Day 2, August 23rd Day 1 Day Science Starters Sheet 1. Please have these Items on your desk. AR Book...

Day 2, August 23rd Day 1 Day

ScienceStarters Sheet1. Please have these

Items on your desk.

ARBook

Science Starter: Vocabulary Words onthe science starter page and on an index card.

MitochondrionChloroplastVacuoleGolgi Body Science Starter: Copy 5 words and definitions to index cards.1.Cell Wall2.Nucleus

Agenda

August 26, 2013

Plant & Animal

Cell Drawing

Microscope Basics

1. Ocular lens(Eyepiece)

1. Ocular lens(Eyepiece)2. Body Tube

1. Ocular lens(Eyepiece)2. Body Tube

3. NosepieceHolds the HIGH- and LOW-

power objective LENSES; can be rotated

to change MAGNIFICATION.

1. Ocular lens(Eyepiece)2. Body Tube

3. NosepieceHolds the HIGH- and LOW-

power objective LENSES; can be rotated

to change MAGNIFICATION.

4. OBJECTIVE LENSESMagnification ranges from

10 X to 40 X

1. Ocular lens(Eyepiece)2. Body Tube

3. NosepieceHolds the HIGH- and LOW-

power objective LENSES; can be rotated

to change MAGNIFICATION.

4. OBJECTIVE LENSESMagnification ranges from

10 X to 40 X

5. STAGE CLIPSHOLD the slide in place

1. Ocular lens(Eyepiece)2. Body Tube

3. NosepieceHolds the HIGH- and LOW-

power objective LENSES; can be rotated

to change MAGNIFICATION.

4. OBJECTIVE LENSESMagnification ranges from

10 X to 40 X

5. STAGE CLIPSHOLD the slide in place

6. DIAPHRAGMRegulates the amount of

LIGHT on the specimen

1. Ocular lens(Eyepiece)2. Body Tube

3. NosepieceHolds the HIGH- and LOW-

power objective LENSES; can be rotated

to change MAGNIFICATION.

4. OBJECTIVE LENSESMagnification ranges from

10 X to 40 X

5. STAGE CLIPS HOLD the slide in place

6. DIAPHRAGM Regulates the amount of LIGHT on the specimen

7. LIGHT SOURCE Projects light UPWARDS through the diaphragm, the SPECIMEN, and the LENSES

1. Ocular lens(Eyepiece)2. Body Tube

3. NosepieceHolds the HIGH- and LOW-

power objective LENSES; can be rotated

to change MAGNIFICATION.

4. OBJECTIVE LENSESMagnification ranges from

10 X to 40 X

5. STAGE CLIPS HOLD the slide in place

6. DIAPHRAGM Regulates the amount of LIGHT on the specimen

7. LIGHT SOURCE Projects light UPWARDS through the diaphragm, the SPECIMEN, and the LENSES

8. BASE Supports the MICROSCOPE

1. Ocular lens(Eyepiece)2. Body Tube

3. NosepieceHolds the HIGH- and LOW-

power objective LENSES; can be rotated

to change MAGNIFICATION.

4. OBJECTIVE LENSESMagnification ranges from

10 X to 40 X

5. STAGE CLIPS HOLD the slide in place

6. DIAPHRAGM Regulates the amount of LIGHT on the specimen

7. LIGHT SOURCE Projects light UPWARDS through the diaphragm, the SPECIMEN, and the LENSES

8. BASE Supports the MICROSCOPE

9. FINE ADJUSTMENT KNOB Moves the stage slightly to SHARPEN the image

1. Ocular lens(Eyepiece)2. Body Tube

3. NosepieceHolds the HIGH- and LOW-

power objective LENSES; can be rotated

to change MAGNIFICATION.

4. OBJECTIVE LENSESMagnification ranges from

10 X to 40 X

5. STAGE CLIPS HOLD the slide in place

6. DIAPHRAGM Regulates the amount of LIGHT on the specimen

7. LIGHT SOURCE Projects light UPWARDS through the diaphragm, the SPECIMEN, and the LENSES

8. BASE Supports the MICROSCOPE

9. FINE ADJUSTMENT KNOB Moves the stage slightly to SHARPEN the image

10. COARSE ADJUSTMENT KNOBMoves the stage up and down for FOCUSING

1. Ocular lens(Eyepiece)2. Body Tube

3. NosepieceHolds the HIGH- and LOW-

power objective LENSES; can be rotated

to change MAGNIFICATION.

4. OBJECTIVE LENSESMagnification ranges from

10 X to 40 X

5. STAGE CLIPS HOLD the slide in place

6. DIAPHRAGM Regulates the amount of LIGHT on the specimen

7. LIGHT SOURCE Projects light UPWARDS through the diaphragm, the SPECIMEN, and the LENSES

8. BASE Supports the MICROSCOPE

9. FINE ADJUSTMENT KNOB Moves the stage slightly to SHARPEN the image

10. COARSE ADJUSTMENT KNOBMoves the stage up and down for FOCUSING

11. STAGESupports the SLIDE being viewed

1. Ocular lens(Eyepiece)2. Body Tube

3. NosepieceHolds the HIGH- and LOW-

power objective LENSES; can be rotated

to change MAGNIFICATION.

4. OBJECTIVE LENSESMagnification ranges from

10 X to 40 X

5. STAGE CLIPS HOLD the slide in place

6. DIAPHRAGM Regulates the amount of LIGHT on the specimen

7. LIGHT SOURCE Projects light UPWARDS through the diaphragm, the SPECIMEN, and the LENSES

8. BASE Supports the MICROSCOPE

9. FINE ADJUSTMENT KNOB Moves the stage slightly to SHARPEN the image

10. COARSE ADJUSTMENT KNOBMoves the stage up and down for FOCUSING

11. STAGESupports the SLIDE being viewed

12. ARM Used to SUPPORT the microscope when carried

1. Ocular lens(Eyepiece)2. Body Tube

3. NosepieceHolds the HIGH- and LOW-

power objective LENSES; can be rotated

to change MAGNIFICATION.

4. OBJECTIVE LENSESMagnification ranges from

10 X to 40 X

5. STAGE CLIPS HOLD the slide in place

6. DIAPHRAGM Regulates the amount of LIGHT on the specimen

7. LIGHT SOURCE Projects light UPWARDS through the diaphragm, the SPECIMEN, and the LENSES

8. BASE Supports the MICROSCOPE

9. FINE ADJUSTMENT KNOB Moves the stage slightly to SHARPEN the image

10. COARSE ADJUSTMENT KNOBMoves the stage up and down for FOCUSING

11. STAGESupports the SLIDE being viewed

12. ARM Used to SUPPORT the microscope when carried

What happens as the power of magnification increases?

Power = 10 x 4 = 40 Power = 10 x 10 = 100 Power = 10 x 40 = 400

Comparing Powers of Magnification

We can see better details with higher the powers of magnification, but we cannot see as much of the image.

Which of these images would be viewed at a

higher power of magnification?

Let’s give it a try ...

1 – Turn on the microscope and then rotate the nosepiece to click the low objective into place.

2 – Place a slide on the stage and secure it using the stage clips. Use the coarse adjustment knob (large knob) to get it the image into view and then use the fine adjustment knob (small knob) to make it clearer.

4 – When you are done, turn off the microscope, lower stage and move back to low lens

3 – Once you have the image in view, rotate the nosepiece to view it under different powers.

Be careful with the largest objective! Sometimes there is not enough room and you will not be able to use it!

How to make a wet-mount slide …

1 – Get a clean slide and coverslip from your teacher.

2 – Place ONE drop of water in the middle of the slide. Don’t use too much or the water will run off the edge and make a mess!

3 – Place the edge of the cover slip on one side of the water drop.

You do not need to use the stage clips when viewing wet-mount slides!

5 – Place the slide on the stage and view it first with the low objective. Once you see the image, you can rotate the nosepiece to view the slide with the different objectives.

4 - Slowly lower the cover slip on top of the drop.

Cover Slip

Lower slowly

Now we will go to the lab stations and practice whatwe just wrote notes about.

Listen for directions and look on the screen

Lab Activity

Microscope basics: Complete both the front and back side of the hand-out

Cheek Cell Onion Cell