View
37
Download
0
Category
Preview:
Citation preview
HOW TO ACTIVATE IPTV ON OPENBOX V9S VIA PORTAL
USING MAC ADDRESS
1. Press Menu Button on your remote and go to “NetCentre” and go to “Camds Setup”
2. Inside Camds Setup go in to IPTV
3. In IPTV choose Stalker in Type. Press “Blue” button on your remote to delete current
account and it will reveal your box’s exact MAC address.
4. In Host Name Enter portal address (same as you use for MAG devices). Use MAC
Address to activate line in your panel (use Add New MAG Device option in your
panel). After activating press OK on Default and if activation successful you will get a
message at the bottom “Status: Get Channel Success”
If you are getting error message “Get channel fail” please follow the steps at page 5
7. Now you can get all the channels here
8. To open the Favourite Groups or Categories press Play button on your remote
Troubleshooting If you are getting error message “Get channel fail” please follow the steps below:
Go to NetCentre --> Network Settings
Scroll Down to IPTV Cache Level
Recommended