW temperature ●
Possibility to set antilegionella treatments ●
170 www.fiorinigroup.it
Prestazioni AQUAMATIC
Prestazioni AQUAMATIC
0 5 10 15 20 25 30 35 40
30
35
40
45
50
55
60
65
T out 40 C T out 42 C T out 45 C T out 48 C l/m
Performance Aquamatic
Quantity of domestic water produced in l/m with different storage temperatures and different outlet temper-atures
Deliverable DHW flow in function of the storage temperature fluctuations and the various outlet temperatures (can be set as setpoint for domestic hot water)Inlet temperature domestic 10°C
For example, if Taccumulo =52°CAnd TDHW =45°C, the AQUAMATIC guarantees a flow of approximately 14 l/minAnd TDHW = 42°C, the AQUAMATIC guarantees a flow of approximately 26 l/min
Pri
mar
y te
mp
era
ture
°C
www.fiorinigroup.it 171
45 50 55 60 65 70 75 80
100
200
300
400
500
600
700
45 50 55 60 65 70 75 80
100
200
300
400
500
600
700
800
45 50 55 60 65 70 75 80
150
250
350
450
550
650
750
850
950
Aquamatc 200 Aquamatc 300 aquamatc 500
°C
°C
°C
ll
l
FAS
T H
EA
TE
RA
ND
FWS
For example with an AQUAMATIC of 300 l with a 12 kW heat pump
If TTANK = 52 °C, the AQUAMATIC 300 guarantees approximately 330 liters of DHW at 42°C
If TTANK = 60 °C, the AQUAMATIC 300 guarantees approximately 380 liters of DHW at 42°C
Performance Aquamatic
Quantity of domestic water pro-duced (in liter) for the different tank capacities, with outlet tem-perature at 42°C and generator in function.
The graphic show the variation in the quantity of DHW produced in function of the various storage temperatures upon the variation of the power emitted by the gen-erator.
Generator 8 kW
Generator 12 kW
Generator 16 kW
172 www.fiorinigroup.it
0 5 10 15 20 25 30 35 40 45
0
5
10
15
20
25
30
35
40
45
Aquamatic 300 serpentino 1,4 mq aquamatic 500 serpentino da 1,9 mq
0
1
2
3
4
5
6
7
8
9
0 250 500 750 1000 1250 1500 1750 2000
Aquama1c 300 perdita di carico serpen1no in m.c.a.
Aquama1c 500 perdita di carico serpen1no in m.c.a.
Curva circolatore solare
Performance Aquamatic
Output in kW of the additional heat exchanger in fucntion of the variation of the value ΔT between the tem-perature of the integrative source and the storage temperatore.Only for AQUAMATIC PLUS and AQUAMATIC SOLAR.
For example, if Taverage in tank = 30°CSuppose the integrative coil is supplied with water at a temperature of 60°C (inlet) and that water cools to 40°C (outlet).We can consider an average temperature on the integrative circuit of 50°C.As such, we can refer to an indicative average DT of 50-30 = 20 KIn this case the performance of the additional heat exchangers would be:AQUAMATIC 300: 15 kW on averageAQUAMATIC 500: 20 kW on average
ΔT : temperature difference between the average temperatures in the primary circuit (coil) and secondary circuit (tank).
Ou
tpu
t in
kW
of
the
ad
dit
ion
al h
eat
exc
han
ge
r
Pre
ssu
re lo
ssP
reva
len
ce (m
ca)
Pressure loss in integrative coils and characteristic graphic of solar circulator
AQUAMATIC 300
AQUAMATIC 500
SOLAR PUMP
AQUAMATIC 300 coil 1,4 m2 AQUAMATIC 500 coil 1,9 m2
Water flow(liters/h)
www.fiorinigroup.it 173
FAS
T H
EA
TE
RA
ND
FWS
description A B C D E F G H I L M N O P Q R
AQUAMATIC 200 710 1315 255 - 405 525 - 780 225 - 517,5 - 780 915 970 629
AQUAMATIC 300 710 1690 255 - 405 525 - 1145 225 - 705 - 1145 1190 1345 975
AQUAMATIC 500 850 1740 280 430 580 683 1030 1180 280 430 730 1030 1180 1340 1395 880
N° description AQUAMATIC 200 AQUAMATIC 300 AQUAMATIC 500
1 Inlet/outlet domestic circuit 3/4” 3/4” 3/4”
2 Inlet/outlet primary circuit 1” 1” 1”1/4
3 Inlet/outlet auxiliary circuit - - 1”1/4
6 Electrical resistor 1”1/2 1”1/2 1”1/2
7 Inlet/outlet device 1” 1” 1”1/4
8 Inlet/outlet auxiliary device - - 1”1/4
9 Coupling kit with deviation valve for stratification 1” 1” 1”1/4
10 Inlet resistor cable GUAINA D. 20 GUAINA D. 20 GUAINA D. 20
11 Inlet probe 1/2” 1/2” 1/2”
Dimensions Aquamatic
Coupling chart
Heights chart
174 www.fiorinigroup.it
description A B C D E F G H I L M N O P Q R S T U
AQUAMATIC "PLUS" 300 710 1690 355 / 785 905 / 1155 225 / 705 / 1155 1290 1345 255 675 465 1005
AQUAMATIC “PLUS” 500 850 1740 380 480 860 945 1030 1180 280 430 730 1030 1180 1340 1395 280 760 560 880
N° description AQUAMATIC 300 AQUAMATIC 500
1 Inlet/outlet domestic circuit 3/4” 3/4”
2 Inlet/outlet primary circuit 1” 1”1/4
3 Inlet/outlet auxiliary circuit / 1”1/4
4 Temperature probe 1/2” 1/2”
5 Inlet/outlet solar circuit 1” 1”
6 Electrical resistor 1”1/2 1”1/2
7 Inlet/outlet device 1” 1”1/4
8 Inlet/outlet auxiliary device / 1”1/4
9 Coupling kit with deviation valve for stratification 1” 1”1/4
10 Inlet resistor cable GUAINA D. 20 GUAINA D. 20
11 Inlet probe 1/2” 1/2”
Dimensions Aquamatic Plus
Coupling chart
Heights chart
www.fiorinigroup.it 175
FAS
T H
EA
TE
RA
ND
FWS
Dimensions Aquamatic Solar
Coupling chart
Heights chart
description A B C D E F G H I L M N O P Q R S T U
AQUAMATIC "Solar" 300 710 1690 255 / 695 815 / 1155 225 / 705 / 1155 1290 1345 1329 584 395 1005
AQUAMATIC “Solar” 500 850 1740 280 430 788 883 1030 1180 280 430 730 1030 1180 1340 1395 1379 688 530 880
N° description AQUAMATIC 300 AQUAMATIC 500
1 Inlet/outlet domestic circuit 3/4” 3/4”
2 Inlet/outlet primary circuit 1” 1”1/4
3 Inlet/outlet auxiliary circuit / 1”1/4
4 Temperature probe 1/2” 1/2”
5 Inlet/outlet solar circuit 1” 1”
6 Electrical resistor 1”1/2 1”1/2
7 Inlet/outlet device 1” 1”1/4
8 Inlet/outlet auxiliary device / 1”1/4
9 Coupling kit with deviation valve for stratification 1” 1”1/4
10 Inlet resistor cable GUAINA D. 20 GUAINA D. 20
11 Inlet probe 1/2” 1/2”
176 www.fiorinigroup.it
1
2
3
4 4 2
87 11
4
4
5
9
76
10 10
4
Description components
1 Filter
2 Manometer
3 Safety valve
4 Ball valve
5 Deviation valve stratification (accessory)
6 expansion vessel
7 pump
8 mixing valve device low temperature.
9 filling valve
10 discharge
11 radiant system
Installation chart Aquamatic
www.fiorinigroup.it 177
1
23
3
4 4
4
22
8
7 11
12
4
4
4
9
5
9
7
7
6
6
10
10
10
4
FAS
T H
EA
TE
RA
ND
FWS
Description components
1 Filter
2 Manometer
3 Safety valve
4 Ball valve
5 Deviation valve stratification (accessory)
6 expansion vessel
7 pump
8 mixing valve device low temperature.
9 filling valve
10 discharge
11 radiant system
12 closed fireplace or thermostove
Installation chart Aquamatic PlusExample 1
178 www.fiorinigroup.it
1
23
4 4
4
2
14
8
7 11
12
13
4
4
4
5
9
7 6
610
10
10
4
Installation chart Aquamatic Plus Example 2
Description components
1 Filter
2 Manometer
3 Safety valve
4 Ball valve
5 Deviation valve stratification (accessory)
6 expansion vessel
7 pump
8 mixing valve device low temperature.
9 filling valve
10 discharge
11 radiant system
12 solar collector
13 vent
14 solar station
www.fiorinigroup.it 179
1
23
3
4
4
4 2
2
8
11
12
13
4
4
4
9
5
9
7
7
6
6
10 10
10
4
FAS
T H
EA
TE
RA
ND
FWS
Installation chart Aquamatic Solar
Description components
1 Filter
2 Manometer
3 Safety valve
4 Ball valve
5 Deviation valve stratification (accessory)
6 expansion vessel
7 pump
8 mixing valve device low temperature.
9 filling valve
10 discharge
11 radiant system
12 solar collector
13 vent
180 www.fiorinigroup.it
Accessories on demand
Several kits with accessories that can be connected to the AQUAMATIC are available.Some of those can be supplied already assembled in our factory.
Kit Electrical Resistor The kit with an electrical resistor (integrated) guarantees the a constant storage temperature, even in case of insufficient energy supply by the primary heat source. The resistor can be managed directly by the Aquamatic control unit, simply by activating it through the display.
The kit can be assembled in our factory or supplied after delivery.
It contains:✔ 1200 W single-phased 230 V electrical resistor with regulation thermostate✔ fuses and wiring for integration in the electrical switchboard
NB The AQUAMATIC has a small channel through the insulation of the tank in order to pass the cable for con-necting the resistor to the electronic switchboard.
RIF Description components
1 Electrical resistor
2 Resistor cable
3 Inlet channel for cable
4 Outlet channel for cable
5 Cable gland for fixing the cable
6 Fuse holder and precabled relay
www.fiorinigroup.it 181
2
1
43
AB
A
B
5
FAS
T H
EA
TE
RA
ND
FWS
Functional chart
1 Flowmeter
2 Domestic plate heat exchanger
3 Primary mixing valve
4 Pump
5 Tank
Outlet hot water Inlet cold water
Kit mixing valve on primary circuit
The kit with mixing valve (integrated) makes it possible to regulate the inlet temperature of the domestic heat exchanger. In this way, especially in installations that can reach high temperatures in the primary circuit, the precision of the regulation of the production unit improves. This leads to a larger comfort and reduces the chalk formation in the domestic circuit. We recommend the use of this device when the temperature in the primary circuit teaches values higher than 60°C.
The kit can either be pre-assembled in our factory or supplied later on.
It contains:✔ DN20 three way mixing valve✔ Servo drive 24Vac/dc Signal 0.10 V✔ kit with tubes for installing the kit to the top part of the AQUAMATIC✔ temperature probe✔ Pre-cabled gudgeon pin for connection to the electric switchboard
182 www.fiorinigroup.it
Kit for connecting the Aquamatic in series
The kit for connecting the Aquamatic in series is the solution for all applications in which the demand for DHW is highly variable.
In this way, it is possible to connect up to 5 instantaneous production units and guarantee a DHW production of 2l/min up to more than 120 l/min*.The electronic control units of every instantaneous production unit are able to communicate with each other (setting in the set-up menu). The electronics decides how many and which production unit have to be started up in function of the user conditions.
*Conditions of reference TSTORAGE TANK = 55°C TDHW = 10–45°C
Advantages and benefits:✔ Trustworthiness. Thanks to the self-diagnosis by the control unit, in case of malfunctioning of a production unit, the device is automatically deactivated and another production unit is started up. In this way, the continu-ous production of DHW is guaranteed. ✔ The regulation of the temperature is even more precise. The regulation makes it possible to activate the right number of production units based on the required flow and temperature of the DHW. In this way, every pro-duction unit always runs on the conditions closest to the nominal conditions, which improves the efficiency and precision of the regulation. ✔ The system with several production units connected in series can be expanded by adding other units (also later).✔ Possibility to execute the programmed maintenance on the production units without interrupting the DHW production. ✔ Every production unit runs for an equal number of hours, which guarantees a longer life span of the system.
Contains:✔ DN20 two-way zone valve✔ Three point servo drive 230 V✔ kit with connections
www.fiorinigroup.it 183
FAS
T H
EA
TE
RA
ND
FWS
Kit External deviation valve for stratification
The kit with external deviation valve makes it possible to take the water for the return to the heat pump from the lower parts of the tanks instead of the middle in function of the temperature difference between the two zones in the tank. In this way the temperature of the water that returns to the heat pump makes it possible to produce hot wa-ter at a higher temperature than the storage temperature. This maximizes the efficiency of the entire heating installation.
N.B. In case of connection in series, you should provide a deviation valve kit for every AQUAMATIC.
Contains:✔ DN32 three-way valve✔ On/off servo drive 230V
RIF Description
1 Manometer
2 Safety valve
3 Ball valve
4 Deviation kit
5 Expansion vessel
6 Recirculation pump (source)
184 www.fiorinigroup.it
Kit serial port RS485 Modbus Makes it possible to communicate with the supervision systems through the Modbus protocol
Kit web (remote control)Makes it possible to check and monitor the device via internet
Recirculation kit
The recirculation kit makes it possible to check the pump of the domestic recirculation circuit (circulator not supplied). Possible settings:
✔ Programming the recirculation in time slots✔ Programming the recirculation based on the temperature of the recirculation ring.✔ Programming the recirculation based on a combinations of the two above-mentioned settings✔ Recirculation pump always running.The kit is supplied separately and not assembled.
It contains:✔ Temperature probe to be put on the recirculation ring✔ Instructions
Recirculation pumpThe recirculation pump is not supplied with the kit because the device has to be selected based on the spe-cifics of the installation. However, because it is controlled by the regulator of the Aquamatic group, it has to have the following features✔ Power supply 230V/50hz/1ph✔ Max absorption 200 W
RIF Description
1 safety valve
2 expansion vessel
3 ball valve
4 pump
5 non-return valve
6 bt4 recirculation probe
www.fiorinigroup.it 185
FAS
T H
EA
TE
RA
ND
FWS
Solar unit without pump forAQUAMATIC SOLAR
Solar unit with double tube to couple with the AQUAMATIC SOLAR when a pre-assembled solar station is needed that integrates and completes the functions already present in the AQUAMATIC SOLAR.
The solar unit with double tube, completely assembled and tested, consists of:
Return circuit:✔ Flow meter and regulator with couplings for the filling and emptying of the installation✔ Ball valve with non-return valve which can be excluded by turning the handle with 45° (useful in the filling phase of the installation)✔ 6 bar safety valve with manometer Ø50 mm 0-10 bar and discharge outlet ¾”F✔ coupling for expansion vessel ¾”M✔ Thermometer 0-120°C
Flow circuit:✔ Ball valve with non-return valve which can be excluded by turning the handle with 45° (useful in the filling phase of the installation)✔ Thermometer 0-120°C✔ Brass deaerator with manual vent valve✔ Connecting hose and coupling
186 www.fiorinigroup.it
CD B
E
F
G
1
2
6
5
4
3
CD B
E
F
G
1
2
6
5
4
3
A tank that can be put onder the AQUAMATIC when you need an inertial flywheel dedicated exclusively to the heating installation of cool water installation. Reccommended in all case in which you have a heat pump as thermal source. Its installation makes it possible for the heat pump to operate at a low temperature when it has to reach the thermal demand of the installation. In this way the operation at high temperature is limited to the production of domestic hot water. Moreover, the tank serves as a thermal flywheel in summer mode in order to guarantee an optimal modulation of the heat pump.
✔ Energetic efficiency✔ Easy installation✔ Does not take a lot of space✔ Same design as the AQUAMATIC
In carbon steel without internal treatments of the surface area, insulated with 30 mm thick rigid polyurethane, externally covered in thick colour-ed PVC. Two available capacities in function of the size of the select-ed AQUAMATIC. Supplied with manual air vent valve and coupling for probe pit.
✔ Material: carbon steel ✔ insulation: 30 mm thick rigid foam✔ external covering: coloured PVC
User limitationsMin temperature -10 °C Max temperature 95 °C Max pressure 3 bar
Accessory – storage tank for installation
Legend
Chart with dimensions and couplings
Cod. Capacity Ø B C D E F G 1 2 3 4 5 6
817010158X 66 710 260 75 110 75 130 205 1” 1” 1/2” 1” 1” 1/4”
817010159X 93 850 260 75 110 75 130 205 1”1/4 1”1/4 1/2” 1”1/4 1”1/4 1”1/4
Rif. Description
1 flow heat pump
2 return heat pump
3 probe
4 return installation
5 flow installation
6 vent
www.fiorinigroup.it 187
13
2
9
10
5
8
3 42
10
6
5
5
5
5 56
1
7
14
9
11
12
13
2
9
10
5
8
3 42
10
6
5
5
5
5 56
1
510
8
15
9
7
6
4
7
5
14
9
11
12
FAS
T H
EA
TE
RA
ND
FWS
Installation chart accessory
Legend
Rif. Description
1 Heat pump
2 pump
3 deviation valve domestic/installation
4 vent
5 ball valve
6 fill-up valve
7 safety valve
8 expansion vessel
Rif. Description
9 discharge valve
10 Manometer
11 Aquamatic
12 inertial puffer
13 mixing valve installation low temperature
14 radiant installation
15 solar collector
188 www.fiorinigroup.it
Codes
Packed
code description pricedimensions
cmweight
kg
842030104X AQUAMATIC 200
842030105X AQUAMATIC 300
842030106X AQUAMATIC 500
Packed
code description pricedimensions
cmweight
kg
842030107X AQUAMATIC “Plus” 300
842030108X AQUAMATIC “Plus” 500
Packed
code description pricedimensions
cmweight
kg
842030109X AQUAMATIC “Solar” 300
842030110X AQUAMATIC “Solar” 500
code description price
829000209X Kit resistor
842030116X Kit internal primary mixing valve
842030115X Kit in series
842030120X Kit external deviation valve for stratification
842030119X Kit recirculation pump
817010158X Accessory puffer 70 liters AQUAMATIC 200/300
817010159X Accessory puffer 90 liters AQUAMATIC 500
838110069X Solar station no pump
452010010 Kit serial port RS485
452010006 Kit web (remote control)
AQUAMATIC
Kit accessori
Recommended