Implant Prosthetics

Easy Abutment Clinical

and Laboratory Procedures

1 Abutment connection

Easy AbutmentSingle-tooth/Multiple-unit Restoration – Cement-retained

2 Impression abutment level

3 Laboratory procedures 4 Final restoration

35 Ncm

Remove the Healing abutment andplace the Easy Abutment usingUniGrip screwdriver

Finish tightening to 35 Ncmusing the Manual Torque Wrenchand UniGrip screwdriver

Easy Abutment

Block out the screw access hole with the screw access plug and snap on the Impression cap

Inject the impression material using the injection tip

Easy Abutment

Take a standard impression andsend it to the dental laboratory

Place the healing cap usingUniGrip screwdriver orprovisionalize the Easy abutment

Easy Abutment

Snap the Easy Abutment Replica into the captured Impression Cap

Create a model

Easy Abutment Laboratory Procedures

Wax the framework

Place the Plastic Coping (multiple)

Easy Abutment Laboratory Procedures

Invest and cast

Complete the restoration and returnto the dentist

Easy Abutment Laboratory Procedures