View
31
Download
0
Category
Preview:
Citation preview
Turbine typeTurbine type [Standard]
GAS METERS
TERMS OF REFERENCE:
Sizemm [in]
Part No. Flow range[m³/h]
Pressure drop[maximum]
[kPa]
Pulse value[per pulse]
25 [1]DGMT25PO G16DGMT25PO G25DGMT25PO G40
2.5 - 254 - 406 - 65
0.61.12.4
100ltr
1000ltr
50 [2]DGMT50PO G40DGMT50PO G65
DGMT50PO G100
5 - 6.58 - 100
10 - 160
0.60.92.0
80 [3]DGMT80PO G100DGMT80PO G160DGMT80PO G250
8 - 16013 - 25020 - 400
0.71.22.2
100 [4]DGMT100PO G160DGMT100PO G250DGMT100PO G400
13 - 25020 - 40032 - 650
0.81.32.5
150 [6]DGMT150PO G400DGMT150PO G650
DGMT150PO G1000
32 - 65050 - 100080 - 1600
0.71.02.3
200 [8]DGMT200PO G650
DGMT200PO G1000DGMT200PO G1600
50 - 100080 - 1600
130 - 2500
0.70.91.7
250 [10]DGMT250PO G1000DGMT250PO G1600DGMT250PO G2500
80 - 1600130 - 2500200 - 4000
0.61.02.0
300 [12]DGMT300PO G1600DGMT300PO G2500DGMT300PO G4000
130 - 2500200 - 4000320 - 6500
0.71.02.0
TECHNICAL DATA
• Complies with ISO9951• Low pressure drop• -30°C to +55°C working range• Flanged to Pn16 standard• Digital display• Display head can be rotated 360°• Pulsed output as standard• IP Rating: 65
Size mm [in] - Refers to inside bore diameter. Flow RangePressure drop [maximum] - Greatest potential system lossPulse value - Measurement volume to BMS [Building Management System]Accuracy class - To ISO9951
Unit 7, Bruff Industrial Estate, Longley Green, Worcestershire WR8 9AH - UKTel: (+44) 0845 862 5553 | Fax: 0845 862 5554 | Email: info@deltaflowtech.com | W: deltaflowtech.com
GAS METERSTurbine type [Standard] continued
1 10 100 1000 10000Q [m³/h]
Pressure loss table: dry air and standard conditions
Pn [K
pa]
0.01
0.1
1
10
200
150
100
8050
25
1 Kpa = 10Mbar
Part No. Size A B C D E F G Weight
DGMT25PO G16DGMT25PO G25DGMT25PO G40
25 200 287 115 85 4 14 65 9
DGMT50PO G40DGMT50PO G65DGMT50PO G100
50 200 313 165 125 4 18 99 9
DGMT80PO G100DGMT80PO G160DGMT80PO G250
80 240 343 200 160 8 18 132 11
DGMT100PO G160DGMT100PO G250DGMT100PO G400
100 300361369369
220235235
180190190
8182222
156 15
DGMT150PO G400DGMT150PO G650DGMT150PO G1000
150 450426434434
285300300
240250250
8222626
211 27.5
DGMT200PO G650DGMT200PO G1000DGMT200PO G1600
200 600470480488
340360375
295310320
12222630
266274284
46
DGMT250PO G1000DGMT250PO G1600DGMT250PO G2500
250 750541551563
405425450
355370385
12263033
319330345
170
DGMT300PO G1600DGMT300PO G2500DGMT300PO G4000
300 750706719734
460485515
410430450
121616
263033
370389409
200
C
A
D G
123
107
B
E and F
Measurements in mm
Dimension references:
A = Length
B = Height
C = Flange height
E = Number of bolt holes
F = Bolt hole size
All sizes are approximate and are given for guidance only.
Rel: 03/12
Unit 7, Bruff Industrial Estate, Longley Green, Worcestershire WR8 9AH - UKTel: (+44) 0845 862 5553 | Fax: 0845 862 5554 | Email: info@deltaflowtech.com | W: deltaflowtech.com
Recommended