View
221
Download
0
Category
Preview:
Citation preview
8/18/2019 Catalogo FPZ
1/88
single impeller - single stageMS
TSsingle impeller - double stage
TD
MD
twin impeller - double stage
twin impeller - single stage
The standard FPZ design is a direct drive
configuration, with a dynamically balanced
impeller fitted directly on the motor shaft. Fitted
motors are 2 pole, 1 and 3 phase, rated for
continuous service. Standard motors utilize
class F insulation, are suitable for use with a
variable speed drive (3 phase only), and are
rosion resistance.
designs utilize a standard Nema
(or metric) electric motor that is directly coupled
to the blower shaft. This direct coupled design
allows the use of specialty motors that may be
required to meet a variety of electrical
requirements. For some models the vacuum /
pressure capabilities can be increased with the
®
Standard Design “GOR”“GVR”
triple impeller - three stage
TT
DESIGNS designs
Standard Design GOR / GVR
DesignDesign
Design
“GOR / GVR”
design.tropicalized for cor GOR / GVR
8/18/2019 Catalogo FPZ
2/88
applications APPLICATIONS
Thousands of FPZ blowers are working in a variety of
applications: from commercial to industrial installations,
in food processing to pharmaceuticals, from textiles to
aerospace, in medical applications to environmental.
Wherever efficiency and reliability are needed, FPZ
responds with the appropriate product “solution”
- Compact execution
- Simple concept
- Reduced maintenance costs
- Modular design
Advantages of side channel blowers
- Pulsation and oil free air
Blowers have an impeller blade mounted inside
a housing. As air passes the inlet port, impeller
blades draw air in and accelerate the air outward
and forward. As each impeller blade strikes it,
the air moves faster and faster. At the base of
the housing an air stripper diver s the air out of
the housing reducing the speed and then
increasing the pressure.
How Blowers Work
t
®
8/18/2019 Catalogo FPZ
3/88
Page(s)
General Pressure and Vacuum Performance Curves 4 5
K Series " MOR" Blowers - Direct DriveMax
CFM
MaxPressure
(In H2O)
Max
Vacuum
(In Hg.) Pressure Vacuum
SCL K03-K06 MS Single Stage Blowers 216 132 9.6 6-7 40-41
SCL K07-K12 MS Single Stage Blowers 726 211 11.1 8-9 42-43
SCL K05-K06 TS Single Stage Blowers 400 85 6.3 10-11 44-45
SCL K07-K12 TS Single Stage Blowers 1410 110 8.1 12-13 46-47
SCL K07R-12 MD Two Stage Blowers 336 300 14.7 14-15 48-49
SCL K0 -K06 TD Two Stage Blowers 222 180 11.8 16-17 50-51
SCL K07-K12 TD Two Stage Blowers 716 225 13.2 18-19 52-53
06 / SH / DH Blowers Performance Data
SCL 06 Single Stage Blowers 39 52 3.5 20-21 54-55SCL 10DL-15DH Two Stage Blowers 35 120.5 8.1 22-23 56-57
SCL 20DH-40DH Two Stage Blowers 98 201 11.1 24-25 58-59
K Series Direct Coupled - " GOR/GVR" configurationSCL K03-K06 MS-GOR/GVR Single Stage Blowers 216 140 9.6 26-27 60-61
SCL K07-K12 MS-GOR/GVR Single Stage Blowers 726 200 10.3 28-29 62-63
SCL K05-K06 TS-GOR/GVR Single Stage Blowers 400 130 7.8 30-31 64-65
SCL K07-K12 TS-GOR/GVR Single Stage Blowers 1410 150 10.3 32-33 66-67
SCL K07R- K12 MD GOR/GVR Two Stage Blowers 336 280 14.7 34-35 68-69
SCL K07-K12 TD GOR/GVR Two Stage Blowers 716 225 13.2 36-37 70-71
SCL K09-K11 TT GOR/GVR Three Stage Blowers 597 340 17 38-39 72-73
Values in above table based on 60 hz performance
Accessor iesInstallation Guide General guide on how to install accessories. 74
VRL6-9 Safety valve selection guide 75
VRL6-9 Safety Valves 76
VRL6HP / VRL8HP High pressure safety valves 77
CSL / CT Filters for vacuum applications. 78
FS Filter / Silencers for pressure applications 79
VG-020-013 Dirty Filter Indicator 80
VS 6 / VS 8 Flow Converting Devices for diverting air stream 81
VK / PK Flange Connectors for safety valves and flexible hoses 82
CA / CK Filter Manifolds and 90 Degree Manifold for K series blowers 83
VG / PG / CV / SS / IH Gauges, Check Valves, Silencers, and Sound Enclosures 84
MF / TF / MP Flexible Sleeves, Flanges, Sleeves 85
TechnicalSingle phase motor information 86
Three phase motor information 87
Airflow Through an Orifice 88
FPZ Pneumatic Range 89
Disclaimer The information contained in this catalog is based on information that we believe to be correct. It is the users responsibility to determine the suitability ofthe product for the application they are used in and the user assumes all risk and liability whatsoever in connection therewith.
Table of Contents
® FPZ, Inc150 N. Progress DriveSaukville, WI, 53080 - U.S.A. Tel. (262) 268-0180 Fax (262) 268-0415 E-mail usa@fpz.com
SS1
4
303
8/18/2019 Catalogo FPZ
4/88
4
Pressure Performance Curves
® FPZ, Inc150 N. Progress DriveSaukville, WI, 53080 - U.S.A. Tel. (262) 268-0180 Fax (262) 268-0415 E-mail usa@fpz.com
3
10
7 1/2
5 1/2
4
K07-MS
5 1/2
7 1/2
K08-MS
15
10
K10-MS
25
15
20
10
7 1/27 1/2
10
15
K07-TS
10
15
7 1/2
K08-TS
15
20
25
K10-TS
20
15
10
7 1/2
K09-MS
15
20
25
K09-TS
10
15
20
25
30
K11-TS
5 1/2
4
3
K05-TS
K06-TS
7 1/2
1/2
1/3
16001 20 0 14 001000900800700600500400350300250 200 150 100 75 50 25 0
0
20
40
60
80
100
120
140
160
180
200
220
Capacity (cfm)
S t a t i c d i f f e r e n t i a l p r e s s u r e ( I n W G )
25
K05-MS
4
3
2
5 1/2
K06-MS
3
4
3/4
K03-MS
2
1 1/2
10
6 1/5
K04-MS
1
5 1/2
06
Legend
K10-TS
25
Model
Installed power
7 1/2
5 1/2
4
3
K08-MD
15
7 1/2
K10-MD
15
20
10
7 1/2
7 1/2
10
15
K07-TD
10
15
7 1/2
K08-TD
15
20
25
K10-TD
15
10
7 1/2
K09-MD
15
20
25
K09-TD
10
15
25
20
25
K11-TD
2
5 1/2
3
K05-TD
K06-TD
5 1/2
10
3/4
1
1 1/2
3
4
1/
3
30
700650600550500450400 350300250200175150 125 100 75 50 25 800
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
0
S t a t i c d i f f e r e n t i a l p r e s s u r e ( I n W G )
10
K07-MD
7 1/2
20
4
10DL
15DH
20DH
30DH
40DH
Legend
K10-TD
25
Model
Installed power
2
1
5 1/2
5 1/2
Curves refer to air at 68°F temperature and 29.92 In Hg atmospheric pressure (abs) measured at inlet port.Tolerance on given values ± 10% - data can change without prior notice.
Capacity (cfm)
15
20
K11-MS
K12-MS
25
K11-MD
K12-MD
25
20
15
K12-TS30
25
3
2
K04-TD
1/2
3
K12-TD
8/18/2019 Catalogo FPZ
5/88
5
Vacuum Performance Curves
® FPZ, Inc150 N. Progress DriveSaukville, WI, 53080 - U.S.A. Tel. (262) 268-0180 Fax (262) 268-0415 E-mail usa@fpz.com
4
15
20
25
15
20
25
25
30
K04-MS1
2
3
2
K05-MS
6 1/5
5 1/2
4
3
K06-MS
10
7 1/2
5 1/2
4
K07-MS
5 1/2
7 1/2
K08-MS
15
10
K09-MS
15
20
10
7 1/2
20
15
10
7 1/2
K10-MS
10
15
20
5 1/2
4
3
K05-TS
K06-TS
7 1/2
10
7 1/2
10
15
K07-TS
10
15
7 1/2
K08-TS
600 1100800450 1000900700500400350300250 200 150 100 75 50 25 0 1200 1400 1600
K09-TS
K10-TS
K11-TS
1/2
1/3
06
0
20
40
60
80
100
120
140
160
Capacity (cfm)
S t a t i c d i f f e r e n t i a l p r e s s u r e ( I n W G )
3
Capacity (cfm)
S t a t i c
d i f f e r e n t i a l p r e s s u r e ( I n W G )
K07-MD
3
4
5 1/2
7 1/2
K08-MD
10
7 1/2
5 1/2
K09-MD
10
7 1/2
5 1/2
K10-MD
15
10
7 1/2
20
15
10
K05-TD
3
4
5 1/2
10
K06-TD
7 1/2
5 1/2
7 1/2
10
15
K07-TD
15
10
7 1/2
K08-TD K09-TD
25
20
K10-TD
25
20
15
25
20
550 800650450 750700600500400 350300250200150 100 75 50 25 0
10DL
1/3
15DH
3/4
1
1 1/2
1
20DH
2
30DH
3
40DH
0
20
40
60
80
100
120
140
160
180
200
220
Curves refer to air at 68° F temperature, measured at inlet port and 29.92 In Hg atmospheric backpressure (abs).Tolerance on given values ± 10% - data can change without prior notice.
K11-MD
K12-MD
20
15
K11-MS
K12-MS
25
15
20
Legend
Installed power
odelM
25
TSK10-
25
Legend
Model
K10-TD
Installed power
K12-TS
30
K11-TD
K 1 -TD2
30
3/4
K03-MS
1 1/2
1/2
5 1/2
1 1/2
2
K04-TD
8/18/2019 Catalogo FPZ
6/88
TECHNICAL CHARACTERISTICS- Aluminium alloy construction- Smooth operation- High efficiency impeller- Maintenance free
-Mountable in any position
- Recognized TEFC - cURus motor
OPTIONS- Special voltages (IEC 38)- Surface treatments
ACCESSORIES- Inlet and/or inline filters- Additional inlet/outlet silencers- Safety valves- Flow converting device- Optional connectors
ModelMaximum
flowScfm
Installedpower
Hp
Maximumdifferential pressure
p ( In WG )
Noise levelLp dB (A)
(1)
Overalldimensions
H
Weight
60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz
3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm Inches Lbs
3/4 3/4 64 60 62.0 60.0 10.43 24.30K03-MS 52 43
1 1 95 77 62.3 60.3 11.97 26.50
1 ½ 1 ½ 58 80 64.8 62.8 11.65 36.40
2 2 85 100 65.0 63.0 13.78 43.00K04-MS 98 81
3 - 120 - 65.2 - 13.78 49.60
2 2 52 70 70.5 68.5 13.20 51.80
3 3 90 110 70.8 68.8 13.20 58.40K05-MS 156 129
4 4 128 120 71.1 69.1 14.40 67.20
3 3 50 65 73.0 71.0 13.54 68.70
4 4 75 95 73.3 71.3 14.17 71.65
5 ½ 5 ½ 110 140 73.6 71.6 14.17 77.60K06-MS 216 179
6 1/5 (2) - 132 - 73.9 - 14.45 77.60
(1) Noise measured at 1 m distance with inlet and outlet ports piped, in accordance to ISO 3744.(2) No cURus motor
Model a b c d e f G I m n o p1 q r s t u z
K03-MS 9.49 10.55 5.79 1.69 9.06 8.07 1”1/4 NPT 3.39 0.39 3.27 5.59 8.07 0.71 2.95 0.16 M6 5.51 0.47
K04-MS 11.22 12.40 6.77 1.93 10.04 8.86 1”1/2 NPT 4.02 0.47 3.74 6.73 8.74 0.71 2.76 0.16 M6 6.89 0.71
K05-MS 12.87 14.37 7.87 2.13 12.60 10.24 2” NPT 4.72 0.59 4.53 10.43 12.60 0.71 3.86 0.16 M8 7.87 0.75
K06-MS 14.80 15.47 8.07 2.13 12.80 11.42 2” NPT 4.92 0.59 5.51 10.71 13.15 0.71 3.35 0.16 M8 9.45 0.75
e
a
f IG
d
c
b
s
p1
o
Ømn r q
z
H
3x120°øu
t
Accessory
REGENERATIVE BLOWERS - PRESSURE
SCL K03 / K04 / K05 / K06
SN 1874-8 1/2
® FPZ, Inc150 N. Progress DriveSaukville, WI 53080 - U.S.A. Tel. (262) 268-0180Fax (262) 268-0415E-mail usa@fpz.com
- For proper use, the blower should be equipped with inlet filter and safety valve; other accessories available on request.- Ambient temperature from +5° to +104°F.- Specifications subject to change without notice.
Dimensions in inches.Dimension for reference only.
MS SERIES
6
8/18/2019 Catalogo FPZ
7/88
C A P A C I T Y
A B S O R B E D
P O W E R
T E M P E R A T U R E I N C R E A S E
REGENERATIVE BLOWERS - PRESSURE
SCL K03 / K04 / K05 / K06
SN 1874-8 2/2
®
Curves refer to air at 68°F temperature and 29.92 In Hg atmospheric pressure (abs) measured at inlet port.Values for flow, power consumption and temperature rise: +/-10% tolerance.Data subject to change without notice.
p
p s i g
0
1
2
3
4
5
0 50 100 150 200 250
4
K05-MS
3
2
0
20
40
60
80
100
120
140
I n W G
Scfm
60 Hz
6 1/5
5 1/2
4
K06-MS
3
3
2
1 1/2
K04-MS K03-MS
3/4
1
p
p s i g
0
1
2
3
4
5
0
20
40
60
80
100
140
0 1 2 3 4 5 6 7
K06-MS
K05-MS
60 Hz
Hp
I n W G
K04-MS
K03-MS
0
1
2
3
4
5 p
p s i g
I n W G
0
20
40
60
80
100
120
140
160
0 50 100 150 200 Scfm
50 Hz
4
3
3
5 1/2
4
1 1/2
2
3/4
K03-MS K04-MS
2
K05-MS K06-MS
1
0
1
2
3
4
5
p
p s i g
I n W G
0
20
40
60
80
100
120
160
0 1 2 3 4 5 6
50 Hz
Hp
K05-MS
K06-MS
K04-MS
K03-MS
p
p s i g
0
1
2
3
4
5
K05-MS K04-MS
60 Hz
K06-MS
0
20
40
60
80
100
140
0 20 40 60 80 100 120 140 °F
I n W G
K03-MS
0
1
2
3
4
5
p
p s i g
0 20 40 60 80 100 120 140 160 180 200 °F
I n W G
0
20
40
60
80
100
120
16050 Hz
K05-MSK06-MS
K04-MS
K03-MS
MS SERIES
8/18/2019 Catalogo FPZ
8/88
ModelMaximum
flowScfm
Installedpower
Hp
Maximumdifferential pressure
Dp ( In WG )
Noise levelLp dB (A)
(1)
Overalldimensions
HWeight
60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz
3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm Inches Lbs
K07-MS 294 243
4 4 50 63 78.7 76.7 15.45 103.00
5 ½ 5 ½ 75 86 79.0 77.0 15.45 107.10
7 ½ 7 ½ 130 138 79.3 77.3 18.37 145.70
10 10 181 161 79.6 77.6 18.37 154.50
K08-MS 381 316
5 ½ 5 ½ 40 52 79.7 77.7 15.45 115.70
7 ½ 7 ½ 68 90 80.0 78.0 18.37 154.30
10 10 115 125 80.3 78.3 18.37 163.10
15 15 181 181 80.6 78.6 19.15 184.00
K09-MS 471 390
7 ½ 7 ½ 50 63 80.2 78.2 18.84 166.50
10 10 80 95 80.5 78.5 18.84 175.10
15 15 140 155 81.0 79.0 19.63 196.20
20 20 181 181 81.3 79.3 23.74 269.00
K10-MS 556 460
7 ½ 7 ½ 36 51 80.1 78.1 18.84 170.90
10 10 64 80 80.5 78.5 18.84 179.50
15 15 120 135 81.0 79.0 19.63 200.60
20 20 167 191 81.4 79.4 23.74 273.40
25 25 211 201 81.6 79.6 24.61 298.70
K11-MS 650 539
10 10 40 53 82.0 80.0 19.04 194.90
15 15 82 97 82.4 80.4 19.83 216.00
20 20 125 141 82.7 80.7 23.94 288.80
25 25 162 201 85.6 83.6 24.81 313.10
K12-MS 726 602
15 15 52 90 82.9 80.9 19.95 223.70
20 20 85 130 83.2 81.2 24.06 296.50
25 25 140 160 86.1 84.1 24.92 320.80
REGENERATIVE BLOWERS - PRESSURE
SCL K07 / K08 / K09 / K10 / K11 / K12SERIES MS
SN 1805-14 1/2
® FPZ, Inc
150 N. Progress DriveSaukville, WI 53080 - U.S.A. Tel. (262) 268-0180Fax (262) 268-0415E-mail usa@fpz.com
TECHNICAL CHARACTERISTICS- Aluminium alloy construction- Smooth operation- High efficiency impeller- Maintenance free
- Mountable in any position
- Recognized TEFC - cURus motor
OPTIONS- Special voltages (IEC 38)- Surface treatments
ACCESSORIES- Inlet and/or inline filters- Additional inlet/outlet silencers- Safety valves- Flow converting device- Optional connectors
Dimensions in inches.Dimension for reference only.
Model a b c d e f G I m n o p1 q r s t u z
K07-MS 16.69 18.84 10.59 3.23 18.43 17.24 3” NPT 6.10 0.51 11.81 13.78 20.16 0.98 5.39 0.20 M8 11.61 0.63
K08-MS 17.99 19.61 10.59 3.23 18.82 17.64 3” NPT 6.10 0.51 11.81 13.78 20.16 0.98 5.39 0.20 M8 12.2 0.63
K09-MS 19.37 22.09 12.40 3.78 20.00 18.82 4” NPT 7.17 0.51 11.81 13.78 23.07 0.98 7.83 0.20 M8 14.17 0.63
K10-MS 20.31 22.56 12.40 3.78 20.00 18.82 4” NPT 7.17 0.51 11.81 13.78 23.07 0.98 7.83 0.20 M8 14.17 0.63
K11-MS 21.34 23.74 13.07 3.58 21.26 20.00 4” NPT 7.87 0.51 11.81 13.78 23.46 0.98 8.03 0.20 M8 15.35 0.63
K12-MS 21.57 23.82 13.07 3.58 21.26 20.00 4” NPT 7.87 0.51 11.81 13.78 23.58 0.98 8.03 0.20 M8 15.35 0.51
- For proper use, the blower should be equipped with inlet filter and safety valve; other accessories available on request.- Ambient temperature from +5° to +104°F.- Specifications subject to change without notice.
(1) Noise measured at 1 m distance with inlet and outlet ports piped, in accordance to ISO 3744.
Accessory
r
q
p1
H
o
n
øm
3x120°øu
z
t
G
d
c
b
e
f
I
a
s
8
8/18/2019 Catalogo FPZ
9/88
Curves refer to air at 68°F temperature and 29.92 In Hg atmospheric pressure (abs) measured at inlet port.Values for flow, power consumption and temperature rise: +/-10% tolerance.Data subject to change without notice.
A B S O R B E D
P O W E R
T E M P E R A T U R E I N C R E A S E
REGENERATIVE BLOWERS - PRESSURE
SCL K07 / K08 / K09 / K10 / K11 / K12MS SERIES
SN 1805-14 2/2
®
0
1
2
3
4
5
6
7
8
p
p s i g
0
20
40
60
80
100
120
140
160
180
200
240
I n W G
0 100 200 300 400 500 700 Scfm600
10
7 1/2
4
7 1/2
15
10
25
15
20
10
7 1/2
20
15
10
15
10
7 1/2
20
5 1/2
5 1/2
K07-MS
K10-MS K08-MS
K11-MS K09-MS
K12-MS
15
20
25
50 Hz
25
Hp
0
20
40
60
80
100
120
140
160
180
240
0 5 10 15 25
I n W G
20
K07-MS
K10-MS
K11-MSK09-MS
K08-MS
K12-MS
50 Hz
0
1
2
3
4
5
6
7
8
p
p s i g
0
1
2
3
4
5
6
7
8
p
p s i g
0
20
40
60
80
100
120
140
160
180
240
0 20 40 60 80 100 120 140 160 180 200 °F
K07-MS
K11-MS
K10-MS
50 Hz
I n W G
K09-MS
K08-MS
K12-MS
C A P A C I T Y
0 100 200 300 400 500 600 800 Scfm700
10
7 1/2
4
7 1/2
15
10
25
15
20
10
7 1/2
20
15
10
25
15
10
7 1/2
20
5 1/2
5 1/2
K07-MS
K08-MS
K10-MS
K11-MS K09-MS
K12-MS
20
15
60 Hz
0
20
40
60
80
100
120
140
160
180
240
I n W G
200
0
1
2
3
4
5
6
7
8
p
p s i g
25
0
1
2
3
4
5
6
7
8
p
p s i g
Hp
K07-MS
K10-MS
0
20
40
60
80
100
120
140
160
180
240
0 5 10 15 20 25
I n W G
60 Hz
K11-MS
K09-MS
K12-MS
K08-MS
0
1
2
3
4
5
6
7
8
p
p s i g
K11-MS
0
20
40
60
80
100
120
140
160
180
240
0 20 40 60 80 100 120 140 160 180 200
K08-MS
K10-MS
60 Hz
°F
I n W G
K09-MS
K12-MS
K07-MS
8/18/2019 Catalogo FPZ
10/88
Model a b c d e f G I m n o p1 q r s t u z
K05-TS 12.87 16.61 10.16 3.03 15.91 14.72 3” NPT 5.91 0.51 11.81 13.58 24.96 0.98 12.91 0.16 M8 7.87 0.75
K06-TS 14.80 17.72 10.31 2.95 15.91 14.72 3” NPT 6.10 0.51 11.81 13.58 26.06 0.98 13.19 0.16 M8 9.45 0.75
Model
Maximum
flowScfm
Installed
powerHp
Maximum
differential pressure
p ( In WG )
Noise level
Lp dB (A) (1)
Overall
dimensionsH
Weight
60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz
3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm Inches Lbs
K05-TS 290 241
3 3 30 45 72.0 70.0 17.45 85.98
4 4 46 70 73.5 71.5 18.64 89.29
5 ½ 5 ½ 72 100 75.5 73.5 18.64 93.70
K06-TS 400 331
5 ½ 5 ½ 36 55 77.2 75.2 18.98 104.72
7 ½ 7 ½ 55 65 77.5 75.5 22.60 141.09
10 10 85 93 77.8 75.8 22.60 149.91
(1) Noise measured at 1 m distance with inlet and outlet ports piped, in accordance to ISO 3744.
REGENERATIVE BLOWERS - PRESSURE
SCL K05 / K06
SERIES TSSN 1921-5 1/2
®
- For proper use, the blower should be equipped with inlet filter and safety valve; other accessories available on request.
- Ambient temperature from +5° to +104°F.
- Specifications subject to change without notice.
Accessory s
G
e
f
I
d
c
b
a
r
o
n
øm
q
3x120°øu t
z
H
p1
TECHNICAL CHARACTERISTICS- Aluminium alloy construction- Smooth operation- High efficiency impeller- Maintenance free
- Mountable in any position- Recognized TEFC - cURus motor
OPTIONS- Special voltages (IEC 38)- Surface treatments
ACCESSORIES- Inlet and/or inline filters- Additional inlet/outlet silencers- Safety valves- Flow converting device- Optional connectors
Dimensions in inches.
Dimension for reference only.
FPZ, Inc150 N. Progress Drive
Saukville, WI 53080 - U.S.A.
Tel. (262) 268-0180
Fax (262) 268-0415
E-mail usa@fpz.com
10
8/18/2019 Catalogo FPZ
11/88
C A P A C I T Y
A B S O R B E D
P O W E R
T E M P E R A T U R E I N C
R E A S E
REGENERATIVE BLOWERS - PRESSURE
SCL K05 / K06TS SERIES
SN 1921-5 2/2
®
Curves refer to air at 68°F temperature and 29.92 In Hg atmospheric pressure (abs) measured at inlet port.Values for flow, power consumption and temperature rise: +/-10% tolerance.Data subject to change without notice.
60 Hz
0
20
40
60
80
100
0 100 200 300 400 500 Scfm
K05-TS
5 1/2
4
3
K06-TS
5 1/2
7 1/2
10
20
40
60
80
100
120
0 50 100 150 200 250 300 350 400
0
Scfm
50 Hz
I n W G
K05-TS
K06-TS
5 1/2
4
3
5 1/2
7 1/2
10
p
p s i g
0
1
2
3
4
0 1 2 3 4 5 6 7 8 Hp9 10
0
20
40
60
80
120
I n W G
K05-TS
K06-TS
50 Hz
p
p s i g
0
1
2
3
0,5
1,5
2,5
3,5 60 Hz
0
20
40
60
80
100
0 1 2 3 4 5 6 7 8 Hp
I n W G
9 10
K05-TS
K06-TS
p
p s i g
0
1
2
3
4
K06-TS
50 Hz
0 20 40 80 140 °F60 100 120
K05-TS
0
20
40
60
80
120
I n W G
p
p s i g
0
1
2
3
0,5
1,5
2,5
3,5
K05-TS
K06-TS
0 20 40 60 80 °F
0
20
40
60
80
100
I n W G 60 Hz
p
p s i g
0
1
2
3
0,5
1,5
2,5
3,5
p
p s i g
0
1
2
3
4
1
8/18/2019 Catalogo FPZ
12/88
- For proper use, the blower should be equipped with inlet filter and safety valve; other accessories available on request.- Ambient temperature from +5° to +104°F.- Specifications subject to change without notice.
ModelMaximum
flowScfm
Installedpower
Hp
Maximumdifferential pressure
∆p ( In WG )
Noise levelLp dB (A)
(1)
Overalldimensions
H
Weight
60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm Inches Lbs
7 ½ 7 ½ 36 48 83.9 81.9 23.76 197.31
10 10 60 71 84.2 82.2 23.76 206.13K07-TS 588 487
15 15 110 121 84.8 82.8 24.55 223.77
7 ½ 7 ½ 18 30 80.8 78.8 23.76 205.47
10 10 37 50 80.9 78.9 23.76 214.29K08-TS 715 592
15 15 75 87 83.3 81.3 24.55 231.92
20 20 80 90 85.0 83.0 29.92 350.53K09-TS 941 780 25 25 110 120 87.0 85.0 30.79 383.60
20 20 65 75 88.1 86.1 29.92 354.94K10-TS 1093 906
25 25 80 95 88.4 86.4 30.79 388.01
25 25 50 69 89.4 87.4 31.38 429.02K11-TS 1254 1039
30(2)
30(2)
70 90 90.0 88.0 31.38 434.53
K12-TS 1410 1168 30(2)
30(2)
45 80 90.6 88.6 31.50 436.75
Model a b c d e f G I j k m n o p1 q r s t u z
K07-TS 16.69 20.91 12.56 3.86 18.43 17.24 4”NPT 7.17 - - 0.51 9.84 21.65 31.57 0.98 11.77 0.20 M8 11.61 0.63
K08-TS 18.03 21.57 12.56 3.86 18.82 17.64 4”NPT 7.17 - - 0.51 9.84 21.65 31.57 0.98 11.77 0.20 M8 12.20 0.63
K09-TS 19.37 24.02 14.37 4.41 20.00 18.82 5.12 8.27 M16 8.27 0.51 9.84 21.65 33.46 - 12.40 0.20 M8 14.17 0.63
K10-TS 20.31 24.53 14.37 4.41 20.00 18.82 5.12 8.27 M16 8.27 0.51 9.84 21.65 33.46 - 12.40 0.20 M8 14.17 0.63
K11-TS 21.26 25.59 14.96 4.17 21.26 20.08 5.12 8.98 M16 8.27 0.51 9.84 21.65 34.25 - 12.60 0.20 M8 15.35 0.63
K12-TS 21.57 25.66 14.96 4.17 21.26 20.08 5.12 8.98 M16 8.27 0.51 9.84 21.65 34.37 - 12.60 0.20 M8 15.35 0.63
(1) Noise measured at 1 m distance with inlet and outlet ports piped, in accordance to ISO 3744.(2) K11-K12-TS Hp 30 vertical assembly only.
For model K09/K10/K11/K12-TS only
Int.k
øG
REGENERATIVE BLOWERS - PRESSURE
SCL K07 / K08 / K09 / K10 / K11 / K12SERIES
SN 1822-11 ss
® FPZ, Inc150 N. Progress DriveSaukville, WI 53080 - U.S.A. Tel. (262) 268-0180Fax (262) 268-0415E-mail usa@fpz.com
Dimensions in inches.Dimension for reference only.
TECHNICAL CHARACTERISTICS- Aluminium alloy construction- Smooth operation- High efficiency impeller- Maintenance free
-Mountable in any position
- Recognized TEFC - cURus motor- G1/8” female thread on both suction
and discharge silencer port flanges
OPTIONS- Special voltages (IEC 38)- Surface treatments
ACCESSORIES- Inlet and/or inline filters- Additional inlet/outlet silencers- Safety valves- Flow converting device- Optional connectors
s G
e f I
d
c
b
a
G 1/8”
For model K11-K12-TS Hp 30 60Hz only
Accessory
t
r o
n n øm
q
z
H
p1
3x120°øu
TS
12
8/18/2019 Catalogo FPZ
13/88
C A P A C I T Y
A B S O R B
E D P O W E R
T E M P E R A T U R E
I N C R E A S E
REGENERATIVE BLOWERS - PRESSURE
SCL K07 / K08 / K09 / K10 / K11 / K12SERIES
®
Curves refer to air at 68°F temperature and 29.92 In Hg atmospheric pressure (abs) measured at inlet port.Values for flow, power consumption and temperature rise: +/-10% tolerance.Data subject to change without notice.
K07-TS
K08-TS
K09-TSK10-TS K11-TS
0
20
40
60
80
120
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Hp
60 Hz
I n W G
p p s i g
0
1
2
3
4
K12-TS
p p s i g
0
1
2
3
4
5
K07-TS
K08-TS
K09-TS
K10-TSK11-TS
0
20
40
60
80
100
140
0 2 4 6 8 10 12 14 16 18 20 22 24 26 Hp
50 Hz
I n W G
K12-TS
p p s i g
0
1
2
3
4
5
100
140
K12-TS
0
20
40
60
80
0 20 40 60 80 100 120 °F
I n W G
50 Hz
K07-TS
K09-TS
K08-TS
K10-TS
K11-TS
p p s i g
0
1
2
3
4
0
20
40
60
80
120
0 20 40 60 80 100 °F
60 Hz
K09-TS
K07-TS
K08-TS
K10-TS
I n W G
K11-TS
K12-TS
p p s i g
0
1
2
3
4
5
I n W G
0
20
40
60
80
100
120
140
0 200 400 600 800 1000 1200 Scfm
50 Hz
K07-TS
K08-TS
K09-TS
K10-TS
K11-TS
20
25
15
10
7 1/210
15
7 1/2
25
20 30
25
30
K12-TS
p p s i g
0
1
2
3
4
Scfm
I n W G
20
25
0
20
40
60
80
100
120
200 400 600 800 1000 1200 1400
15
10
7 1/2 10
15
K08-TS
K07-TS7 1/2
25
20
K09-TS
K10-TS
30
25
K11-TS
1600
60 Hz
K12-TS
30
TS
1
SN 1822-11ss
8/18/2019 Catalogo FPZ
14/88
Model a b c d e f G I m n o p1 q r s t u z
K07R-MD 16.69 18.94 10.59 3.23 18.43 17.24 2” NPT 6.10 0.51 11.81 13.78 16.46 0.71 1.70 0.20 M8 11.61 0.63
K08R-MD 17.99 19.61 10.59 3.23 18.82 17.64 2” NPT 6.10 0.51 11.81 13.78 16.46 0.71 1.70 0.20 M8 12.20 0.63
K09-MD 19.37 22.09 12.40 3.78 20.00 18.82 4” NPT 7.17 0.51 11.81 13.78 25.35 0.98 10.12 0.20 M8 14.17 0.63
K10-MD 20.31 22.56 12.40 3.78 20.00 18.82 4” NPT 7.17 0.51 11.81 13.78 25.35 0.98 10.12 0.20 M8 14.17 0.63
K11-MD 21.35 23.74 13.07 3.58 21.18 20.00 4” NPT 7.87 0.51 11.81 13.78 25.75 0.98 10.31 0.20 M8 15.35 0.63
K12-MD 21.57 23.85 13.07 3.58 21.18 20.00 4” NPT 7.87 0.51 11.81 13.78 25.87 0.98 10.31 0.20 M8 15.35 0.52
(1) Noise measured at 1 m distance with inlet and outlet ports piped, in accordance to ISO 3744.
ModelMaximum
flowScfm
Installedpower
Hp
Maximumdifferential pressure
p ( In WG )
Noise levelLp dB (A)
(1)
Overalldimensions
H
Weight
60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz
3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm Inches Lbs
3 3 68 87 73.5 71.5 16.14 101.40
4 4 110 128 74.0 72.0 16.14 103.605 ½ 5 ½ 150 170 74.5 72.5 16.14 111.50
K07R-MD 129 107
7 ½ 7 ½ 260 260 75.0 73.0 17.52 134.50
5 ½ 5 ½ 85 110 76.2 74.2 16.14 116.90
7 ½ 7 ½ 162 185 76.6 74.6 17.52 140.00
10 10 240 260 77.0 75.0 17.52 151.00K08R-MD 168 139
15 - 260 - 77.3 - 17.52 173.00
5 ½ 5 ½ 54 78 76.9 74.9 16.54 144.40
7 ½ 7 ½ 120 143 78.0 76.0 17.95 167.60
10 10 190 210 79.5 77.5 17.95 178.60K09-MD 221 183
15 15 290 290 80.5 78.5 19.29 200.60
7 ½ 7 ½ 85 110 79.9 77.9 17.91 170.90
10 10 140 165 80.3 78.3 17.91 181.9015 15 245 270 81.4 79.4 19.29 203.90
K10-MD 275 228
20 20 300 300 81.7 79.7 22.97 270.00
10 10 100 125 81.1 79.1 18.11 211.60
15 15 190 220 81.4 79.4 19.49 232.60
20 20 280 300 81.7 79.7 23.23 287.20K11-MD 306 254
25 - 300 - 82.0 - 23.23 353.30
15 15 100 180 82.3 80.3 19.61 240.30
20 20 180 260 82.6 80.6 23.42 295.00K12-MD 336 278
25 - 250 - 82.9 - 23.42 361.00
REGENERATIVE BLOWERS - PRESSURE
SCL K07R / K08R / K09 / K10 / K11 / K12
SN 1848-8 1/2
® FPZ, Inc150 N. Progress DriveSaukville, WI 53080 - U.S.A. Tel. (262) 268-0180Fax (262) 268-0415E-mail usa@fpz.com
- For proper use, the blower should be equipped with inlet filter and safety valve; other accessories available on request.- Ambient temperature from +5° to +104°F.
- Specifications subject to change without notice.
Dimensions in inches.Dimension for reference only.
TECHNICAL CHARACTERISTICS- Aluminium alloy construction- Smooth operation- High efficiency impeller- Maintenance free-
Mountable in any position- Recognized TEFC - cURus motor
OPTIONS- Special voltages (IEC 38)- Surface treatments
ACCESSORIES- Inlet and/or inline filters- Additional inlet/outlet silencers- Safety valves- Flow converting device- Optional connectors
a
b
c
d
e
f
I
G
s
n
o
r q
øm
H
p1
3x120°øu
t
z
MD SERIES
4
8/18/2019 Catalogo FPZ
15/88
C A P A C I T Y
A B S O R B E
D P O W E R
T E M P E R A T U R E I N C
R E S A S E
Curves refer to air at 68°F temperature and 29.92 In Hg atmospheric pressure (abs) measured at inlet port.Values for flow, power consumption and temperature rise: +/-10% tolerance.Data subject to change without notice.
REGENERATIVE BLOWERS - PRESSURE
SCL K07R / K08R / K09 / K10 / K11 / K12
SN 1848-8 2/2
®
p
p s i g
0
1
2
3
4
5
6
7
8
9
10
11
12
I n W G
20
7 1/2
10
15
K10-MD
0 100 200 300 400 Scfm
60 Hz
K08R-MD
10
7 1/2
15
K07R-MD
3
4
7 1/2
15
10
7 1/2
K09-MD K11-MD
10
15
20
25
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
340
5 1/2
5 1/2
5 1/2 K12-MD
15
20
25
p
p s i g
0
1
2
3
4
5
6
7
8
9
10
11
12
I n W G
K10-MD
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
340
0 100 200 300
50 Hz
Scfm
K08R-MD
K07R-MD K09-MD K11-MD
20
7 1/2
10
15 10
7 1/2
3
4
7 1/2
15
10
7 1/2
10
15
20
5 1/2
5 1/2
5 1/2
20
15
K12-MD
0 1
2
3
4
5
6
7
8
9
10
11
12
p
p s i g
0
20
40
60
80
100
120
140
160
180
200
220
240
260
340
0
I n W G
2 4 6 8 10 14 16 1812 20 22 24 Hp
K07R-MD
K08R-MD
K09-MD
K10-MD
K11-MD
K12-MD
60 Hz
p
p s i g
0 1
2
3
4
5
6
7
8
9
10
11
12
0
20
40
60
80
100
120
140
160
180
200
220
240
260
340
0 20 40 60 80 100 120 140 160 180 200
K11-MD
I n W G
60 Hz
°F
K07R-MD
K08R-MD
K09-MD K10-MD
K12-MD
p
p s i g
0
1
2
3
4
5
6
7
8
9
10
11
12
I n W G
0
20
40
60
80
100
120
140
160
180
200220
240
260
340
0 20 40 60 80 100 120 140 160 180 200
50 Hz
°F
K08R-MD
K07R-MD
K09-MD
K12-MD
K11-MD
K10-MD
0
1
2
3
4
5
6
7
8
9
10
11
12
p
p s i g
0
20
40
60
80
100
120
140
160
180
200
220
240
260
340
0 2 4 6 8 10 12 16 18 Hp
I n W G
14
50 Hz
K07R-MD
K08R-MD
K09-MD
K10-MD
K11-MD
K12-MD
MD SERIES
8/18/2019 Catalogo FPZ
16/88
Model
Maximum
flowScfm
Installed
powerHp
Maximum
differential pressure
p ( In WG )
Noise level
Lp dB (A)
(1)
Overall
dimensionsH
Weight
60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz
3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm Inches Lbs
K04-TD 99 822 2 70 95 71.0 69.0 17.26 62.83
3 3 130 160 72.0 70.0 17.26 69.44
K05-TD 153 127
3 3 70 95 73.0 71.0 17.45 84.88
4 4 105 135 74.5 72.5 18.64 88.18
5 ½ 5 ½ 150 190 76.0 74.0 18.64 92.59
K06-TD 222 184
5 ½ 5 ½ 80 120 75.0 73.0 18.98 103.62
7 ½ 7 ½ 125 140 76.0 74.0 22.60 139.99
10 10 180 200 77.0 75.0 22.60 148.81
(1) Noise measured at 1 m distance with inlet and outlet ports piped, in accordance to ISO 3744.
Model a b c d d1 e f G I1 I2 m n o p1 p2 q r r1 s t u w x y z
K04-TD 11.22 12.40 6.77 1.93 4.76 10.04 8.86 1” ½ NPT 4.84 2.01 0.47 3.74 6.73 12.44 10.00 0.71 2.76 0.59 0.16 M6 6.89 7.40 8.43 6.81 0.71
K05-TD 12.87 14.37 7.87 2.13 5.51 12.60 10.24 2” NPT 5.71 2.36 0.59 4.53 10.43 16.85 13.39 0.71 3.86 1.57 0.16 M8 7.87 11.26 11.54 8.11 0.75
K06-TD 14.80 16.54 9.13 2.32 6.69 12.80 11.42 2” NPT 5.94 2.87 0.59 5.51 10.43 19.92 13.94 0.71 5.35 0.75 0.16 M8 9.45 11.26 12.13 8.27 0.75
REGENERATIVE BLOWERS - PRESSURE
SCL K04 / K05 / K06TD SERIES
SN 1931-5 1/2
®
- For proper use, the blower should be equipped with inlet filter and safety valve; other accessories available on request.
- Ambient temperature from +5° to +104°F.- Specifications subject to change without notice.
a
d
b
c
s
e
f
I2
G
t
3x120° øu
y
I1q
d1
w
45°
G
p1
H
z
q
o
p2
x
n r
øm
r1
TECHNICAL CHARACTERISTICS- Aluminium alloy construction- Smooth operation- High eff iciency impeller- Maintenance free
- Mountable in any position
- Recognized TEFC - cURus motor
OPTIONS- Special voltages (IEC 38)- Surface treatments
ACCESSORIES- Inlet and/or inline filters- Additional inlet/outlet silencers- Safety valves- Flow converting device- Optional connectors
Dimensions in inches.Dimension for reference only.
FPZ, Inc150 N. Progress Drive
Saukville, WI 53080 - U.S.A.
Tel. (262) 268-0180
Fax (262) 268-0415
E-mail usa@fpz.com
16
8/18/2019 Catalogo FPZ
17/88
C A P A C I T Y
A B S O R B E D
P O W E R
T E M P E R A T U R E I N C R E A S E
REGENERATIVE BLOWERS - PRESSURE
SCL K04 / K05 / K06TD SERIES
SN 1931-5 1/2
®
60 Hz
5 1/2
4
0
20
40
60
80
100
120
140
160
200
I n W G
0 50 100 150 200 250 Scfm
K06-TD
3 5 1/2
7 1/2
10
3
2
K04-TD K05-TD 1
2
4
5
6
0
3
7
p
p s i g
0
20
40
60
80
100
120
140
I n W G
160
180
240
200
K05-TD K06-TDK04-TD
3
2
5 1/2
4
3
6 1/4
5 1/2
Scfm0 50 100 150 200
50 Hz
8 1/3
1
2
4
5
6
0
3
7
8
p
p s i g
60 Hz
0
20
40
60
80
100
120
140
160
I n W G
200
K06-TD
0 1 2 3 4 5 6 8 10 Hp7 9
K04-TD
K05-TD
1
2
4
5
6
0
3
7
p
p s i g
K05-TD
K06-TD
K04-TD
50 Hz
0 1 2 3 4 5 6 7 8 Hp10 11
0
20
40
60
80
100
120
140
180
I n W G
160
240
1
2
4
5
6
0
3
7
8
p
p s i g
60 Hz
0
20
40
60
80
100
120
140
200
I n W G
160
0 20 40 60 80 100 120 140 160 180 °F
K05-TD
K06-TD
K04-TD
1
2
4
5
6
0
3
7
p
p s i g
0
20
40
60
80
100
120
140
240
I n W G
160
0 20 40 60 80 100 120 140 160 180 °F
K05-TD
K04-TD
K06-TD
50 Hz
180
1
2
4
5
6
0
3
7
8
p
p s i g
1
Curves refer to air at 68°F temperature and 29.92 I n Hg atmospheric pressure (abs) measured at inlet port.Values for flow, power consumption and temperature rise: +/-10% tolerance.Data subject to change without notice.
8/18/2019 Catalogo FPZ
18/88
18
ModelMaximum
flowScfm
Installedpower
Hp
Maximumdifferential pressure
∆∆∆∆p ( In WG )
Noise levelLp dB (A)
(1)
Overalldimensions
HWeight
60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz
3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm Inches Lbs
K07-TD 296 245
7 ½ 7 ½ 90 105 80.9 78.9 23.76 194.00
10 10 135 150 81.2 79.2 23.76 202.82
15 15 225 241 81.8 79.8 24.55 220.46
K08-TD 368 305
7 ½ 7 ½ 58 75 80.1 78.1 23.76 202.16
10 10 95 110 80.4 78.4 23.76 210.98
15 15 170 185 81.5 79.5 24.55 228.62
K09-TD 467 387
15 15 105 125 82.7 80.7 25.81 222.66
20 20 160 180 83.0 81.0 29.92 347.22
25 25 220 240 83.3 81.3 30.79 380.29
K10-TD 571 473
15 15 85 100 86.6 84.6 25.81 271.17
20 20 130 150 86.9 84.9 29.92 351.63
25 25 180 200 87.2 85.2 30.79 384.70
K11-TD 642 53220 20 90 115 87.4 85.4 31.38 392.64
2525
130155
87.985.9
31.38 425.71K12-TD 716 593
25 25 85 140 88.2 86.2 31.50 423.50
30 30 120 190 88.7 86.7 31.50 429.00
(1) Noise measured at 1 m distance with inlet and outlet ports piped, in accordance to ISO 3744.
Model a b c d d1 e f G I1 I2 m n o p1 p2 q r s t u w x y z
K07-TD 16.69 18.94 10.59 3.23 7.56 18.43 17.24 3”NPT 7.36 3.05 0.51 11.81 13.78 25.55 15.43 0.98 5.39 0.20 M8 11.61 18.94 12.56 10.24 0.63
K08-TD 17.99 19.61 10.59 3.23 7.56 18.82 17.64 3”NPT 7.36 3.05 0.51 11.81 13.78 25.55 15.43 0.98 5.39 0.20 M8 12.20 18.94 12.56 10.24 0.63
K09-TD 19.37 22.09 12.4 3.78 8.86 20.00 18.82 4”NPT 8.66 3.58 0.51 11.81 13.78 29.33 17.91 0.98 7.83 0.20 M8 14.17 21.89 14.65 11.89 0.63
K10-TD 20.31 22.56 12.4 3.78 8.86 20.00 18.82 4”NPT 8.66 3.58 0.51 11.81 13.78 29.33 17.91 0.98 7.83 0.20 M8 14.17 21.89 14.65 11.89 0.63
K11-TD 21.26 23.70 13.07 3.54 9.13 21.18 20.00 4”NPT 9.53 3.94 0.51 11.81 13.78 30.12 18.50 0.98 8.03 0.20 M8 15.35 21.89 15.24 12.76 0.63
K12-TD 21.57 23.81 13.07 3.54 9.13 21.18 20.00 4”NPT 9.53 3.94 0.51 11.81 13.78 30.23 18.50 0.98 8.03 0.20 M8 15.35 21.89 15.24 12.76 0.63
45°
q
d1
w
y
I1
d
b
e
f
a
I2
G
c
s
3x120°øu
q
G
o
p1
H
p2
x
z
t
n r
øm
REGENERATIVE BLOWERS - PRESSURE
SCL K07 / K08 / K09 / K10 / K11 / K12TD SERIES
SN 1830-10 1/2
®
- For proper use, the blower should be equipped with inlet filter and safety valve; other accessories available on request.- Ambient temperature from +5°to +104°F.- Specifications subject to change without notice.
TECHNICAL CHARACTERISTICS- Aluminium alloy construction- Smooth operation- High efficiency impeller- Maintenance free
- Mountable in any position- Recognized TEFC - cURus motor- G1/8” female thread on both suction
and discharge silencer port flanges
OPTIONS- Special voltages (IEC 38)- Surface treatments
ACCESSORIES- Inlet and/or inline filters- Additional inlet/outlet silencers- Safety valves- Flow converting device- Optional connectors
Dimensions in inches.
Dimension for reference only.
FPZ, Inc150 N. Progress DriveSaukville, WI 53080 - U.S.A. Tel. (262) 268-0180Fax (262) 268-0415E-mail usa@fpz.com
G 1/8”
G 1/8”
8/18/2019 Catalogo FPZ
19/88
C A P A C I T Y
A B S O R B E D P O W E R
T E M P E R A T U R E
I N C R E A S E
REGENERATIVE BLOWERS - PRESSURE
SCL K07 / K08 / K09 / K10 / K11 / K12TD SERIES
SN 1830-10 2/2
®
Curves refer to air at 68°F temperature and 29.92 I n Hg atmospheric pressure (abs) measured at inlet port.Values for flow, power consumption and temperature rise: +/-10% tolerance.Data subject to change without notice.
0
1
2
3
4
5
6
7
8
9
p
p s i g
K10-TD
0
20
40
60
80
100
120
140
160
180
200
260
0
20
40
60
80
100
120
140
°F
I n W G
K07-TD
K08-TD
K09-TD
K11-TD
0
1
2
3
4
5
6
7
8
9
p p s i g
Scfm
15
20
25
100 200 300 400 500 600 700
100
120
140
160
180
200
220
260
0
20
40
60
80
I n W G
7 1/2
10
15
K07-TD
K08-TD
7 1/2
10
15
K09-TD
15
20
25
K10-TD
K11-TD
25
20
800
60 Hz
25
30
0
1
2
3
4
5
6
7
8
9
p p s i g
K10-TD
0
20
40
60
80
100
120
140
160
180
200
260
0 5 10 15 20 Hp
I n W G
K08-TD
K07-TD
25
K09-TD K11-TD
30
K12-TD
K12-TD
60 Hz
60 Hz
K12-TD
0
1
2
3
4
5
6
7
8
9
10
p
p s i g
0
1
2
3
4
5
6
7
8
9
10
p
p s i g
0
20
40
60
80
100
120
140
160
180
200
220
280
0 20 40 60 80 100 120 140 160 180
°F
50 Hz
I n W G
K10-TD
K07-TD
K08-TD
K09-TD
K11-TD
0
1
2
3
4
5
6
7
8
9
10
p p s i g
K10-TD
0
20
40
60
80
100
120
140
160
180
200
220
240
280
0 100 200 300 400 500 600 Scfm
I n W G
K08-TD
K07-TD K09-TD K11-TD
15
20
7 1/2
10
15
7 1/2
10
15
15
20
25
25
20
25
700
25
30
K12-TD
50 Hz
Hp
K12-TD
K10-TD
0
20
40
60
80
100120
140
160
180
200
220
280
0 5 10 15 20
I n W G
K08-TD
K11-TD
25
K07-TD
K09-TD
K12-TD
50 Hz
30
19
8/18/2019 Catalogo FPZ
20/88
STANDARD FEATURES - Low weight cast aluminum construction.- Quiet operation with integral inlet and
outlet muffling.- Recognized TEFC - cURus motor.- High efficiency / low noise impeller
design.- No lubrication / maintenance required.- Allowed ambient: +5 °F to +104 °F.- Mountable in any plane.
OPTIONS - Special voltages.- Surface treatment or plating.- Gas tight sealing.- Special designs available.
ACCESSORIES- Inlet and/or inline filters.
- Additional inlet/outlet silencers.
- Safety valves.- Flow converting devices.- Optionals connectors
DREGENERATIVE BLOWERS - PRESSURE
SCL 06
SN 2673-0 1/2
® FPZ, Inc150 N. Progress DriveSaukville, WI 53080 - U.S.A. Tel. (262) 268-0180Fax (262) 268-0415E-mail usa@fpz.com
Dimensions in inches.Dimension for reference only.
- For proper use, the blower should be equipped with inlet filter and safety valve; other accessories available on request.- Ambient temperature from +5° to +104°F.- Specifications subject to change without notice.
(1) Noise measured at 1 m distance with inlet and outlet ports piped, in accordance to ISO 3744.
ModelMaximum
flowScfm
Installedpower
Hp
Maximumdifferential pressure
p ( In WG)
Noise levelLp dB (A)
(1)
Overalldimensions
H
Weight
60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz
3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm Inches Lbs
1/3 - 36 - 58.7 - 10.60 18.3006 39 32
1/2 1/2 52 36 59.0 58.0 10.60 18.50
“P” version
1”NPT
8.6
3.150.59 1.38
7.6
8.7
7.10
2.95ø 0.43
H
1.06
M5
5.35 DIA
4.64
4.56
4.37
3.38
4.13
M5
20
06 SERIES
8/18/2019 Catalogo FPZ
21/88
Curves refer to air at 68°F temperature and 29.92 In Hg atmospheric pressure (abs) measured at inlet port.Values for flow, power consumption and temperature rise: +/-10% tolerance.Data subject to change without notice.
A B S O R B E
D P O W E R
T E M P E R A T U R E I N
C R E A S E
REGENERATIVE BLOWERS - PRESSURE
SCL 06
SN 2673-0 2/2
®
C A P A C I T Y
I n W G
60
0
10
20
30
40
0 0.1 Hp0.2 0.3 0.4 0 5
60 Hz
0
1 0
2.0
p
p s i g
1.5
0 5
0
10
20
40
I n W G
30
0 Scfm10 20 30 40
50 Hz
1/2 p
p s i g
1.0
0
0.5
40
0 30 50 60 80 °F
0
10
20
I n W G
60 Hz
20
30
10 40 70
60
90 100
0
1 0
2.0
p
p s i g
1.5
0,5
I n W G
0
10
20
40
30
Hp
50 Hz
0 0 05 0 1 0 15 0 2 0 30.25
p
p s i g
p
p s i g
1.0
0
0.5
40
0
10
20
I n W G
30
0 30 50 60 80 °F
50 Hz
2010 40 70
1.0
0
0.5
p
p s i g
p
p s i g
p
p s i g
0
1.0
2.0
1.5
0.5
Scfm
0
10
20
30
40
50
60
I n W G
0 10 20 30 40
60 Hz
1/2
1/3
06 SERIES
. . . . ..
8/18/2019 Catalogo FPZ
22/88
D
ModelMaximum
flowScfm
Installedpower
Hp
Maximumdifferential pressure
p ( In WG)
Noise levelLp dB (A)
(1)
Overalldimensions
H
Weight
60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz
3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm Inches Lbs
1/3 1/3 60 65 63.7 61.7 12.20 21.8010DL 21 18
1/2 1/2 96 73 64.0 62.0 12.76 23.50
3/4 3/4 98 105 63.7 61.7 14.25 32.5015DH 35 29
1 1 120.5 120.5 64.0 62.0 15.75 40.00
REGENERATIVE BLOWERS - PRESSURE
SCL 10DL / 15DH
SN 2197-2 1/2
® FPZ, Inc150 N. Progress DriveSaukville, WI 53080 - U.S.A. Tel. (262) 268-0180Fax (262) 268-0415E-mail usa@fpz.com
STANDARD FEATURES - Low weight cast aluminum construction.- Quiet operation with integral inlet and outlet
muffling.
-Recognized TEFC - cURus motor.
- High efficiency / low noise impeller design.- No lubrication / maintenance required.- Allowed ambient: +5 °F to +104 °F.- Mountable in any plane.
OPTIONS - Remote drive models (belt or coupling).- Special voltages.- Surface treatment or plating.- Gas tight sealing.- Special designs available.
ACCESSORIES- Inlet and/or inline filters.- Additional inlet/outlet silencers.
- Safety valves.- Flow converting devices.- Optionals connectors
Model a b c d e f G I m n o r s
10DL 8.66 10.08 9.06 0.91 8.27 7.09 1/2" NPT 2.28 0.35 4.72 5.67 3.54 0.10
15DH 9.84 11.26 10.16 1.18 8.27 7.09 3/4" NPT 2.52 0.35 4.72 5.67 4.72 0.10
d
G
r n
o
H
l
a
øm
f
e
b
c
s
Dimensions in inches.Dimension for reference only.
- For proper use, the blower should be equipped with inlet filter and safety valve; other accessories available on request.- Ambient temperature from +5° to +104°F.- Specifications subject to change without notice.
(1) Noise measured at 1 m distance with inlet and outlet ports piped, in accordance to ISO 3744.
DH SERIES
22
8/18/2019 Catalogo FPZ
23/88
Curves refer to air at 68°F temperature and 29.92 In Hg atmospheric pressure (abs) measured at inlet port.Values for flow, power consumption and temperature rise: +/-10% tolerance.Data subject to change without notice.
A B S O R B
E D P O W E R
T E M P E R A T U R E
I N C R E A S E
REGENERATIVE BLOWERS - PRESSURE
SCL 10DL / 15DH
SN 2197-2 2/2
®
C A P A C I T Y
p
p s i g
0
1
2
3
4
5
p
p s i g
0
1
2
3
4
5
Hp0 0,2 0,4 0,6 0,8 1
I n W G
0
20
40
60
80
100
140
10DL
15DH
50 Hz
p
p s i g
0
1
2
3
4
5
0
p
p s i g
1
2
3
4
5
0
20
40
60
80
100
120
140
I n W G
0 Scfm10 20 40 30
60 Hz
1
3/41/2
10DL
15DH
I n W G
0
20
40
60
80
100
140
0 0,2 Hp0,4 0,6 0,8 1
60 Hz
10DL15DH
p
p s i g
0
1
2
3
4
5
p
p s i g
1
2
3
4
5
0
1/2
0
20
40
60
80
100
120
140
I n W G
0 Scfm10 20 30 40
50 Hz
1
3/4
15DH
10DL
0 20 40 60 80 100 °F
0
20
40
60
80
100
140
I n W G
15DH
10DL
50 Hz
°F
0
20
40
60
80
100
140
I n W G
0 20 40 60 80 100
60 Hz
15DH
10DL
1/3
1/2
0
20
40
60
80
100
120
140
I n W G
0 Scfm10 20 30 40
50 Hz
1
3/4
15DH
10DL
1/3
DH SERIES
2
8/18/2019 Catalogo FPZ
24/88
D
- For proper use, the blower should be equipped with inlet filter and safety valve; other accessories available on request.- Ambient temperature from +5° to +104°F.- Specifications subject to change without notice.
Model MaximumflowScfm
InstalledpowerHp
Maximumdifferential pressure
p ( In WG)
Noise levelLp dB (A)
(1)
OveralldimensionsH
Weight
60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz
3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm Inches Lbs
20DH 48 42 1 ½ 1 ½ 143 140 68.0 65.0 13.78 47.30
2 2 140 161 69.7 67.7 15.36 58.3030DH 70 61
3 - 191 - 70.0 68.0 15.36 64.90
3 3 151 156 74.7 71.7 16.93 75.0040DH 98 85
4 4 201 201 75.0 72.0 16.93 83.80
(1) Noise measured at 1 m distance with inlet and outlet ports piped, in accordance to ISO 3744.
REGENERATIVE BLOWERS - PRESSURE
SCL 20DH / 30DH / 40DH
SN 2464-2 1/2
® FPZ, Inc150 N. Progress DriveSaukville, WI 53080 - U.S.A. Tel. (262) 268-0180Fax (262) 268-0415E-mail usa@fpz.com
STANDARD FEATURES - Low weight cast aluminum construction.- Quiet operation with integral inlet and outlet
muffling.- Recognized TEFC - cURus motor.- High efficiency / low noise impeller design.- No lubrication / maintenance required.- Allowed ambient: +5 °F to +104 °F.- Mountable in any plane.
OPTIONS - Remote drive models (belt or coupling).- Special voltages.- Surface treatment or plating.- Gas tight sealing.- Special designs available.
ACCESSORIES- Inlet and/or inline filters.
- Additional inlet/outlet silencers.
- Safety valves.- Flow converting devices.- Optionals connectors
Dimensions in inches.Dimension for reference only.
Model a b c d e f G I m n o p1 q r s t u z
20DH 11.42 12.20 6.50 1.77 9.06 8.27 1” ¼ NPT 3.54 0.39 5.90 7.67 13.98 0.71 1.77 0.79 M6 5.91 0.31
30DH 12.60 13.66 7.36 2.09 10.63 9.64 1” ½ NPT 4.13 0.39 7.28 9.25 16.54 0.71 2.17 0.79 M6 7.09 0.67
40DH 13.78 14.57 7.68 2.09 10.63 9.65 1” ½ NPT 4.13 0.39 7.28 9.25 17.32 0.71 2.17 0.79 M8 8.86 -
sl
G
d
c
a
f
e
b
r
øm
p1
o
n
q
H
3x120°
øu
t
z
DH SERIES
24
8/18/2019 Catalogo FPZ
25/88
Curves refer to air at 68°F temperature and 29.92 In Hg atmospheric pressure (abs) measured at inlet port.Values for flow, power consumption and temperature rise: +/-10% tolerance.Data subject to change without notice.
C A P A C I T Y
A B S O R B E
D P O W E R
T E M P E R A T U R E I N
C R E A S E
REGENERATIVE BLOWERS - PRESSURE
SCL 20DH / 30DH / 40DH
SN 2464-2 2/2
®
p
p s i g
0
1
2
3
4
5
6
7
0
20
40
60
80
100
120
140
160
180
220
0 Scfm
I n W G
20 40 60 80 100 120
60 Hz
1 1/2
3
2
30DH
20DH
3
4
40DH
p
p s i g
0
1
2
3
4
5
6
7
I n W G
0
20
40
60
80
100
120
140
160
220
Hp
50 Hz
30DH20DH
0 0.5 1 1 5 2 2 5 3 3 5 4
40DH
p
p s i g
0
1
2
3
4
5
6
7
0
20
40
60
80
100
120
140
160
220
0 20 40 60 80 100 120 140 160 180 °F
I n W G
50 Hz
20DH
30DH
40DH
p
p s i g
0
1
2
3
4
5
6
7
I n W G
0
20
40
60
80
100
120
140
160
220
0 0.5 1 Hp
60 Hz
1.5 2 2.5 3 3.5 4
20DH
30DH 40DH
p
p s i g
0
1
2
3
4
5
6
7
0
20
40
60
80
100
120
140
160
220
0 20 40 60 80 100 120 140 160 180 °F
I n W G
60 Hz
30DH
20DH
40DH
p
p s i g
0
1
2
3
4
5
6
7
0
20
40
60
80
100
120
140
160
180
220
0 Scfm
50 Hz
I n W G
20 40 60 80 100
1 1/2
30DH
20DH
2
4
3
40DH
DH SERIES
. . .
8/18/2019 Catalogo FPZ
26/88
TECHNICAL CHARACTERISTICS- Aluminium alloy construction- Smooth operation- High efficiency impeller- Maintenance free
- Mountable in any position
OPTIONS- Special voltages (IEC 38)- Surface treatments
ACCESSORIES- Inlet and/or inline filters- Additional inlet/outlet silencers- Safety valves- Flow converting device- Optional connectors
ModelMaximum
flowScfm
Installedpower
Hp
SizeMaximum
differential pressure
p ( In WG )
Noise levelLp dB (A)
(1)
Weight(2)
60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz Lbs
3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm GOR GVR
3/4 NEMA 56C 64 62.0K03-MS 52 43
1 NEMA 56C 8060
62.360.0 22.00 17.60
1 ½ NEMA 56C 58 80 64.8 62.8
2
NEMA 56C 85 65.0K04-MS
9881
3 NEMA 56C 10090
65.263.0 27.60 22.00
2 NEMA 143-5TC 52 70 70.5 68.5
NEMA 143-5TC35.00 28.00
3 NEMA 182-4TC
90 110 70.8 68.8K05-MS 156 129
5 NEMA 182-4TC 130 120 71.1 69.134.50 27.00
NEMA 143-5TC 46.00 38.403
NEMA 182-4TC50 65 73.0 71.0
5 NEMA 182-4TC 85 110 73.6 71.6K06-MS 216 179
7 ½ NEMA 182-4TC 140 135 73.9 71.9
40.80 38.00
(1) Noise measured at 1 m distance with inlet and outlet ports piped, in accordance to ISO 3744.(2) Value is refered to weight of the machine without electric motor.
REGENERATIVE BLOWERS - PRESSURE
SCL K03 / K04 / K05 / K06MS SERIES - GOR/GVR RANGE
SN 2580-0 1/2
® FPZ, Inc150 N. Progress DriveSaukville, WI 53080 - U.S.A. Tel. (262) 268-0180Fax (262) 268-0415E-mail usa@fpz.com
- For proper use, the blower should be equipped with inlet filter and safety valve; other accessories available on request.- Ambient temperature from +5° to +104°F.- Specifications subject to change without notice.
For dimensions, please refer to drw:
-- GGOORR range: SSII 11885522 -- GGVVRR range: SSII 11994466
GOR Range GVR Range
SCL Kxx-MS GOR-A SCL Kxx-MS GOR-C
26
8/18/2019 Catalogo FPZ
27/88
C A P A C I T Y
A B S O R B E D P O W E R
T E M P E R A T U R E I N C
R E A S E
REGENERATIVE BLOWERS - PRESSURE
SCL K03 / K04 / K05 / K06MS SERIES - GOR/GVR RANGE
SN 2580-0 2/2
®
Curves refer to air at 68°F temperature and 29.92 In Hg atmospheric pressure (abs) measured at inlet port.Values for flow, power consumption and temperature rise: +/-10% tolerance.Data subject to change without notice.
K05-MS K06-MS K04-MS K03-MS
0
20
40
60
80
100
120
160
I n W G
3
3/4
1
1 1/2
2
3
2
5
3
5
7 1/2
0 50 100 150 200 250 Scfm
60 Hz
140
0
1
2
3
4
5 p
p s i g
K06-MS
K05-MS
K04-MS
K03-MS
0
20
40
60
80
100
160
I n W G
120
0 1 2 3 4 5 6 7 Hp
60 Hz
0
1
2
3
4
5 p
p s i g
0 20 40 60 80 100 120 140 °F
0
20
40
60
80
100
160
I n W G
K06-MS
K04-MS
K03-MS
K05-MS 120
60 Hz
0
1
2
3
4
5 p
p s i g
0
1
2
3
4
5 p
p s i g
I n W G
0
20
40
60
80
100
120
140
160
0 50 100 150 200 Scfm
50 Hz
5
3
3
7 1/2
5
1 1/2
2
3/4
2
K03-MS K04-MS K05-MS K06-MS
0
1
2
3
4
5
p
p s i g
I n W G
0
20
40
60
80
100
120
160
0 1 2 3 4 5 6
50 Hz
Hp
K05-MS
K06-MS
K04-MS
K03-MS
0
1
2
3
4
5
p
p s i g
0 20 40 60 80 100 120 140 160 180 200 °F
I n W G
0
20
40
60
80
100
120
16050 Hz
K05-MS K06-MS
K04-MS
K03-MS
8/18/2019 Catalogo FPZ
28/88
Model
MaximumflowScfm
Installedpower
HpSize
Maximumdifferential pressure
p ( In WG )
Noise levelLp dB (A) (1)
Weight(2)
60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz
3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm Lbs
5 NEMA 182-4TC 70 86 79.0 77.0 110.50
NEMA 182-4TC 110.507 ½
NEMA 213-5TC130 79.3
110.50K07-MS 294 243
10 NEMA 213-5TC 170
140
79.6
77.3
110.50
5 NEMA 182-4TC 38 52 79.7 77.7 127.00
NEMA 182-4TC 127.007 ½
NEMA 213-5TC 90 80.0 78.0
127.00
10 NEMA 213-5TC 115 125 80.3 78.3 127.00
NEMA 213-5TC 127.00
K08-MS 381 316
15NEMA 254-6TC
170 160 80.6 78.6130.60
NEMA 182-4TC 133.407 ½
NEMA 213-5TC50 63 80.2 78.2
133.40
10 NEMA 213-5TC 80 95 80.5 78.5 133.40
NEMA 213-5TC 133.4015
NEMA 254-6TC 140 155 81.0 79.0
137.00
K09-MS 471 390
20 NEMA 254-6TC 180 170 81.3 79.3 137.00
NEMA 182-4TC 147.307 ½
NEMA 213-5TC30 50 80.1 78.1
147.30
10 NEMA 213-5TC 60 80 80.5 78.5 147.30
NEMA 213-5TC 147.3015
NEMA 254-6TC110 135 81.0 79.0
151.00
20 NEMA 254-6TC 160 81.4 151.00
K10-MS 556 460
25 NEMA 284-6TSC 200190
81.679.4
147.30
10 NEMA 213-5TC 40 53 82.0 80.0 170.00
NEMA 213-5TC 170.0015NEMA 254-6TC
80 97 82.4 80.4176.40
20 NEMA 254-6TC 125 140 82.7 80.7 176.40
25 NEMA 284-6TSC 160 85.6 170.00
K11-MS 650 539
30 NEMA 284-6TSC 200190
86.083.6
170.00
NEMA 213-5TC 177.7015
NEMA 254-6TC52 90 82.9 80.9
184.10
20 NEMA 254-6TC 85 130 83.2 81.2 184.10
25 NEMA 284-6TSC 120 86.1 177.70
30 NEMA 284-6TSC 150 86.5 177.70
K12MS 726 602
40 NEMA 324-6TSC 180
170
86.9
84.1
193.20
TECHNICALCHARACTERISTICS- Aluminium alloy construction- Smooth operation- High efficiency impeller- Maintenance free
- Mountable in any position
OPTIONS- Special voltages (IEC 38)- Surface treatments
ACCESSORIES- Inlet and/or inline filters- Additional inlet/outlet silencers- Safety valves- Flow converting device- Optional connectors
- For proper use, the blower should be equipped with inlet filter and safety valve; other accessories available on request.- Ambient temperature from +5° to +104°F.- Specifications subject to change without notice.
(1) Noise measured at 1 m distance with inlet and outlet ports piped, in accordance to ISO 3744.(2) Value is refered to weight of the machine without electric motor
REGENERATIVE BLOWERS - PRESSURE
SCL K07 / K08 / K09 / K10 / K11 / K12MS SERIES - GOR/GVR RANGE
SN 2134-2S1/2
® FPZ, Inc150 N. Progress DriveSaukville, WI, 53080 - U.S.A. Tel. (262) 268-0180Fax (262) 268-0415E-mail usa@fpz.com
GOR Range
SCL Kxx-MS GOR-C
SCL Kxx-MS GOR-A SCL Kxx-MS GOR-B
GVR Range
For dimensions, please refer to drw:
GGOORR range: SSII 11887733 GGVVRR range: SSII 11992200
28
68
8/18/2019 Catalogo FPZ
29/88
-
Curves refer to air at 68°F temperature and 29.92 In Hg atmospheric pressure (abs) measured at inlet port.Values for flow, power consumption and temperature rise: +/-10% tolerance.Data subject to change without notice.
C A P A C I T Y
A B S O R B E
D P O W E R
T E M P E R A T U R E I N
C R E A S E
REGENERATIVE BLOWERS - PRESSURE
SCL K07 / K08 / K09 / K10 / K11 / K12MS SERIES - GOR/GVR RANGE
SN 2134-2S 2/2
®
p p s i g
0
1
2
3
4
5
6
7
K11-MS
K08-MS
K09-MS
K10-MS
K07-MS
60 Hz
0
20
40
60
80
100
120
140
160
I n W G
220
Hp0 10 15 25 305 20
K12-MS
0
20
40
60
80
100
120
140
160
180
I n W G
220
0 100 200 300 400 Scfm700500 600
K08-MS
K09-MS K07-MS
K10-MS
15
10
10
20 25
20
15
20
7 1/2
10
7 1/2
10
K11-MS
5 7 1/2
15
15
5
7 1/2
K12-MS
25
20
15
50 Hz
0
1
2
3
4
5
6
7
p p s i g
0
20
40
60
80
100
120
220
I n W G
140
160
Hp0 10 15 255 20
K07-MS
K11-MS
K08-MS K10-MS K12-MS
K09-MS
50 Hz
p p s i g
0
1
2
3
4
5
6
7
p p s i g
0
1
2
3
4
5
6
7
0
20
40
60
80
100
120
140
160
220
I n W G
50 Hz
K09-MS
K12-MS
K08-MSK10-MS
K11-MS
0 20 40 60 80 100 120 140 160 180 °F
K07-MS
p p s i g
0
1
2
3
4
5
6
7
K09-MS
K07-MS
K08-MS
K10-MS
K11-MS
0 20 40 60 80 100 120 140 160 °F180
0
20
40
60
80
100
120
140
I n W G
160
220 60 Hz
K12-MS
0
1
2
3
4
5
6
7
p p s i g
0
20
40
60
80
100
120
140
180
I n W G
160
220
400100 200 300 500 Scfm700 8000 600
K08-MS
K07-MS K09-MS
K10-MS
10 15
5
7 1/2
10
5
7 1/2
10
20
15
7 1/2
10
15
20
25 30
25
20
15
10
K11-MS
K12-MS
15
20
30
40
60 Hz
7 1/2
25
2
8/18/2019 Catalogo FPZ
30/88
- For proper use, the blower should be equipped with inlet f ilter and safety valve; other accessories available on request.- Ambient temperature from +5° to +104°F.- Specifications subject to change without notice.
(1) Noise measured at 1 m distance with inlet and outlet ports piped, in accordance to ISO 3744.(2) Value is refered to weight of the machine without electric motor.
REGENERATIVE BLOWERS - PRESSURE
SCL K05 / K06TS SERIES - GOR/GVR RANGE
SN 2686-0 1/2
® FPZ, Inc150 N. Progress DriveSaukville, WI 53080 - U.S.A.
Tel. (262) 268-0180Fax (262) 268-0415E-mail usa@fpz.com
For dimensions, please refer to drw:
-- GGOORR range: SSII 22112233 -- GGVVRR range: SSII 22113355
Model
Maximum
flowm³/h
Installed
powerHp
Size
Maximum
differential pressure p ( in WG )
Noise level
Lp dB (A) (1)
Weight
(2)
60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz Lbs
3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm GOR GVR
5.0 60 85 75.5 73.5K05-TS 290 241
7.5NEMA 182-4TC
100 110 77.5 75.572.75 68.35
7.5 55 77 77.5 75.5
10 80 110 77.8 75.8K06-TS 400 331
15
NEMA 213-5TC
130 120 78.4 76.4
112.45 108.00
TECHNICAL CHARACTERISTICS- Aluminium alloy construction- Smooth operation- High efficiency impeller- Maintenance free
-Mountable in any plane
- G1/8'' female thread on both suctionand discharge silencer port flanges.
OPTIONS- Special voltages (IEC 38)- Surface treatments
SCL Kxx-TS GOR-C
G 1/8”
GVR RangeGOR Range
G 1/8”
SCL Kxx-TS GOR-A SCL Kxx-TS GOR-B SCL Kxx-TS GOR-C
30
ACCESSORIES
- Inlet and/or inline filters- Additional inlet/outlet silencers- Safety valves- Flow converting device- Optional connectors
8/18/2019 Catalogo FPZ
31/88
REGENERATIVE BLOWERS - PRESSURE
SCL K05 / K06TS SERIES - GOR/GVR RANGE
SN 2686-0 2/2
®
C A P A C I T Y
A B S O R B E D
P O W E R
T E M P E R A T U R E I N C R E A S E
Curves refer to air at 68°F temperature and 29.92 In Hg atmospheric pressure (abs) measured at inlet port.Values for flow, power consumption and temperature rise: +/-10% tolerance.Data subject to change without notice.
K05-TS
K06-TS
0 20 40 60 80 °F
0
20
40
60
140
I n W G
60 Hz
K06-TS
50 Hz
0 20 40 80 140 °F60 100 120
K05-TS
80
100
100 120
0
20
40
60
80
120
0
1
2
3
4
5
0
1
2
3
4
5
p
p s i g
p
p s i g
p
p s i g
60 Hz
0
20
40
60
140
0 1 2 3 4 5 6 7 8 Hp
I n W G
9 10
K05-TS
K06-TS
0
1
2
3
4
5
80
100
60 Hz
I n W G
0
20
40
60
140
0 100 200 300 400 Scfm
K05-TS
5
K06-TS
7 1/2
0
1
2
3
4
5
80
100
120
7 1/2
15
10
50 Hz
I n W G
0
20
40
60
140
0 100 200 300 400 Scfm
K05-TS
5
K06-TS
7 1/2
0
1
2
3
4
5
80
100
120
7 1/2
15
10
50 150 250 350
p
p s i g
50 Hz
0
20
40
60
140
0 1 2 3 4 5 6 7 8 Hp
I n W G
9 10
K05-TS
K06-TS
0
1
2
3
4
5
80
100
100
140
11 12 13 14 15
500
p
p s i g
p
p s i g
3
8/18/2019 Catalogo FPZ
32/88
ModelMaximum
flowScfm
Installedpower
HpSize
Maximumdifferential pressure
∆∆∆∆p ( In WG )
Noise levelLp dB (A)
(1)
Weight(2)
60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz
3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpmLbs
NEMA 182-4TC 36 60 83.9 81.9 160.907 ½
NEMA 213-5TC 36 60 83.9 81.9 160.90
10 NEMA 213-5TC 60 90 84.2 82.2 160.90
NEMA 213-5TC 110 140 84.8 82.8 160.9015
NEMA 254-6TC (3) 110 140 84.8 82.8 167.60
K07-TS 588 487
20 NEMA 254-6TC (3) 140 140 85.3 82.8 167.60
10 NEMA 213-5TC 37 64 80.9 78.9 172.00NEMA 213-5TC 75 105 83.3 81.3 172.00
15NEMA 254-6TC (3) 75 105 83.3 81.3 180.80
20 NEMA 254-6TC(3)
100 150 84.6 82.6 180.80
K08-TS 715 592
25 NEMA 284-6TSC(3)
140 150 86.0 82.6 174.20
NEMA 213-5TC 52 75 83.0 81.0 202.8015
NEMA 254-6TC (3) 52 75 83.0 81.0 208.30
20 NEMA 254-6TC(3)
80 108 85.0 83.0 208.30
25 NEMA 284-6TSC (3) 110 145 87.0 85.0 205.00
30 NEMA 284-6TSC (3) 120 160 89.0 87.0 205.00
K09-TS 941 780
40 NEMA 324-6TSC (3) 150 160 91.0 87.0 220.50
NEMA 213-5TC 41 64 87.8 85.8 209.4015
NEMA 254-6TC (3) 41 64 87.8 85.8 216.10
20 NEMA 254-6TC(3)
65 90 88.1 86.1 216.10
25 NEMA 284-6TSC (3) 80 110 88.4 86.4 211.60
30 NEMA 284-6TSC (3) 100 140 88.7 86.7 211.60
K10-TS 1093 906
40 NEMA 324-6TSC(3)
150 160 89.0 87.0 227.10
25 NEMA 284-6TSC 50 88 89.4 87.4 251.30
30 NEMA 284-6TSC 70 110 90.0 88.0 251.30
40 NEMA 324-6TSC (3) 100 155 90.6 88.6 269.00K11-TS 1254 1039
50 NEMA 324-6TSC(3)
140 155 91.2 88.6 269.00
30 NEMA 284-6TSC 45 80 90.6 88.6 249.10
40 NEMA 324-6TSC (3) 70 120 91.2 89.2 266.80K12-TS 1410 1168
50 NEMA 324-6TSC(3)
110 150 91.8 89.8 266.80
TECHNICALCHARACTERISTICS- Aluminium alloy construction- Smooth operation- High efficiency impeller- Maintenance free
- Mountable in any position
- G1/8” female thread on bothsuction and discharge silencerport flanges
OPTIONS- Special voltages (IEC 38)- Surface treatments
ACCESSORIES- Inlet and/or inline filters- Additional inlet/outlet silencers- Safety valves- Flow converting device- Optional connectors
- For proper use, the blower should be equipped with inlet filter and safety valve; other accessories available on request.- Ambient temperature from +5°to +104°F.- Specifications subject to change without notice.
(1) Noise measured at 1 m distance with inlet and outlet ports piped, in accordance to ISO 3744.(2) Value is refered to weight of the machine without electric motor(3) Not applicable on SCL Kxx - GVR
For dimensions, please refer to drw:
GGOORR range: SSII 11887799 GGVVRR range: SSII 11888800
REGENERATIVE BLOWERS - PRESSURE
SCL K07 / K08 / K09 / K10 / K11 /K12TS SERIES - GOR/GVR RANGE
SN 2164-3 1/2
® FPZ, Inc150 N. Progress DriveSaukville, WI, 53080 - U.S.A. Tel. (262) 268-0180Fax (262) 268-0415E-mail usa@fpz.com
SCL Kxx-TS GOR-A SCL Kxx-TS GOR-B
SCL Kxx-TS GOR-C
GOR RANGE GVR RANGE
G 1/8”
G 1/8”
32
8/18/2019 Catalogo FPZ
33/88
8/18/2019 Catalogo FPZ
34/88
ModelMaximum
flowScfm
Installedpower
HpSize
Maximumdifferential pressure
p ( In WG )
Noise levelLp dB (A)
(1)
Weight(2)
60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz
3500 rpm 2900 rpm 3500 rpm 2900 rpm 3500 rpm 2900 rpm Lbs
NEMA 56C 112.003
NEMA 143-5TC68 87 73.5 71.5
112.00
5 NEMA 182-4TC 145 170 74.5 72.5 113.80
NEMA 182-4TC 113.80
K07R-MD 129 107
7 ½NEMA 213-5TC
250 260 75.0 73.0113.80
5 NEMA 182-4TC 80 110 76.2 74.2 130.30
NEMA 182-4TC 130.307 ½
NEMA 213-5TC160 185 76.6 74.6
130.30
10 NEMA 213-5TC 220 250 77.0 75.0 130.30
K08R-MD 168 139
Recommended