View
220
Download
0
Category
Preview:
Citation preview
8/6/2019 Hoisting System and Rotary Equipment
1/8
Hoisting System and rotary equipment
- Hoisting system and rotary equipment
8/6/2019 Hoisting System and Rotary Equipment
2/8
- Hoisting system and rotary equipment
Hook block
- The hook block is designed and manufactured in accordance with API spec 8C and other
related technical standards.
- The loaded parts are made of good-quality alloy steel.
- The traveling block and the hook block are designed integrally with a miniature size and a
compact structure, which is suitable for assembly on the truck-mounted drilling rigs.
8/6/2019 Hoisting System and Rotary Equipment
3/8
- Hoisting system and rotary equipmentSwivel
- The swivel is designed and manufactured in accordance with API Spec 8C, SY5210
and other related technical standards.
- The loaded parts are made of good-quality alloy steel.
- The flushing pipes and packing can be dismantled easily for replacement by design
of a portable packing unit.
Main technical specification for swivel
8/6/2019 Hoisting System and Rotary Equipment
4/8
- Hoisting system and rotary equipmentPower Swivel
Main technical specification for power swivel
8/6/2019 Hoisting System and Rotary Equipment
5/8
- Hoisting system and rotary equipmentDeadline Anchor
- The deadline anchor is designed and manufactured in accordance with SY5320 and
other technical standards.
- The main loaded parts are made of good-quality alloy steel.
- Each unit will be tested and inspected before delivery and detected with a non-
destructive detector strictly according to the related standards.
Main technical specification for deadline anchor (weight indicator)
8/6/2019 Hoisting System and Rotary Equipment
6/8
- Hoisting system and rotary equipmentKelly drive bushing
- The roller Kelly bushing is designed and manufactured in accordance with API 7K
and other technical standards.
- The loaded parts are made of good-quality alloy steel.
- A new structural design can insure a quick replacement of roller's wheel.
Main technical specification for roller bushing
8/6/2019 Hoisting System and Rotary Equipment
7/8
- Hoisting system and rotary equipment
Rotary table- The rotary table is designed and manufactured in accordance with API 7K and other
related technical standards.
- The rotary table has a good loading capacity with stable rotation.
- The rotary table can be lubricated well and locked safely, and is convenient for
maintenance.
Main technical specification for rotary table
8/6/2019 Hoisting System and Rotary Equipment
8/8
- Hoisting system and rotary equipmentRotary table
- Compared with conventional band brake, the hydraulic disc brake has a large
braking-torque capacity and a stable braking performance with a small inertia, and itcan be operated precisely and flexibly with convenience for debugging and
maintenance.
- This hydraulic disc brake can be used for working braking, emergency braking,
over-reel protection and shut off braking.
- There are motor-driven pumps and accumulators, manual pumps, heaters andcoolers to be equipped on the hydraulic station with the purpose of a dependablehydraulic-force supply to the executed units.
- An integral layout can be realized by adoption of a valve-type connection on the
power control system.
- Safety and inspection measures are strengthened under the guidance of the design
concept of "Humanism Above All" to meet the requirements of HSE.
Main technical specification for hydraulic disc brake
Recommended