CERTIFICATE - Everlight Europe GmbH › img › cms › Safety_Certs › NEMKOP112… · Nemko AS...

CERTIFICATENo. P11214766/A4

Order No. 257167 Page 1/24

Date of issue 08-04-2014

Eunhye SongCertification Department

Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com

Product Optocoupler

Applicant Everlight Electronics Co., Ltd.No.6-8, Zhonghua Rd., Shulin Dist., New Taipei City23860Taiwan

Manufacturer Everlight Electronics Co., Ltd.No.6-8, Zhonghua Rd., Shulin Dist., New Taipei City23860Taiwan

Factory Everlight Electronic (China) Co., Ltd.No. 2135 Zhong Shan North Rd. Wujiang EconomyDevelopment Zone (Yun Xi Area), Songling Town,Wujiang City, Jiang SuChina

See next page(s)

Ratings 250Vrms

Trade mark EVERLIGHT

Model / Type Ref. 4N5X.

Principal characteristics HIGH VOLTAGE PHOTOTRANSISTORMinimum external creepage distance is measured to 7.7mm, minimum internalcreepage distance is measured to 5.5mm and minimum distance throughinsulation is measured to 0.5mm. Tested for reinforced insulation.X = Part no. (0, 1, 2, 3, 4, 5, 6, 7, 8, 9) Tested for reinforced insulation. Thermalcycling test, 10 cycles. Each cycle: 68h in 100 degree C, 1h in 25degree C, 2hin 0 degree C and 1h in 25 degree C. After the cycling test a humidity test for48h in 93% relative humidity. Electric strength test between input and output4800Vac/1 minute.The symbol “.” in type designation may be blank, A~Z ornumbers, and denote different pin shape.Maximum operating temperature: 100°C

See next page(s)

A sample of the product was testedand found to be in conformity with

TRON EN 60065:2002;A1;A11;A2;A12IEC 60065(ed.7);am1;am2

OFF EN 60950-1:2006;A11;A1;A12;A2IEC 60950-1(ed.2);am1;am2

LITE EN 61347-1:2008;A1IEC 61347-1(ed.2);am1

HOUS EN 60335-1:2012IEC 60335-1(ed.5)

Replaces This certificate replaces previous certificate No. P11214766/A3, due to updating of standard.

Validity This certificate documents conformity with the standards shown, and also applies as license foruse of Nemkos name and certification mark. The certificate and license is valid as long as theapplicable conditions are complied with, and provided that any changes to the product are notifiedto Nemko for acceptance prior to implementation.New standards or amendments to the standards may imply that the product design must beupdated and/or that re-testing and re-certification is necessary.

Additional information See next page(s)

Additional model(s) See next page(s)

Product Optocoupler

Pos. No 1Model / Type Ref. EL0601.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics SINGLE CHANNEL HIGH SPEED LOGIC GATE

Minimum external creepage distance is measured to 4.4mm, minimuminternal creepage distance is measured to 3.5mm and minimumdistance through insulation is measured to 0.4mm. Tested for basic andsupplementary insulation. Thermal cycling test, 10 cycles. Each cycle: 68hin 100 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C.After the cycling test a humidity test for 48h in 93% relative humidity. Electricstrength test between input and output 2400Vac/1 minute.The symbol “.” intype designation may be blank, A~Z or numbers, and denote different pinshape.Maximum operating temperature: 100 degrees C

Product Optocoupler

Pos. No 3Model / Type Ref. EL0700.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics SINGLE CHANNEL SPLIT DARLINGTON

Product Optocoupler

Pos. No 4Model / Type Ref. EL050L.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics SINGLE CHANNEL HIGH SPEED TRANSISTOR

Product Optocoupler

Pos. No 5Model / Type Ref. EL060L.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics SINGLE CHANNEL HIGH SPEED LOGIC GATE

Product Optocoupler

Pos. No 6Model / Type Ref. EL0701.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics SINGLE CHANNEL SPLIT DARLINGTON

Product Optocoupler

Pos. No 7Model / Type Ref. EL101X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics OPTOCOUPLER

Minimum external creepage distance is measured to 8.1mm, minimuminternal creepage distance is measured to 5.2mm and minimum distancethrough insulation is measured to 0.4mm. Tested for reinforced insulation.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute. Tested for 5 000 m.The symbol “.” intype designation may be blank, A~Z or numbers, and denote different pinshape.Maximum operating temperature: 110 degrees CThe symbol “X” in type denotes X = Part no. (0,1,2,3,4,5,6,7,8,9)

Product Optocoupler

Pos. No 8Model / Type Ref. EL357L.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics OPTOCOUPLER

Minimum external creepage distance is measured to 8.1mm, minimuminternal creepage distance is measured to 5.2mm and minimum distancethrough insulation is measured to 0.4mm. Tested for reinforced insulation.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute.The symbol “.” in type designation maybe blank, A~Z or numbers, and denote different pin shape.Maximum operating temperature: 110 degrees C

Product Optocoupler

Pos. No 9Model / Type Ref. EL355L.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics PHOTODARLINGTON

Product Optocoupler

Pos. No 10Model / Type Ref. EL354L.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics OPTOCOUPLER(AC Type)

Product Optocoupler

Pos. No 11Model / Type Ref. EL0661.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics DUAL CHANNEL HIGH SPEED LOGIC GATE

Product Optocoupler

Pos. No 12Model / Type Ref. ELD205.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Dual channel Optocoupler.

Minimum external creepage distance is measured to 4.4mm, minimuminternal creepage distance is measured to 3.5mm and minimumdistance through insulation is measured to 0.4mm.Tested for basic andsupplementary insulation. Thermal cycling test, 10 cycles. Each cycle: 68hin 110 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C.After the cycling test a humidity test for 48h in 93% relative humidity. Electricstrength test between input and output 2400Vac/1 minute.The symbol “.” intype designation may be blank, A~Z or numbers, and denote different pinshape.Maximum operating temperature:110 degrees C.

Product Optocoupler

Pos. No 15Model / Type Ref. EL061A.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics SINGLE CHANNEL HIGH SPEED LOGIC GATE

Product Optocoupler

Pos. No 16Model / Type Ref. EL061N.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics SINGLE CHANNEL HIGH SPEED LOGIC GATE

Product Optocoupler

Pos. No 17Model / Type Ref. CNY171-X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Minimum external creepage distance is measured to 7.7mm, minimum

internal creepage distance is measured to 6.0mm and minimum distancethrough insulation is measured to 0.5mm. Tested for reinforced insulation.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute.The symbol “.” in type designation maybe blank, A~Z or numbers, and denote different pin shape.Maximum operating temperature: 110 degrees CThe symbol “X” in type denotes X = Part no. (1,2,3,4)

Product Optocoupler

Pos. No 18Model / Type Ref. CNY17F1-X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Minimum external creepage distance is measured to 7.7mm, minimum

internal creepage distance is measured to 6.0mm and minimum distancethrough insulation is measured to 0.5mm. Tested for reinforced insulation.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute.The symbol “.” in type designation maybe blank, A~Z or numbers, and denote different pin shape.Maximum operating temperature: 110 degrees CThe symbol “X” in type denotes X = Part no. (1,2,3,4)

Product Optocoupler

Pos. No 19Model / Type Ref. EL610.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics Minimum external creepage distance is measured to 7.7mm, minimum

internal creepage distance is measured to 6.0mm and minimum distancethrough insulation is measured to 0.5mm. Tested for reinforced insulation.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute.The symbol “.” in type designation maybe blank, A~Z or numbers, and denote different pin shape.Maximum operating temperature: 110 degrees C.

Product Optocoupler

Pos. No 20Model / Type Ref. EL852.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics HIGH VOLTAGE PHOTODARLINGTON

Minimum external creepage distance is measured to 7.7mm, minimuminternal creepage distance is measured to 5.5mm and minimum distancethrough insulation is measured to 0.5mm.Tested for reinforced insulation.Thermal cycling test, 10 cycles. Each cycle: 68h in 100 degree C, 1h in25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute.The symbol “.” in type designation maybe blank, A~Z or numbers, and denote different pin shape.Maximum operating temperature: 100 degrees C.

Product Optocoupler

Pos. No 21Model / Type Ref. EL851.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics HIGH VOLTAGE PHOTOTRANSISTOR.

Minimum external creepage distance is measured to 7.7mm, minimuminternal creepage distance is measured to 5.5mm and minimum distancethrough insulation is measured to 0.5mm.Tested for reinforced insulation.Thermal cycling test, 10 cycles. Each cycle: 68h in 100 degree C, 1h in25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute.The symbol “.” in type designation maybe blank, A~Z or numbers, and denote different pin shape.Maximum operating temperature: 100 degrees C.

Product Optocoupler

Pos. No 22Model / Type Ref. EL073X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics DUAL CHANNEL SPLIT DARLINGTON

Minimum external creepage distance is measured to 4.4mm, minimuminternal creepage distance is measured to 3.5mm and minimumdistance through insulation is measured to 0.4mm. Tested for basic andsupplementary insulation. Thermal cycling test, 10 cycles. Each cycle: 68hin 100 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C.After the cycling test a humidity test for 48h in 93% relative humidity. Electricstrength test between input and output 2400Vac/1 minute.The symbol “.” intype designation may be blank, A~Z or numbers, and denote different pinshape.Maximum operating temperature: 100 degrees CThe symbol “X” in type denotes X = Part no. (0,1)

Product Optocoupler

Pos. No 23Model / Type Ref. EL111X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics OPTOCOUPLER.

Minimum external creepage distance is measured to 8.1mm, minimuminternal creepage distance is measured to 5.2mm and minimum distancethrough insulation is measured to 0.4mm. Tested for reinforced insulation.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute.The symbol “.” in type designation maybe blank, A~Z or numbers, and denote different pin shape.Maximum operating temperature: 110ºCThe symbol “X” in type denotes X = Part no. (0,1,2,3,4,5,6,7,8,9)

Product Optocoupler

Pos. No 24Model / Type Ref. EL161X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics OPTOCOUPLER(AC Type).

Product Optocoupler

Pos. No 25Model / Type Ref. EL151X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics PHOTODARLINGTON.

Product Optocoupler

Pos. No 26Model / Type Ref. ELM301X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics RANDOM PHASE PHOTOTRIAC

Minimum external creepage distance is measured to 5.0mm, minimuminternal creepage distance is measured to 4.0mm and minimum distancethrough insulation is measured to 0.4mm. Tested for reinforced insulation.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute.The symbol “.” in type designation maybe blank, A~Z or numbers, and denote different pin shape.Maximum operating temperature: 110 degrees C.The symbol “X” in type denotes X = Part no. (0,1,2,3,4)

Product Optocoupler

Pos. No 30Model / Type Ref. ELM303X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics ZERO-CROSSING PHOTOTRIAC

Product Optocoupler

Pos. No 33Model / Type Ref. EL053L.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics DUAL CHANNEL HIGH SPEED TRANSISTOR

Product Optocoupler

Pos. No 35Model / Type Ref. EL451.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics HIGH VOLTAGE PHOTOTRANSISTOR

Minimum external creepage distance is measured to 5.0mm, minimuminternal creepage distance is measured to 4.0mm and minimum distancethrough insulation is measured to 0.4mm. Tested for reinforced insulation.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute.The symbol “.” in type designation maybe blank, A~Z or numbers, and denote different pin shape.Maximum operating temperature: 110 degrees C.

Product Optocoupler

Pos. No 36Model / Type Ref. EL452.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics HIGH VOLTAGE PHOTODARLINGTON

Minimum external creepage distance is measured to 5.0mm, minimuminternal creepage distance is measured to 4.0mm and minimum distancethrough insulation is measured to 0.4mm. Tested for reinforced insulation.Thermal cycling test, 10 cycles. Each cycle: 68h in 110 degree C, 1h in25degree C, 2h in 0 degree C and 1h in 25 degree C. After the cycling test ahumidity test for 48h in 93% relative humidity. Electric strength test betweeninput and output 4800Vac/1 minute.The symbol “.” in type designation maybe blank, A~Z or numbers, and denote different pin shape.Maximum operating temperature: 110 degrees C.

Product Optocoupler

Pos. No 37Model / Type Ref. EL0551.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics DUAL CHANNEL HIGH SPEED TRANSISTOR

Product Optocoupler

Pos. No 38Model / Type Ref. EL053X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics DUAL CHANNEL HIGH SPEED TRANSISTOR

Minimum external creepage distance is measured to 4.4mm, minimuminternal creepage distance is measured to 3.5mm and minimumdistance through insulation is measured to 0.4mm. Tested for basic andsupplementary insulation. Thermal cycling test, 10 cycles. Each cycle: 68hin 100 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C.After the cycling test a humidity test for 48h in 93% relative humidity. Electricstrength test between input and output 2400Vac/1 minute.The symbol “.” intype designation may be blank, A~Z or numbers, and denote different pinshape.Maximum operating temperature: 100 degrees CThe symbol “X” in type denotes X = Part no. (0,1,3)

Product Optocoupler

Pos. No 39Model / Type Ref. EL063X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics DUAL CHANNEL HIGH SPEED LOGIC GATE

Minimum external creepage distance is measured to 4.4mm, minimuminternal creepage distance is measured to 3.5mm and minimumdistance through insulation is measured to 0.4mm. Tested for basic andsupplementary insulation. Thermal cycling test, 10 cycles. Each cycle: 68hin 100 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C.After the cycling test a humidity test for 48h in 93% relative humidity. Electricstrength test between input and output 2400Vac/1 minute.The symbol “.” intype designation may be blank, A~Z or numbers, and denote different pinshape.Maximum operating temperature: 100 degrees CThe symbol “X” in type denotes X = Part no. (0,1,L,A,N)

Product Optocoupler

Pos. No 40Model / Type Ref. EL0500.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics SINGLE CHANNEL HIGH SPEED TRANSISTOR

Product Optocoupler

Pos. No 43Model / Type Ref. EL045X.Trade mark (if different from page 1) Rating 250VrmsPrincipal characteristics SINGLE CHANNEL HIGH SPEED TRANSISTOR

Minimum external creepage distance is measured to 4.4mm, minimuminternal creepage distance is measured to 3.5mm and minimumdistance through insulation is measured to 0.4mm. Tested for basic andsupplementary insulation. Thermal cycling test, 10 cycles. Each cycle: 68hin 100 degree C, 1h in 25degree C, 2h in 0 degree C and 1h in 25 degree C.After the cycling test a humidity test for 48h in 93% relative humidity. Electricstrength test between input and output 2400Vac/1 minute.The symbol “.” intype designation may be blank, A~Z or numbers, and denote different pinshape.Maximum operating temperature: 100 degrees C.The symbol “X” in type denotes X = Part no. (3,4)

Product Optocoupler

CERTIFICATE - Everlight Europe GmbH › img › cms › Safety_Certs › NEMKOP112… · Nemko AS...

Documents

webspecial.volkswagen.de · art. 3. la "Safety" art. 3.1b "EMC" art. 3.2 "Radio" Nemko s.p.a. (NB 2051) Laboratori Nemko Italia EN 62368-1:2014 ETSI EN 301 489-1 V2.2.O:2017 ETSI

NEMKO EUROPE The fast and reliable route to lasting CE ... › sites › nemko › files › users › Nemko-Europ… · Nemko Europe Certiﬁ cation Service A complete compliance

Technická dokumentace výtahu 40292118 - stavby.opsys.czstavby.opsys.cz/2011_AURUM/AURUM_Manual/Manualy/01... · KONE reference number: CT-10.01.105 (A) Attestate Revision: 0 @Nemko

POWER SUPPLIES BATTERY CHARGERS - Mascot · NEMKO The equipment is certified by NEMKO and that NEMKO performs yearly audits on the production. E-MARK Indicates that the product is

Norwegian Building Research Institute P.O.Box 123 Blindern Forskningsveien 3B 0314 Oslo Norway +47 22965500 +47 22965725 Contact persons: J.T. Brunsell

Test Report Reliability · Nemko Group Nemko AS, Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.com ENTERPRISE

SELSKAPSMØTE I LUFTAMBULANSETJENESTEN ANS...(hvert tredje år) gjennomføres varslede årlige oppfølgingsrevisjoner fra sertifiseringsorganet, NEMKO AS. Selskapet hadde oppfølgingsrevisjon

FSP catalogue - SANHAT Documents/Stock Items/Powe… · passive PFC Input Voltage 220-240VAC Safety Approved IJL, CSA, Tijv, NEMKO,CB, IJL, CSA, TÜV, NEMKO, CB, Server Power For

Invitasjon, 2015.10.08 Trondheim - Nemko 2015...Microsoft Word - Invitasjon,2015.10.08_Trondheim.docx Created Date 20150910082612Z

, a first in class oncolytic peptide ... - Lytix Biopharma 2017... · Lytix Biopharma AS | Gaustadalléen 21, NO-0349 Oslo, Norway | E-mail: post@lytixbiopharma.com ... Case study:

REFORM NIKOLAI FRIBERG Norwegian Institute for Water Research Gaustadalléen 21, NO-0349 OSLO, Norway Nikolai Friberg1

medteknorge.nomedteknorge.no/.../N-Statsbudsjettet-2015-Metdek-Norge.docx · Web viewForskningsparken • Gaustadalléen 21 • 0349 Oslo • +47 23 16 89 20 • • info@medteknorge.noMedtek

Certificate of Compliance - Bel - Power · CERTIFICATE No. P15220260 Order No. 293466 Page 1/3 Date of issue 25-09-2015 Juan Z. Kleppenes Certification Department Nemko AS Gaustadalléen

Date of issue: January 2019 - HellermannTyton › binaries › content › ...NEMKO Norges Elektriske Materiellkontroll Norway ... Certiﬁcation mark CE Conformité Européenne Europe

Nemko Italy - Nemko Group presentation 2016

Issues in Data Mining Applications -Tutorial- Nemanja Jovanovic, nemko@sezampro.yu Valentina Milenkovic, tina@eunet.yu Prof. Dr. Veljko Milutinovic, vm@etf.bg.ac.yu

Bunnpris in Blindern, Norway uses electronic shelf labels from … · 2011. 7. 28. · Bunnpris in Blindern, Norway uses electronic shelf labels from Delfi Technologies A/S. Steinar

Nemko Italy - Direttiva 1999/05/EC R&TTE

ON THE CONNECTION BETWEEN PROPAGATING ......Blindern, P.O. Box 1029 Blindern, N-0315 Oslo, Norway IRIS observations (Skogsrud et al. 2016). However, a clear connection between the

- en litteraturoppsummering - NINA naturforskning...NINA Rapport 1071 2 KONTAKTOPPLYSNINGER NINA hovedkontor Postboks 5685 Sluppen 7485 Trondheim Telefon: 73 80 14 00 NINA Oslo Gaustadalléen