View
2
Download
0
Category
Preview:
Citation preview
Heavy-Duty L ifts
18K 4-POST
ALIGNMENT L ifts18K 4-POST
Hofmann is committed to product innovation and improvement. Therefore, specifications listed in this sell sheet piece may change without notice. ©2020 Snap-on Incorporated. Hofmann is a trademark, registered in the United States and other countries, of Snap-on Incorporated. All rights reserved. All other marks are marks of their respective holders.02/2020 SS3318E
For more information regarding the 18k 4-Post Lift, call 800.251.4500 (US) or 800.267.2185 (Canada) www.hofmann-equipment.com
INDUSTRIAL STRENGTH LIFT SYSTEMHofmann’s 4-Post Alignment Lift offers 18,000 lbs of lifting capability and a lifting system that provides for high-wear resistance and a smooth gliding operation. The 18k 4-Post Alignment Lift features 21 positions for maximum flexibility.
Rollback Kit (EAK0277J39A)
Turnplates (EAK0289J06A)
OPTIONAL ACCESSORIES
18K FOUR POST LIFT FEATURES• Alignment level at twenty positions
• 24” (60.96cm) Pro-Style decks for wide-track vehicles
• High-performance 9/16” Ø, 6 x 37 lifting cables provide durability and added safety
• Larger 8” pulleys with high-performance fiber wound bushings for less wear and longer cable life
• Dura-Glide lifting system integrates low wear, ultra-high, molecular weight, polyethylene glide blocks to ensure long-term alignment accuracy and smooth operation
• Large profile columns have extra internal reinforced forms to spread and support the load
• 65” full floating rear slip plates
• Long 50” approach ramps provide gentle 10° drive-on angle for lower profile vehicles
• Filter/Regulator/Lubricator (FRL) protects air systems
• Certified and approved to the current ANSI/ALI lift standard
• Two 9,000 lb roller jacks
Roller Jack (EELR571A)
STANDARD ROLLER JACK
Technical SpecificationsPart number FPA18210
Maximum capacity 18,000 lbs (8,165kg)
4 wheel alignment wheelbase 86” - 144” (2,184-3,658mm)
2 wheel alignment wheelbase 203” (5,156mm)
General service wheelbase 220” (5,588mm)
Overall length 303.375” (7,706mm)
Overall width 152.125” (3,864mm)
Runway width 24” (610mm)
Max raised height 72” (1,829mm)
Min lowered height 9.5” (241mm)
Lifting time 70 seconds
Shipping weight 5,465 lbs (2,484kg)
Power requirements 230V 1Ph 60Hz 20A
Max operating pressure 2,650 PSI (183 BAR)
Air supply requirements 90 - 120 PSI (6 - 8 BAR)
Ramp approach angle (no shims) 10°
Roller Jack Specifications
Capacity 9,000 lbs (4,082kg)
Raised height 10-13-19” (254-330-483mm)
Lowered height 4.75” (121mm)
Lift pad height 1.5”, 6” (38mm, 152mm)
Shipping weight 320lbs (145kg)
Recommended