Collaboration for Astronomy Signal Processing and Electronics Research

Collaboration for Astronomy Signal Processing and Electronics ResearchCollaboration for Astronomy Signal Processing and Electronics Research

10 gigabit Ethernet

Introduction to Simulink

400 MHz Bandwidth

Spectrometer4 input FX Correlator

ScheduleMorning:

Afternoon:

High level talks, background, science and extant instrument discussion

Hands-on tutorials (room 1301), small group whiteboard discussions

ROACH I Board

ROACH I Board

Interface to high speed analog to

digital conversion

ROACH I Board

Interface to high speed analog to

digital conversionHigh speed IO

(10 gigabit Ethernet)

ROACH I Board

Interface to high speed analog to

digital conversion

PowerPC microprocessor

High speed IO (10 gigabit Ethernet)

ROACH I Board

FPGA

Interface to high speed analog to

digital conversion

PowerPC microprocessor

High speed IO (10 gigabit Ethernet)

✴ FPGA stands for Field Programmable Gate Array - FPGAs consist of a collection of reprogrammable digital logic elements

✴ The first commercially available FPGA was introduced in 1985.

✴ Common applications include telecommunications, cryptography, image processing, defense systems, etc..

What is an FPGA?

✴ The first commercially available FPGA was introduced in 1985.

✴ Common applications include telecommunications, cryptography, image processing, defense systems, etc..

What is an FPGA?✴ FPGA stands for Field Programmable Gate Array - FPGAs consist of a collection of reprogrammable digital logic elements

Programming FPGAsTraditionally done with hardware description languages,

e.g. Verilog, VHDL

‣Addition and Subtraction in C

x = a + b;

Programming FPGAsTraditionally done with hardware description languages,

e.g. Verilog, VHDL

module addsub (a, b, addnsub, result);input [7:0] a;input [7:0] b;input addnsub;output [8:0]

result; reg [8:0] result; always @(a or b or

addnsub) begin if (addnsub)result = a + b;

else result = a - b;endendmodule

‣Addition and Subtraction in Verilog

‣Addition and Subtraction in C

x = a + b;

Programming FPGAsTraditionally done with hardware description languages,

e.g. Verilog, VHDL

HDL Code

Logic Synthesis Binary FPGA Programming Instructions (Bitstream)

Place and Route

Code Generation

Simulink Diagram

HDL Code

Logic Synthesis Binary FPGA Programming Instructions (Bitstream)

Download to ROACH

Place and Route

‘Real’ dual 400MHz BW 16k spectrometer for ROACH

Mark Wagner / Lincoln Greenhill

Up Next:Tutorial #1

An Introduction to Simulink and the CASPER Toolflow