View
4
Download
0
Category
Preview:
Citation preview
FlexiCell XLPE is a closed cell chemically cross linked polyolefin foam, commonly used as thermal insulation to protect against heat loss and condensation.
FlexiCell XLPE is reinforced with a heat bonded aluminium foil and is available with factory applied adhesive liner.
FlexiCell XLPE prefabricatedfittings are made in different sizes and shapes such as Elbows,T and Y sections.
Prefabricated fittings are available in a variety of wall thicknessess and inner diameters.
Easy to apply selfadhesive rolls and sheets
Very low thermalconductivity
FlexiCell Tubes
FlexiCell Rolls
FlexiCell Sheets
FlexiCell Prefabricated Fittings
FlexiCell XLPE is a CFC and HCFC free product. It does not contain, nor use in
its production, any substances that contribute to Ozone Depletion Potential
(ODP). FlexiCell XLPE is fibre free and has a very low Volatile Organic
Compound (VOC) emission level.
FIRE AND SMOKE PERFORMANCEFlexiCell XLPE meets AS /NZ 1530.3 & ISO 9705 - early fire hazard properties
of materials.
EXCELLENT THERMAL EFFICIENCY
QUICK & EASY TO INSTALL
ZERO WATER VAPOUR PERMEABILITY Condensation control is a key performance aspect of any insulation.
FlexiCell XLPE can be installed without any additional vapour barriers due to
its closed cell construction, and watertight aluminium foil barrier.
FlexiCell XLPE is fast and easy to install. It is more flexible than other pipe
insulation products, including glasswool, polystyrene and other extruded
foams. This results in greatly reduced installation time, thereby affording
significantly increased productivity.
FlexiCell XLPE’s excellent protection against condensation ensures the
long term thermal efficiency of the insulation.
ENVIRONMENTALLY FRIENDLY
FlexiCell XLPE has a very low thermal conductivity, guaranteeing high
performance in thermal insulation applications. Further to this, as
FlexiCell XLPE is closed cell, it also provides excellent levels of
condensation control.
+105-80 oC
DIN EN 14706, ASTM C1427
ASTM C518
Grey Color
Temperature Range
Applications: Themal insulation / protection for pipes, air ducts, vessels (incl. elbows, �ttings, �anges, etc.) and process equipment to prevent condensation and save energy.
Thermal Conductivity 0.032 (W/mk) at 23°C
3Density 25 ±3 kg/m (foam core only)
Max. Line TemperatureMin. Line Temperature
fcnz
-xlp
e-11
19-v
-0.1
Physical Properties
oC
Size AvailabilityTubes
Pressure sensitive adhesive coating options available.
Insulation Thickness
Environmental Properties
ASTM G21
Resistance to Fungi Excellent
ISO 22196
Resistance to Bacteria Excellent
Storage Life
Can be stored in dry, clean rooms at normal relative humidity (50% to 70%) and ambient temperature (0 C - 35 C)
Self adhesive products should be used within 1 year.
foam is generally resistant to UV radiation. However, for all outdoor application it must be protected with additional weather resistant
cladding, only FLEXICELL N Clad products are suitable for outdoor conditions for additional protection.
*XLPE
oo
ASTM C871
Chemical Analysis Very Good
ASTM D5116
Emission VOC (level) <4 μg/m /hr
Environmental FreindlyOzone Resistance Excellent Ozone Depletion Potential (ODP) 0 Global Warming Potential (GWP) <5CFC & HCFC, Dust, Fibres Free
Disclaimer: This information on Hira Industries products is presented to the best of our knowledge. All product data is based on average values and is for guidance only. As these products are subject to constant research and development, we reserve the right to update the contents without notice.
TECHNICAL DATA
ASTM E96
Water Vapour Permeance [perms] 0
JIS K6767
Water Absorption 0.00008 (g/cm )
ASTM B117
Resistance to Corrosion Excellent
ASTM D3574
Compression Set 35.77% (25mm)
Reaction to Fire
IMO MSC 307(88) Part 2 & 5
Smoke Toxicity Levels Passed
Ignitability 0Spread of Flame 0Heat Evolved 0 Smoke Developed 1
AS/NZ 1530.3 ISO 9705 (Group 2s Rating) Avg. Smoke Prod.:
0.493 m /sec
BS 476 Part 6 & 7 Class O
2
10 mm to 40 mm10 mm to 50 mm20 mm to 50 mm51 mm to 75 mm51 mm to 75 mm
Rolls
Sheets
2
3 mm to 25 mm
12 mm to 63 mm
A range of sizes are available
1.20 x 2.4m
6 mm to 28 mm32 mm to 125 mm140 mm to 712 mm25 mm to 115 mm125 mm to 712 mm
Recommended