View
1
Download
0
Category
Preview:
Citation preview
kITCHEN bATHROOM OffICE
LIvING ROOM wALk-IN bEDROOM
CUBE
YOUR HOME DESIGN CENTER, ALL IN ONE PLACE
Tel. : 450-427-2687 • 1-877-533-7729Fax: 450-427-7150 • 1-866-315-2186
www.ebsu.ca
KITCHEN • BATHROOM
33
TABLE OF CONTENT
warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Cabinet specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
base cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 à 11
wall cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 à 18
Pantry cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 à 25
vanity cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 à 28
Option description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Drawer description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Orga-line options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-32
Optimal storage solution . . . . . . . . . . . . . . . . . . . . . . . . . . 33-34
Glass frame door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Door profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 à 38
Polymer moldings and accessories . . . . . . . . . . . . . . . . . . . 39-40
wood moldings and accessories . . . . . . . . . . . . . . . . . . . . 41-42
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 à 46
wood door models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 à 49
Aluminum door models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Acrylic door models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Polyester door models . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52-53
Polymer door models . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 à 58
Melamine door models. . . . . . . . . . . . . . . . . . . . . . . . . . . . 59-60
Melamine finishes list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65
4
WARRANTYWe provide a limited lifetime warranty on our products
Cabinets Limited lifetime warranty
Melamine doors, panels and accessories Limited lifetime warranty
Polymer doors, panels and accessories Limited lifetime warranty
Polyester doors Limited lifetime warranty
Acrylic doors and panels Limited lifetime warranty
Aluminum doors Limited lifetime warranty
Wood doors, panels and accessories Limited lifetime warranty
Regular hardware Limited lifetime warranty
Blum hardware Limited lifetime warranty
we provide a limited lifetime warranty against defects on our products.
The lifetime warranty is valid to the original owner and is not transferable. This warranty is valid for any productthat has not been changed or impaired and is limited to defects only. we pledge to replace any defective productthat had a normal residential use. Our warranty applies to all products excluding delivery costs, installation andlabor. EbSU is not responsible for any damages caused by improper installation or use of its product s. This warrantyoverrules all other warranties, express or implied, and cannot in any circumstances be extende d by representatives,or by written or drawn information concerning sales. All our products have been checked by recognized tests asrepresentative.
Return policy
we do not accept returned merchandise without prior written authorization and a return number. Credit orreplace ment will be shipped prepaid. All returned merchandise is subject to a handling charge of 25%. No"Specia l Order" is eligible to returns.
Remplacement policy
Applies when the warranty claim has been completed and approved by a sales representative.
PRODUCT DURATION
RETURN AND REPLACEMENT POLICY
5
PRICING - SHIPPING - TAXES
PRICING
SHIPPING
TAXES
Our price lists does not constitute an offer to sell. Prices are subject to change with notice. Orders will be billedat prices in effect at the time of shipment and confirmed by order desk.
EbSU assumes no responsibility for delivery beyond its control. Here are the steps you need to follow to requesta credit or a claim.
1. Upon delivery of goods, please indicate on the carrier’s delivery form if the goods are damaged. Describewhat product is damaged and take a picture.
2. Contact your representative (s) within 48 hours of delivery and notify them that you received a damaged ormissing item. Your representative will, within a few days, contact you.
3. Any missing or broken pieces must be ordered by the store notifying the order desk that it is a replacementpiece and clearly identify the original purchase order number in reference.
4. It is mandatory that you get an authorization number from your representative for your claim to be accepted.
** N.B. : Please keep the damaged products until your sales representative authorizes you to return or destroy
the product. **
Prices do not include taxes.
6
PANELS
PANELS DESCRIPTION WIDTH HEIGHT MELAMINE WOOD ACRYLIC POLYMER
KICK PLATE
FILLER
ISLAND PANEL
DISHWASHER PANEL
FRIDGE PANEL
VALENCE
DECORATIVE VALENCE
COLUMN
DECORATIVE PANEL
CUSTOM PANEL
EURO LAMINATE PANEL
12 inches strip of edge included in the melamine package
Edge band applied on 2 shortfor wood and acrylic
Edge band applied on 1 long
Edge band applied on 2 shorts
Edge band applied on 1 long
Edge band applied on 1 long
*see annex for "U", "C" and "G" type
Edge band applied on 4 sides
finishing on request
4-1/2” 96” kP kPb kPAC kPTP
5-3/4” 96” kPv kPvb kPvAC kPvTP
5-1/4” 96” kPQ kPQb kPQAC kPQTP
2-1/2” 96” fIL fILb fILAC fILTP
48” 34-1/2” P-IL P-ILb P-ILAC P-ILTP
24” 34-1/2” P-Lv P-Lvb P-LvAC P-LvTP
24” 84” P-RE P-REb P-REAC P-RETP
24” 90” P-REw P-REwb P-REwAC P-REwTP
24” 91-3/4” P-REG P-REGb P-REGAC P-REGTP
24” 96” P-REGw P-REGwb P-REGwAC P-REGwTP
21”- 60” 6” - 24” vALb vAL
21”- 60” 6” - 24” vALAPPL
4” - 6” 12”- 96” COL
* * P-DECO
3” - 48” 4-1/2”-96” P-MEL P-PLATbOIS P-ACRYL P-PLAT
6” - 54” 6”-118” P-EURO
ACRYLIC
5/8’’ Thickness interior finish in white melamine
POLYMER
11/16’’ Thickness wrapped polymer film onMDf panel interior finish in white melamine
MELAMINE
5/8’’ Thickness
WOOD
5/8’’ Thickness finished both 2 sides
VALENCEAvailable in polymer and wood
DECORATIVE VALENCEAvailable in polymer
COLUMNAvailable in polymer***base illustrated
not included
DECORATIVE PANELAvailable in polymer
Custom doors Custom drawer front : according to each model specifications
7
CABINET SPECIFICATIONS
MANUFACTURING
BASE CABINET
All cabinets are made in white melamine (see exceptions in this spec book).finished interior in option (melamine finishes only).Cabinet back in 5/8’’ melaminebLUM hinges and mounting plates. 107° regular opening. bLUM white METAbOX runner system for standard cabinets.white cabinet sides have 2 white short edge band and 1 long edge band in color match to the door finish style of the cabinet.finished sides have 2 short and 1 long edge band in color match to the door finish style of the cabinet.
All base are floor cabinets, which means that the sides of the cabinets rest on the ground (see exceptions in this spec book).The kickplate must be covered with a melamine panel (2 ½” in retreat).
Standards
Height: 34-1/2’’ Depth: 23-1/4’’ cabinet size, 24” with doors (approx. according to the door thickness)
for all 90” height pantries and up, it is strongly recommended to check the ceiling height’s since this cabinet is delivered on its side. A minimum height of 90 1/2" is needed in order to turn back a 84’’ Height pantry in a vertical position. A minimumheight of 93 1/4" is needed in order to turn back a 90’’ Height pantry in a vertical position. A minimum height of 94 7/8" is neededin order to turn back a 91 3/4’’ Height pantry in a vertical position. A minimum height of 99" is needed in order to turn back a 96’’Height pantry in a vertical position.
Standards
Height: 84’’ (GM), 90’’ (GMw), 91-3/4’’ (GMG), 96’’ (GMGw)Depth: 11-3/4’’ cabinet size, 12-1/2’’ with doors (approx. according to the door thickness)
23-1/4’’ cabinet size, 24’’ with doors (approx. according to the door thickness)
It is not recommended to install a deep wall cabinet without any support from a wall, a cabinet or a panel. Standards
Height: 12’’ (HRE)15’’ (HTP/HTPP/HH)16-1/4’’ et 17-1/2’’ (HHP/HCP) countertop cabinet18’’ (HP/HPP)24’’ (HM/HMP)30’’ (HG/HGP)36’’ (HGw/HGwP)39’’ (HTG/HTGP) 42’’ (HTGw/HTGwP)
Depth: 11-3/4’’ cabinet size, 12-1/2’’ with doors (approx. according to the door thickness)23-1/4’’ cabinet size, 24’’ with doors (approx. according to the door thickness)
Vanity and linens
Height: 29-7/8’’ for vanity and 78-1/8’’ for linenDepth: 20-1/4’’ cabinet size, 21’’ with doors (approx. according to the door thickness)
Standards pharmacie
Depth: 5- 1/4’’ cabinet size, 6’’ with doors (approx. according to the door thickness)
Standards tête lumière
Depth: 12’’ cabinet sizeNote: The light box is used to fit a built-in lighting system (not included).
A routing of 3 positions is proposed. The installer will complete the drilling in order to prepare the casing depending on the chosen lighting position.
PANTRY CABINET
WALL CABINET
VANITY CABINET
BASE CABINET
CODEDESCRIPTION
BASE - B1P1 door
BASE - B2P2 doors
BASE - BFPsink base 2 doors
BASE - B1T1P 1 drawer/1 door
BASE- B2T2P 2 drawers/2 doors
BASE - B1T2P 1 drawer/2 doors
Cabinet
Minimum Width 6” 21” 21” 9” 21” 21”
Maximum Width 24” 42” 42” 24” 42” 42”
Minimum Height 19-1/2” 19-1/2” 25-1/2” 25-1/2” 25-1/2” 25-1/2”
Maximum Height 48” 48” 48” 48” 48” 48”
Minimum Depth 5-1/4” 5-1/4” 17-1/4” 17-1/4” 17-1/4” 17-1/4”
Maximum Depth 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4”
L/R Hinges(Penture Gauche/Droite) l lMotion Doors (EBSU-MOTION_P) l l l l l lEconomotion Drawer(ECONOMOTION_T) l l lEBSUMotion Drawer(EBSU-MOTION_T) l l l
> 36” W. INCLUDED
WOODMotion Drawer(T_MOTION_BOIS) l l lShelf Qty/cabinet 1 1 1 1 1 1
Additional shelf l l l l l l
Inside cabinet motion slidingshelf
TC1221EMTC1221EMTC2436EM/
TCEVE3036EM
TC1221EMTC2436EM/
TCEVE3036EM(BEV)
TC1221EMTC1221EMTC2436EM
TC1221EMTC2436EM
Finish interiorDistinction interior finish l l l l l lNo Kick Plate(SCDPIED) l l l l l lPlastic or MetalLevelers l l l l l lVertical FrontStretcher l l l
Melamine l l l l l l
Polymer l l l l l l
Acrylic l l l l l l
Wood l l l l l l
CABIN
ET DIM
ENSIONS
MOTIO
NFIN
ISH S
IDES
SHELV
ES
OPTIONS
Option description on page 29
8
l
BASE CABINET
CODEDESCRIPTION
BASE - B3T3 drawers
BASE - B2T2T4 drawers
BASE - B 2T2 drawers
BASE - B4T4 drawers
BASE - BCM1 door
BASE - BC2 doors
BASE - BCT3 drawer corner base
Cabinet
Minimum Width 12” 24” 12” 9” 37-1/2” 30”
Maximum Width 48” 45” 45” 24” 48” 39” 39”
Minimum Height 22-1/2” 22-1/2” 19-1/2” 28-1/2” 19-1/2” 15” + KP
Maximum Height 48” 48” 48” 48” 48” 43-1/2” + KP 30” + KP
Minimum Depth 17-1/4” 17-1/4” 17-1/4” 17-1/4” 17-1/4” 17-1/4”Maximum Depth 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4” 23-1/4”L/R Hinges(Penture Gauche/Droite) l lMotion Doors (EBSU-MOTION_P) l lEconomotion Drawer(ECONOMOTION_T) l l l lEBSUMotion Drawer(EBSU-MOTION_T)
l l l l INCLUDED
WOODMotion Drawer(T_MOTION_BOIS) l l l lShelf Qty/cabinet 1 1
Additional shelf lInside cabinet motion sliding shelf TCBC4548EM
Finish interiorDistinction interior finish l l l l l l lNo Kick Plate(SCDPIED) l l l l l INCLUDED INCLUDED
Plastic or Metal Levelers l l l l l PLASTIC LEVELERS
INCLUDEDPLASTIC LEVELERS
INCLUDEDVertical FrontStretcher l lFix top drawer front l lMelamine l l l l l lPolymer l l l l l lAcrylic l l l l l lWood l l l l l lPolymer lAcrylic lWood l
CABIN
ET DIM
ENSIONS
MOTIO
NFIN
ISH S
IDES
SHELV
ES
OPTIONS
9
FIX PANEL
S
Corner panel27” x 30”
Special note
> 36” W. INCLUDED > 36” W. INCLUDED > 36” W. INCLUDED
Do not place next to an appliance or otherdeeper cabinets
Option description on page 29
BASE CABINET
CODEDESCRIPTION
BASE - BPWaste cabinet
BASE - BTDWaste management
BASE - BE6 Spice pull out
BASE - BMO241 Drw/Microwave
BASE - BOVOven
BASE - BQBench
Cabinet
Minimum Width 6” 12 24” 12”
Maximum Width 18” 17-3/4”|23-5/8” 12” 30” 36” 36”
Minimum Height 34-1/2” 34-1/2” 34-1/2” 25-1/2” 18” 10-1/2”
Maximum Height 36” 36” 36” 40-1/2” 60” 22-1/2”
Minimum Depth 23-1/4” 23-1/4” 23-1/4” 17-1/4” 12” 17-1/4”
Maximum Depth 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4”
Economotion Drawer(ECONOMOTION_T) l l lEBSUMotion Drawer(EBSU-MOTION_T)
INCLUDED INCLUDED l l
WOODMotion Drawer(T_MOTION_BOIS) l l
Finish interiorDistinction interior finish l l l MELAMINE CRIB
FINISHE l l
No Kick Plate(SCDPIED l l l l INCLUDED lPlastic or MetalLevelers l l l l l l
Melamine l l l INCLUDED INCLUDED l
Polymer l l l l l l
Acrylic l l l l l l
Wood l l l l l l
Melamine l
Polymer l
Acrylic l
Wood lElectric opening
available14-1/16’’ opening
height interiorTop panel
not included
10
OPTIO
NS
CABIN
ET DIM
ENSIONS
MOTIO
NFIN
ISH S
IDES
Special note
OVEN PANEL
Option description on page 29
OPEN SHELFINT. WHITEOPEN SHELFINT. WHITEOPEN SHELFAVAILABLE IN WOOD
BASE CABINET
11
Option description on page 29
CODEDESCRIPTION
BASE - BD6Open angle Shelf
BASE - BA9Angle 2 doors
BASE - TR1224Angle 2 doors
CC3024Duct cover
Cabinet
Minimum Width 4-1/2” 6”
Maximum Width 12” 9” 11-3/4” 48”
Minimum Height 19-1/2” 15” 4-1/2”
Maximum Height 48” 34-1/2” 49-1/2” 24”
Minimum Depth 12-1/2” 5-1/4”
Maximum Depth 24” 23-1/4” 24” 20-1/4”
L/R Hinges(Penture Gauche/Droite) l l lMotion Doors (EBSU-MOTION_P) l l
Additional shelf l l lFinish interiorDistinction interior finish INCLUDED INCLUDED
No Kick Plate(SCDPIED) l INCLUDED
Plastic or MetalàLevelers
Polymer l l
Acrylic l l
Wood l l lCut corner
3” x 3”Cut corner
9-1/8” x 9-1/8”fix panel
3-3/8” width
No kick plate
FIX PANEL
SCABIN
ET DIM
ENSIONS
MOTIO
NOPTIO
NS
Coupe coin9-1/8” x 9-1/8”
Special note
WALL CABINET
CODEDESCRIPTION
WALL - HTGW-1P1door
WALL - HTGW-2P2 doors
WALL - HTG-1P1 door
WALL - HTG-2P2 doors
WALL - HGW-1P1 door
WALL - HGW-2P2 doors
WALL - HG-1P1 door
WALL - HG-2P2 doors
Cabinet
Minimum Width 6” 21” 6” 21” 6” 21” 6” 21”
Maximum Width 24” 42” 24” 42” 24 ” 42” 24” 42”
Minimum Height 39” 39” 36” 36” 30” 30” 15” 24”
Maximum Height 49-1/2” 49-1/2” 39” 39” 36” 36” 30” 30”
Minimum Depth 5-1/4” 5-1/4” 5-1/4” 5-1/4” 5-1/4” 5-1/4” 5-1/4” 5-1/4”
Maximum Depth 18” 18” 18” 18” 18” 18” 18” 18”
L/R Hinges(Penture Gauche/Droite) l l l lMotion Doors (EBSU-MOTION_P) l l l l l l l lShelf Qty/cabinet 3 3 3 3 2*** 2*** 2 2
Double bottom*shelf l l l l l l l lNo Door (SANS_PORTE)
lMIN. 12” W l l
MIN. 12” W l lMIN. 12” W l l
MIN. 12” W l
Glass door frame l l l l l l l lPlexi glass for door frame l l l l l l l lPlexi pour verrière l l l l l l l lFinish interiorDistinction interior finish l l l l l l l lRecessed back panel4-1/2” | 6-1/2” l l l l l l l l
Melamine l l l l l l l l
Polymer** l l l l l l l l
Acrylic** l l l l l l l l
Wods l l l l l l l l
12
MOTIO
NCABIN
ET DIM
ENSIONS
OPTIONS
SHELV
ES
FIN
ISH S
IDES
Option description on page 29 *Mininum 7-1/4” deep **finished interior not available *** 3 shelves from 39” high
WALL CABINET
CODEDESCRIPTION
WALL - HTGWP-1Pdoor
WALL - HTGWP-2P2 doors
Interior doors
WALL - HTGP-1P1 door
WALL - HTGP-2P2 doors
Interior doors
WALL - HGWP-1P1 door
WALL - HGWP-2P2 doors
Interior doors
WALL - HGP-1P1 door
WALL - HGP-2P2 doors
Interior doors
Cabinet
Minimum Width 6” 21” 6” 21” 6” 21” 6” 21”
Maximum Width 24” 42” 24” 42” 24 ” 42” 24” 42”
Minimum Height 39” 39” 36” 36” 30” 30” 12” 12”
Maximum Height 49-1/2” 49-1/2” 39” 39” 36” 36” 30” 30”
Minimum Depth 18” 18” 18” 18” 18” 18” 18” 18”
Maximum Depth 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4”
L/R Hinges(Penture Gauche/Droite) l l l lMotion Doors (EBSU-MOTION_P) l l l l l l l lShelf Qty/cabinet 3 3 3 3 2*** 2*** 2 2
Additional shelf l l l l l l l lInterior shelvescolor
TC1221EMTC2430EM l l l
Double bottomshelf l
MIN. 15” W l lMIN. 15” W l l
MIN. 15” W l lMIN. 15” W l
No Door (SANS_PORTE) l l l l l l l l
Glass door frame l l l l l l l lPlexi glass for door frame l l l l l l l lFinish interiorDistinction interior finish l l l l l l l lRecessed back panel4-1/2” | 6-1/2” l l l l l l l l
Melamine l l l l l l l l
Polymer l l l l l l l l
Acrylic l l l l l l l l
Wood l l l l l l l l
13
Option description on page 29
Special note
MOTIO
NCABIN
ET DIM
ENSIONS
OPTIONS
SHELV
ES
FIN
ISH S
IDES
Must be supported by cabinet, panels or walls
l
*** 3 shelves from 39” high
WALL CABINET
CODEDESCRIPTION
WALL - HM2 doors
WALL - HP2 doors
WALL - HTP2 doors
WALL - HMP2 doors
WALL - HPP2 doors
WALL - HTPP2 doors
Cabinet
Minimum Width 21” 21” 21” 21” 21” 21”
Maximum Width 42” 42” 36” 42” 42” 36”
Minimum Height 18” 15” 12” 18” 15” 12”
Maximum Height 24” 18” 15” 24” 18” 15”
Minimum Depth 5-1/4” 5-1/4” 5-1/4” 11-3/4” 11-3/4” 11-3/4”
Maximum Depth 11-3/4” 11-3/4” 11-3/4” 29-1/4” 29-1/4” 29-1/4”
Motion Doors (EBSU-MOTION_P) l l l l l lShelf Qty/cabinet 1 1 0 1 1 0
Additional shelf l l l l l lDouble bottomshelf l l lNo Door(SANS_PORTE) l l l l l l
Glass door frame l l l l l lPlexi pour verrière l l l l l lPlexi glass for door frame l l l l l lRecessed back panel4-1/2” | 6-1/2” l l l
Melamine l l l l l l
Polymer l l l l l l
Acrylic l l l l l l
Wood l l l l l l
MOTIO
NCABIN
ET DIM
ENSIONS
OPTIONS
SHELV
ES
FIN
ISH S
IDES
14
Option description on page 29
Special note Must be supported by cabinet, panels or walls
• Not guaranteed > 36”
WALL CABINET
CODEDESCRIPTION
WALL - HHFBifold doors
WALL - HHFPBifold doors
WALL - HHOOver lift door
WALL - HHOPOver lift door
WALL - HHSStay lift door
WALL - HHSPStay lift door
Cabinet
Minimum Width 24” 24” 24” 24” 24” 24”
Maximum Width 48” 48” 48” 48” 48” 48”
Minimum Height 24” 24” 18” 18” 9” 9”
Maximum Height 36” 36” 30” 30” 19-1/2” 19-1/2”
Minimum Depth 11-3/4” 17-1/4” 11-3/4” 17-1/4” 11-3/4” 17-1/4”
Maximum Depth 17-1/4” 29-1/4” 17-1/4” 29-1/4” 17-1/4” 29-1/4”
Ceiling clearancerequired 5-1/4” 5-1/4” 7-1/4” 7-1/4” 5-5/16” 5-5/16”
Motion Doors (EBSU-MOTION_P)
INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED
Electric opening l l l l l lShelf Qty/cabinet 2 2 1 1 0
1 | 18” HEIGHT0
1 | 18” HEIGHT
Additional shelf l l l l l lDouble bottomshelf l l l l lNo Door(SANS_PORTE) l l l l l l
Glass door frame l l l l l lPlexi glass for door frame l l l l l lFinish interiorDistinction interior finish l l l l l l
Melamine l l l l l l
Polymer l l l l l l
Acrylic l l l l l l
Wood l l l l l l
MOTION
CABIN
ET DIM
ENSIONS
OPTIONS
SHELV
ES
FIN
ISH S
IDES
15
Option description on page 29
Special note *Must be supportedby panels or pantry
WALL CABINET
16
CODEDESCRIPTION
WALL - HHPParallel door
WALL - HHPPParallel door
WALL - HCPParallel corner
WALL - HHHorizontal opening
WALL - HREHorizontal opening
Cabinet
Minimum Width 24” 24” 24-1/8” 15” 15”
Maximum Width 48” 48” 27” 36” 36”
Minimum Height 16” 16” 16” 9” 9”
Maximum Height 21" 21" 21" 15” 15”
Minimum Depth 11-3/4” 17-1/4” 11-3/4” 8-1/4” 11-3/4”
Maximum Depth 17-1/4” 29-1/4” 14-3/4” 11-3/4” 29-1/4”
Ceiling clearancerequired 15” 15” 15”
Motion Doors (EBSU-MOTION_P)
INCLUDED INCLUDED INCLUDED
Electric opening l l lShelf Qty/cabinet 0 0 0 0 0
Additional shelf lDouble bottomshelf lNo Door(SANS_PORTE) l l l l l
Glass door frame l l l l lPlexi glass for door frame l l l l lFinish interiorDistinction interior finish l l l l l
Melamine l l l l l
Polymer l l l l l
Acrylic l l l l l
Wood l l l l l
MOTION
CABIN
ET DIM
ENSIONS
OPTIONS
SHELV
ES
FIN
ISH S
IDES
Option description on page 29
Special note
Adjustable suspension arms
*Must be supportedby panels or pantry
17
Description des options en page 29
CODEDESCRIPTION
WALL - HCMBlind corner
WALL - HCAngle corner
WALL - HCAngle corner
WALL - HRV6Wine rack
WALL - HUHHorizontal open cabinet
WALL - HUVVertical open cabinet
Cabinet
Minimum Width 24” 12” 6”
Maximum Width 36” 24-1/8” 27” 6” 60” 18”
Minimum Height 15” 15” 15” 6” 15”
Maximum Height 49-1/2” 49-1/2” 49-1/2” 30” | 36” | 39” | 42 18” 60”
Minimum Depth 5-1/4” 11-3/4” 6” 6”
Maximum Depth 14-3/4” 11-3/4” 14-3/4” 14-3/4” 19-1/2” 19-1/2”L/R Hinges(Penture Gauche/Droite) l l lMotion Doors (EBSU-MOTION_P) l l lShelf Qty/cabinet 2|3 (39” et +) 2|3 (39” et +) 2|3 (39” et +) 4 |5 (39” et +) 0 à 4 0 à 4
Additional shelf l l lDouble bottomshelf l l lNo Door(SANS_PORTE) l l l HRV-SF
CABINET
Glass door frame l l lPlexi glass for door frame l l lFinish interiorDistinction interior finish l l l l INCLUDED INCLUDED
Wood l l lRecessed back panel4-1/2” | 6-1/2” l l lMelamine INCLUDED l l lPolymer l l l lAcryliqueAcrylic l l l lWood l l l lMelamine INCLUDED INCLUDED INCLUDED lPolymer l l l lAcrylic l l l lWood l l l l
Corner panel15” width
(30”|36”) 5 holes(39”|42”) 6 holes
CABIN
ET DIM
ENSIONS
MOTIO
NFIN
ISH S
IDES
SHELV
ES
OPTIONS
FIX
PANELS
Special note
WALL CABINET
18
WALL CABINET
CODEDESCRIPTION
WALL - HA12Angle 1 door
WALL - HD6Open shelf
WALL - HMOMicrowave
TR1224Angle 2 doors
CC3024Duct cover
Cabinet
Minimum Width 4-1/2” 21” 6”
Maximum Width 12-1/2” 12” 30” 24” 48”
Minimum Height 15” 15” 12” 15” 4-1/2”
Maximum Height 49-1/2” 49-1/2” 18” 49-1/2” 24”
Minimum Depth 9” 11-3/4” 5-1/4”
Maximum Depth 12-1/2” 18” 18” 11-3/4” 20-1/4"
L/R Hinges(Penture Gauche/Droite) l REVERSIBLE l
Motion Doors (EBSU-MOTION_P) l lShelf Qty/cabinet 2|3 (39” et +) 2|3 (39” et +) 2|3 (39” et +)
Additional shelf l l l
No Door(SANS_PORTE) l l
Glass door frame l lPlexi glass for door frame l l
Finish interiorDistinction interior finish INCLUDED INCLUDED INCLUDED INCLUDED
Polymer l
Acrylic l
Wood l l l
Melamine INCLUDED INCLUDED
Polymere l* l*
Acrylic l* l*
Wood l lApplied panel3-3/8” width
Cut corner3” x 3” 16” bottom shelf depth fix panel
3-3/8” widthCut corner
9-1/8” x 9-1/8” Cut corner 3-5/16” Cut corner9-1/8” x 9-1/8”
CABIN
ET DIM
ENSIONS
MOTIO
NSH
ELV
ES
OPTIONS
FIX
PANELS
Special note
Option description on page 29 * Apparent side panel not available if finished interior.
19
PANTRY CABINET
GM (84”)GMW (90“) No 1 No 2 No 3 No 4 No 5 No 6
Cabinet
Minimum Width 24” 24” 24” 24” 24” 24”Maximum Width 36” 36” 36” 36” 36” 36”Minimum Height 79-1/2” 79-1/2” 79-1/2” 84” 84” 84”Maximum Height 96” 96” 96” 96” 96” 90”Minimum Depth 11-3/4” 23-1/4” 23-1/4” 23-1/4” 23-1/4” 11-3/4”Maximum Depth. 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4”Motion Doors (EBSU-MOTION_P) l l l l l l
l ll ll l
Shelf Qty/cabinet 4 2 2 2 1 3Additional shelf l l l l l lMicrowave shelfMelamine finish NA NA NA INCLUDED INCLUDED INCLUDED
Microwave shelfWood finish l l lInside cabinet motion sliding shelf TC2436EM TC2436EM TC2436EM TC2436EM
No Door (SANS_PORTE l l l l l lGlass door frame (all or top only) l l l l l lPlexi glass for door frame l l l l l lFinish interiorDistinction interior finish l l l l l lNo Kick Plate(SCDPIED) l l l l l lPlastic or MetalLevelers l l l l l lMelamine l l l lPolymer l l l lAcrylic l l l lWood l l l lMelamine *INCLUDED *INCLUDED *INCLUDED *INCLUDED *INCLUDED *INCLUDEDPolymer l l l l l lAcrylic l l l l l lWood l l l l l lC (GM | GMW) 18”|24” (var) 30”|36” (var) 30”|36” (var) 12” ou 15”|21” (var) 12” ou 15”|21” (var) 15”|21” (var)B (GM | GMW) 31-1/2“ 34-1/2“ 34-1/2“ 34-1/2” |15“ ou 18” 34-1/2” |15“ ou 18” 31-1/2“ |18“A 30” 15” 15” 15” 15” 15”
CBA
CBA
CBA
CB2B1A
CB2B1A
Option description on page 29
B1B1B1B1
B1B1B1B1
CBA
Economotion Drawer(ECONOMOTION_T)
EBSUMotion Drawer(EBSU-MOTION_T)
WOODMotion Drawer(T_MOTION_BOIS)
CABINET
DIM
ENSIONS
MOTION
FINIS
H S
IDES
OPTIONS
OVE
N PANEL
SHELV
ES
HEIGHT
CONFIGURATIONS
20
PANTRY CABINET
GMG (91-3/4”)GMGW (96“) No 1 No 2 No 3 No 4 No 5 No 6
Cabinet
Minimum Width 24” 24” 24” 24” 24” 24”Maximum Width 36” 36” 36” 36” 36” 36”Minimum Height 87-1/4” 90” 90” 90” 90” 90”Maximum Height 96” 96” 96” 96” 96” 96”Minimum Depth 11-3/4” 23-1/4” 23-1/4” 23-1/4” 23-1/4” 11-3/4”Maximum Depth 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4”Motion Doors (EBSU-MOTION_P) l l l l l l
l ll ll l
Shelf Qty/cabinet 5 3 3 2 2 4Additional shelf l l l l l lMicrowave shelfMelamine finish NA NA NA INCLUDED INCLUDED INCLUDED
Microwave shelfWood finish l l lInside cabinet motion sliding shelf TC2436EM TC2436EM TC2436EM TC2436EM
No Door (SANS_PORTE) l l l l l lGlass door frame (all or top only l l l l l lPlexi glass for door frame l l l l l lFinish interiorDistinction interior finis l l l l l lNo Kick Plate(SCDPIED) l l l l l lPlastic or MetalLevelers l l l l l lMelamine l l l lPolymer l l l lAcrylic l l l lWood l l l lMelamine *INCLUDED *INCLUDED *INCLUDED *INCLUDED *INCLUDED *INCLUDEDPolymer l l l l l lAcrylic l l l l l lWood l l l l l lC (GMG | GMGW) 39”|42” 37-3/4”|43-1/2” (var) 37-3/4”|43-1/2” (var) 22-3/4”|28-1/2” (var) 22-3/4”|28-1/2” (var) 39”|43-1/2” (var)B (GMG | GMGW) 18-1/4”|19-1/2” (var) 34-1/2“ 34-1/2“ 34-1/2“|15“ 34-1/2“|15“ 18“A 30” 15” 15” 15” 15” 30”
CBA
CBA
CBA
CB2B1A
CB2B1A
CBA
CABINET
DIM
ENSIONS
MOTION
FINIS
H S
IDES
OPTIONS
OVE
N PANEL
SHELV
ES
HEIGHT
CONFIGURATIONS
Option description on page 29
B1B1B1B1
B1B1B1B1
Economotion Drawer(ECONOMOTION_T)
EBSUMotion Drawer(EBSU-MOTION_T)
WOODMotion Drawer(T_MOTION_BOIS)
21
PANTRY CABINET
GM (84”)GMW (90“) No 7 No 8 No 9 No 12 No 13 No 15
Cabinet
Minimum Width 24” 24” 9” 24” 24” 9”Maximum Width 36” 36” 24” 36” 36” 24”Minimum Height 79-1/2” 81” 79-1/2” 79-1/2” 84” 84”Maximum Height 90” 90” 90” 90” 90” 90”Minimum Depth 17-1/4” 17-1/4” 11-3/4” 17-1/4” 17-1/4” 7-1/4”Maximum Depth 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4” 11-3/4”L/R Hinges(Penture Gauche/Droite) l lMotion Doors (EBSU-MOTION_P) l l l l l lEconomotion Drawer(ECONOMOTION_T) l l l lEBSUMotion Drawer(EBSU-MOTION_T) l l l lWOODMotion Drawer(T_MOTION_BOIS) l l l lShelf Qty/cabinet 3 3 4 3 4 4
Additional shelf l l l l l lMicrowave shelfMelamine finish NA INCLUDED NA NA NA NA
Microwave shelfWood finish lInside cabinet motion sliding shelf TC2436EM TC2436EM TC1224EM TC2436EM TC2436EM
No Door (SANS_PORTE) l l l l l lGlass door frame (all or top only) l l l l l lPlexi glass for door frame l l l l l lFinish interiorDistinction interior finish l l l l l lNo Kick Plate(SCDPIED) l l l l l lPlastic or MetalLevelers l l l l l lBroom option l lMelamine INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED
Polymer l l l l l lAcrylic l l l l l lWood l l l l l lC (GM | GMW) 18”|24” (var) 15”|21” (var) 18”|24” (var) 18”|24” (var) 18”|24” (var) 18”|24” (var)B (GM | GMW) 31-1/2“ 31-1/2”|18” 31-1/2” 31-1/2” 31-1/2” 31-1/2”A 15”- 15” 15” 30” 12”- 12”- 6” 24”- 6” 30”
MOTION
FINIS
H S
IDES
CBA
CB2B1A
CBA
CB2B1A
CB2B1A
CBA
OPTIONS
SHELV
ES
CABINET
DIM
ENSIONS
HEIGHT
CONFIGURATIONS
Option description on page 29
22
PANTRY CABINET
GMG (91-3/4”)GMGW (96“) No 7 No 8 No 9 No 12 No 13 No 15
Cabinet
Minimum Width 24” 24” 9” 24” 24” 9”Maximum Width 36” 36” 24” 36” 36” 24”Minimum Height 85-1/2” 90” 85-1/2” 85-1/2” 85-1/2” 85-1/2”Maximum Height 90” 96” 96” 96” 96” 96”Minimum Depth 17-1/4” 17-1/4” 11-3/4” 17-1/4” 17-1/4” 7-1/4”Maximum Depth 29-1/4” 29-1/4” 29-1/4” 29-1/4” 29-1/4” 11-3/4”L/R Hinges(Penture Gauche/Droite) l lMotion Doors (EBSU-MOTION_P) l l l l l lEconomotion Drawer(ECONOMOTION_T) l l l lEBSUMotion Drawer(EBSU-MOTION_T) l l l lWOODMotion Drawer(T_MOTION_BOIS) l l l lShelf Qty/cabinet 4 3 5 4 5 5
Additional shelf l l l l l lMicrowave shelfMelamine finish NA INCLUDED NA NA NA NA
Microwave shelfWood finishInside cabinet motion sliding shelf TC2436EM TC2436EM TC1224EM TC2436EM TC2436EM
No Door (SANS_PORTE) l l l l l lGlass door frame(all or top only) l l l l l lPlexi glass for door frame l l l l l lFinish interiorDistinction interior finish l l l l l lNo Kick Plate(SCDPIED) l l l l l lPlastic or MetalLevelers l l l l l lBroom option l lMelamine INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED
Polymer l l l l l lAcrylic l l l l l lWood l l l l l lC (GMG | GMGW) 39”|42”) 24”|28-1/2” (var 39”|42” 39”|42”) 39”|42” 39”|42”B (GMG | GMGW) 18”|19-1/2” (var) 30”|18” 18”|19-1/2” (var) 18”|19-1/2” (var) 18”|19-1/2” (var) 18”|19-1/2” (var)A 15”- 15” 15” 30” 12”- 12”- 6” 24”- 6” 30”
MOTION
FINIS
H S
IDES
OPTIONS
SHELV
ES
CABINET
DIM
ENSIONS
HEIGHT
CONFIGURATIONS
Option description on page 29
CBA
CB2B1A
CBA
CB
A
CBA
CBA
23
PANTRY CABINET
GM (84”)GMW (90“) No 16 No 17
GMA | GMAW No 18 No 19
Cabinet
Minimum Width 24” 24” 24”Maximum Width 36” 24” 36” 36”Minimum Height 79-1/2” 79-1/2” 79-1/2” 79-1/2”Maximum Height 90” 90” 90” 90”Minimum Depth 7-1/4” 17-1/4” 17-1/4”Maximum Depth 11-3/4” 23-1/4” 29-1/4” 29-1/4”Motion Doors (EBSU-MOTION_P) l l l INCLUDEDEconomotion Drawer(ECONOMOTION_T) lEBSUMotion Drawer(EBSU-MOTION_T) l INCLUDEDWOODMotion Drawer(T_MOTION_BOIS) l lShelf Qty/cabinet 4 4 3 3
Additional shelf l l l lInside cabinet motion sliding shelf TC2436EM TC2436EM
No Door (SANS_PORTE) l l l lGlass door frame(all or top only) l l l lPlexi glass for door frame l l l lFinish interiorDistinction interior finish l l l lNo Kick Plate(SCDPIED) l l l lPlastic or MetalLevelers l l l lMelamine INCLUDED INCLUDED INCLUDED INCLUDED
Polymer l l l lAcrylic l l l lWood l l l lC (GM | GMW) 18”|24” (var) 18”|24” (var) 18”|24” (var) 30”B (GM | GMW) 31-1/2“ 31-1/2” 31-1/2” 19-1/2”|25-1/2” (var)A 30” 30” 12”- 12”- 6” 12”- 12”- 6”
MOTION
FINIS
H S
IDES
OPTIONS
SHELV
ES
CABINET
DIM
ENSIONS
HEIGHT
CONFIGURATIONS
Option description on page 29
CBA
CBA
CB
A
CBA
Any other pantryconfiguration not availablein those choicesmust be ordered in seperate parts.Please use cabinets availablein this spec bookto do so.
Illustrated image*Right cabinet
24
PANTRY CABINET
GMG (91-3/4”)GMGW (96“) No 16 No 17
GMAG | GMAGW No 18 No 19
Cabinet
Minimum Width 24” 24”Maximum Width 36” 24” 36”Minimum Height 85-1/2” 85-1/2” 85-1/2”Maximum Height 96” 96” 96”Minimum Depth 7-1/4” 17-1/4”Maximum Depth 12-1/2” 24” 29-1/4”Motion Doors (EBSU-MOTION_P) l l lEconomotion Drawer(ECONOMOTION_T) l lEBSUMotion Drawer(EBSU-MOTION_T) lWOODMotion Drawer(T_MOTION_BOIS) lShelf Qty/cabine 5 5 4
Additional shelf l l lInside cabinet motion sliding shelf TC2436EM
No Door (SANS_PORTE) l l lGlass door frame (all or top only) l l lPlexi glass for door frame l l lFinish interiorDistinction interior finish l l lNo Kick Plate(SCDPIED) l l lPlastic or MetalLevelers l l lMelamine INCLUDED INCLUDED INCLUDED
Polymer l l lAcrylic l l lWood l l lC (GMG | GMGW) 39”|42” 39”|42” 39”|42”B (GMG | GMGW) 18”|19-1/2” (var) 18”|19-1/2” (var) 18”|19-1/2” (var)A 30” 30” 12”- 12”- 6”
MOTION
FINIS
H S
IDES
OPTIONS
SHELV
ES
CABINET
DIM
ENSIONS
HEIGHT
CONFIGURATIONS
Option description on page 29
Any other pantryconfiguration not availablein those choicesmust be ordered in seperate parts.Please use cabinets availablein this spec bookto do so.
Illustrated image*Right cabinet
CBA
CBA
CBA
Left/Right*
25
PANTRY CABINET
GM (84”)GMW (90“) No 20 No 21 No 22 No 23 No 24 No 25
Cabinet
Minimum Width 24” 24” 24” 24” 24” 24”Maximum Width 36” 36” 36” 36” 36” 36”Minimum Height 79-1/2” 79-1/2” 79-1/2” 79-1/2” 79-1/2” 79-1/2”Maximum Height 90” 90” 90” 90” 90” 90”Minimum Depth 17-1/4” 11-3/4” 11-3/4” 17-1/4” 11-3/4” 17-1/4”Maximum Depth 29-1/4” 23-1/4” 23-1/4” 29-1/4” 23-1/4” 29-1/4”Motion Doors (EBSU-MOTION_P) INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED INCLUDEDEBSUMotion Drawer(EBSU-MOTION_T) INCLUDED INCLUDED INCLUDEDWOODMotion Drawer(T_MOTION_BOIS) l l lShelf Qty/cabinet 3 4 3 3 4 3
Additional shelf l l l l l lInside cabinet motion sliding shelf TC2436EM TC2436EM
Ceiling clearance required 7-1/4” 5-1/4” 7-1/4” 5-5/16” 5-5/16” 5-1/4”
No Door (SANS_PORTE) NOT RECOMMENDED NOT RECOMMENDED NOT RECOMMENDED NOT RECOMMENDED NOT RECOMMENDED NOT RECOMMENDED
Glass door frame(all or top only) l l l l l lPlexi glass for door frame l l l l l lFinish interiorDistinction interior finish l l l l l lNo Kick Plate(SCDPIED) l l l l l lPlastic or MetalLevelers l l l l l lMelamine INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED
Polymer l l l l l lAcrylic l l l l l lWood l l l l l lC (GM | GMW) 24” 30”|36” 24” 18” 18” 30”|36”B (GM | GMW) 25-1/2”|31-1/2” (var) 19-1/2” (var) 25-1/2”|31-1/2” (var) 31-1/2”|37-1/2” (var) 31-1/2”|37-1/2” (var) 19-1/2” (var)A 12”- 12”- 6” 30” 30” 12”- 12”- 6” 30” 12”- 12”- 6”
MOTION
FINIS
H S
IDES
OPTIONS
SHELV
ES
CABINET
DIM
ENSIONS
HEIGHT
CONFIGURATIONS
Option description on page 29
CB
A
CBA
CB
A
CB
A
CBA
CB
A
26
VANITY CABINET
CODEDESCRIPTION
PHMEDECINE1 doors
PHMMEDECINE2 Mirror doors
PHH-MEDECINEhorizontal opening
WALL - HMLSwasher - dryer
WALL - HRM2 door wall with open
VANITY - V1P1 door
VANITY - V2P2 doors
Cabinet
Minimum Width 6” 18” 24” 24” 6” 21”
Maximum Width 21” 24”| 30”|36” 36” 36” 42” 24” 42”
Minimum Height 15” 9” 15” 21” 21” 21”
Maximum Height 36” 30” 15” 30” 42” 36” 36”
Minimum Depth 5-1/4” 7-1/4” 11-3/4” 8-1/4” 17-1/4” 17-1/4”
Maximum Depth 5-1/4” 14-7/8” 14-7/8” 14-7/8” 11-3/4” 20-1/4” 20-1/4”
L/R Hinges(Penture Gauche/Droite) l lMotion Doors (EBSU-MOTION_P) l l INCLUDED l l l lShelf Qty/cabinet 2 2 1 1 2 1 1
Additional shelf l l l l l l lNo Door(SANS_PORTE) l l l l l l
Glass door frame l l l l l lPlexi glass for door frame l l l l l l lFinish interiorDistinction interior finish l l l l l lNo Kick Plate(SCDPIED) l lPlastic or MetalLevelers l l
Wood OPEN SHELFAND SIDES
Vertical frontstretcher l
Melamine l l l l OPEN SHELFINCLUDED l l
Polymer l l l l l l
Acrylic l l l l l
Wood l l l l l lOnly available inpolymer finishes
8-3/8’’ open shelfheight interior kPv 5-3/4” kPv 5-3/4”
OPTIO
NS
CABIN
ET DIM
ENSIONS
MOTIO
NSH
ELV
ES
FIN
ISH S
IDES
Special note
Option description on page 29
27
VANITY CABINET
CODEDESCRIPTION
VANITY - VT3 drawers
LIGHTBOX - TL
LINEN - L3P3 doors
LINEN - L6P6 doors
LINEN - LS1PSuspended 1 door
LINEN - LS2PSuspended 2 doors
LINEN - L2P3T3 drawers, 2 doors
Cabinet
Minimum Width 9” 21” 12” 21” 12” 12” 12”Maximum Width 21” 48” 24” 36” 21” 24” 21”Minimum Height 21” 4-1/2” 60” 60” 36” 36” 60”Maximum Height 36” 12” 84” 84” 60” 60” 84”Minimum Depth 17-1/4” 12” 11-3/4” 11-3/4” 11-3/4” 11-3/4” 17-1/4”Maximum Depth 20-1/4” 15” 23-1/4” 23-1/4” 18-3/4” 18-3/4” 23-1/4”L/R Hinges(Penture Gauche/Droite) l l l lMotion Doors (EBSU-MOTION_P) l l l l lEconomotion Drawer(ECONOMOTION_T) l lEBSUMotion Drawer(EBSU-MOTION_T) l lWOODMotion Drawer(T_MOTION_BOIS) l lShelf Qty/cabinet 3 3 3 3 2
Additional shelf l l l l lNo Door (SANS_PORTE) l l l l l lGlass door frame l l l l lPlexi glass for door frame l l l l lFinish interiorDistinction interior finish l l l l l lNo Kick Plate(SCDPIED) l l l lPlastic or MetalLevelers l l l lWood l
Melamine l INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED
Polymer l l l l l lAcrylic l l l l l lWood l l l l l lConfig C 24” EQUAL 24” EQUAL 24” EQUALConfig B 24” EQUAL 24” EQUAL 24” EQUAL 24” EQUAL
Config A 24” 24” 24” EQUAL3 equal drawers Not available in
polymer or acrylic kPv 5-3/4” kPv 5-3/4” kPv 5-3/4”
MOTION
TABL
ETTE
SDI
MEN
SIONS
CAI
SSONS
CBA
CBA
CBA
B
A
Special notekPv 5-3/4”
CÔTÉ
S FINIS
OPTIONS
CONFIGURATIONS
HAUTEUR
Option description on page 29
24” EQUALDRAWERS
28
VANITY CABINET
CODEDESCRIPTION
VS1TSusp. 1 drawer
VS2TSusp. 2 drawers
VSE1T1 "U" shape drawer
VSE2T2 "U" shape drawers
CC3024Duct cover
VA9Angle 2 doors
VA12Angle 2 doors
Cabinet
Minimum Width 12” 12” 21” 21” 6”
Maximum Width 48” 48” 48” 48” 48” 9” 12”
Minimum Height 6” 15” 7-1/2” 15” 4-1/2” 15”
Maximum Height 15” 18” 18” 18” 24” 29-7/8” 24”
Minimum Depth 17-1/4” 18-3/4” 18-3/4” 18-3/4” 5-1/4”
Maximum Depth 20-1/4” 20-1/4” 20-1/4” 20-1/4” 20-1/4” 20-1/4” 20-1/4”
Motion Doors (EBSU-MOTION_P) l l
Motion Drawer INCLUDED INCLUDED INCLUDED INCLUDED
Finish interiorDistinction interior finish l l l l INCLUDED
Polymer l
Acrylic l
Wood l
Melamine l l l l
Polymer l l l l
Bois l l l l
Acrylic l l l l
Melamine INCLUDED
Polymer l l
Acrylic l l
Wood l l
Not assembled Cut corner9-1/8” x 9-1/8”
fix panel3-3/8” width
No kick plate
Cut corner9-1/8” x 9-1/8”
OPTIO
NS
FIN
ISH S
IDES
CABIN
ET DIM
ENSIONS
MOTION
FIX
PANELS
Special note
Option description on page 29
To support the weight of the suspended vanity, please use the duct cover (CC3024) available in custom dimensions
29
OPTION DESCRIPTION
LEFT/RIGHT HINGES(Penture Gauche/Droite)
FINISH SIDES
FINISH INTERIOR
FINISH INTERIOR DISTINCTION INTERIOR FINISH
WOOD OPTION
POLYMER OPTION
ACRYLIC OPTION
WIDTH
HEIGHT
DEPTH
NO KICK PLATE
NO DOORS
GLASS DOOR FRAME
ORGALINE OPTIONS
MOTION DOOR
ECONOMOTION DRAWERS
EBSUMOTION DRAWERS
WOODMOTION (MOTIONBOIS)
ELECTRIC OPENING
MOTION SLIDING SHELF
FIX TOP DRAWER FRONT
VERTICAL STRETCHER
RECESSED BACK PANEL
BROOM CABINET OPTION
OVEN PANEL
ADDITIONAL SHELF
DOUBLE BOTTOM SHELF
HANDLES
It is mandatory to mention door opening side to receive your cabinet as needed.The left hand opens a left side hinge; the door hinge is on the left.
Melamine finish sides are included in some cabinet and optional on all the other cabinet.wood, Acrylic, Glossy or Matte Polymer finish sides are optional on most cabinets (see exceptions in this spec book)
Available in melamine finishes, finished interiors in wood is not available.
The Distinction Collection doesn't allow the interior wood finish, 12 finish choice are available in melamineto replace the regular white melamine.
Replace the apparent melamine panels in finished wood panels.
Replace the apparent melamine panels in finished polymer panels.
Replace the apparent melamine panels in finished acrylic panels.
width adjustment is available on most of the cabinets, some exceptions apply.
Height adjustment is available on most of the cabinets, if a similar cabinet is available in a bigger size, use thebigger one to downsize instead of upsizing the smaller one available. It does not add or remove shelves. Please use the additional shelf option to increase the shelves quantity.
Depth adjustment does not add depth on drawers or shelves, only on the cabinet.
Cuts the base of the cabinet and add holes to receive the L4P levelers.
Option to have a box with no doors or drawer fronts, the option keeps all the hardware of the original cabinet.
Often use to install aluminum doors or a different finish to the cabinet.
Please note that open cabinets are available 100% finish in melamine and wood (code HUH or HUv).
The door will be prepared to receive the customer choice of glass or acrylic or one of our choice of acrylicinstalled on the glass frame door.
Glass not included.
Available with the EbSUMOTION Drawers.
Soft closing hinges. 110 degrees opening.
Add a soft closing system on the regular EbSU drawers.
full extension soft closing drawers.
full extension soft closing dovetail drawer in solid maple with a natural finish.
Available on the bTD (waste management cabinet), in quotation for all EbSUMOTION drawers and wall cabinetwith horizontal motion opening (HHS / HHP / HHf / HHO).
EbSUMotion fully extended opening shelf installed inside a base cabinet or pantry(Max 3 qty / item) and / or 2 qty per 30 ” height opening.
Remove the top drawer from the cabinet and make it fixed drawer front, used for cooking tops and deep sinks.
Rotate the front stretcher in vertical position to free space for the cooking top or sink installation.It keeps a strong cabinet structure and eases the installation of the kitchen sink.
Available in most cabinet, leave room to the ventilation ducts, plumbing or other obstacles.
4-1/2”or 6-1/2” recessed back panel, the top and bottom of the cabinet remains at the same depth as the sides.
Remove the fix shelf between the configuration A and b on the pantry #9 and #15 only.
Add the right size panel to install a wall oven in the cabinet.Select the panel type; melamine / wood / polymer / acrylic. Packed separately, included the fixing anchors.
Add one or several shelves in the selected cabinet.
Add a white 5/8” shelf at the bottom of the wall cabinet. The shelf as a "t" extrusion to make room for recessedlighting and electricity wire without adding a light valence.
Available for 11 3/4” deep wall cabinet, some exceptions applies.
Not available with the Recessed back panel option.
Available for all cabinets in individual selections or general selection for the entire project.
30
DRAWER SPECIFICATION
Metabox drawer offered in silky white finish.Drawer bottom and back panel made in 5/8’’white melamine.
Reinforcing adjusting tube for large drawers.available for cabinet depth; 17-1/4” to 23-1/4” Capacity : 20kg/drawer
Economotion system is available for Metabox drawers, offering the soft closing system at a very low price.
Soft closing full extension opening drawers for corner cabinet.Your utensils and dishes will come to you instead of bending and reaching for it offered in silky white finish.Drawer bottom and back panel made in 5/8’’white melamine.
*utensils divider sold separately
Soft closing full extension opening drawers Drawer bottom and back panel made in 5/8’’white melamine.Reinforcing adjusting tube for large drawers.Available for cabinet depth; 17-1/4” to 23-1/4” Orga-line accessories available for an orderly and efficient kitchenCapacity/Drawer : 35kg/small; 50kg/big EbSUMotion
Grace, consistency and durability.Our high end dovetail drawers will add value and class to your kitchen.A wise decision.Soft closing full extension opening drawers.Solid wood drawers in maple.Offered in natural finish.Drawer side height 3-1/2" or 9” depending on the drawer front heightMotionbois
*utensils divider not-included
31
OPTIONS ORGA-LINE
ORGA-LINE #1Dividers for drawers:
Heigth: 12” and 15”width: 24” to 36”2 separators and 4 dividers included.
It’s impossible to have too much space in the kitchen, the organizationand optimizing the space creates new storage solution.Storage Separators are available in EbSUMotion tall drawers.
ORGA-LINE #212” ustensils divider
5 stainless steel and hard grey plastic dishwasher proof interchangeable dividers. bien fixé dans un cadrage, les 5 contenants interchangeables en acier inoxydableet en plastique solide gris sont amovibles et vont au lave-vaisselle.
ORGA-LINE #3Adjustable plate rack (up to 12 plates)
Modern kitchens often have less or no cabinets on the walls.Storing the plates in drawers requires partitions and dividers (Orga-line # 1)or you could use these adjustable plate racks. Those will also facilitate dinnerin the garden terrace.
ORGA-LINE #4Cutlery and accessories dividers
Storing cookware, drawer pencils, calculator, paper block notes, elastic fasteners to find everything without thinking.Adjustable stainless steel separator and solid gray plastic 4 spacesis secured to the tray. Put one on the left and right in a largedrawer space and the center is a new compartment.
Orga-line options are available only with EBSUmotion drawers
32
ORGA-LINE OPTIONS
ORGA-LINE #512” spices rack (for 12” to 15” cabinet’)
Set of 2 racks and anchors
ORGA-LINE #615” spices rack (for 15” to 18” cabinet’)
Set of 2 racks and anchors
ORGA-LINE #718” spices rack (for 18” and up cabinet’)
Set of 2 racks and anchors.
* Do not include spices containers.
The ORGA-LINE spice holder securely holds receptacles and packets of all sizes. It can beeasily removed from the pull-out and put on the worktop or carried to the dining-table. The spice holder is also designed for dishwasher use. Now that's practical!
ORGA-LINE #8film dispenser
Isn't it annoying when you roll out your plastic wrap and it gets all stuck together? That's why we've developed our tangle-free film dispenser. The secret : The blum dispenser rod. It gives you a clean edge every time.The dispenser fits nicely into a drawer. Perfect with the orga-line #2, #4, #9.
ORGA-LINE #9foil dispenser
foil is exactly where it should be and immediately to hand in a foil dispenser. The dispenser fits nicely into a drawer. Perfect with the orga-line #2, #4, #8.
Orga-line options are available only with EBSUmotion drawers
33
WASTE MANAGEMENT CABINET - BTDfull extension EbSUMotion included
Servo-drive system available (electric opening).Open your waste management drawer with a small touch to the drawer front with your knee to open automatically.You must plan the space trash /recycling / compost takes in the kitchen design.
SPICE DRAWER (3 SHELVES) ADJUSTABLE UP TO 12” - BE6full extension EbSUMotion included
Capacity: 20 kg maximumMaterial : MetalEmbossed coating trays
Small spaces need to be optimized. This spice / oil /can storageis very profitable in efficiency and ergonomics.
See specifications for minimum widths on the selected door model.Minimum 7-1/2” de large pour contenant grand format.
WASTE MANAGEMENT CABINET,2X 38L BINS
WASTE MANAGEMENT CABINET,2X 38L ET 2X 8L BINS
OPTIMAL STORAGESOLUTIONS
34
CORNER DRAWERS - BCT39full extension EbSUMotion
visibility and easy access drawers maximizes ergonomics and allows youinstantly see what’s in it.
Models not available for the BCT39:beverlyHills/Malibu
Top drawer front only in slab for these models:Tradition/Madison/Sydney/Manhattan/barcelone
IMPORTANT:Do not place next to an appliance.Drawer opening requires a 6’’clearance minimum on both sides.
CAROUSEL TRAY FOR BLIND CORNER - TCBC4548 (LEFT/RIGHT)Available for blind corner cabinet bC45 et bC48
*** for a left door opening, choose the right mechanismfor a right door opening, choose the left mechanism
Capacity: maximum 20 kg/trayMaterial : plasticfull extensionIntegrated anti-slip coatingLength: 33-3/4” width: 15-15/16”
***for this option, the cabinet comes automatically with EbSUmotion hinges.
SOFT CLOSING INSIDE CABINET SHELVES - TC1221EM / TC2436EMfull extension slides EbSUmotion
EbSUMotion fully extended opening tablet installed inside a base cabinet or pantry(Max 3 qty / item) and / or 2 qty per 30” height opening.
1” spacer on both side of the sliding shelf to clear a regular door opening.
The internal sliding shelves allow accessible, flexible, efficientand ergonomic storage.
SOFT CLOSING INSIDE CABINET SHELVES FOR SINK CABINET - TCEV2436EMfull extension slides EbSUmotion
EbSUMotion “U” shape fully extended shelf releases the necessary plumbing space whileincreasing the storage solution of this often poorly organized cabinet.
OPTIMAL STORAGESOLUTIONS
35
GLASS DOOR FRAME
CLEAR ACRYLIC3mm thickness
FROSTED ACRYLIC3mm thicknessr
TEXTURED ACRYLIC3mm thickness
EbSU install acrylic on glass door frame.
POLYMER, POLYESTER AND WOOD GLASS DOOR FRAME
ACRYLIC TYPE AVAILABLE TO INSTALL ON SINGLE OR MULLION GLASS DOOR FRAME
*glass not included Check availability depending on models and dimensionsin this spec book
The door frame includes an installation strip.we offer 3 choices of acrylic (plexiglass) which will beinstalled on the EbSU door frames. Mullion areavailable in 4/6/8 tiles for polymer and wood doors.
36
WOOD DOOR PROFILE
MODEL PROFILS DESCRIPTIONS
Species: Maple, white Oak, birch, Cherry, walnutThickness: 3/4”Frame: Solid woodCentral Panel: Raised veneer Lamination on MDf
TRADITION
MADISON
IMPÉRIAL
CHÂTEAU
ANCESTRAL
HÉRITAGE
SILHOUETTE
MILAN
MANHATTAN
VIENNE
BARCELONE
SYDNEY
Species: Maple, white Oak, birch, Cherry, walnutThickness: 3/4”Frame: Solid woodCentral Panel: veneer on Plywood
Species: Maple, white Oak, birch, Cherry, walnutThickness: 3/4”Frame: Solid woodCentral Panel: veneer on Plywood
Species: Maple, white Oak, birch, Cherry, walnutThickness: 13/16”Frame: Solid woodCentral Panel: Raised veneer Lamination on MDf
Species: Maple, birch, CherryThickness: 3/4”Frame: Solid woodCentral Panel: veneer on Plywood
Species: Maple, white Oak, birch, Cherry, walnutThickness: 1-1/8”Frame: Solid woodCentral Panel: Raised veneer Lamination on MDf
Species: Maple, white Oak, birch, Cherry, walnutThickness: 15/16”Edge: Solid 1.4mmCentral Panel: Raised veneer Lamination on MDf
Species: Maple, white Oak, birch, Cherry, walnutThickness: 3/4”Edge: Solid 1.4mmCentral Panel: veneer on Particle board
Species: Maple, white Oak, birch, Cherry, walnutThickness: 3/4”Frame: Solid woodCentral Panel: veneer on Plywood
Species: Maple, white Oak, birch, Cherry, walnutThickness: 13/16”Frame: Solid woodCentral Panel: Solid wood
Species: Maple, white Oak, birch, Cherry, walnutThickness: 3/4”Frame: Solid woodCentral Panel: veneer on Plywood
Species: Maple, white Oak, birch, Cherry, walnutThickness: 1”Frame: Solid woodCentral Panel: veneer on Plywood
37
POLYMER DOOR PROFILE
JASPER SHAKER
SPA
SCANDINAVE
DENVERII
CONTOUR
PARA / SPIRA
CLASSIC
CHICAGO
RAISED
GROOVED
FLAT
RAISED
GROOVED
FLAT
38
DOOR AND DRAWER FRONT PROFILES
BE6 PROFILES HRV6 PROFILES
CHICAGO - SPA
SHAKER
CLASSIC
PARA
CONTOUR
JASPER - DENVER
SCANDINAVE
CHICAGO
SHAKER - SPA - PARA
CLASSIC
CONTOUR
JASPER - DENVER II
SCANDINAVE
39
MOULURES POLYMÈRE
OG
Width: 2-3/4” (69.85 mm)Thickness: 11/16” (0.688 mm) Length: 8’ (2.438 m) Material : MDf wrapped with polymer
OG1
Width: 3 1/8” (80 mm) Thickness: 11/16” (18 mm) Length: 8’ (20.32 cm) Material : MDf wrapped with polymer
CL
Width: 3”Thickness: 3/4”Length: 8’Material : MDf wrapped with polymer
OGEE
CROWN MOULDING
LIGHT MOULDING
MT
Height: 2-3/4” Thickness: 13/16” Length: 8’Material : MDf wrapped with polymer
MT1 (multi-moulding)
Crown moulding Ogee Light moulding
Height: 4”Thickness: 1”Length: 8’Material : MDf wrapped with polymer
MT2
Height: 3-1/2” Thickness: 1/2” Length: 8’Material : MDf wrapped with polymer
1 2 3
Please note that the non-visible part of the moulding may contain some imperfections which do not affect the visual when the installation is completed.
PL
Width: 4-1/2”Thickness: 5/8”Length: 8’Material : MDf wrapped with polymer
BASE MOULDING
40
POLYMER DECORATIVE PANEL ANNEX
« C » SHAPED PANEL
« G » SHAPED PANEL
« U » SHAPED PANEL
DECORATIVE PANELAvailable in Polymer
41
WOOD MOULDING
MTB
*Available in all the wood finishes
Width: 3-5/8” (92.075 mm)
Thickness: 13/16” (20.638 mm)
Length: 8’ (2.438 m)
Specie: Maple, white Oak, birch, Cherry, walnut
MT2
*Available in all the wood finishes
Width: 4-1/4” (107.8 mm)
Thickness: 13/16” (20.638 mm)
Length: 8’ (2.438 m)
Specie: Maple, white Oak, birch, Cherry, walnut
OGB
*Available in all the wood finishes
Width: 2-3/4” (69.85 mm)
Thickness: 13/16” (20.638 mm)
Length: 8’ (2.438 m)
Specie: Maple, white Oak, birch, Cherry, walnut
OGB1
*Available in all the wood finishes
Width: 3-1/2” (88.9 mm)
Thickness: 1/2” (12.7 mm)
Length: 8’ (2.438 m)
Specie: Maple, white Oak, birch, Cherry, walnut
OGB2
*Available in all the wood finishes
Width: 4-3/8” (11.113 cm)
Thickness: 3/4” (19.05 mm)
Length: 8’ (2.438 m)
Specie: Maple, white Oak, birch, Cherry, walnut
OGEE
CROWN MOULDING
***Wood is a natural product, finishes can vary from one door or moulding to another***
42
WOOD MOULDING
PLB
*Available in all the wood finishes
Width: 4-1/2” (11.43 cm)
Thickness: 3/4” (19.05 mm)
Length: 8’ (2.438 m)
Specie: Maple, white Oak, birch, Cherry, walnut
PLB2
*Available in all the wood finishes
Width: 4-1/2” (11.43 cm)
Thickness: 7/16” (11.113 mm)
Length: 8’ (2.438 m)
Specie: Maple, white Oak, birch, Cherry, walnut
CLB
*Available in all the wood finishes
Width: 2-1/2” (63.5 mm)
Thickness: 13/16” (20.638 mm)
Length: 8’ (2.438 m)
Specie: Maple, white Oak, birch, Cherry, walnut
CLB1
*Available in all the wood finishes
Width: 3” (76.2 mm)
Thickness: 13/16” (20.638 mm)
Length: 8’ (2.438 mm)
Specie: Maple, white Oak, birch, Cherry, walnut
LIGHT MOULDING
BASE MOULDING
***Wood is a natural product, finishes can vary from one door or moulding to another***
43
WOOD ACCESSORIES
P-01 DP-01 (sold in pair)
*Available in all wood colors.
Width P: 3-3/4” x 3-3/4”
Width DP: 1-3/4” x 3-3/4”
Height: 34-1/2”
Specie: Maple, white Oak, birch
P-02 DP-02 (sold in pair)
*Available in all wood colors.
Width P: 3-3/4” x 3-3/4”
Width DP: 1-3/4” x 3-3/4”
Height: 34-1/2”
Specie: Maple, white Oak, birch
P-03 DP-03 (sold in pair)
*Available in all wood colors.
Width P: 3-3/4” x 3-3/4”
Width DP: 1-3/4” x 3-3/4”
Height: 34-1/2”
Specie: Maple, white Oak, birch
WOOD LEG (P) AND HALF LEG (DP)
C-01
Dimension : 1-3/4” x 3” x 6”
C-02
Dimension : 5-1/4’’ x 9-1/2’’ x 4-1/2’’
C-03
Dimension : 7” x 13” x 5-1/2”
CORBEL
TABDECOWood decorative shelf
*Available in all the wood finishes
Width: 11 5/8’’ available
Lengthavailable: 24-1/4’’, 30-1/4’’, 41-7/8’’, 47-7/8’’
Depth: 1-3/4’’
Material : Maple wood veneer on lightweight panel. Anchor system included.
SHELF
Corbel made in ALDER
*** Available in all wood finishes.
44
DECORATIVE WOOD RANGE HOOD
Arched wood range hood
*Available in all the wood finishes
Specie: Maple
ITEM NO DECORATIVE WOOD RANGE HOOD
H-02-30 30-1/2” X 19-1/2” X 40-1/2”
H-02-36 38-1/2” X 19-1/2” X 40-1/2”
H-02-42 44-1/2” X 19-1/2” X 40-1/2”
H-02-48 50-1/2” X 19-1/2” X 40-1/2”
Decorative range hood
*Available in all the wood finishes
Specie: Maple
ITEM NO DECORATIVE RANGE HOOD
H-01-30 32-1/2” X 20-1/2” X 42-1/2”
H-01-36 38-1/2” X 20-1/2” X 42-1/2”
H-01-42 44-1/2” X 20-1/2” X 42-1/2”
H-01-48 50-1/2” X 20-1/2” X 42-1/2”
Decorative wood range hood for island
*Available in all the wood finishes
Specie: Maple
ITEM NO DECORATIVE WOOD RANGE HOOD FOR ISLAND
H-03-30 32-1/2” X 32-1/2” X 42-1/2”
H-03-36 38-1/2” X 32-1/2” X 42-1/2”
H-03-42 44-1/2" X 32-1/2" X 42-1/2”
H-03-48 50-1/2” X 32-1/2” X 42-1/2”
4 sides finished
45
ACCESSORIES
POLI-ACRYLICPolisher for acrylic.
It is recommended to apply the POLI-ACRYLIC polisher with a microfibre cloth as soonas the protective film is removed. This product is antistatic, it hardens the surface and increases the luster.
REPAR-ACRYLICAcrylic repair kit.
In case of scratches, apply the productREPA-ACRYLICand polish with a microfiber cloth.
EDGE50
50’ Edge-band Roll sold pre-glued if available.
If pre-glued edge is not available, regular edge-band requires contact adhesive or use the SPEEDTAPE
Thickness: 0.5 mm
SPEEDTAPE
50’ Double side tape used to fix EDGE50 when the edge band is not available Pre-Glued.
DEFLECTSS
Stainless Steel Heat deflectors 2” x 30-3/16” x 1/16”.
Sold in pairs. Mounting screws included.
QUARTZ-NET
Maintenance kit for EbSU QUARTZ.
46
ACCESSORIES
LEGS AND LEVELERS
EBSU-Pattes-1
kit ok 4 round metal legs
Height adjustment from 9-7/8” to 10-3/8”
1-1/2” diameter
L4P
kit of 4 plastic levelers.
Height adjustment from 4-1/2’’ to 6-1/2’’
fasteners to fix the kick plate included
L4M
kit of 4 metal legs.
Height adjustment from 4-1/2’’ to 5''
1-1/2” x 1-1/2” width
OTHER PRODUCTS
Wood Stains
TEINT1000 ml of wood stain
TEINT500500 ml of wood stain
TEINT250250 ml of wood stain
Wood stain pencil (CRAYON-TEINT)
Retouching pencil for wood stain.
Retouching pencil (CRAYON)
Retouching pencil for melamine.
ROLL-TH
Polymer roll 54” width x minimum 8’ longSold in square footage.
Installed with water-based contact cement.
47
WOOD DOOR MODELWood is a natural product, the colors and patterns may vary
MILAN MADISONCHATEAUSILHOUETTE
MANHATTAN VIENNESYDNEYIMPERIAL
BARCELONE HERITAGEGENEVETRADITION
wood veneer
Particle board CARb2*
wash as needed with a slightly moistened cloth with water and mild soap.
For all finishes : Do not use solvent or abrasive products.
Species: stained wood,sealed and finished with with two coats of 25% gloss lacquer.
A
BB
A
A
MODEL DESCRIPTION DETAILS MAINTENANCE
REGULAR FINISHES
CHAMPAGNE ANTIQUE
ANGELITE CHOCOLATE
VERISMO
Colours printed in this brochure may vary from original colours and from one material to another.
WATER-BASED STAIN
Wooden door, an ecological option finished using water-based products.
The ANTIQUE finish is not recommendedfor doors with raised or grooved panel.
Not available for Antique finish Not available for Antique finish
NEW
wood is a natural, noble and rich material. The color variants are highlighted.
*ENVIRONMENTAL POLICY AND INITIATIVES RELATED TO GREEN PRODUCTEbSU panels are certified for compliance below the CARb Phase 2 formaldehydeemission limit (0.09 ppm). valid up to 5 LEED credits.
CARB2
VOIR TOUS NOS FINIS SUR
www.ebsu.caWHITE
48
WOOD DOOR MODELSPECIFICATIONS
Drawer frontLess than 5-3/4’’; profiled slab only.
DoorLess than 7-3/8’’; profiled slab only.Glass door available from 8-7/8’’ in height or width.
Drawer frontLess than 5-7/8’’; profiled slab with moulding.
DoorLess than 5-7/8’’; profiled slab with moulding.Glass door available from 8-7/8’’ in height or width.
TRADITION BARCELONE ANCESTRAL
HERITAGE SILHOUETTE MILAN
CHATEAU MADISON IMPERIAL
MANHATTAN SYDNEY VIENNE
SPECIF
ICATI
ONS
Drawer frontLess than 5 7/8”: profiled slab only.5-7/8’’ to 8-7/8’’ height : 2 side frames reduced to 1-1/2’’.
DoorLess than 5-7/8’’; profiled slab only.Glass door available from 8-7/8’’ in height or width.
Drawer frontfull slab with rounded outline .Minimum 3’’ x 15’’.
Doorfull slab with rounded outline.Minimum 3’’ x 15’’.Glass door not available.
Drawer frontfull slab with rounded outline. Minimum 3’’ x 15’’.
Doorfull slab with rounded outline. Minimum 3’’ x 15’’.Glass door not available.
Drawer frontLess than 5-7/8’’; profiled slab with moulding.5-7/8’’ to 6-7/8’’; 4 frames reduced to 2-1/4’’ with flat center.6-7/8’’ to 8-7/8’’; 2 frames reducedto 2-1/4’’ with raised center.
DoorLess than 5 7/8’’; profiled slab with moulding. 5-7/8’’ to 6-7/8’’; 4 frames reduced to 2-1/4’’ with flat center.6-7/8’’ to 8-7/8’’; 4 frames reduced to 2-1/4’’ with raised center.Glass door available from 8-7/8’’ in height or width.
Drawer frontLess than 5-7/8’’; profiled slab only.
DoorLess than 5-7/8’’; profiled slab only.Glass door available from 8-7/8’’ in height or width.
Drawer frontLess than 5-7/8’’; profiled slab only.5-7/8’’ to 6-7/8’’ height; 2 side frames reduced to 1-3/4’’.
DoorLess than 5-7/8’’; profiled slab only.5-7/8’’ to 6-7/8’’ height; 2 side frames reduced to 2-1/4’’.Glass door available from 8-7/8’’ in height or width.
Drawer frontLess than 5-7/8’’; profiled slab only.5-7/8’’ to 6-7/8’’; 4 frames reduced to 2-1/4’’ with flat center.6-7/8’’ to 8-7/8’’; 4 frames reduced to 2-1/4’’ with raised center.
DoorLess than 5-7/8’’; profiled slab only.5-7/8’’ to 6-7/8’’; 4 frames reduced to2-1/4’’ with flat center.6-7/8’’ to 8-7/8’’; 4 frames reduced to 2-1/4’’ with raised center.Glass door available from 8-7/8’’ in height or width.
Drawer frontLess than 5-3/4’’; profiled slab only.
DoorLess than 8-7/8’’; profiled slab only.Glass door available from 8-7/8’’ in height or width.
Drawer frontLess than 5-3/4’’; profiled slab only.
DoorLess than 8-7/8’’; profiled slab only.Glass door available from 8-7/8’’ in height or width.
Drawer frontLess than 5-3/4’’; profiled slab only.
DoorLess than 7-3/8’’; profiled slab only.Glass door available from 8-7/8’’ in height or width.
49
Grace, consistency and durability. Our high end dovetail drawers will add valueand class to your kitchen.A wise decision.
Solid wood drawers in maple.Dovetail construction. Offered in natural finish.Please refer to ER0 colour code. Offered as an option on all EbSU cabinets.Comes with EbSU soft closing slide.
Colours printed in this brochure may vary from original colours and from one material to another.
MAPLE
SOLID WOOD DRAWER
ER0 ( NATURAL ) ER1 ER2
ER3 ER4 ER5
CH0 ( NATURAL ) CH1 CH2
CH3 CH4 CH5
ME0 ( NATURAL ) ME1 ME2
ME3 ME4 ME5
WALNUT CHERRY
NY10 ( NATURAL ) CE20 ( NATURAL )
MILAN MADISONCHATEAUSILHOUETTE
MANHATTAN VIENNESYDNEYIMPERIAL
BARCELONE HERITAGEGENÈVETRADITION
WHITE OAK
BIRCH
WOOD DISTINCTION FINISHESAvailable in all wood models
NEW
Your wOOD kITCHENtook nearly 85 YEARS to grow.
It will REMAIN ALIvEin theHEART OF YOUR HOME.
WATER-BASED STAIN Wooden door, an ecological option
finished using water-based products.
50
ALUMINUM DOOR MODEL
OSLO STOCKHOLM HELSINKI
LACOBEL ONLYNO HANDLE
SCREEN WHITE ACID
AVAILABLE GLASS CHOICES
LACOBEL BLANC (OSLO ONLY)
Frame: 2.5 mmMinimum width: 8-7/8”Minimum height: 8-7/8”Thickness: 13/16”Material : Aluminum brushed finish
*Lacobel glass included.
Frame: 2”Minimum width: 8-7/8”Minimum height: 8-7/8”Thickness: 5/8”Material : Aluminum brushed finish
*white acid or screen glass choice.
Frame: 2”Minimum width: 8-7/8”Minimum height: 8-7/8”Thickness: 5/8”Material : Aluminum brushed finish
*white acid or screen glass choice.
OSLO STOCKHOLM HELSINKI
SPECIF
ICATI
ONS
51
ACRYLIC DOOR MODEL
Acrylic (1mm)
MDf CARb2*
white melamine
wash as needed with an all purpose cleaner ora slightly moistened cloth with water and mild soap.
For all finishes : Do not use solvent or abrasive products.
This product can be polishedwith a sponge and creamprovided for this purpose to fix scratches.
A
B
CB
A
C
MODEL DESCRIPTION DETAILS MAINTENANCE
POLI-ACRYLIC
Polisher for acrylic.
It is recommended to apply the POLI-ACRYLIC polisher witha microfibre cloth as soon as the protective film is removed. This product is antistatic, it hardensthe surface and increases the luster.
Colours printed in this brochure may vary from original colours and from one material to another.
WHITE GREY BLACK
RIGA MINSK KIEV DOOR WITH 2 TONE DOORS EDGE BAND
Color match edge band for acrylic panels
*No interior finish or glass door available in acrylic.
*ENVIRONMENTAL POLICY AND INITIATIVES RELATED TO GREEN PRODUCTEbSU panels are certified for compliance below the CARb Phase 2 formaldehyde emission limit (0.09 ppm).valid up to 5 LEED credits.
CARB2
REPAR-ACRYLIC
Acrylic repair kit.
In case of scratches, apply the productREPA-ACRYLIC and polish with a microfiber cloth
52
PORTES POLYESTER 5 PIÈCES
*ENVIRONMENTAL POLICY AND INITIATIVES RELATED TO GREEN PRODUCTEbSU panels are certified for compliance below the CARb Phase 2 formaldehyde emission limit (0.09 ppm).valid up to 5 LEED credits.
CARB2
SEE AVAILABLE FINISHES FOR POLYESTER ON PAGE 53
Colours printed in this brochure may vary from original colours and from one material to another.
Choice of color on molded profile
MDf CARb2*
wash as needed with an all purpose cleaner or a slightly moistened cloth with water and mild soap.
For all finishes : Do not use solvent or abrasive products.
Tolerance to gauchiement.Resistant to scratches, fading and stains.5 pieces assembly Realistic imitation of wood.
A
BB
A
A
BEVERLY HILLSMALIBU
SANTA MONICASANTA CRUZ
MODEL DESCRIPTION DETAILS MAINTENANCE
Drawer front2-1/4” x 3/4” frame thickness. Minimum height 5-1/4” Minimum width 6’’
Door2-1/4” x 3/4” frame thickness.
Minimum width 6’’ for beverly Hills 7-3/4” for Malibu.
Melamine door/drawer frontstyle if minimum size doesn’tallow the polyester door.
Drawer front2-1/2”x 7/8”frame thickness.Minimum height 5-7/8”Minimum width 6-1/2”
Door2-1/2”x 7/8”frame thickness.
Minimum width 6-1/2” for Santa Monica7-3/4” for Santa Cruz.
Melamine door/drawer frontstyle if minimum size doesn’tallow the polyester door.
BEVERLY HILLS/MALIBU SPECIFICATIONS
90O ASSEMBLY 45O ASSEMBLY
90O ASSEMBLY 45O ASSEMBLY
Horizontal grain available for panels 48“ and less.
SANTA MONICA/SANTA CRUZ SPECIFICATIONS
Profile
Profile
53
POLYESTER 5 PIECESDOOR MODEL
Colours printed in this brochure may vary from original colours and from one material to another.
PURE ESCAPADE NATURE COSY CONTRÉE FESTIF INTIMITÉ
REGULAR FINISHES
SOLID FINISHES
SYNCHRO FINISHES
TEXTURED FINISHES
ANTIQUE CHOCOLATE
WHITE CHAMPAGNE
VIEW ALL OURFINISHES ON
www.ebsu.ca
TEXTURED VERISMO SUROÎT RETRO
Not available forSanta Cruz model
Not available forSanta Cruz model
NEW
54
FLAT GROOVED
CLASSIC
RAISED
*ENVIRONMENTAL POLICY AND INITIATIVES RELATED TO GREEN PRODUCTEBSU panels are certified for compliance below the CARB Phase 2 formaldehyde emission limit (0.09 ppm).Valid up to 5 LEED credits.CARB2
Colours printed in this brochure may vary from original colours and from one material to another.
Suggested product
DEFLECTSSStainless Steel Heat deflectors 2” x 30-3/16” x 1/16”.
Sold in pairs. Mounting screws included.
SEE AVAILABLE FINISHES FOR POLYESTER ON PAGE 58
POLYMER 5 PIECESDOOR MODEL
White melamine interior door
Warping warrantied for 42” door and under (accepted tolerance of 3/16”).
Horizontal grain available for max 48” height.
Drawer front and door
2-7/8” frame at 45°
Less than 5-7/8”: profiled slab only.
5-7/8” to 8-7/8”: 4 reduced frames to 2-1/4” (flat center).
See details on page 38 for BE6 & HRV6 cabinet facing.
***Raised Exceptions***
5-7/8” to 6-7/8”: 4 reduced frames to 2-1/4” with a flat center.
6-7/8” to 8-7/8”: 4 reduced frames to 2-1/4” with a raised center.
Glass door available from 8-7/8” in height or width
SPECIFICATIONS
Polymer color choice
MDFCARB2
White melamine
Wash as needed with aslightly moistened cloth with water and mild soap.
For all finishes : Do not use solvent or abrasive products.
Flexible polymer stuckunder pressure allowing a variety of model.High definition pattern.B
A
C
A
B
C
MODEL DESCRIPTION DETAILS MAINTENANCE
55
POLYMER DOOR MODELS
PARA SPIRACONTOUR
FLAT FLAT Recessed handleincluded
NEIGE TITANE FURTIF
Available in CONTOUR - PARA - SPIRA model
MATE FINISHES
SEE AVAILABLE FINISHES FOR POLYESTER ON PAGE 58
Colours printed in this brochure may vary from original colours and from one material to another.
White melamine interior doorWarping warrantied for 42” door and under(accepted tolerance of 3/16”).Horizontal grain available for max 48” height.Glass door available from 8-7/8” in height or width
See details on page 38 for BE6 & HRV6 cabinet facing.
Suggested product
DEFLECTSSStainless Steel Heat deflectors 2” x 30-3/16” x 1/16”.
Sold in pairs. Mountingscrews included.
Door model with rounded outline. Minimum of 3” width and 15” high.
BC33/36 and BCT39 : 3 sides rounded outline.
All sizes available. Door model with rounded outline.Minimum of 8 7/8” width and 4” high.
Note :Not available for BE6 cabinet the EBSU-DECOR-1065 pull will replace the recessed handle.No glass door available.
CONTOUR PARA SPIRA
SPECIF
ICATI
ONS
56
POLYMER DOOR MODELS
FLAT GROOVED RAISED
FLAT GROOVEDFLAT GROOVED RAISED
SPA CHICAGO
SHAKER
Colours printed in this brochure may vary from original colours and from one material to another.
SEE AVAILABLE FINISHES FOR POLYESTER ON PAGE 58
Drawer Front2-1/4” frame.Less than 5-7/8”: profiled slab only.5-7/8” to 8-7/8” height (exclusively) : 2 side frames reduced to 1-3/4”.7-3/8” and up : 4 regular side frames.
Door2-1/4” frame.6-7/8” width and more; raised model5-7/8 to 6-7/8” width; flat modelWidth less than 5-7/8”profiled slab only.Minimum for glass doorto 8-7/8” W and 8-7/8” H.
Drawer Front3-1/4” frame.Less than 5-7/8”: profiled slab only.5-7/8” to 6-7/8” height (exclusively) : 2 side frames reduced to 1-3/4”.
Door3-1/4” frame.Less than 5-7/8”: profiled slab only.5-7/8” to 6-7/8” height (exclusively) : 2 side frames reduced to 2-1/4”.Minimum for glass door to 8-7/8” W and 8-7/8” H.
Drawer Front2-1/4” frame. Less than 8-7/8” height (exclusively) : 2 side frames reduced to 1-3/4”. Less than 5-7/8”: profiled slab.
Door2-1/4” frame. Less than 5-7/8”: profiled slab.Minimum for glass door to 8-7/8” W et 8-7/8” H.
SHAKER SPA CHICAGO
SPECIF
ICATI
ON
S
White melamine interior doorWarping warrantied for 42” door and under (accepted tolerance of 3/16”).Horizontal grain available for max 48” height.
See details on page 38 for BE6 & HRV6 cabinet facing.
Suggested product
DEFLECTSSStainless Steel Heat deflectors 2” x 30-3/16” x 1/16”.
Sold in pairs. Mounting screws included.
57
POLYMER DOOR MODELS
SCANDINAVE
GROOVED CATHEDRALARCHED STANDARD
GROOVED CATHEDRALARCHED STANDARD
DENVERII
GROOVED CATHEDRALARCHED STANDARD
JASPER
Colours printed in this brochure may vary from original colours and from one material to another.
SEE AVAILABLE FINISHES FOR POLYESTER ON PAGE 58
2-1/4” frame
White melamine interior door
Warping warrantied for 42” doorand under (accepted tolerance of 3/16”).Horizontal grain available for max 48" height.
Drawer front
Less than 5-3/4” profiled slab only.5-3/4” to 7-3/8” height (exclusively) :2 side frames reduced to 1-3/4”7-3/8” and up:4 regular side frames.
Door
Width less than 8”: profiled slab only.
Cathedral or Arched models
Available only from 8-7/8” widthand 8-1/8’’ height door and up.
Indicate the L/R hinge side.See details on page 38 for BE6 & HRV6 cabinet facing.
Suggested product
DEFLECTSSStainless Steel Heat deflectors 2” x 30-3/16” x 1/16”.
Sold in pairs. Mounting screwsincluded.
SPECIFICATIONS
58
POLYMER DOOR MODELS
PURE ESCAPADE NATURE COSY CONTRÉE FESTIF INTIMITÉ
TEXTURED WHITE SUROÎT
REGULAR FINISHES
SOLID FINISHES
TEXTURED FINISHES
ANTIQUE CHOCOLATE VERISMO
ARGILE ANGELITE ARDOISEWHITE WHITE WOOD GRAIN CHAMPAGNE
Colours printed in this brochure may vary from original colours and from one material to another.
VIEW ALL OURFINISHES ON
www.ebsu.ca
SYNCHRO FINISHESNEW
NEW
NEW
59
TEXTURED AND SOLID MELAMINE DOORS
MELAMINE | 1mm edge
PURE NATURE
CONTRÉE FESTIF
INTIMITÉ
COSY
ESCAPADE
MELAMINE | 1mm edge
BLANC ABSINTHE
SAMBUCCA VERISMO TEXTURÉ
SUROÎT
RETRO
FRESCA
5/8’’ Melamine doors.
No glass door.
warping warrantied for 42” door and under (± 1/16”).
Horizontal grain available for max 48" height.
SPECIFICATIONS
TEXTURED FINISHESSYNCHRO FINISHES
*ENVIRONMENTAL POLICY AND INITIATIVES RELATED TO GREEN PRODUCTEbSU panels are certified for compliance below the CARb Phase 2 formaldehyde emission limit (0.09 ppm).valid up to 5 LEED credits.
CARB2
Colours printed in this brochure may vary from original colours and from one material to another.
NEW
Color choice
Particle board CARb2*
wash as needed with an all purpose cleaner or a slightly moistened cloth with water and mild soap.
For all finishes : Do not use solvent or abrasive products.
Textured Melaminewith superior resistance toscratches and finger marks.High definition pattern.
A
BB
A
A
MODEL DESCRIPTION DETAILS MAINTENANCE
60
STANDARD MELAMINE DOORS
MELAMINE | 1mm edge
ANTIQUE VERISMOCHOCOLAT
5/8’’ Melamine doors.
No glass door.
warping warrantied for 42” door and under (± 1/16”).
Horizontal grain available for max 48" height.
WHITE CHAMPAGNEWHITEWOOD GRAIN
ARGILE ARDOISEANGELITE
MELAMINE | 1mm edge
SOLID FINISHES
REGULAR FINISHES SPECIFICATIONS
*ENVIRONMENTAL POLICY AND INITIATIVES RELATED TO GREEN PRODUCTEbSU panels are certified for compliance below the CARb Phase 2 formaldehyde emission limit (0.09 ppm).valid up to 5 LEED credits.
CARB2
Colours printed in this brochure may vary from original colours and from one material to another.
NEW
Color choice
Particle board CARb2
wash as needed with an all purpose cleaner or a slightly moistened cloth with water and mild soap.
For all finishes : Do not use solvent or abrasive products.
Durable Melamine.High definition pattern.
A
BB
A
A
MODEL DESCRIPTION DETAILS MAINTENANCE
61
MELAMINE FINISHES LIST
COLOR NO MELAMINE REGULAR FINISHES EDGE BAND - 0.5MM
CHOCOLATE - CO Glow sand wf228 flakeboard & Chocolate Pear tree L444 Tafisa Pre Glued
ANTIQUE - AN Old antique white L-475 Tafisa Pre Glued
VERISMO - VE verismo wf202 flakeboard Pre Glued
COLOR NO MELAMINE SOLID FINISHES EDGE BAND - 0.5MM
WHITE - BL white w300 flakeboard or 300 Uniboard Pre Glued
WOOD GRAIN - WG/TH white wood grain w400 flakeboard Pre Glued
CHAMPAGNE - CA Ivory T629 flakeboard / victorian white Sf100 flakeboard Pre Glued
ARGILE - ARG willow grey 802 Uniboard Speedtape+Edge50
ARDOISE - ARD Charbon 123 Uniboard Speedtape+Edge50
ANGELITE - ANG Canadien grey 168 Uniboard Speedtape+Edge50
COLOR NO MELAMINE TEXTURED FINISHES EDGE BAND - 0.5MM
TEXTURED WHITE - BLX wjite w300 flakeboard - Medina Speedtape+Edge50
FRESCA - FRX Arctic Groovz wf394 flakeboard - Medina Speedtape+Edge50
TEXTURED VERISMO - VEX verismo wf202 flakeboard - Medina Speedtape+Edge50
ABSINTHE - ABX Pewter Pine wf377 flakeboard - Sawcut Speedtape+Edge50
SUROÎT - SRX Suroît L535 Tafisa - Alto Speedtape+Edge50
SAMBUCCA - SAX Linear Ash wf368 flakeboard - Sawcut Speedtape+Edge50
RETRO - RTX vintage H66 Uniboard - Rio Speedtape+Edge50
COLOR NO MELAMINE SYNCRO FINISHES EDGE BAND - 0.5MM
PURE - PUY bain de neige M2004 viva/Tafisa
COSY - CSY Tea for Two M2006 viva/Tafisa
FESTIF - FEY brunch festif M2005 viva/Tafisa
INTIMITÉ - INY Tête à Tête M2001 viva/Tafisa
ESCAPADE - ESY Nizza k13 Riviera Oak/Uniboard
NATURE - NAY Mistral k14 Riviera Oak/Uniboard
CONTRÉE - CTY Esterel k16 Riviera Oak/Uniboard
62
DRILLING CHOICE
The choice of drilling 8mm is the standard drilling for hinges used for EbSU cabinets.
The standard distance is 5 inches from the center of the hinge to the edge of the door.
This distance may be varied but it must be of identical top and bottom of the door.
The choice of drilling "pointing" is the hole for a replacement screwed hinge.
The standard distance is 5 inches from the center of the hinge to the edge of the door.
This distance may be varied but it must be of identical top and bottom of the door.
***ALL CUSTOM DOOR MODELS CAN BE ORDERED WITH OR WITHOUT DRILLING.
STANDARD
POINTING (POINTAGE)
63
BLANCO - BLC ARGILE - AGC ARDOISE - ADC
ROCHER - ROC RETRO - RTX SUROÎT - SRX
EURO LAMINATE PANEL1-1/2” Thickness
Laminate
Laminate is a product of mixedpaper and resin heat pressed.
Maintenance
for daily cleaning, simply use a damp soft tissue with light soap.Rince with hot water.
Do not use abrasive cleaners or corrosive products.
SPECIFICATIONS
P-EUROAvailable in these 6 finishes.white melamine interior panel.
64
HANDLES
REGULAR FINISHES
MATE BLACK WROUGHT IRON MATE ANTIQUE IRON BRUSHED SATIN NICKEL MATE ANTIQUE BRASS POLISHED CHROME SATIN CHROME
MODEL EBSU-DECOR FINISH CODE WIDTH HOLES DISTANCE
100310111017
Mate BlackWrought Iron
Brushed Satin Nickel144 mm 64 mm
1026Mate Antique BrassMate Antique Iron 143 mm 3”
10041010101810251028
Mate BlackWrought Iron
Brushed Satin NickelMate Antique BrassMate Antique Iron
32 mm
100510121021
Mate BlackWrought Iron
Brushed Satin Nickel106 mm 96 mm
100610131020
Mate BlackWrought Iron
Brushed Satin Nickel32 mm
10301031
Brushed Satin NickelPolished Chrome
102 mm 96 mm
1033 Brushed Satin Nickel 28 mm
1034 Brushed Satin Nickel 126 mm 96 mm
10351036
Brushed Satin NickelPolished Chrome 36 mm
1038 Polished Chrome
1039Polished
and Satin Chrome
65
HANDLES
REGULAR FINISHES
MATE BLACK WROUGHT IRON MATE ANTIQUE IRON BRUSHED SATIN NICKEL MATE ANTIQUE BRASS POLISHED CHROME SATIN CHROME
MODEL EBSU-DECOR FINISH CODE WIDTH HOLES DISTANCE
1040 Antique Iron
1042 Brushed Satin Nickel 28 mm
1043 Brushed Satin Nickel 108 mm 96 mm
1045 Brushed Satin Nickel 44 mm
104410461047
Brushed Satin Nickel 46 mm
104810491050
Brushed Satin Nickel5-3/8”252 mm284 mm
3“192 mm224 mm
105110521053105410551056
Brushed Satin Nickel
380 mm444 mm508 mm636 mm796 mm920 mm
320 mm384 mm448 mm576 mm736 mm860 mm
1069 Brushed Satin Nickel
1071 Brushed Satin Nickel 4-9/32” 3-25/32”
1072 Brushed Satin Nickel 7-15/16” 7-9/16”
Recommended