View
217
Download
0
Category
Preview:
Citation preview
1
LieferprogrammProduct range
B A LV E R Z I N NC O BA R
32
The motto “forging new paths” is for Josef and Gregor Jost a good descrip-tion of the relaunch of the Balver Zinn and Cobar brands. Whether in surface protection or electronics, for over a decade the solder and anode specialist Balver Zinn have been pursuing a strategy with high-visibility advertising and PR, to make sure their products and services are presented with the proper perspective, drawing attention with fascinating themes, eye-catching ads, brochures and exhibition stands. The raw product was improved not just technical aspects, but with emotion. Feedback in the market has been very positive. The acquisition of Cobar, a company with an image and a presence of its own, was used as an opportunity to enhance the brand with an up-to-the-minute relaunch. Although Balver Zinn and Cobar remain independent companies, we want to make it clear to the users of our products through the joint presentation of our brands that our two companies now belong together.
Der Erfolg ist Ansporn für die ZukunftSuccess is motivation for the future
With kind regardsJosef and Gregor Jost
HerzlichstIhr Josef und Gregor Jost
Gregor Jost Josef Jost
3
„Neue Wege gehen“ – unter diesem Motto beschreiben wir, Josef und Gregor Jost, den Relaunch der Marken Balver Zinn und Cobar. Ob in der Oberflächen-beschichtung oder der Elektronik, der Lot- und Anodenspezialist Balver Zinn sorgt schon seit über einem Jahrzehnt mit aufmerksamkeitsstarker Werbung und Öffentlichkeitsarbeit dafür, dass Produkte und Services des Unternehmens zielgerichtet ins rechte Licht gerückt werden. Wir haben mit starken Themen, Anzeigen, Prospekten und Messeständen auf uns aufmerksam gemacht. Das nackte Produkt wurde nicht technisch, sondern mit Emotionen aufgeladen. Dies hat für ein gutes Feedback im Markt gesorgt. Der Zukauf der Firma Cobar, die ein eigenes Erscheinungsbild und einen eigenen Auftritt im Markt hatte, wurde zum Anlass genommen, das Markenbild einem zeitgemäßen Relaunch zu unter-ziehen. Balver Zinn und Cobar werden als eigenständige Unternehmen weiter-geführt, jedoch sollen für den Nutzer der Produkte und beim Auftritt der beiden Marken klar zu erkennen sein, dass diese Unternehmen zusammengehören.
54
Standortelocations
GeschichteHistory
Die Balver Zinn Josef Jost GmbH & Co. KG mit Sitz im sauerländi-schen Balve ist einer der führenden Hersteller von Loten und hochwertigen Anoden der unterschiedlichsten Legierungen sowie von Spezialdrähten für die Elektronikindustrie und Oberflächenveredelung. Insbesondere bleifreie Produkte für die Elektronikindustrie gehören zu den Kernkompetenzen des Unternehmens. Schon seit Ende des 20. Jahrhunderts ist das Familien-unternehmen in der Metallbranche tätig. 1976 erfolgte die Eintragung ins Handelsregister. Die Firma wird heute in dritter Generation von Josef und Gregor Jost geleitet.
Die Geschäftstätigkeit des über 100 Mitarbeiter starken Unternehmens um-fasst den weltweiten Vertrieb einer umfangreichen Produktpalette.
The head office of Balver Zinn Josef Jost GmbH & Co. KG is situated in Balve in a region in Germany known as „Sauerland.“ The company is a leading manufacturer of solders, high-quality anodes, alloys and wires for the elec-tronics industry and surface protection applications. Lead free products for the electronics industry are one of the core competences of the company.
The family owned and operated company became active in the metal and metalworking industry in the late 20th century. In 1976, the company was entered into the Commercial Registry. Today, third-generation family mem-bers, Josef and Gregor Jost, manage the company, which employs more than 100 staff globally, including global sales and distribution.
1976Bau einer Produktionshalle und eines Bürogebäudes in BalveConstruction of a production facility and an office building in Balve
1986–1987Bau der Produktionshalle „Zinkgießerei“ und der Verwaltung in Balve-GarbeckConstruction of the production facility „Zinkgießerei“ and the administration in Balve-Garbeck
2000Erstes zertifiziertes Umweltmanagementsystem nach DIN 14001First certified environmental management system to DIN 14001
2007Fusion Balver Zinn / CobarBalver Zinn acquires Cobar
2011Zertifiziertes IPC Trainingscenter, LötkompetenzzentrumNeue Marken: Aquasol, Intrusol, Solar, AnokraftCertified IPC training center, brazing training centerNew brands: Aquasol, Intrusol, Solar, Anokraft
2013Eröffnung Balver Zinn Analysis, DienstleistungscenterOpening of Balver Zinn Analysis, Servicecenter
Absatz-MarktSalespresence
BalverZinn-Group
Nihon
54
Balve-Garbeck GermanyZinkgießerei Zinc foundryDraht- und Presswerk Wire- and press plant
Zinn Recycling Tin recycling
Balve GermanyZinn Recycling Tin recyclingLotpaste- und Flussmittelproduktion Solder paste- and flux productionLabor Laboratory
F&E Abteilung R&D department
Breda NetherlandsLotpaste- und Flussmittelproduktion Solder paste- and flux productionLabor Laboratory
USA USACobar Solder Products Inc. Cobar Solder Products Inc.Vertrieb Sales office
76
AnodenAnodes
26 — 27
Soluble anodesZinc anodes
Lösliche AnodenZinkanoden
AnodenAnodes
26 — 27
FlussmittelFlux
24 — 25
VOCVOC-freeLow VOC
VOCVOC-freeLow VOC
24 — 25
NetzwerkNetwork
32
NetzwerkNetwork
Unser LieferprogrammOur product range
LoteAlloys8 — 17
LotdrähteSolder wire
22 — 23
LotpastenSolder paste
18 — 21
Bleifreie LoteBleihaltige LoteBarrenPelletsMassivdrähte
Lead free solderLead containing solderBarsPelletsSolid wires
Bleifreie LotpastenBleihaltige LotpastenZum DruckenZum Dispensen
Bleifreie LotdrähteBleihaltige LotdrähteVerschiedene Flussmittel
Lead free solder pastesLead containing solder pastesFor PrintingFor Dispensing
Lead free solder wireLead containing solder wireDifferent fl ux types
22 — 23
AlloysSSP
28
OpferanodenSacrifi cial
anodes29
AnalyseAnalysis
30
AnalyseAnalysis
30
SSP
28
OpferanodenSacrifi cial
anodes29
SchulungenTraining
31
Schulungen
WebAccessOnline Solder Sample Monitor
ReinigungsmittelAbziehbare Masken
EntlötlitzenBalver Tip
Flussmittelgel
CleanerPeelable mask
Desoldering braidBalver tipTacky fl ux
OpferanodenVerschiedene Formen
Sacrifi cal anodesVarious sizes
AnalysenserviceLabordienstleistungen
Analysis servicesLaboratory services
Qualifi zierte Trainer für:IPC - Schulungen
HandlötschulungenProzesschulungen
Qualifi ed trainers for:IPC training
Hand soldering trainingProcess training
Worldwide NetworkDas weltweite Netzwerk
98
LoteAlloys
Application Lead free process Leaded process
High reliabilityAutomotive applications
Moderate reliabilityIndustrial applications
Standard reliabilityConsumer electronics
SN100C®SN100CS+
SnCu0.7NiGe
High rel. alloyLow price
Less copperdessolution
SCA
SnCu0.7Ag0.3
Refi ll for wavesoldering
SN97C(SAC305)
SnAg3.0Cu0.5
Commodity forindustrial apps
SN96C(SAC387)
SnAg3.8Cu0.7
Commodity forindustrial apps
SCAN-Ge
SnCuAgNiGe
Commodity forindustrial apps
Sn63Pb37
The standardleaded alloy
Proposal Advantage Disadvantage
Wave and selective solderingSN100C®SN100CS+
Favourable priceLow dross formation
No silver contentShiny solder joints
Reliability
Melting temperature 227°C
Wave and selective soldering if silver is needed
SN97C (SAC305)Melting range 217- 219°C
Well known alloy
High price Dull solder joints low ductility
Shrinkage cracks
Wave and selective soldering if silver is needed
SCAN-GeLow SAC alloys
Combination of SN100C® andSAC-alloys with different silver contents
Low dross formationDull solder joints
Reliability
Price at high silver contents
Lote
Allo
ys
1110
SN100CLSN100CLeSN100CLSSN100CLeS
Legierung SnCu0.7NiGeSchmelzpunkt 227°CDichte 7.4 g/cm3
· weltweit bekannt und eingesetzt· günstiger Preis· geringe Krätzebildung· glänzende Lötstelle· Zuverlässigkeit· Duktilität
Alloy SnCu0.7NiGeMelting temperature 227°CDensity 7.4 g/cm3
· well known alloy· low price· low dross formation· shiny solder joints· reliability· ductility
Bleifreie Lote ohne Silber
Lead-free Alloys without silver
Bleifreie HAL – Oberfl äche mit SN100CLLead free HASL – fi nish SN100CL(Bildquelle / Source: Hubert Brautmeier)
Glänzende Lötstelle, vergleichbar mit SnPbShiny solder joints, comparable SnPb
SN100C®
SN100CeSN100CS+SN100CeS+
Legierung SnCu0.7NiGeSchmelzpunkt 227°CDichte 7.4 g/cm3
· weniger Krätzebildung· bessere Benetzung· besseres Fließverhalten· geringere Oberfl ächenspannung· Zuverlässigkeit· Duktilität
Alloy SnCu0.7NiGeMelting temperature 227°CDensity 7.4 g/cm3
· low dross formation· improved wetting· good fl ow ability· reduced surface tension· reliability· ductility
Lote
Allo
ys
1312
Bleifreie Lote mit Silber
Lead-free Alloys with silver
SN96C (SAC387)
SnAg3.8Cu0.7
Legierung SnAg3.8Cu0.7Schmelzpunkt 217°CDichte 7.5 g/m3
· Eutektikum· Schmelztemperatur
Alloy SnAg3.8Cu0.7Melting temperature 217°CDensity 7.5 g/m3
· eutectic· melting temperature
SN97CSnAg3.0Cu0.5
SN97CeSnAg3.0
SN96CSnAg3.8Cu0.7
SN96CeSnAg3.8
Sn63Pb37
Meltingrange°C 217- 219 221 217 221 183
Densityg/cm3 7.5 7.5 7.5 7.5 8.4
SN97C (SAC305)
SnAg3.0Cu0.5
Legierung SnAg3.0Cu0.5Schmelzbereich 217- 219°CDichte 7.5 g/m3
· bekannte Legierung· von IPC untersucht· Schmelzbereich
Alloy SnAg3.0Cu0.5Melting range 217- 219°CDensity 7.5 g/m3
· well known alloy· investigated by IPC· melting range
Lote
Allo
ys
1514
Bleihaltige Lote die Klassiker
Leaded Alloys the classics
SnPb
Legierungen SnPb; PbSn; SnPbAg; SnPbCu etc.
Alloy SnPb; PbSn; SnPbAg; SnPbCu etc.
LieferformenDelivery Shapes
Format Lmm
Wmm
Hmm
Ingots 1 kg 325 28 15
4 kg 300 50 40
Ingots with hole 4 kg 515 50 22
6 kg 570 48 35
Bar 285 42 12
1 kg 300 30 15
Pellet 12 x 25
Wire, solid on reel ø 1.0 - 6.0
Weitere Lieferformen auf Anfrage Other forms of delivery on request
ÜbersichtSummary
Welche Legierung ist für welche Applikation?
Which alloy for which application?
Application Leaded Process
High reliabilityAutomotive applications
Medium reliabilityIndustrial applications
Standard reliabilityConsumer electronics
SN100C®
Sn99.3Cu0.7NiGe
SN100CS+SnCu0.7NiGe
High rel. alloyLow pricesLow copperDissolution
SCASnCu0.7Ag0.3
Refi ll for wavesoldering
(stabilizes Cu content)
Sn63Pb37(standard)
SCAN-GeSnCuAgNiGe
Commodity forindustrial apps
SN97CSn96.5Ag3Cu0.5
Commodity forindustrial apps
SN96CSn96.5Ag3.8Cu0.7
Commodity forindustrial apps
Lead-free process
SCASnCu0.7Ag0.3
Legierung SnCu0.7Ag0.3Schmelzbereich 219- 227°CDichte 7.3 g/cm3
· preisgünstig
Alloy SnCu0.7Ag0.3Melting temperature 219- 227°CDensity 7.3 g/cm3
· low price
Sonderlegierungen nach Kundenvorgaben
· Sonderlegierungen auf Anfrage· Sprechen Sie uns an!
Special alloys according to customer´s specifi cations
· Special alloys on customer request· Contact us!
SCA0307SnCu0.7Ag0.3
SnPb37
Meltingrange°C 217 - 227 183
Densityg/cm3 7.37 8.4
ConductivityµΩm
13 14.5
Bleifreie LoteLead-free Alloys Lo
te A
lloys
1716
Auswahlhilfe zu den LötmittelnApplication guideline
Schmelztemperaturen von StandardlotenMelting temperatures of standard alloys
SN10
0C®
-XF3
+SA
C3-X
F3+
OT2M
SAC
3OT
2M S
CAN-
Ge07
1
390-
RX-H
T (+
)32
3-IT
M
396-
DRX+
396-
DRX-
M+
95-R
XZ-M
95-D
RX+
95-D
RX-M
+
327-
SEL
385-
SEL
95-S
EL
94-S
EL88
-SEL
SN10
0C®
SN10
0CS+
SCA
SN97
C
SN96
CSn
63Pb
37
LF 2
220
NCBr
illian
t B20
12
LF 3
135
NC
Coba
r 395
-90
Coba
r 395
-99
SN10
0C®
SCA
SN97
C
SN96
C
Sn63
Pb37
Refl ow nitrogen 5 5 5 5
Refl ow air 4 4 5 5
Vaporphase 3 3 4 5
Wave nitrogen 5 5 5 4 5 5 4 2 2 2 2 2 5 4 4 5 5 5
Wave on air 4 4 4 5 4 4 5 2 2 2 2 2 4 5 3 4 4 5
Selectice nitrogen 4 3 2 2 3 2 2 5 5 5 5 5 5 4 4 5 5 5
Selective on air 4 3 2 2 3 2 2 5 5 5 5 5 4 5 3 4 4 5
Manual soldering 5 5 5 4 4 5 3 4 4 5
Automatic soldering 4 5 5 4 4 5 3 4 4 5
5 Especially made for this purpose
4 Generally qualifi ed for this purpose
3 Generally useable for this purpose
2 Generally not useable for this purpose
1 Wrong choice
Alloyname Composition DensityMelting
temperatureWave Selective Dipping
Bi58Sn42 Bi58Sn42 8.7 139 2 2 3 5 ~ ~ ~
Sn63Pb37 Sn63Pb37 8.4 183 5 5 5 5 250 250- 280 > 280
SN96C SnAg3.8Cu0.7 7.5 217 5 4 3 5 265 290- 320
SN100C®; SN100CS+ SnCu0.7NiGe 7.4 227 5 5 5 4 265 290- 320 > 300
SnCu1 SnCu1 7.3 227 3 3 3 3 265 290- 320
SN97C SnAg3.0Cu0.5 7.5 217- 219 5 4 3 5 265 290- 320
SCA SnAg0.3Cu0.7 7.3 217- 227 4 3 3 4 265 291- 320
SCAN-Ge 071 SnCu0.7Ag1.0NiGe 7.4 217- 227 3 4 4 5 265 291- 320
SN100C3 SnCu3NiGe 7.3 227- 260 1 1 5 1 ~ ~ > 400
SN100C4 SnCu4NiGe 7.4 227- 270 1 1 5 1 ~ ~ > 500
PbSn5Ag2 PbSnAg2.0 11.1 296- 301 2 3 5 2 ~ ~ > 400
PbAg2 PbAg2.0 11.2 304- 305 2 3 5 2 ~ ~ > 400
Wav
e
Sele
ctiv
e
Dipp
ing
Reflo
w
Typical apps Typical process temperature
1716
Refl ow Wave fl uxes Selective fl uxesSelective andwave alloys Wire fl uxes Wire alloys
Lote
Allo
ys
1918
LotpastenSolder Paste
ApplicationNo Clean
Lead free processNo Clean
Leaded processCleanable
Water Soluble
High ReliabilityAutomotive applications
Moderate ReliabilityIndustrial application
Standard ReliabilityConsumer electronics
F3+REL0
SAC305
SCAN-GeSN100C®
SAC0307SN100C®
F3+REL0
SN62S6M
S6M
SN63
M3SREL1
CuAgSAC305
S9M
Application Proposal Pro Contra
VaporphaseOT2M SCAN-Ge071 SCAN-Ge071-XF3+
Large melting rangeAnti-tombstoning
Dull solder joints
Refl ownitrogen process
OT2M SAC3SAC3-XF3+SAC3-XM3S
Standard alloy Dull solder joints
Refl owair process
OT2M SAC3SAC3-XF3+
SN100C®-XF3+
Different alloys availableGood wetting properties
Melting temperature of SN100C®
Leaded alloysOT2 S62 (S63)
S62-XF3+ S6M-XM3S
Low melting temperaturesWell known technology
Leaded
Low temperature BSA04-XSP Melting temperature 139°C Brittleness
OT2MROL0
SAC305
SCAN-GeSN100C®
SAC0307SN100C®
Lotp
aste
n S
olde
r pas
te
M3SREL1
SN62S6M
S6M
SN63
WW50ROH0
SAC305SN100C®
SN62S6M
2120
Lotp
aste
n S
olde
r pas
te
Flux Powder Type Alloy
Zum Drucken For printing application
OT2MOT2XF3+ (HF3+)
Type 3 / Type 4Type 3 / Type 4Type 3 / Type 4
Pb-freeVariousVarious
XM3S / HM3S Type 3 / Type 4 Various
WW50 Type 3 Various
XSP Type 3 BiSnAg based alloys
Zum Dispensen For dispensing application
325-GM5 Type 3 Various
GT2 Type 4 Various
GF3+ Type 4 Various
Bleifreie LegierungenSAC3 SnAg3.0Cu0.5CuAg SnAg4.0Cu0.5BSA04 Bi57Sn42Ag0.4SN100C® SnCu0.7NiGe
Bleihaltige LegierungenS62 Sn62Pb36Ag2S6M Sn62.5Pb36.5Ag1
PulvertypenPulver Typ 2 25–53 micronPulver Typ 3 25–45 micronPulver Typ 4 20–38 micronPulver Typ 5 10–25 micron
Lead-free alloysSAC3 SnAg3.0Cu0.5CuAg SnAg4.0Cu0.5BSA04 Bi57Sn42Ag0.4SN100C® SnCu0.7NiGe
Leaded alloysS62 Sn62Pb36Ag2S6M Sn62.5Pb36.5Ag1
Powder typesPowder Type 2 25–53 micronPowder Type 3 25–45 micronPowder Type 4 20–38 micronPowder Type 5 10–25 micron
LieferformenAvailable Packaging
· Dosen 500 g· Kartuschen 650 g· Kartuschen 1300 g· Profl ow· Dispenser
· Jars 500 g· Cartridges 650 g· Cartridges 1300 g· Profl ow· Syringes
2322
LotdrähteSolder wire Lo
tdrä
hte
sol
der w
ire
Application Lead free process Leaded process
High reliabilityAutomotive applications
Moderate reliabilityIndustrial applications
Standard reliabilityConsumer electronics
LF2220NCREL0
BRILLIANT B2012ROL0
SAC - LoteSN100C®
LF2220NCREL0
BRILLIANT B2012ROL0
SnPbSnPbAg
C395-99REL1
LF3135NCREM1
SAC - LoteSN100C®
C395-99REL1
LF3135NCREM1
SnPbSnPbAg
Classifi cationaccording J-STD 004
Proposal Available alloy Advantage
REL0ROL0
LF2220 NCBRILLIANT 2012
SN100C®SAC SnPb
SnPbAg
No CleanHalide free
Clear residues (BRILLIANT)
REL1 C395-99
SN100C®SAC SnPb
SnPbAg
No CleanHalide free
REM1 LF 3135 NC
SN100C®SAC SnPb
SnPbAg
No Clean
ROL0SN100C® B2012 FG 2.2%
Alloy Flux Flux content
According to J-STD-004
Weight 0.25 / 0.4 kg 0.5 / 1.0 kg 0.4 / 0.8 kg
Marking 63 / 37 BZ K80
Height 63 mm 80 mm 80 mm
Outsidediameter 63 mm 76 mm 80 mm
Insidediameter 11 mm 30 mm 16 mm
Reels(piece / Carton)
10 pieces 10 pieces 10 pieces
Parameter Standard
Diameter in mm 0.3 / 0.5 / 0.8 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0 / 3.5
Flux content (weight %) 2.2
2524
FlussmittelFlux
Application VOC Low -VOC VOC-free
High reliabilityAutomotive applications
Industrial applications
Standard reliabilityConsumer electronics
385-DREL0
High rel. fl ux
390-RX-HTREL0
Proven relia-ble product
Optimum perfor-
mance with SN100C®
323-ITMREL1
Optimum performance
with OSP
396-DRX-M+
ORL0
Strong formulation
Proposal Advantage Disadvantage
VOC (100% alcoholic)
385-D390-RX-HT 390-RO-HT
390-RX-HT+ 323-ITM
Moderate preheatingReliable
Familiar technology
Flash pointStorage restrictions
Alcoholic odour
VOC free396-BS
95-RXZ-M 95-DRX-M+
Easier to use than VOC freeGood wetting for lead free
Preheating neededLimited in use for selective
VOC free 396-DRX-M+Environmentally friendlyLow cost transportation
Good preheating neededCorrosion risk on humidityProcess upgrades needed
Flus
smitt
el F
lux
396-BSREL1
Anti-Solderball
95-RXZ-MREL0
All purpose fl ux
approvals
95-DRX-M+
ORL0
Low residues
24
AnodenAnodes
Auszug aus dem Standardprogramm
Fordern Sie unseren Gesamtkatalog an!
Standard anodes
Please ask for the general catalogue!
Alloy Deliverysizes Alloy Deliverysizes
Sn Pb Board:200 x 10 x 100 – 6000 mmBillet: 85 x 60 x 100 – 1250 mmBowl:ø 50 mmPellets:ø 25 x 12 mmHemisphere:ø 25 x 50 mm
Pb SnPb SbPb Sb AgPb Sn AgPb Sn Sb
Round massive:ø 5 – 50 mmTube:di / Da13/10 – 55/40 mmReel:100 – 6000 mm lang
Profi les:Smooth on both sidesDouble-sided corrugated / ribbedOne-sided corrugated / ribbedDimensions on request
Zusammensetzung: Ausschnitt aus EN 1179:2003Composition: Extract from EN 1179:2003
1 2 3 4 5 6Varieties-classifi cation
Color coding Nominalcontent
Pb
max.
Cd
max.
Fe
max.
Sn
max.
Cu
max.
Al
max.
Sum of the elements in the column
1-6
Z1 White 99.995 0.003 0.003 0.002 0.001 0.001 0.001 0.005
LieferformenDelivery shapes
Standardalloy Dimension Packaging
Zn 99.995DIN EN 1179:2003
Solid sphereHemisphere
PelletsVarious boardsVarious billets
Customized on request
Tin / Wire galvanic Chrome plating
Composition in % (mass share)
Anod
en A
node
s
MassivdrähteSolid wires
Lieferprogramm SpritzdrähteProduct range spray wires
Zn 99.9Babbit Sn89Sb7.5Cu3.5Sn90Zn7Cu3ZnCu0,4Ti0.1Sn 99.9Sn97Cu3Diverse Durchmesser
Zn 99.9Babbit Sn89Sb7.5Cu3.5Sn90Zn7Cu3ZnCu0.4Ti0.1Sn 99.9Sn97Cu3Different diameters
LieferformenAvailable Dimensions
Format Lmm
Wmm
Hmm
Wire solid on reel ø 1.0 - 6.0
Weitere Lieferformen auf Anfrage Other dimensions on request
2726
In unserem Lieferprogramm fi nden Sie auch Opferanoden für die vielfältigsten Anwendungen:
· Schiffsbau· Pipelines· Onshore / Offshore
Verschiedene Materialien:
· Zink (Zn)· Aluminium (Al)· Zink – Alu (ZnAl)
Fordern Sie unseren Gesamtkatalog an!
The product range contains different typesof sacrifi cial anodes for many applications:
· naval architecture· Pipelines· Onshore / Offshore
Different materials:
· zinc (Zn)· aluminium (Al)· zinc – Alu (ZnAl)
Please ask for the general catalogue!
OpferanodenSacrifi cial anodes Op
fera
node
n s
acrifi
cal
ano
des
SSP – Solder Support Products
· Balver braid· Balver overcoat pen· Balver fl ux pen· Solder mask· Balver tip· Balver GPC-R-114· 120-TEM· SMTA-0240
2928
3130
SSP
• Analysenergebnisse in Echtzeit• Weltweit sicherer Zugriff• Selektierte Verlaufsdiagramme• Plattformunabhängig• Datenexport
• results in real-time• secure access worldwide• selective history chart• responsive web-design• data export
WebAccessOnline Solder Sample Monitor
TablesDetails
Charts
Labordienstleistungen für• Lotlegierungen• Röhrenlote• Flussmittel
Laboratory services for• solder alloys• cored wire• solder fl ux
IPC und Schulungen
Balver Zinn ist nicht nur autorisierter IPC Distributor sondern auch zertifi -ziertes IPC-Trainingscenter mit Master IPC Trainern (MIT) für IPC-A-610; J-STD-001 und IPC-7711/7721. Dieses erlaubt uns, zukünftig auch Certifi ed Trainer auszubilden.
Produkte und Leistungen:
IPC-Standards • Hardcopy Deutsch • Hardcopy Englisch • CD‘s und Download
IPC-A-610CISSeminare • BZ-Trainingscenter • Inhouse
IPC-A-610CITSeminare • BZ-Trainingscenter • Inhouse
J-STD-001CISSeminare • BZ-Trainingscenter • Bei Partnern
Handlötschulungen • Eintägige Kurse • Zweitägige Kurse
Prozessschulungen • SMD • THT • Lotbadmanagement
IPC and Training
Balver Zinn is not only an authorized IPC Distributor, but also a Certifi ed IPC-A-610 training centre with Master IPC Trainers (MIT) for IPC-A610; J-STD-001 and IPC-7711/7721. We also will train Certifi ed Trainer (CIT).
Products and services:
IPC-Standards • Hardcopy German • Hardcopy English • CD‘s and download
IPC-A-610CISSeminars • BZ-Trainingscenter • Inhouse training
IPC-A-610CITSeminars • BZ-Trainingscenter • Inhouse training
J-STD-001CISSeminars • BZ-Trainingscenter • In cooperation with partners
Trainingonhandsoldering • one-day course • two-day course
Processtraining • SMD • THT • Solder bath management
32
Balver Zinn / Cobar Netzwerk Balver Zinn / Cobar network
· Balver Zinn Josef Jost GmbH & Co. KG Blintroper Weg 11 58802 Balve Germany
· Cobar Europe BV Aluminiumstraat 2 4823 AL Breda Netherlands
· Cobar Solder Products Inc. Cobar Solder Products Division Member of the Balver Zinn Group 1087 Redi Mix Road Unit # 6 Little River, South Carolina 29566 USA
V2
Bal
ver
Zin
n Li
efer
pro
gra
mm
09/
15
Recommended