View
228
Download
0
Category
Preview:
Citation preview
GroupProductOverview
Tyco Flow Control
A global network, bringing together the
manufacturer, marketing and sales of the most
comprehensive range of industrial flow control
products in the world.
The organisation markets technically
advanced valve, actuator, instrumentation and
control systems from group-owned
manufacturing operations across the world,
including internationally renowned brand names.
Companies
Industrial Valves
Contents
Ball Valves p4/5
Butterfly Valves p6
Gate & Globe Valves p7
Other Industrial Valves p8
Pneumatic Actuation p9
Pneumatic Accessories p10
Electric Actuators p11
Fieldbus Interfaces p12
Safety Valves p13-15
Environmental p16/17
Instrument Valves & Enclosures p18
Power Industry Isolation Valves(Gate) p19
Power Industry Isolation Valves(Globe & Check) p20
Boiler Trim & Control Valves p21-23
Lined Valves & Sampling Systems p24
Special Service Valves p25
Process Valves & Pumps p26
Aftermarket Services p27
Controls & Instrumentation
Safety Relief Valves
Steam & Power Products
Special Service Valves
Aftermarket
Hygienic Services
� Anderson Greenwood Crosby� Anderson Greenwood
Instrumentation Products� Avid� Biffi� Clarkson� Descote� Dewrance� Fasani� FCT� FloCheck
Instrument Valves & Enclosures
� Hancock� Hindle� Hovap� Intervalve� Keystone� Klein� KTM� Kunkle� L&M Valve� Luceat� Lunkenheimer
� Morin� Narvik� Neotecha� Penberthy� Prince� Raimondi� Richards� RMI� Rovalve� Sapag� Sempell
� Triangle� Tyco� Vanessa� Varec� Vonk� Whessoe� Winn� Yarway
Industrial Valves
p4
Materials Body: Carbon steel,Stainless steel
Ball and Stem: Stainless steelSeat: Virgin PTFE,
reinforced PTFE
Utility BallValves
� Reduced and full boremodels
� ISO 5211 top mountingplate available onselected models
� Three-way, multiportdesigns available
� Seat material optionsavailable
� Fire safe modelsavailable
� TA-Luft approved� Jacketed valves� Cryogenic valves� Tank bottom valves� Metal and carbon seated
A comprehensive range ofone, two and three pieceball valves to suit a widerange of general industrialapplications
Pressure Class:ASME 150/300: PN 10 to PN 100
Sizes: DN 8-300 (1/4”-12”)
End Connections:Screwed - BSPP, BSPT, NPT, Flanged - ASME 150/300,
PN 10/16, PN 25/40
Tyco
Process,Floating Ball
Valves
� Full and reduced bore � High integrity stem seal� Blow-out proof and
antistatic stem design� Fugitive emission
detection system available� Fire test certified models
available� ISO 5211 mounting flange
for easy adaptation toautomated operation,pneumatic or electricactuators
� Suitable for adaptation for high temperature and cryogenic service
� TA-Luft approved
For use in a wide spectrumof chemical, hydrocarbonand other process industryapplications.
Body: Carbon andstainless steels,aluminiumbronze, duplexsteels andother alloys
Ball and Stem: Stainless steeland otheralloys
Seat: Virgin PTFE,glass filledPTFE, PEEK,etc.
Other materials on request
Hindle, KTM,Richards, Tyco
Pressure Class:ASME 150/300/600/900/1500/2500
PN 16 to PN 100
Sizes: DN 8-400 (1/4”-16”)
Temperature range:-196°C to +500°C
at the forefront of floating ball valve design and manufacturing technology‘‘
’’
Technical Data
Features
Three-Way2 & 4 Seats(L & T port)
Used in mixing or dividingfluid, minimizing space &reduces piping stress
Carbon steel, stainless steel,duplex alloy 20, monel,hastelloy B & C & others
� Positive flow stemindicator
� Fire safe design� Locking device� Meets NACE MR-01-75� Positive shut-off� Integral mounting flange� Blow out proof stem� Low torque operation� Available for high temp
application
KTM
PTFE, RTFE, PEEK & graphite
ANSI Class 150 to 300ANSI Class 600 (FB)DN 15 to DN350 (FB)DN 150 to DN350 (RB)-29°C to 500°CFlangedKTM standard
Soft seat - Class VIGratite seat - Class V
Control (Single-V &
Dual-V)
KTM
� Split body (Single-V) & Unibody (Dual-V)
� Trunnion mounted� Uni-directional� Side entry� Wide rangeability� High Cv� RTFE or stellited
bearings� Adjustable packing� Cavity free� Accuracy of control
KTM’s Single-V and Dual Vdesign provides shearingaction between the v-notchball and seat for a smooth,non-clogging operation
Carbon steel, stainless steel,duplex, alloy 20, Hastelloy B &C, monel, nickel, titanium &others
Laminated metal seat, stellitedthick (solid) metal seat
ANSI Class 150 to 600DN 25 to DN300 (FB)DN 25 to DN500 (RB)-29ºC to 500ºCFlanged & FlangelessANSI B16.10 short pattern &ISA75.04Laminated - Class IVSolid - Class IIMetal - Class V
Industrial Valves
p5
a complete range of trunnionmounted ball valve designs‘‘ ’’
� Full or reduced bore � Fire safe approved
design� To API 6D � Design to ASME
B16.34/B 31.3/ASME VIIIDiv 1&2
� Extensions available formechanical driving, ventand drains
� Soft, metal/soft ormetal/metal seating
� Manual or poweredoperation
� Double Block and Bleed
The one piece fully weldedbody construction offers theminimum risk of outsidepressure leakage. This designis recommended for gastransportation and storage.
� One piece bodyconstruction
� Internal access withoutdismantling flanges
� Bolted or pressure sealedbonnet
� Fire safe approved design� End connections:
flanged, butt weld, clampedor transition/pup pieces
� To API 6D or API 6A� Design to ASME B 16.34� Soft, metal/soft or
metal/metal seating� Manual or powered
operation� Double Block and Bleed
Ideal construction for highpressure and hightemperatures. Mainlyinstalled on offshoreapplications (topsides,sub-sea valves)
Materials
Technical Data
Features
Conforms to NACE requirementsMR0175 latest edition. Widerange of materials available, incast or forged version, includingbut not limited to:
Metal Seated
Specifications determined inresponse to individual servicerequirements
Metal seated ball valves,for high temperature,abrasive or erosiveservices across a widespectrum of applications.
Pressure Class:ASME 150/300/600/900/1500/2500
Sizes: DN 15-600 (1/2” - 24”)
Temperature range:up to 500°C
� Reliable shut-off� Low torque operation� High integrity stem seal� Inherently fire safe� Various coatings available
• Chromium carbide• Tungsten carbide• Nickel alloy
Seat area weld overlays orcoatings available
- Carbon steel- Super duplex (25% Cr)- Low alloy steels- Stainless steel- Inconel 625 and 718- Duplex (22% Cr)- 6 Mo- Titanium
Top Entry
FCT
Pressure Class:ASME 150/300/600/900/1500/2500 API 3000/5000/10000/15000
Sizes: DN 50-1400 (2” - 56”)
Temperature range:-196°C to +350°C
Fully Welded
Conforms to NACErequirements MR0175 latesteditionWide range of materialsavailable, in cast or forgedversion, includingbut not limited to:
- Carbon steel- Low alloy steels- Stainless steel
Seat area weld overlays orcoatings available
Raimondi
Pressure Class:ASME 150/300/600/900/1500
Sizes: DN 50-1500 (2” - 60”)
Temperature range:-196°C to +350°C
FCT, Hindle,KTM
End Entry, SplitBody Trunnion
mounted
� Full or reduced bore� Fire safe approved
design� End connections:
flanged, butt weld orclamped
� To API 6D or API 6A� Design to ASME B16.34� Variations include
diverting multi-portdesigns, pig valves, etc
� Soft, metal/soft ormetal/metal seating
� Manual or poweredoperation
� Double Block and Bleed
2 piece (cast) and3 piece (forged), end entrydesigns for tight shut-off ongas and liquid services
Conforms to NACE requirementsMR0175 latest edition. Widerange of materials available, incast or forged version, includingbut not limited to:
FCT, Hindle,KTM
Pressure Class:ASME 150/300/600/900/1500/2500 API 3000/5000/10000
Sizes: DN 50-1500 (2”-60”) 3-piece
Temperature range:-196°C to +350°C
- Carbon steel- Super duplex (25% Cr)- Low alloy steels- Stainless steel- Inconel 625 and 718- Duplex (22% Cr)- 6 Mo- Titanium
Industrial Valves
p6
Monoflange or lugged, resilientseated butterfly valves,conforming to ISO standards
� Bubble tight shut-off� One piece, wafer thin disc/stem� Extended body neck, according
to HeizAnlV, allows for pipeinsulation
� The seat and disc are the onlyparts in contact with themedium
� Face to face dimensionsaccording to EN-558-1 series 20(ISO 5752 series 20)
� Integral dew point barrier� Lockable, shaped hand lever� Actuator flange to ISO 5211� Bi-directional, fully rated for end
of line service
Resilient Seated(Utility Valves)
Resilient SeatedButterfly
High PerformanceButterfly
� Actuator flange according ISO 5211
� High solid, glossy, siliconefree, paint system
� Extended body neck allowspipe insulation
� Face to face dimensionsaccording to EN-558-1 (ISO 5752)
� Polished disc edges forlonger seat life and bubble-tight shut-off
� Top bushing absorbs actuatorside thrust loads
� Dirt scraper prevents moisturepenetrating into the shaft area
� TA-Luft approved
� Actuator flange according ISO 5211
� Integrated travel stop� Accessible packing adjustment
without operator removal� Bi-directional shut-off
performance� End-of-line service� Soft seat, fire-safe and metal
seat� Compact design, low weight� Double eccentric operating
principle� Shaft bearings to ensure
stability during high pressure,high cycle applications
� TA-Luft approved
Pressure class:Full vacuum to PN 25
Sizes: DN 40-2400 (1 1/2”-96”)
Temperature range:-40°C +160°C
Flange accommodation:PN 6/10/16/25, ASME 150, JIS 10/16K
Wafer, lugged and double flangedversions are available for bothgeneral and heavy duty industrialapplications
Wafer, lugged and double flanged,double eccentric butterfly valves incompliance with ISO or ASMEstandards
Pressure class:Full vacuum to PN 40, ASME 150/300/600
Sizes: DN 50-700 (2”-28”)
Temperature range:-50°C to + 520°C
Flange accommodation:PN 10/16/25/40, ASME 150/300/600
Body: Cast and ductile iron, carbon steel
Disc: Ductile iron, stainless steel, nickel aluminum bronze
Seat: NBR, white NBR, EPDM, XPEPDM, Fluorel, PTFE/EPDM
Other materials available on request
Body: Carbon steel, stainless steel
Disc: Carbon steel, stainless steel
Seat: RTFE, stainless steel, fire safe
Other materials available on request
Body: Ductile Iron
Disc: Stainless steel, NiAlBz.
Liner: NBR, EPDM
Pressure class:Full vacuum to PN 16
Sizes: DN 20-300 (3/4”-12”)
Temperature range:-40°C to +120°C
Flange accommodations:PN 6/10/16: ASME 150
a complete range of butterfly valves for generalindustrial and process applications‘‘
’’
Keystone, WinnKeystone Keystone, Winn
Features
Materials
Technical Data
Industrial Valves
p7
Features
Technical Data
Materials
Bellows SealedGlobe Valves
Body and bonnet:Carbon steel,Cast iron or Stainless steel
Low temperature carbon steel onrequest
Pressure Class:ASME 150/300/600/800PN 10/16/25/40/50/100
Sizes: DN 15-350 (1/2”-14”)
Temperature range:-60°C to +420°C
� Suitable for thermal oilapplications
� Proven technologies for tightsealing on high temperatureservices (metal or soft seating)
� Steam tracing� Stem tightness in accordance
with TA-LUFT (3.1.8.4)� Manual, actuated and control
valves
Descote, Klein
For non critical hazardousservices such as thermal oil,steam, vacuum and chemicals
Globe Valves
� Designed to ASME B16.34 and BS1873
� Bolted bonnet and pressureseal designs
� Bellows sealed designs� Hazardous service models
available, including Chlorine,HF Alkylation, LAB, etc.
� Tested according to API 598� Material compliance to NACE
available
Pressure Class:ASME 150 to 4500
Sizes: DN15-600 (1/2”-24”)and larger
Temperature range:-196°C to +650°C
End connections:Flanged RF and RTJ,butt weld, hub ends
Body: Carbon, alloy and stainlesssteels. Monel, Hastelloy,Incoloy, Inconel, duplex, 6Mo, etc.
Alternative materials on request
Descote, Fasani,Klein, Raimondi,Sempell
Ideal for throttling and shut-offservice in oil, gas andpetrochemical applications
Gate Valves
� Designed to ASME B16.34, API 600 and BS1414
� Bolted bonnet and pressureseal designs
� Bellows sealed designs� Hazardous service models
available, including Chlorine,HF Alkylation, LAB, etc.
� Tested according to API 598� Material compliance to
NACE available
Body: Carbon, alloy and stainlesssteels. Monel, Hastelloy,Incoloy, Inconel, duplex, 6Mo,etc.
Alternative materials on request
Fasani, Hancock,Raimondi, RMI
Suitable for oil, gas andpetrochemical plants, forthrottling and shut-off services
Pressure Class:ASME 150 to 4500
Sizes: DN15-1800 (1/2”-72”)and larger
Temperature range:-196°C to +650°C
End connections:Flanged RF and RTJ, butt weld, hub ends
a complete range ofgate, globe & check valves for general industrial
and process applications‘‘
’’
Rotary Process
Bi-directional, zero leakage shut-off, suitable for extremes ofpressure and temperature
� Torque-generated resilientmetal seal provides zeroleakage performance(API 598 resilient seated)
� Quarter turn, triple offsetgeometry achieves non-rubbing design
� Hardfaced, integral metalseating
� All-metal construction givesinherent fire safety
� Blow-out proof stem, retainedboth externally and internally
� Suitable for cryogenic and hightemperature services
� Design Codes: ASME B16.47, BS 3243
Body and disc: Carbon, stainless and duplex steels,aluminium bronze
Seat: All-metallic construction
Other materials on request
Pressure class:ASME 150 to 1500PN 10 to 160
Sizes: DN 80-2100 (3”-84”)
Temperature range:-254°C to +815°C
Vanessa
Check Valves
� Single, dual plated ortorpedo shaped disc design
� Swing, lift or tilting discprinciple
� Spring, weight or hydraulicassisted disc action
� Non-slam action� Compatible with DIN, ASME,
BS, PN and JIS standards� Low cost of maintenance� Suitable for installation in
vertical pipelines� Material compliance to
NACE available� Rubber lined versions for all
water related and industrialapplications
Body: Cast and ductile iron, carbonsteel, stainless steel, nickel aluminum, bronze
Disc: Carbon steel, stainless steel,nickel aluminum bronze
Seat: NBR, EPDM, FPM, StelliteAlternative materials on request
Pressure range:up to ASME 10,000
Sizes: DN40-1600 (1 1/2”-64”)Temperature rating:
-196°C to +650°CEnd connections:
Flanged RF and RTJ,butt weld, hub ends,wafer, lugged
Dewrance, Fasani,FloCheck, Keystone,Prince, Raimondi,Sapag, Sempell
Wafer, lugged and doubleflanged check valves for allutility, industrial and processapplications
Knife Gate Valves
� Two-part body with metallic gateguides
� Can be installed as inlet/outletvalve or between flanges
� Tight shut-off in both directions� Self-adjusting transverse sealing
to atmosphere� Flush-out corners ensure
flushing of the seal zone� Segmental gate radius avoids a
possible jam effect� Cutting edge in lower body� Handwheel, electric, pneumatic
or hydraulic available� Face-to-face according
EN 558-1 (DIN 3202 part 1)
Clarkson, Keystone, L&M Valve, Rovalve
Knife Gate Valves for service inpolluted media such as sewagewater, soft solids, coal dust,emulsions, granulates, powders,pastes, etc.
Pressure class:From vacuum up to 16 bar
Sizes: DN 50-1400 (2”-56”)
Temperature rangeup to 400°C
Flange accommodation:PN 10/16/25, ANSI
Body: Cast iron, Ductile iron,Stainless steel, Hastelloy
Gate: Stainless steel, Hastelloy,Special material
Sealing: NBR, EPDM, FPM, PTFE,Ceramic fiber
specialised valves for applications where pressureand temperature extremes are encountered’’
‘‘
Features
Technical Data
Materials
Industrial Valves
p8
Controls & Instrumentation
p9
Features
Technical Data
Materials
� Double acting or spring return� Carbon steel construction for
maximum strength� Totally enclosed,
weatherproof housing� Ideal for larger valves with high
break-out torques and valveswith high working pressures
� Fully encapsulated, weldedspring cartridge for maximumsafety and ease of assembly
� External travel stops for precisestroke adjustment
� Special coatings available foroffshore or corrosiveenvironments
� ‘Gas over Oil’ and hydraulicversions
� Double acting or spring return� Ductile iron housing, pistons
and end caps for cost effective,durable life
� Stainless steel cylinders forunrivaled corrosion protection
� Easy disarming of spring forsafe maintenance
� ISO 5211 mounting pattern� Bi-directional travel stops
Optional features• Jackscrew override• Partial stroke test device• Integral lock out device
� Compact rack and piniondesign
� Double acting� Spring return (single acting)� Top and bottom bearings� Anti friction piston pads� Hard anodised and ESPC
finish� Alternative nickel plated finish� Field reversible� ISO, DIN, Namur and
Keystone mounting standards
Rack and pinion pneumaticactuators, developing a constantoutput torque, ideal for thesmooth operation of quarter turnvalves, etc.
Heavy duty scotch yoke,pneumatic actuators suitablefor 90°, on-off or modulatingservice
Body: Hard anodisedaluminium
Pistons: Aluminium
O-ring Seals: NBR
Bearing pads: Polyamide
1/4 Turn PneumaticActuators
PneumaticActuators
PneumaticActuators
Keystone, Tyco Morin Biffi
Scotch yoke, pneumaticactuators for efficient, on-off ormodulating control of quarter turnvalves
a complete range of pneumatic actuators for smooth operation of quarter turn valves‘‘ ’’
Torque outputs at 5.5 barg
Double acting models: up to 2054Nm
Spring return models: up to 1414Nm
Max supply pressure: 10 barg
Temperature range: -30°C to +90°C
Torque outputs:Double acting models:up to 226.400 Nm (5 barg)
Spring return models:up to 78.900 Nm (spring end torque)
Supply pressure: 10.5 barg max
Temperature range: -30°C to +100°C
Other ranges on request
Body: Ductile iron,stainless steel
Cylinders: Carbon steel Xylan coated, stainless steel
Shaft: High strength alloy steel
Bushings: Sintered bronze
Guide bands: PTFE
Body: Carbon steel
Cylinders: ENP and polished
Piston rods and Guide bars: Hard chrome plated
and polished
Bushings: Bronze or sinteredbronze, charged with PTFE
Torque outputsDouble acting models:up to 26.890 Nm (5.5 barg)
Spring return models:up to 16.473 Nm (spring end torque)
Supply pressure: 2.8 to 11 barg
Temperature range: -30°C to +100°C
Option: -45°C to +150°C
Angular rotation: 90° ± 8°
Features
Technical Data
Materials
Controls & Instrumentation
p10
Position MonitoringDevices
Solenoid Valves Positioners
� Model ER – economical IP66enclosure with solenoid valveintegration as standard
� Model XA – rugged enclosure,suitable for hazardous areaapplications
� Model ZR – corrosion resistantIP66 enclosure, for generalpurpose and intrinsically safeapplications
� Model ZR Plus – for integratedmonitoring and control ofautomated valves in a singlehousing
� K-Block – compact IP67 dualproximity device incorporatingLED’s as standard
� Low profile switchbox –simplified setting of switches orsensors in an aluminiumenclosure
� Compact design, constructedon the diaphragm operatedpoppet valve principle
� Positive sealing and high airflow characteristics
� 5/2 or 3/2 selectable viaadapter plate
� 3/2 operation provide springchamber purge function
� Meets internationally acceptedNamur standards for use inaggressive environments
� Available versions include: • Weatherproof to IP65• Explosion-proof type
‘ed’, ‘m’ • Intrinsically safe
� Analogue• Auto calibration via push
buttons or infrared• Corrosion resistant
enclosure• HiVue local display• Switches or sensors
� Programmable• For advanced control of
rotary and linear actuators• Auto calibration via keypad
or HART• Diagnostic information
available• Programmable
characteristics• Remote mount option
See individual product datasheets fordetails of construction and materials
See individual product datasheetsfor details of construction andmaterials
Working pressure:2.8 to 8 bar
Signal: 0.2 to 1.0 bar 4-20mA
Temperature range:-40°C to +75°C
Options available for allclassifications of Hazardous Areas
Conforms to VDI/VDE 3845 Standard
AVIDAVIDTyco
A complete range of Tyco AVID®, 1/4 turn valve position monitoringdevices
The Tyco AVID® range ofpneumatic and electro-pneumaticpositioners for proportionaloperation and advanced digitalcontrol of actuated valves
High flow, pilot operated solenoidvalves for direct mounting topneumatic actuators
Air pressure range:2-8 bar g
Voltage: 24-230V
Temperature range:-25°C to +55°C
Port size: ISO 228 - G1/4
See individual product datasheets fordetails of construction and materials
‘‘ complete range of diverse accessories for today’s demanding market requirements’’
Controls & Instrumentation
p11
Features
Technical Data
Materials
Compact ElectricActuators
Keystone Biffi Keystone
� Easy set-up and commissioning� Initial tuning without unscrewing
a single bolt or nut� Reduced set-up time� Double displays� Position indication in case of
power failure� Local push buttons for full
actuator access� Password protection to avoid
unauthorized access� Diagnostics are displayed in one
of the available languages forboth alarms and warnings
� IrDA interface as standard.Bluetooth optional
� Reduced number of parts ensurehigher reliability and lowermaintenance cost
� Multi-functional module withfeatures as follows:•Analog position input: 4-20mA
(0-10VDC)•Analog position output: 4-20mA•4 additional SPST output
contacts•Motor relay•Blinker for motor running
� Local interface device withlocal/remote selector, OP/CL pushbuttons and 2 LED for localindication
� Optional modules for 3-phasevoltage supply
� Backup alkaline battery orexternal 24VDC to update remoteindications during power supplyfailure
� Fieldbus communication modulesfor different bus protocols:• Profibus DP• Foundation Fieldbus• DeviceNet• LonWorks• ASi 2.1
� Bluetooth module
� Compact, epicyclic design ofrobust construction (IP68)suitable for corrosiveenvironments
� Interchangeable base plates forsimple connection to all valvetypes
� Adjustable (+/- 10°) travel stopsin both directions
� Manual override is independentof the motor drive
� An innovative motor operatingwith the whole range ofvoltages; duty rated at 100%
� Incorporates a local valveposition indicator
� Multi voltage supply for DC or1-ph AC (3-ph optional)
� Variable speed controlindependently adjustable inboth directions
� Accurate and adjustable torquecontrol from 40% to 100% ofnominal torque
� Optional modules for variousfeatures
Torque: up to 2.000 Nm
Voltage supply ranges:24V up to 240V DC or single phase (3 phase optional)
Control voltages range:24V up to 120V DC or single phase
Temperature range: -25°C to +70°C
Speed range: adjustable
Anodized aluminum enclosures with epoxy -vinyl paint protection RAL 9007 (grey)
See individual product technicaldatasheets
Torque: up to 340.000 Nm
Voltages: 110 - 690V
Temperature ranges:-55°C to +85°C
Speed range: 6 to 180 secs
See individual product datasheets
IntelligentProgrammable
Actuators
Accessories
For the operation of 1/4 turnvalves or dampers
A complete range of accessories toensure maximum performancefrom the whole range of compactelectric actuators with integratedelectronic controls
The new generation ofintelligent electric actuators willset a further step into theintegration in automatedprocess plants
one of the world’s largest ranges of high performance electric actuators‘‘ ’’
Anodized aluminium gear case andenclosureElectro static powder coating
Controls & Instrumentation
p12
AS-Interface DeviceNet ProfiBus Fieldbus Foundation
Reduced wiringReduced installation
Diagnostics control Diagnostics and control,including hazardous areas
Diagnostics and control,including hazardous areas
and redundancy
Cable
Distance
Addresses
Speed
Topology
Inputs
Outputs
Diagnostics
Redundancy
On/Off
Control
Electric actuator
Pneumatic actuator
Hazardous
Communication
2 Core
100m [1]
62 [2]
167 Kbs
Line, tree, star, trunk/drop
4
2
Yes [3]
No
Yes
Yes [3]
Yes
Yes
EEx d [4]
Gateway
Will communicate with higher level fieldbus via a gatewayie. ProfiBus, DeviceNet, InterBus
2 Twisted pairs
1200m [1]
126
9.6//19.2/93.75/187.5 Kbs
Trunk/drop (max 0.3 m), daisy chain
6
2
Yes
No
Yes
Yes
Yes
Yes
EEx d EEx ia [5]
Scanner card
Will communicate directly with PLC or DCS
Twisted pair
1900m [1]
126
93.75 Kbs
Daisy chain, trunk/drop, star
4
2
Yes
Yes
Yes
Yes
Yes
Yes
EEx d EEx ia [5]
Scanner card
Will communicate directly with PLC or DCS
2 Twisted pairs
500m [1]
63
125/250/500 Kbs
Trunk/drop, daisy chain
4
2
Yes
No
Yes
Yes
Yes
Yes
EEx d
Scanner card
Will communicate directly with PLC or DCS
[1] Repeaters may be used to extend the distance limits[2] Version 2.1[3] For further information, please contact your local TV&C Sales Office[4] Hermetically sealed housing[5] Number of addresses reduces for intrinsically safe hazardous areas
Note: The system designer must give due consideration to the constraints of distance and speed
Tyco Tyco Biffi, Tyco Biffi, Tyco
providing actuated valve packages capable of interfacing with the major network protocols‘‘ ’’
Safety Relief Valves
p13
Features
Technical Data
Materials
AndersonGreenwood, Crosby
AndersonGreenwood
AndersonGreenwood, Crosby,Sapag, Sempell,Triangle
Pressure Range:1 to 425 bar (up to 690 bar optional)
Sizes: 1” x 2” to 8” x 10”(single or dual outlet)
Temperature range:- 252°C to +538°C
� Capacity certified� High capacity� Full nozzle design� Conventional/bellows open
bonnet design� Design codes according to
ASME VIII / API 526 andTRD / AD 2
� Liquid trim design� In-situ testing� Cost effective maintenance� Flanged, threaded, hub, socket
and butt welded connections
Spring OperatedSafety Valves
Metal or soft seated range ofsafety valves for all processindustry applications
Pilot OperatedSafety Valves
� Pop or modulating action� Bubble tight performance� Low-cost maintenance� Not sensitive to back pressure� Externally adjustable
blowdown� Stable even in two-phase flow� In-situ testing available� High capacity/high pressure� Configurations to suit dirty
services
For premium tightness ondifficult services, such as gasliquid, steam, flashing fluids,cryogenics etc.
Pressure Class:ASME 150 to 2500PN 10 to 400
Sizes: 1/2” x 1” to 28” x 36”
Temperature range:-196°C to +815°C
End connections:Conforming to ASME/DIN connections
Carbon steelAustenitic stainless steelsHastelloyMonelDuplexInconel/incoloyTitaniumother materials on request
ASME 1- BoilerSafety Valves
Drum, superheater, reheater andeconomiser valves for all types ofboiler and steam systems
� Seat tightness up to 96%+ ofset pressure
� Exceptional tightnessminimises maintenanceresources and repairinterval times
� Reduced life cycle costs� Full and semi nozzle designs
available� Lift restriction facility available
on HCI style� Open and closed bonnets
available� Weather hoods for outdoor
service
Body/bonnet:
Carbon steel, Alloy steel,other body materials available on request
Stainless steel nozzle Stainless steel/inconel disc insert
Pressure Class:ASME 150 to 2500 Flanged or butt welded Inlets and flanged outlets
Sizes: 1 1/2” to 6” inlets
Temperature range:Saturated steam to 593°C
Carbon steelAustenitic stainless steelsHastelloyMonelDuplexInconel / IncoloyTitaniumother materials on request
a complete range ofsafety relief valves‘‘ ’’
Safety Relief Valves
p14
CommodityIndustrial Safety
Valves
Safety Selector andChangeover Valves
� Dual safety valves system� Either 1 valve active and 1
stand-by or 2 valves in serviceand possibility to isolate one formaintenance
� Guarantee less than 3%pressure drop
� Bleed valves standard� Enhanced external tightness
without bellows� Integral flat seats� Non-rotating stem� Positive drive chain interlocking
Carbon steelAustenitic stainless steelsBronzeIronAluminium
Assisted SafetyValves
� Equipped with additionalpneumatic actuator, controlledby a redundant system ofpressure sensors
� Can be combined with two ormore independent operatingvalves
� Complies with the (preliminary)EN 4126 part 5 and TRD 421
� Flexible design to suit any highpressure steam application
� Bell deflector for low noisecharacteristics
� No stuffing box, minimisingfriction
Carbon steelStainless steel,High temperature alloy steel
Pressure Class:ASME 150 to 900PN 10 to 63
Sizes: DN8-150 (1/4”-6”)
Temperature range:-196°C to + 427°C
End connections:to ASME/DIN standards
� Capacity certified� ASME I, IV, VIII� High capacity� Full or semi nozzle� Conventional/open bonnet
design
AndersonGreenwood
Kunkle Sempell
Metal or soft seated range ofsafety valves for all industrialapplications
Dual pressure relief system forall process industry applications
Controlled safety pressure reliefsystems to provide perfect tightnesson high pressure/high temperatureapplications such as boiler protection
Pressure Class:PN 40 to 400ASME 300 to 2500
Sizes: DN 150-400 (6”-16”)
Temperature range:20°C to 580°C
Carbon steelStainless steelDuplexother alloys
Seat: PTFE, PEEK or Grafoil
Pressure Class:Up to ASME 2500
Sizes: DN50-300 (1”-12”)
Temperature range:-252°C to +427°C
a complete range ofsafety relief valves‘‘ ’’
Features
Technical Data
Materials
Safety Relief Valves
p15
Features
Technical Data
Materials
Varec, WhessoeAndersonGreenwood
AndersonGreenwood, Luceat
Pressure class:up to 14 Barg
Sizes: 1/2”, 1” and 2”
Temperature range:Up to 260°C
� Pop or modulating action� Excels in cryogenic service� Externally adjustable blowdown� Not sensitive to back pressure� In-situ testing� Perfect tightness� Large capacities
Low Pressure PilotOperated
Safety Valves Safety valves for low pressuretanks, refrigerated, cryogenicand chemical processes andliquified gas carriers
Tank BlanketingRegulators
� Spring loaded or pilot operated� Perfect tightness� Single stage up to 14 bar of DP� One single setting� Reduced installation costs� Low cost maintenance
For preservation of storedliquids and safe operation of lowpressure storage tanks
Pressure class:Full vacuum to +3.5 bar
Sizes: 2” - 12”, vent orpiped outlet
Temperature range:-252°C to +205°C
AluminiumStainless steelCarbon steel
Seat: Elastomeric or plastic
Breather Valves
Pressure and vacuum reliefvalves for tank safety andintegrity
� Available in ’vent toatmosphere’ and in ‘pipe-away’ models
� Replaceable pressure andvacuum seat rings reducemaintenance time
� Steam jackets available� Options for severe chemical
service� Weight loaded/spring loaded
models available
Aluminium,Cast iron,Carbon steel, Stainless steel, Monel, other alloys
Pressure range:0.0025 barg to 3.5 barg
Vacuum range:-0.0025 barg to -0.8 barg
Sizes: DN50-300 (2”-12”)
End connections:Flanges to ASME, DIN orother standards
Carbon steelStainless steel
Seat: Elastomeric
the world’s leading specialists instorage tank equipment‘‘
’’
Safety Relief Valves
p16
Features
Technical Data
Materials
Gauge Hatches,Vents and other
Tank Accessories
� Emergency vents• Combined vacuum relief
available• Air cushion seat available
� Reserve capacity relief valves• For large LNG and LPG
tanks• Instantaneous opening• High capacity
� Gauge hatches• Locking mechanisms
available� Internal tank valves
• For cryogenic, lowtemperature and other tanks
• Bottom or side mounted• Pivot or plug style for high
capacities
Varec, Whessoe
Emergency relief man holecovers, gauge hatches,emergency vents and other tankaccessories
See individual product datasheetsfor further technical details
Aluminium,Carbon steel,Stainless steelSeats: Metal, Buna-N, PTFE
Flame andDetonationArresters
A complete range of flame anddetonation arresters for maximumprotection against flame andexplosion propagation
� Suitable for low flash-pointflammable gases or vapours
� In-line, end-of-line, or inconjunction with pressure andvacuum relief valves
� Suitable for gas groups IIA, IIBand IIC
� Special models for engineprotection
� Detonation and deflagrationunits available
� Minimal pressure drops� Designed to BS 7244, UL,
USCG and EN ‘long-burn’requirements
Aluminium,Cast iron,Carbon steel,Stainless steel,Hastelloy,other alloys
Sizes: DN8-600 (1/4”-24”)
Temperature range:-30°C to +150°C
Varec, Whessoe
the world’s leading specialists instorage tank equipment‘‘
’’
Safety Relief Valves
p17
Features
Technical Data
Materials
Whessoe
Designed to suit particular serviceconditions
Sizes: DN50-600 (2”-24”)
Floating Suctions
� Facilitates removal of productfrom stratified tanks, withoutremoval of water or tank debris
� Incorporates maintenance freeswivels
� Designed to avoid creating avortex
Prevents product contaminationby tank debris or water
Aluminium,Steel,Stainless steel
floating suctions, bursting discsand reheat isolation devices‘‘
’’
Dewrance,Raimondi, Sempell
Reheat IsolationDevices
For quick isolation of reheatsection of boiler for testing,maintenance etc.
� Pressure seal bonnet� Manufactured from cast or
forged steel� Eliminates pressure loss
experienced using normalisolation valves
� Alleviates the need for cuttinginto pipes and fitting blankingflanges
� Stellite seating faces� Designs in acc. with ASME
B16.34, API, DIN, TRD codes
Carbon steel, Alloy steelHigh alloy steel (9% Cr)
Pressure class:ASME 500 to 2500PN 100-320
Sizes: DN65-900 (2 1/2”-36”)
Temperature range:-30°C to +425°C
End connections:Butt weld
Instrument Valves & Enclosures
p18
Features
Technical Data
Materials
instrumentation valve solutions for static anddifferential pressure measurement
Primary InstrumentIsolation Valves
Instrument Valvesand Manifolds
� Single isolation valves forventing or isolating service
� 2, 3, 4 or 5 valve versions � Close coupling or remote
mounted � Suitable for coplanar or
biplanar transmitter flangeconnections
� Version to Shell internationalstandard
� Gas, liquid or steam service � Adjustable gland packing for
longer valve life� Non rotating ball end stem for
bubble tight shut off� Power or natural gas
configurations
Carbon SteelStainless SteelMonelDuplexand other exotic materials
InstrumentEnclosure Systems
� Choice of enclosure sizes� Complete design and
installation service � 2,3 and 5 valve enclosure
manifolds reduce internalbrackets and pipe work
� Weatherproof to IP 66� Complete range of
accessories, windows, cableglands and brackets
� Heated version available� Insulated version available
Tough, fire resistant GRP, Antistatic and insulated optionsavailable
Pressure Class:ASME 150 to 2500: 10,000 API
Sizes: 1/2” flanged NPS to 3” NPS
Temperature range:up to 538°C
� Primary isolation service� Replaces conventional bulky
valve assemblies� Close coupling of instruments� One piece forged body� Fire safe tested and certified
to API 607 � Flanged or threaded
connections� Needle / globe / ball valve
combinations� Meets ASME B16.5 and
B16.34 standard� Choice of block, block and
bleed and double block andbleed combinations
‘‘ ’’
AndersonGreenwoodInstrumentation
AndersonGreenwoodInstrumentation
AndersonGreenwoodInstrumentation
Instrument primary isolation forblock, block and bleed anddouble block and bleed service
Hand, gauge valves andmanifolds for instrument isolating,draining, calibrating and ventingservice
Protection of field instrumentationfrom cold temperatures andharsh environments
Pressure Range:6,000 psig (414 barg) as standard10,000 psig (690 barg) available
Sizes: 5L (single 330x400x428 mm)15L (double 500x495x600 mm)24L (multiple 800x495x600 mm)
Temperature range:from -70°C
Carbon Steel, Stainless SteelMonelDuplexand other exotic materials
Pressure Range:6,000 psig (414 barg) as standard10,000 psig (690 barg) available
Sizes: hand valves 1/4”- 1”manifolds 1/4” - 1/2”
Manifolds have 2 1/8” (54 mm) CTRS
Temperature range:up to 538°C
Steam & Power Products
p19
Features
Technical Data
Materials
DewranceRaimondi, Sempell
� Pressure seal bonnet� Manufactured from forged
steel� Parallel slide disc/split wedge� Stellite seating faces� Tailored bore design and
interpolated ratings available� Designs to ASME B16.34,
DIN, TRD
High Pressure SplitWedge and
Parallel Slide GateValves
Ideally suited for reliableisolation of high pressure andhigh temperature steam andwater
Pressure Class:ASME 900 to 4500
PN 160 to 720
Sizes: DN20-600 (3/4”-24”)
Temperature range:-30°C to +650°C
End connections:BWE
Carbon steel, Alloy steelHigh alloy steel (9% Cr)Stainless steelother exotic materials on request
High Pressure Parallel Slide Gate
Valves(Eyelet Design)
High pressure parallel slide gatevalves, with “low pressure loss”or “high velocity flow”specifications
� Pressure seal bonnet� Manufactured from cast steel� Parallel slide disc� Eyelet follower (conduit)� Stellite seating faces� Design to ASME B16.34
Carbon steel, Alloy steelHigh alloy steel (9% Cr)
Pressure Range:ASME 1000 to 2850
Sizes: DN125-600 (5”-24”)
Temperature range:-30°C to +650°C
End Connections:butt weld
’’
Fasani, Intervalve,Raimondi, Sapag
Pressure Class:ASME 900 to 2500
Sizes: DN50-600 (2”-24”)
Temperature range:-30°C to +650°C
End connections:Flanged and BWE
High PressureWedge
Gate Valves
� Pressure seal bonnet� Manufactured from cast steel� Various wedge configurations� Stellite seating faces� Full bore design� Designs to ASME B16.34,
PED
Suitable for a wide range ofpower applications
Carbon steel, Alloy steelHigh alloy steel (9% Cr)Stainless steelother exotic materials on request
gate valves for steam and the powergeneration industry‘‘
Steam & Power Products
p20
Features
Technical Data
Materials
globe and check valves for steam and thepower generation industry‘‘ ’’
Piston/Lift CheckValves
High PressureGlobe Valves
� Bolted and pressure sealbonnet designs available
� Manufactured from cast andforged steel
� Both ‘Y’, ‘T’ and elbow downpattern configurations available
� Stellite seating faces� Designs to ASME B16.34, DIN
and TRD Codes � Screw down non return models
available
Carbon steel, Alloy steelHigh alloy steel (9% Cr)Stainless steelother exotic materials on request
Swing and TiltingDisc Check Valves
� Bolted and pressure sealbonnet designs available
� Manufactured from cast andforged steel
� Stellite seating faces� Designs to ASME B16.34, DIN
and TRD codes
Carbon steel, Alloy steelHigh alloy steel (9% Cr)Stainless steelother exotic materials on request
Pressure class:ASME 150 to 2700PN 40 to 500
Sizes: DN50-600 (2”-24”)
Temperature range:-30°C to +650°C
End Connections:Flanged BWE and SWE
� Bolted and pressure sealbonnet designs available
� Manufactured from cast andforged steel
� Stellite seating faces� Designs to ASME B16.34,
DIN and TRD codes
Dewrance, Fasani,Hancock, Intervalve,Raimondi, Sapag,Sempell, Yarway
Dewrance, Fasani,Hancock,Intervalve, Sempell
Dewrance, Fasani,Intervalve, Raimondi,Sapag, Sempell
Suitable for non return dutiesin a wide range of powerapplications
Globe and screw down nonreturn valves suitable for a widerange of power applications
Suitable for non return dutiesin a wide range of powerapplications
Pressure class:ASME 900 to 2500PN 160 to 320
Sizes: DN50-600 (2”-24”)
Temperature range:-30°C to +650°C
End Connections:Flanged and BWE
Carbon steel, Alloy steelHigh alloy steel (9% Cr)Stainless steelother exotic materials on request
Pressure class:ASME 900 to 2700PN 160 to 500
Sizes: DN15-600 (1/2”-24”)
Temperature range:-30°C to +650°C
End Connections:Flanged BWE and SWE
Steam & Power Products
p21
Features
Technical Data
Materials
Steam Traps andStrainers
Bled Steam and ColdReheat Check Valves
Carbon steel, Alloy steelHigh alloy steel (9% Cr)
� Non-repairable drip and tracersteam traps• Thermostatic and
thermodynamic technologies� Repairable drip and tracer
steam traps• Thermostatic, thermodynamic
and variable orificetechnologies
• Unibody plus technology� Process steam traps
• Thermostatic dual range forbatch and continuous processapplications
• Thermostatic: high capacitiesup to 100,000 kg/hr
• Variable orifice technology forhigh pressure applications
• Lever technology for highcapacity applications
For use in dripleg, tracing andprocess applications
Specifically designed, “free toswing” check valve for bled steamor cold reheat non-returnapplications
Carbon steelStainless steelAlloy steel
Yarway Dewrance, Fasani,Sempell
Pressure Range:ASME 150 to 1000 PN 40-100
Temperature range:-30°C to +650°C
Size: DN 150-1000 (6”-40”)
End connections:Butt weld
� Bolted and pressure sealbonnet designs available
� Tilting disc or swing disc� Stellite seat faces� Counterweight available� Side mounted or centrally
mounted actuator� Pneumatic or gravity operation� Designs in accordance with
ASME B16.34, DIN, TRDcodes.
Pressure Class:ASME 150 to 4500 PN 25 to PN 640
Size: DN 10-100 (3/8”-4”)
End connections:flanged, socket or buttweld ends to DIN andASME standards
Carbon steelAlloy steel
Boiler Trim Valves
� Seatless valves• no seat, live loaded packing
and slow opening� Unit tandem
• combination ofhardseat/hardseat orhardseat/seatless in a single body
• reduces potential leaks• fits into confined space
� Hardseat valves• Stellite valve and seat• provides long service life• resistant to wear
Blow-Off and ContinuousBlowdown Valves
Pressure Range:ASME 300 to 2700
Size: DN 25-65 (1”-2 1/2”)
End connections:flanged, socket or buttweld ends to ASMEstandards
Hancock, Yarway
a complete range of boiler trimand control valves‘‘ ’’
Steam & Power Products
p22
Features
Materials
Technical Data
Pump ProtectionValves and Systems
� Single valve functions as• integral check valve,• flow sensing element, • bypass control valve, • bypass actuator• multistage pressure
letdown valve� Reduces installation and
maintenance costs� Eliminates cavitation in valve
and piping � Intrinsically safe mechanical
design with static seals,packless design, no leak pathto atmosphere
� Flow loop testing andperformance curve evaluationcertification
� Multi-stage turbo-cascadecontrol valve
Automatic minimum flow valvesor systems for the protection ofcentrifugal pumps
Narvik, Yarway
Pressure class:ASME 150 (PN 25/40) toASME 4500 (PN 640)
Sizes: DN 25-300 (1”-12”)
End connections:flanged or butt weld toASME or DIN standards
Boiler LevelGauges
� Complete range of products tocover mainly power applications:
� Mechanical • Two colour readings• Belleville washers design for
thermal expansion• High intensity illuminators• High quality mica protection
of inner glass surface� Electronic
• No moving parts• High/low water level trips
and alarms• Redundant power supplies• Fault diagnostic modules• Self calibrating• Bi-colour display indicator
� Magnetic• Anodised gold follower• Flag or follower design
Level visualisation in power andprocess applications
Carbon steelStainless steelAlloy steelHigh alloy steelOther exotic materials on request
Narvik, Penberthy,Yarway
Glasses: Transparent and reflex (LP and MP)Bulls eye type(HP steam/water)
Steam/water application:up to 207 bar at saturation T°
Process applications:-198°C to +315°C up to 413 bar
Water column electronic types:
Pressure rating:< 650 psi (45 bar), 2000 psi (138 bar) and 3000 psi (207 bar) water column
Probe temperature: 648°C maximum
a complete range of boiler trimand control valves‘‘ ’’
Carbon steelStainless steelAlloy steelPlastics
Steam & Power Products
p23
Features
Technical Data
Materials
Steam ConditioningValves and TurbineBypass Systems
Steam and FeedWater Control
Valves
Carbon steelStainless steelAlloy steel
� Single unit takes the place ofconventional pressure reducingand desuperheating systems
� Steam atomizing attemperatorwith very small water droplets
� No thermal shock protectionsleeve needed to protect thesteam pipe (HP design)
� Perforated plug, single ormultiple stage reducesnoise level
� LP, MP and HP turbine bypassvalves with hydraulic orpneumatic actuators
� LP, MP and HP turbine bypassvalves with quick openingsafety function as per Germancode TRD 421
� Perforated cage protects valvesagainst thermal shocks
� Easy accessible internal parts
Reducing of steam pressure andtemperature in one single unit
Control valves in water-steamcycles of power generation plants
Carbon steelAustenitic cast steelStainless steelAlloy steel
Sempell Sempell
Pressure class:ASME 300 (PN 64) to ASME 4500 (PN 640)
Sizes: DN 15-700 (1/2”-28”)
Temperature range:+20°C to +550°C
End connections:flanged or butt weld
� Low noise level and cavitationfree, due to multiple stagetrim system
� Pressure balanced plug giveslow stem forces
� Enlarged outlet size forreduction of velocity ofsteam-water mixture
� Easy to maintain and to re-fitinternal parts
� Separated throttling andsealing area
� Large volume body reduceseffects of flashing
� Construction according toDIN and ASME standards
a complete range of boiler trimand control valves‘‘ ’’
Pressure class:ASME 150 (PN 25/40) to ASME 4500 (PN 640)
Sizes: DN 10-600 (3/8”-24”)
Temperature range:+150°C to 600°C
End connections:flanged or butt weld
Carbon steelStainless steel Other materials on request
Desuperheaters
� Multiple nozzle, steamassisted, high temperaturedesuperheaters
� No thermal shock protectionsleeve needed to protect steampipe
� Easy installation: fewcomponents, compact size
� Excellent and near uniformspray quality
� Water capacities up to 100 m3/hr� Steam temperature: control
within 5°C of saturation� Repeatability ±1%� Large control range >1:60� Stellite seat for long life tight
shut-off� Construction to TRD100, ASME
B16.34, Stoomwezen (Holland),IBR IIIC (India), Austrian TÜV
A full range of control valves forprecise and economical controlof steam temperature
Pressure class:ASME 150 (PN 25/40) to ASME 2500 (PN 400)
Sizes: Water side:DN 25-80 (1”-3”)
Sizes: Steam side:DN 80-100 (3”-4”)
End connections:flanged acc. DIN, ASME, JIS and BS and butt weld
Narvik, Yarway
p24
Special Service Valves
fully lined equipment eliminates contamination and corrosion problems in areas of high purity and
in highly corrosive applications’’‘‘
Body: Carbon Steel
Disc and Seat: Carbon Steel orStainless Steelwith Stellitedoverlay
Materials
Technical Data
Features
Keystone,Neotecha
Pressure class:Full vacuum to PN 10
Sizes: DN 40 – 900 (1 1/2”-36”)
Temperature range:-40°C to +200°C
Flange accommodations:PN 10/16, ASME, JIS
Lined ButterflyValves
� Mechanical loadedshaft seals
� Polyester coated bodywithstanding severeatmospheric corrosion
� Serrated body flangesreduce the cold flow ofthe seat
� High Cv value� Actuator flange
according to ISO 5211� Self-lubricating bearing� TA-Luft approved
Wafer, lugged anddouble flanged linedbutterfly valves for highlycorrosive liquids, gasesand slurries
Body: Ductile iron
Disc: PFA, UHMWPE,stainless steel
Seat: PTFE, UHMWPE
Backing ring: Silicone, FPM
Klein
Pressure class:ANSI 150 to 600
Sizes: DN 50 – 800(2”-32”)
Temperature range:-29°C to +455°C
Flange accommodations:ASME
45° Y TypeAngle Slurry
Valves
� Split and monoblockbody
� Venture body in lowpressure and full borefor high pressure
� Over specification onwall thickness
� Low pressure drop� Installation on pipe or
direct mount on tank� Manual and large range
of electric, pneumaticand hydraulic actuator
� Proven design in highscale and abrasiveslurries
� PED approved
Flanged Y angle and tankbottom slurry globe valvefor isolation and drainhigh abrasive and scalingmedia
Lunkenheimer
Pressure class:ANSI 150 to 600
Sizes: DN50 – 900(2”-36”)
Temperature range:-29°C to +455°C
Flange accommodations:ASME
45° Y TypeAngle Slurry
Valves
� Bolted angle piston typecheck valve
� Angle, bayonet and 3waycombination valves arewith in line regrindableseat design
� Over specification onwall thickness
� Large stem diameter forstrength and stiffness
� Pinion shaft arrangementfor air motor operation
� Optional bolted clutcharrangement forhammerless operation
� Manual and large rangeof electric, pneumaticand hydraulic actuator
� Proven design in highscale and abrasiveslurries
� PED approved
Flanged 90° angle,bayonet, 3way combinationand check slurry valve forisolation and diverting highabrasive and scalingmedia
Body: Carbon Steel
Disc and Seat: Carbon Steel orStainless Steelwith Stellitedoverlay
Other materials on request
Gachot,Neotecha
� Body fully lined in PFA� High integrity stem
sealing and lined stem� Fugitive emission
detection systemavailable
� Full and reduced bore� Constant predictable
operating torque� Floating or integral
ball/stem� Dead space eliminated� Models for control
services� TA-Luft approved
Ball Valves
High performance, linedball valves for isolationand control in corrosiveapplications
Pressure class:Full vacuum to 16 bar and ASME 150
Sizes: DN 15-150 (1/2”-6”)
Temperature range:-40°C to +210°C
Body: Ductile iron or Carbon steel, PFA-lined
Ball: PFA-lined, ceramic
Seat: PTFE
Stem: PFA-lined
Other materials on request
Special Service Valves
p25
a wide range of valves for extremetemperatures and critical hazardous services‘‘
’’
Materials
Technical Data
Features
Bellows SealedGlobe Valves
� Proven technologies toguarantee “zero fugitiveemission”, including :• Central monitoring• Double containment• Double gasketing
� Approved for liquidchlorine applications
� Worldwide reputation forhazardous area valveapplications
� Wide range of internationalapprovals
� Manual, actuated andcontrol valves
Carbon steel, Stainless steel,Duplex alloy, Monel, Hastelloy,Inconel, Incoloy, Nickel, etc.according to service conditions
Descote, Klein
For critical hazardousservices such as liquefiedgas and all lethal, toxic,corrosive fluids in thechemical and petrochemicalindustry
Pressure Class:ASME 150 to 2500PN 16 to PN 420
Sizes: DN15-300 (1/2”-12”)
End Connections:flanged, BW, SW,threaded
Standards: ASME, BS,DIN, JIS, NFE, etc.
CryogenicTemperature
Service ValvesMany of the valve brandsincorporated in this brochureare suitable for, or can bereadily modified for, use in lowtemperature and cryogenicservice conditions
Anderson Greenwood,Crosby, Fasani, FCT, Hindle, Luceat,Raimondi, Vanessa
Body:Carbon Steels, Stainless SteelsSeats:PTFE or other, as specified
� Expertise in manufacturingand assembling to lowtemperature specifications
� In-house specialisedtesting facilities for seatarea and atmosphericleakage
� Capability to test atspecified temperaturesdown to –254°C
� Clean area assemblyfacilities
� Track record of majorcontract execution in thisspecialised field
� Extensive familiarity withmajor end userspecification requirements
Pressure Class:ANSI 150/300/600/900/1500
Sizes: DN8-1200 (1/4”-48”)
Temperature range:-20°C to -254°C
End ConnectionsAs specified
ReactorSampling
Systems PV
Neotecha
PFA Lined Stainless Steel
� Can be direct mounted onall reactors, lined, enameledor stainless steel
� Direct connection of the PFAheavy duty suction hose
� All wetted parts are PFA,PTFE or glass
� Ball check valve with softseal protects vacuum lineand is suitable for anautomated process
� Direct mounting of allauxiliary valves with integrated2-hole mounting flange
� Easy fitting of pH-probe� Transfer device eliminates
the need to stop the processor to open the reactor
� Modular design, varioustransfer devices andauxiliary valves can bemounted directly
Designed to handle highlycorrosive liquids. The lifting ofthe liquid sample takes placeduring the reaction process with aclosed reactor. No toxic gasesescape into the atmosphere
Neotecha
SamplingValves Sapro
Compact systems for theextraction of representativesamples from pipelines orreaction vessels, withoutprocess interruption
� Inline samplingguarantees a truerepresentative sample
� Offered with either abottle or syringecollection method
� PFA lining is available foraggressive services
� The reliability of eachsample is assured due tothe ease of assembly anddisassembly for cleaning
� The use of a universalseat for all sizes allows aquick and easy seatchange
� Tightness according EN12266, leakage rate Abubble tight
� TA-Luft approved
PFA LinedStainless SteelHastelloy
Sizes: Valve: DN 25 - 100(1”-4”) wafer orflangedSyringe: 20 - 250 ml
Pressure: Valve 16/25 barSyringe 10 bar
Vacuum: 0,1 mbarTemperature:SS up to 200°C
PFA lined up to 180°CSyringe: up to 160°C
Pressure: max. 10 bar
Temperature:max. 200 °C
Sample volume:150 / 250 / 500 ml
Hygienic Services
Features
Technical Data
Materials
Centrifugal PumpsMixproof processvalves
Hygienic butterflyvalves, actuators
and controls
Pressure rating:Full vacuum to PN 10
Sizes: DN25-150 (1”-6”)
Temperature range:-10°C to +95°C
� Available in stop-, multi-wayand tank bottom valves
� One piece body design� Water hammer proof� No additional CIP connections
needed � Patented double seat
design,100 % mixproof� In-line servicing and cleaning� Suitable to build manifolds
up to 150 valves� Integrated 3 position
pneumatic actuator forindependent seat lifting
� Control head available� Fieldbus compatible
Body: Stainless steel
Other parts: Stainless steel
Seat: PTFE, FPM
All components:Stainless steel
Seals: Stainless steel, silicium coated
Elastomers: NBR, EPDM, PTFE, FPM
Other materials available on request
� Standard electric motorsavailable in EEXe and EEXdversion
� Standard mechanical sealsacc. DIN 24960
� Favourable NPSH� Low noise� Suitable for CIP� Wide variety on available
options such as heatingjackets, frequency controllers,flushed seal, etc.
� Available with unions, planeends or flanges
� Designed according EHEDGrecommendations
� Self priming options available
� Offers huge potential savingsby greatly reducingmaintenance time
� Available to suit both imperialand metric tubing
� Approved food grade seatand seal material options
� Suitable for both isolation orflow control functions
� Bi-directional capability� One-piece, mirror polished
disc and stem assembly� High Cv, slim profile disc� Integral padlocking
Hovap Hovap Hovap, Keystone
EHEDG and 3A approved, lineardiverter valves suitable for alldemanding hygienicapplications in dairies, breweriesand all related food processes
Stainless steel, centrifugal pumpsdesigned to handle all foodprocess related liquids
Stainless steel butterfly valves inwafer, flanged, screwed or buttweld configurations for all shutoff and control applications inhygienic processes
Pressure rating:Full vacuum to PN 10
Sizes: DN10-150 (3/8”-6”)
Temperature range:-40°C to +110°C
End connections:Butt weld
process valves and pumps forhygienic applications‘‘
’’
Discharge pressures:Up to 60 bars
Maximum flow capacity:230 m3/h
Temperature range:up to 110°C
Body: Stainless steel
Disc: Stainless steel
Seat: Silicone, EPDM, FPM
p26
Aftermarket
p27
Valve RepairServices and Valve
testing
Valve Management
� Data integrity management• Proven methodology for
managing valve servicing • Data interface with clients
Maintenance ManagementSystem (MMS)
• Inventory reductions throughspares rationalisation, etc
� Valve criticality review• Maintenance strategy
development• Spares optimisation analysis
� Risk based inspection• Development of models for
valve RBI management andreporting
� Inventory management• Stock profiling• Component identification• Storage and logistics• Pre event coordination• Inventory reduction
� Safety valve performanceanalysis• Increased ‘meantime’
between service and/orfailure
• Verification against processconditions
Training
� Training courses at customer’spremises or at any of the Tycofacilities throughout Asia
� Safety valves• Maintenance, for technicians • Appreciation courses for
Supervisors and Managers • Refresher courses• Individually structured
courses to customer’srequirements
� Isolation valves, including:• ‘Triple off-set technology and
application• ‘Quarter Turn’ selection
criteria and application• ‘Safe sampling’ devices.
Selection, application andmaintenance
� Control and actuation• Electro (bus), hydraulic,
pneumatic interface devices.Selection, application andmaintenance
� Valve repair service• Safety valves (spring or pilot),
control valves, isolationvalves and actuators
• Fully trained and experiencedwork force
• Access to OEM technicaldata and support
• ISO 9002 accreditation• ISO /IEC 17025 accreditation• Onshore, offshore, marine• Fully equipped mobile
workshops, approved forhazardous areas
• Co-ordination andsupervision of shutdowns,start-ups, etc.
� Full range of safety valve testequipment• Suitable for flanged or
screwed connection• Suitable for operation on
gas, liquid or both• Manual or automatic
clamping• Safety interlock systems• Customised systems
available• Test pressures up to 10,000
psi (690 bar)� In-Situ safety valve test device
• Set pressure verificationwithout removing valve fromthe process line
• Suitable for most springoperated safety relief valves
Tyco TycoTyco
A full service capability of testingand repair, for all valve types,from all sources
Professional management ofuser’s valve population data toincrease efficiency and reduceoverall maintenance costs
Comprehensive range oftraining courses onvalve/actuator related subjects
a full range of valve management, training,servicing and testing facilities to valve users‘‘ ’’
TVC
SB
/002
0/E
N/0
810
www.tycoflowcontrol-asia.com
Tyco reserves the right to change product designs
and specifications without notice
Copyright © 2009 Tyco Flow Control. All rights reserved.
Recommended