View
1
Download
0
Category
Preview:
Citation preview
PRODUCTSENGINE DRIVEN PUMPS
redlionproducts.com | Hotline: 1.888.885.92542
With over 80 years of experience, Red Lion is the leader in water transfer pumps. Count on Red Lion to help you select the best well pump for your needs.
Red Lion Pumps
The majority of gasoline powered pumps sold in North America are referred to as general purpose, utility, or transfer pumps. This is simply moving liquid from one point to another. Pump construction can be a variety of materials. Preference is given to lightweight materials and portability.
What does an Engine Driven Pump do?
Types of Engine Driven Pumps
Pumps designed to handle today's agricultural chemicals (fertilizer, herbicides, and pesticides) would fall into this category. Construction is either a poly derivative or cast iron. Aluminum is usually not used as it does not provide strong chemical resistance. Solids handling is not required. The seal elastomer is usually EPDM or fluoroelastomer.
Agricultural
A pump is considered semi-trash if it has some solids handling capabilities. The pump impeller is usually semi-open vane clearance to pass a spherical solid ½" to ¾" diameter. The mechanical seal faces are usually of a hard material like silicon carbide for abrasion resistance. Typical applications are drainage, construction dewatering, etc.
* All references to Self-priming requires an initial fill of water. No additional priming is required after the initial fill.
Semi-Trash
Similar in application to a semi-trash pump, except that solids handling is typically 50% of suction port size (usually greater than 1" solids). Most manufacturers allow for a removable casing to allow access to internal hydraulics for cleaning and repair.
Trash
3
GAS ENGINE DRIVE
Category Construction Application Examples
General PurposePoly
AluminumCast Iron
Water TransferFlood Control
AgriculturalPoly
AluminumCast Iron
Chemical Transfer (Fertilizer)Nurse Trailer
Solids HandlingAluminumCast Iron
ConstructionSemi-Trash
Trash
High PressureAluminumCast Iron
IrrigationFire Fighting
6RLPG-2U - Agriculture
6RLAG-2LST - Solids Handling
2RLAG-1L - General Purpose
redlionproducts.com | Hotline: 1.888.885.92544
• Durable cast iron, semi-open style impeller
• Lightweight aluminum construction with base and handle for portability
• Self-priming* to 25' of suction lift
• Built-in check valve
• EPA certified
• Includes 1'' adapter
Aluminum Water Transfer Pump2RLAG-1L
Model ItemMax Flow
Max Head
Suction Lift
Suction/Discharge Size
Fuel Tank
Engine
2RLAG-1L 617031 60 gpm 79' 25'1.5" x 1.5"
MNPT1.7 qt
Air Cooled, 4 Stroke, OHV (79cc)
Priming Port
Cast Iron Internal Volute
Cast Iron Impeller
Carbon/Ceramic Mechanical Seal
Lightweight Aluminum Pump Housing
Drain Plug
1-1/2" MNPT Discharge
1-1/2" MNPT Suction
Built-in Check Valve
This pump is designed for pumping water only.
Ideal for general purpose use where portability is required such as liquid transfer and contractor dewatering applications
5
GAS ENGINE DRIVE
Aluminum Water Transfer Pump
• Powered by commercial grade Honda GX120 engine
• Durable cast iron, semi-open style impeller
• Lightweight aluminum outer casing includes heavy-duty roll frame
• Self-priming* to 25' of suction lift
• Built-in check valve
• EPA certified
4RLAG-2H
Model ItemMax Flow
Max Head
Suction Lift
Suction/Discharge Size
Fuel Tank
Engine
4RLAG-2H 617056 150 gpm 98' 25' 2" x 2" MNPT 2.1 qtHonda GX120, Air Cooled, 4 Stroke,
OHV (118cc)
Powered by HONDA™ is a registered trademark of Honda Motor Co., Ltd.
This pump is designed for pumping water only.
Ideal for general purpose use in high volume liquid transfer and contractor dewatering applications
redlionproducts.com | Hotline: 1.888.885.92546
• Durable cast iron, semi-open style impeller
• Lightweight aluminum outer casing; includes heavy-duty roll frame
• Built-in check valve
• Kit includes 12' reinforced suction hose with stainless steel strainer, 50' lay-flat discharge hose and attached couplings, as well as two 2" aluminum adapters for use with quick connect couplers
• EPA certified
• Self-priming* to 25' of suction lift
Aluminum Water Transfer Pump Kit5RLAG-2L 5RLAG-2LKIT
Model ItemMax Flow
Max Head
Suction Lift
Suction/Discharge Size
Fuel Tank
Engine
5RLAG-2LKIT(pump and
hose kit)617030 150 gpm 92' 25' 2" x 2" MNPT 3.8 qt
Air Cooled, 4 Stroke OHV
(179cc)
5RLAG-2L(pump only)
617033 150 gpm 92' 25' 2" x 2" MNPT 3.8 qtAir Cooled,
4 Stroke OHV (179cc)
Ideal for general purpose use in high volume liquid transfer and contractor dewatering applications.
This pump is designed for pumping water only.
7
GAS ENGINE DRIVE
• Durable cast iron, semi-open style impeller
• Lightweight aluminum outer casing includes heavy-duty roll frame
• Wear-resistant silicon carbide mechanical seal
• Self-priming* to 25' of suction lift
• Built-in check valve
• EPA certified
• The 6RLAG-3HST is powered by the HONDA™ GX160
Aluminum Semi Trash Pumps
Model ItemMax Flow
Max Head
Suction Lift
Suction/Discharge Size
Fuel Tank
Engine
6RLAG-2LST 617034 150 gpm 92' 25' 2" x 2" MNPT 3.8 qtAir Cooled,
4 Stroke OHV (208cc)
6RLAG-3LST 617037 264 gpm 85' 25' 3" x 3" MNPT 3.8 qtAir Cooled,
4 Stroke OHV (208cc)
6RLAG-3HST 617041 264 gpm 85' 25' 3" x 3" MNPT 3.8 qt
Commercial grade Honda
GX160, Air Cooled, 4 Stroke
OHV (163 cc)
6RLAG-3LST 6RLAG-3HST6RLAG-2LST
6RLAG-2LST 6RLAG-3LST
6RLAG-3HSTPowered by HONDA™ is a registered trademark of Honda Motor Co., Ltd.
Ideal for high volume water transfer and dewatering. Can handle liquid slurries including sand, pebbles, and suspended solids less than 1/2" in diameter.
This pump is designed for pumping water only.
redlionproducts.com | Hotline: 1.888.885.92548
• Powered by 208cc hp 4 stroke air cooled OHV engine
• Removable aluminum outer casing with cast iron inner volute and impeller for durability
• Silicon carbide seal for abrasion resistance and trash application
• Handles up to 1-1/4" solids
• Includes heavy-duty roll frame
• EPA certified
• Self-priming* to 25' of suction lift
Model ItemMax Flow
Max Head
Suction Lift
Suction/Discharge Size
Fuel Tank
Engine
6RLAG-3LTT 617038 285 gpm 75' 25' 3" x 3" MNPT 3.8 qtAir Cooled,
4 Stroke OHV (208cc)
Aluminum Trash Pump6RLAG-3LTTIdeal for high volume water transfer and construction-grade dewatering applications. Can handle liquid slurries containing sand, small rocks, and other debris less than 1-1/4" in diameter.
This pump is designed for pumping water only.
9
GAS ENGINE DRIVE
• Heavy-duty cast iron pump casing
• Durable cast iron semi-open type impeller
• Stainless steel shaft sleeve and EPDM elastomer seal
• 2" FNPT suction and discharge for convenient hookup
• Self-priming* to 25' of suction lift
• Handles most liquid agricultural chemicals
• Handles up to 5/8" solid debris
• Powered by Kohler engine
• EPA certified
Engine Driven Cast Iron Transfer Pump5RLGF-8KRF
Model ItemMax Flow
Max Head
Suction Lift
Suction/Discharge Size
Fuel Tank
Engine
5RLGF-8KRF 617032 170 gpm 95' 25' 2" x 2" FNPT 3.8 qtKohler, air cooled,
4 stroke, OHV (196cc)
Powered by KOHLER® is a registered trademark of KOHLER Co.
Not to be used for applying driveway sealant.
Powered by
Ideal for liquid transfer including most agricultural chemicals and general dewatering where rugged portability is important.
redlionproducts.com | Hotline: 1.888.885.925410
• Lightweight, corrosion-resistant construction
• Self-priming* to 25' of suction lift
• Integrated check valve and carry handle
• Rubber feet to dampen vibration
• EPA certified
• Carbon ceramic with EPDM elastomer seal
6RLPG-2K
• Powered by Kohler 6.5 hp engine
• Lightweight, corrosion-resistant construction
• Self-priming* to 25' of suction lift
• Integrated check valve
• Rubber feet to dampen vibration
• EPA certified
• Carbon ceramic mechanical seal with EPDM elastomers
• Includes heavy-duty roll frame
Model ItemMax Flow
Max Head
Suction Lift
Suction/Discharge Size
Fuel Tank
Engine
6RLPG-2U 617070 195 gpm 135' 25' 2" x 2" FNPT 3.8 qtAir Cooled, 4 Stroke
OHV (212cc)
Model ItemMax Flow
Max Height
Suction Lift
Suction/Discharge Size
Fuel Tank
Engine
6RLPG-2K 617071 195 gpm 142' 25' 2" x 2" FNPT 3.8 qtKohler, Air Cooled, 4 Stroke OHV (196cc)
Thermoplastic Chemical Transfer Pumps6RLPG-2U
Powered by KOHLER® is a registered trade of KOHLER Co.
Powered by
Ideal for sprayer applications such as liquid fertilizers and ag chemicals
Ideal for sprayer applications such as liquid fertilizers and ag chemicals
Not to be used for applying driveway sealant.
11
GAS ENGINE DRIVE
• Includes:
• 12' reinforced suction hose
• 50' lay-flat discharge hose with attached couplings
• Two 2" aluminum adapters (for use with quick connect couplers)
• Stainless steel strainer
2" HOSE KIT
• 3" steel strainer
• Aluminum adapter for cast iron pump applications
• Spanner wrench
3" HOSE KIT
Model Item Suction Hose Discharge Hose
2HKP 617212 2" I.D. x 12' PVC 50' Lay-Flat
3HKM 617201 3” I.D. x 20’ PVC 50’ Lay-Flat
3HKM
2HKP
Our hose kits are designed to work with engine driven water pumps and include all of the attachments required to complete your applications. Temperature range is 15 °F to 150 °F.
20' PVC suction hose and 50' discharge hose assemblies in 3" ID for attachment to a poly or cast iron pump. Includes:
redlionproducts.com | Hotline: 1.888.885.925412
Item Where Used Description
617300
2RLAG-1L
Minor repair kit contains mechanical seal, casing, O-rings, volute square-ring
617310Major repair kit contains all internal components (impeller, volute, seal,
casing, O-ring, volute square-ring, shaft key)
617320 Casing kit contains casing and hardware
617340Suction and discharge flange kit contains suction flange, discharge
flange, gaskets for both, plugs, bushings, and hardware
617350 Handle/base assembly contains handle, base, rubber feet, and hardware
617100
4RLAG-2H
Overhaul kit contains mechanical seal, impeller, O-ring, and hardware
617101Discharge kit contains cap plug, square gasket, discharge flange,
O-ring, and hardware
617102Suction/drain kit contains cap plug, check valve, suction flange,
O-ring, and hardware
617103Pump end kit contains adapter, O-rings, mechanical seal, impeller,
housing volute, U-type packing, cap plugs, discharge flange, square gasket, pump housing, check valve, suction flange, and hardware
617114 Roll frame kit contains roll frame, rubber feet, and hardware
617125 Mechanical seal kit contains carbon/ceramic mechanical seal and hardware
617321
5RLAG-2LKIT
Casing kit contains casing and hardware
617341Suction and discharge flange kit contains suction flange, discharge
flange, gaskets for both, plugs, and hardware
617351 Roll frame assembly contains roll frame, rubber feet, and hardware
617322
6RLAG-2LST
Casing kit contains casing and hardware
617342Suction and discharge flange kit contains suction flange, discharge
flange, gaskets for both, plugs, and hardware
617352 Roll frame assembly contains roll frame, rubber feet, and hardware
6173015RLAG-2LKIT6RLAG-2LST
Minor repair kit contains mechanical seal, casing, O-rings, volute square-ring
617311Major repair kit contains all internal components (impeller, volute, seal,
casing, O-ring, volute square-ring, shaft key)
REPAIR KITS
13
GAS ENGINE DRIVE
Item Where Used Description
617302
6RLAG-3LST6RLAG-3HST
Minor repair kit contains mechanical seal, casing, O-rings, volute square-ring
617312Major repair kit contains all internal components (impeller, volute, seal,
casing, O-ring, volute square-ring, shaft key)
617323 Casing kit contains casing and hardware
617343Suction and discharge flange kit contains suction flange, discharge
flange, gaskets for both, plugs, and hardware
617353 Roll frame assembly contains roll frame, rubber feet, and hardware
617303
6RLAG-3LTT
Minor repair kit contains mechanical seal, casing O-rings, volute square-ring
617313Major repair kit contains all internal components (impeller, volute, seal,
casing, O-ring, volute square-ring, shaft key)
617324 Casing kit contains casing and hardware
617344Suction and discharge flange kit contains suction flange, discharge
flange, gaskets for both, plugs, bushings, and hardware
617354 Roll frame assembly contains roll frame, rubber feet, and hardware
6173576RLAG-3LST6RLAG-3HST6RLAG-3LTT
Two 3" to 2" reducers
617330
2RLAG-1L5RLAG-2LKIT6RLAG-2LST6RLAG-3LST6RLAG-3HST6RLAG-3LTT
Accessory kit contains priming plug, drain plug with O-ring seals attached
617304
5RLGF-8KRF
Minor repair kit contains mechanical seal, casing, O-rings, volute square-ring
617314Major repair kit contains all internal components (impeller, volute, seal,
casing, O-ring, volute square-ring, shaft key)
617325 Casing kit contains casing and hardware
617355 Roll frame assembly contains roll frame, rubber feet, and hardware
640197RLCGF-5
Gasket, shaft sleeve, mech. seal - fluoroelastomer/stainless steel
617198 Cast iron impeller
REPAIR KITS
redlionproducts.com | Hotline: 1.888.885.925414
NOTES:
15
GAS ENGINE DRIVE
NOTES:
Form #996371 | Rev. 003 | 02/19
redlionproducts.com1.888.885.9254
Recommended