View
232
Download
0
Category
Preview:
Citation preview
Information procedure Page 1
Monthly Notifications Register
Notifications registered at CCMC from 2017-01-01 to 2017-01-31
Register issued on : 2017-02-03
A list of subsectors can be found at the end of this document.
Information procedure Page 2
Monthly Notifications Register
Notifications registered at CCMC from 2017-01-01 to 2017-01-31
Sector A : SERVICES
Register issued on : 2017-02-03
Page 3Subsector A05: MAINTENANCE SERVICES
Subsector : A05 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : t0114335/0001 Project Established
ICS :03.080.30, 03.080.30, 23.140
National Ref :Title : Competent services – Blowers – RulesScope : This standard includes rules for operating, structural feature, technical equipment, personnel
specifications and certification of competent services of blowers.
Relatedness :National : New
Subsector : A05 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : t0114336/0001 Project Established
ICS :03.080.30, 03.080.30, 43.060.10
National Ref :Title : Competent services – Engine Overhaul Machines – RulesScope : This standard includes rules for operating, structural feature, technical equipment, personnel
specifications and certification of competent services of Engine Overhaul Machines.
Relatedness :National : New
Subsector : A05 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : t0114337/0001 Project Established
ICS :03.080.30, 03.080.30, 75.200
National Ref :Title : Competent services – Natural Gas Regulation Stations – RulesScope : This standard includes rules for operating, structural feature, technical equipment, personnel
specifications and certification of competent services of natural gas regulation stations.
Relatedness :National : New
** End of Subsector **
Subsector A06: BUILDING AND CONSTRUCTION SERVICES
Subsector : A06 Registration Date : 2017-01-09Organization : SNCountry : Norway
Page 4
Project ID : NOT17006/0001 Published Standard
ICS : 27.010National Ref : NS 6430Title : General conditions of contract for energy performance contracting (EPC)Scope : The standard defines general conditions for energy performance contracting (EPC) for
engergy savings
Relatedness :National : New
Subsector : A06 Registration Date : 2017-01-09Organization : SNCountry : Norway
Project ID : NOT17013/0001 Published Standard
ICS : 91.010.20National Ref : NS 8404Title : General conditions of contract for independent control commissionsScope : The standard specifies general conditions of contract for independent control commissions
Relatedness :National : New
** End of Subsector **
Subsector A09: FACILITY MANAGEMENT
Subsector : A09 Registration Date : 2017-01-09Organization : SNCountry : Norway
Project ID : NOT17015/0001 Project Established
ICS : 91.040.01National Ref : NS 6422Title : Workplace environment - Process specificationScope : This document provides a process guidance for establishing workplace environment of office
solutions. This document does not include workplace design for manufacturing and other production
Relatedness :National : New
** End of Subsector **
Subsector A11: SAFETY AND SECURITY
Subsector : A11 Registration Date : 2017-01-09Organization : SNCountry : Norway
Project ID : NOT17009/0001 Published Standard
ICS : 03.100.01National Ref : NS 5831Title : Societal security - Protection against intentional undesirable actions - Requirements for
Page 5
security risk managementScope : Requirements for security risk prosedures and management in the built environment and
protection against intentional undesirable actions
Relatedness :National : New
Subsector : A11 Registration Date : 2017-01-09Organization : SNCountry : Norway
Project ID : NOT17010/0001 Published Standard
ICS : 03.100.01National Ref : NS 5832Title : Societal security - Protection against intentional undesirable actions - Requirements for
security risk analysisScope : Requirements and method for security risk analysis
Relatedness :National : New
Subsector : A11 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : t2013075/0001 Project Established
ICS : 03.080.30National Ref :Title : Work Places-Foodstuffs transport services-General rulesScope : This standard includes, general rules for management, transport vehicles characteristics,
foodstuffs transport serulces work places and personnel characteristics of raw, semi-product, food product material, food product additives, reserved for processing by-product and food pockages of work places – food stuffs transport services.
Relatedness :National : New
Subsector : A11 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : tst12831/0002 Project Established
ICS : 03.080.30, 29.130.01National Ref :Title : Authorised services - Rules for switching and control equipmentsScope : This standard includes rules for management, structural features, technical equipment,
personnel specifications and certification of authorised services of switching and control Equipments.
Relatedness :National : New
Page 6
Subsector : A11 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : tst12852/0001 Project Established
ICS :03.080.30, 23.020.10, 83.140.10
National Ref :Title : Competent services – Stationary tanks, hydrophores and expansion tanks - RulesScope : This standard includes rules for operating, structural feature, technical equipment, personnel
specifications and certification of competent services of stationary tanks, hydrophores and expansion tanks
Relatedness :National : New
Subsector : A11 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : tst13443/0001 Project Established
ICS : 03.080.30, 67.260National Ref :Title : Competent services - Rules for milling machinesScope : This standard includes rules for operating, structural feature, technical equipment, personnel
specifications and certification of competent services of milling machines.
Relatedness :National : New
Subsector : A11 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : tst13559/0001 Project Established
ICS : 03.080.30, 29.200National Ref :Title : Authorised services – Rules for voltage regulatorsScope : This standard includes microprocessor controlled voltage regulators competent authorized
services’ rules about technical equipment, operation management, structural situation and functions of staff.
Relatedness :National : New
Subsector : A11 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : tst13588/0001 Project Established
ICS : 03.080.30, 33.040.99National Ref :
Page 7
Title : Authorised services - Rules for satellite based positioning (GPS) and/or navigation equipments
Scope : This standard includes satellite based positioning equipments authorised services rules about technical equipment, operation management, structural situation and functions of staff.
Relatedness :National : New
** End of Subsector **
Subsector A99: UNDETERMINED
Subsector : A99 Registration Date : 2017-01-04Organization : SNCountry : Norway
Project ID : NOT17001/0001 Draft for public enquiry
ICS : 03.080.01National Ref : NS 8437Title : General conditions of contract for healthcare services at homeScope : This Standard regulates the general conditions of contract regarding healthcare services at
home between the municipality as a contracting entity and the supplier of healthcare services. In this context the healthcare services includes treatment, rehabilitation and interdisciplinary cooperation also related to practical help with daily life’s different tasks.
Relatedness :National : New
Subsector : A99 (Secondary Subsector)
Registration Date : 2017-01-13
Organization : TSECountry : Turkey
Project ID : tst12852/0001 Project Established
ICS :03.080.30, 23.020.10, 83.140.10
National Ref :Title : Competent services – Stationary tanks, hydrophores and expansion tanks - RulesScope : This standard includes rules for operating, structural feature, technical equipment, personnel
specifications and certification of competent services of stationary tanks, hydrophores and expansion tanks
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 8
Monthly Notifications Register
Notifications registered at CCMC from 2017-01-01 to 2017-01-31
Sector B : BUILDING AND CONSTRUCTION
Register issued on : 2017-02-03
Page 9Subsector B01: FIRE PROTECTION
Subsector : B01 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 03101113/0001 Project Established
ICS :National Ref : 03101113Title : Firefighting and fire protection - Terms; Amendment A2
Relatedness :National : New
Subsector : B01 Registration Date : 2017-01-09Organization : SNCountry : Norway
Project ID : NOT17012/0001 Published Standard
ICS : 13.220.20National Ref : NS 3960Title : Fire detection and fire alarm systems - Design, installation, operation and maintenanceScope : The standard specifies design, installation, operation and maintenance for fire detection and
fire alarm systems
Relatedness :National : New
** End of Subsector **
Subsector B02: STRUCTURES
Subsector : B02 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 00517914/0001 Project Established
ICS :National Ref : 00517914Title : Masonry - Part 4: Prefabricated masonry compound units
Relatedness :National : New
Subsector : B02 Registration Date : 2017-01-05Organization : UNMZ Draft Issue Date : 2017-01-04Country : Czech Republic Latest Date for Comments : 2017-01-30
Project ID : 73008516/0001 Project Established
ICS :National Ref :Title : Fibre-reinforced concrete – Testing of fresh fibre-reinforced concreteScope : The aim of the modification is unification of the standard according to the other standards.
Relatedness :
Page 10
National : REV/AMD CSN P 73 2451 (2015)
Subsector : B02 Registration Date : 2017-01-23Organization : UNMZ Draft Issue Date : 2016-09-30Country : Czech Republic Latest Date for Comments : 2016-11-30
Project ID : 75002616/0001 Project Established
ICS :National Ref :Title :
Amelioration–IrrigationrequirementScope : This standard applies to the determination of the needs of irrigation water in the design and
assessment of structures and facilities of any management supplemental irrigation and irrigation management operation.
Relatedness :National : REV/AMD CSN 75 0434 (1994)
** End of Subsector **
Subsector B03: CONCRETE
Subsector : B03 Registration Date : 2017-01-09Organization : SNCountry : Norway
Project ID : NOT17003/0001 Published Standard
ICS : 91.080.40National Ref : NS 3511Title : Measurement of the relative humidity (RH) in concreteScope : The standard gives requirement for the method for measurement of the relative humidity
(RH) in concrete
Relatedness :National : New
** End of Subsector **
Subsector B07: GLASS
Subsector : B07 Registration Date : 2017-01-05Organization : NENCountry : Netherlands
Project ID : 50002015/0001 Project Established
ICS : 65.040.30, 81.040.20National Ref : NEN 2675:2016 nlTitle : Greenhouse glass - Determination of the light transmittanceScope : NEN 2675 gives measurement methods for the determination of the transmission and light
diffusion of sun light greenhouse and screen materials.
Relatedness :National : New
** End of Subsector **
Page 11Subsector B09: THERMAL MATTERS
Subsector : B09 Registration Date : 2017-01-19Organization : SNV Draft Issue Date : 2017-01-17Country : Switzerland Latest Date for Comments : 2017-03-29
Project ID : CH170001/0001 Draft for public enquiry
ICS : 91.120.10National Ref : prSIA 279Title : Heat-insulating construction materials
Relatedness :National : REV/AMD SIA 279:2011
** End of Subsector **
Subsector B10: TIMBER STRUCTURES
Subsector : B10 Registration Date : 2017-01-09Organization : SNCountry : Norway
Project ID : NOT17004/0001 Published Standard
ICS : 79.040National Ref : NS 3512Title : Measurement of moisture in timber structuresScope : The standard gives requirement for the method for measurement of moisture in timber
structures
Relatedness :National : New
** End of Subsector **
Subsector B12: MASONRY
Subsector : B12 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 00517913/0001 Project Established
ICS : 91.100.25National Ref : DIN 105-4Title : Clay bricks - Part 4: Ceramic bricks
Relatedness :National : New
Subsector : B12 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 00517916/0001 Project Established
ICS :National Ref : 00517916
Page 12
Title : Site made masonry mortars
Relatedness :National : New
** End of Subsector **
Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY
Subsector : B17 Registration Date : 2017-01-31Organization : UNICountry : Italy
Project ID : 01602483/0001 Project Established
ICS : 91.120.10, 91.160.01National Ref : UNI1602483Title : Light and lighting - Computerized calculation tool for determining the LENI according to
the EN 15193 comprehensive methodScope : The technical report will be help the calculation the LENI using the comprehensive method
calculation provided by the EN 15193-1 and a specially written software program. The goal of this tool is to help the use of the LENI software. The software has a graphical interface that allows,step-by-step,theguidedinputofthedatarequired.LENI is calculated for one room, one floor and/on one building. The scope will be for non-residentialbuildingsasprescribedbytheEN15193-1.
Relatedness :National : New
Subsector : B17 Registration Date : 2017-01-18Organization : UNMZ Draft Issue Date : 2017-01-18Country : Czech Republic Latest Date for Comments : 2017-02-10
Project ID : 73001716/0001 Project Established
ICS :National Ref :Title : Daylighting in buildings – Part 1: Basic RequierementsScope : The aim of the modification is unification of the standard according to the other standards.
Relatedness :National : REV/AMD CSN73 0580-1 (2007)
** End of Subsector **
Subsector B18: SCAFFOLDING
Subsector : B18 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 00517920/0001 Project Established
ICS :National Ref : 00517920Title : Mechanical security equipment - Part 1: Burglar resistant products for port installation for
windows and doors - Requirements and test methods
Relatedness :
Page 13
National : New
** End of Subsector **
Subsector B20: DRAINAGE EQUIPMENT
Subsector : B20 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 11904175/0001 Project Established
ICS :National Ref : 11904175Title : Dirt trap for manhole covers
Relatedness :National : New
Subsector : B20 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 11904176/0001 Project Established
ICS :National Ref : 11904176Title : Sewage Fittings - Technical specifications for delivery for fittings from cast iron, concrete
and concrete in connection with cast iron
Relatedness :National : New
Subsector : B20 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 11904177/0001 Project Established
ICS :National Ref : 11904177Title : Concrete elements and buckets for gullies - Class A and class B - Concrete elements
Relatedness :National : New
Subsector : B20 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 11904178/0001 Project Established
ICS :National Ref : 11904178Title : Concrete elements and buckets for gullies - Classes A and B - Buckets
Relatedness :
Page 14
National : New
Subsector : B20 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 11904179/0001 Project Established
ICS :National Ref : 11904179Title : Concrete elements and buckets for road gullies - Part 3: Concrete elements
Relatedness :National : New
** End of Subsector **
Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT
Subsector : B25 Registration Date : 2017-01-31Organization : UNICountry : Italy
Project ID : 01602593/0001 Project Established
ICS : 91.140.40National Ref : UNI1602593Title : Gasmeasuringsystems–Hourlygasmeasuringdevices
Meteringtelemanagement-SafeUseofintegratedcontrolledremotelyvalveScope : This technical report identifies the temporary instruction for the use of the integrated
electrovalve in the smart meter G4 and G6; this technical report also defines tests to be carried out on smart meter in order to collect homogeneous and comparable data to verify the reliability of electrovalve over time.
Relatedness :National : New
** End of Subsector **
Subsector B99: UNDETERMINED
Subsector : B99 Registration Date : 2017-01-20Organization : SFS Draft Issue Date : 2016-11-09Country : Finland Latest Date for Comments : 2017-01-10
Project ID : 0000E385/0001 Draft for public enquiry
ICS :National Ref :Title : The periodic safety inspections on power operated doors and gates
Relatedness :National : New
Subsector : B99 Registration Date : 2017-01-20Organization : ASICountry : Austria
Page 15
Project ID : 00027055/0001 Project Established
ICS : 91.100.50National Ref : ÖNORM B 3661Title : Flexible sheets for waterproofing - Underlays for discontinuous roofing - National
implementation of ÖNORM EN 13859-1Scope : This standard is used for the implementation of ÖNORM EN 13859-1. The present document
determines in clause 5 the minimum technical requirements for flexible sheets for waterproofing as underlays for discontinuous roofing in terms of basic usability in Austria. The specific requirements for bitumen and plastic sheets that come in Austria for the application are in clause 6 and clause 7.
Relatedness :National : New
Subsector : B99 Registration Date : 2017-01-20Organization : ASICountry : Austria
Project ID : 00027057/0001 Project Established
ICS : 91.010.99National Ref : ÖNORM B 3114Title : Construction and testing of burial sites and monumentsScope : This Austrian Standard includes technical requirements for construction and testing of burial
sites and new constructed monuments.
Relatedness :National : New
Subsector : B99 Registration Date : 2017-01-09Organization : SNCountry : Norway
Project ID : NOT17011/0001 Published Standard
ICS : 91.010.30National Ref : NS 3457-3Title : Classification of construction works - Part 3: Building typesScope : The standard specifies classification of building types
Relatedness :National : New
Subsector : B99 Registration Date : 2017-01-09Organization : SNCountry : Norway
Project ID : NOT17014/0001 Published Standard
ICS : 65.150National Ref : NS 9616Title : Landbased aquaculture farms for fish - Requirements for risk analyses, design,
execution, operation, user handbook and product data sheetScope : The standard specifies requirements for risk analyses, design, execution, operation, user
handbook and product data sheet for landbased aquaculture farms for fish
Page 16
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 17
Monthly Notifications Register
Notifications registered at CCMC from 2017-01-01 to 2017-01-31
Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS
Register issued on : 2017-02-03
Page 18Subsector C01: Food products
Subsector : C01 Registration Date : 2017-01-31Organization : UNICountry : Italy
Project ID : 01602531/0001 Project Established
ICS : 67.250National Ref : UNI1602531Title : Metallic closures in contact with foodsuffs – Determination of Polyadipates (PAD) having
molecular weight lower than 1000 Da in vegetal oil (D2) food simulantScope : This standard is related to a methodology that make use of liquid chromatography mass
spectrometry (LC-MS) in order to determinate the specific migration of polyadipates (PAD) with molecular weight lower than 1000 Da in vegetal oil D2 food simulant from metallic closures. The LC-MS method is suitable for the quantitative determination of PAD from the LoQ to 300 mg/kg food simulant, according to the explained test conditions. For the determination, PAD analytical standards from the producers or from the users are required. In order to cover the potential difficulties in finding the standards and the information concerning their molecular weights (essential data for the determination of the results), three other approaches are proposed as alternatives. The first one is based on the co-definition between the involved parts of a percentage relate to molecular weights distribution <1000 Da; the second one suggest the determination of this value according to UNI CEN/TS 14577; the third is based onto gaschromatography mass spectrometry (GC-MS; however, for this method, no validation and precision data are available).
Relatedness :National : New
Subsector : C01 Registration Date : 2017-01-31Organization : UNICountry : Italy
Project ID : 01602580/0001 Project Established
ICS : 67.020, 67.260National Ref : UNI1602580Title : Appliances for the production and dispense of hot beverages for use in commercial and
communities -Test methods and migration limits of lead and nickelScope : This standard specifies migration limits of lead and nichel in appliances for the production
and dispense of hot beverages for public catering.
Relatedness :National : REV/AMD UNI 11460:2012
Subsector : C01 Registration Date : 2017-01-04Organization : UNMSCountry : Slovakia
Project ID : 46600117/0001 Project Established
ICS : 19.020, 67.060National Ref :Title : Cereals for human consumption. Part 2: Grain of wheat for human consumptionScope : The subject of revision of the Slovak Technical Standard for wheat will be changes in classes
and parameters of wheat quality. Updated will be testing methods of parameters. The aim of revision will be better and more accurate characterization of the highest quality wheat to
Page 19
enhance competitiveness of this wheat.
Relatedness :National : REV/AMD STN 46 1100-2: 2003
Subsector : C01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : t1004187/0001 Project Established
ICS : 67.080.10National Ref :Title : Apricot JamScope : This Standard contains the apricot jams manufactured by using fruit of apricot (Prunus
armeniaea L.) and does not contain special apricot jam manufactured for diet.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : t1005135/0001 Project Established
ICS : 67.080.10National Ref :Title : Rose JamScope : This Standard contains the rose jams manufactured by using fruit of rose (Rose domescena
M.) and does not contain special rose jam manufactured for diet.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : t1005136/0001 Project Established
ICS : 67.080.10National Ref :Title : Figs JamScope : This Standard contains the figs jams manufactured by using fruit of figs (Ficus carica
L.Domestica.) and does not contain special figs jam manufactured for diet.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : t1008761/0001 Project Established
Page 20
ICS : 67.080.20National Ref :Title : Canned Chick Peas With Vegetable Oil-Ready to Serve Scope : This standard applies to canned chick peas with vegetable oil which is ready to serve.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : t1009534/0001 Project Established
ICS : 67.080.20National Ref :Title : Canned Stuffed Cabbage With Vegetable Oil- Ready to ServeScope : This standard applies to canned stuffed cabbage with vegetable oil which is ready to serve.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : t1013573/0001 Project Established
ICS : 03.080.30National Ref :Title : Workplaces – Consultancy services – The classification – General and spesific rulesScope : This standard includes general and spesific rules of workplaces of consultancy services and
classification.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : t2003958/0001 Project Established
ICS : 67.080.10National Ref :Title : Sour Cherry JamScope : This Standard comprises jams that are produced from cherry (Prunus cernausus L.), but
doesn’t comprise special cherry jam intended for diet.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Page 21
Project ID : t2004186/0001 Project Established
ICS : 67.080.10National Ref :Title : Strawberry Jam Scope : This Standard contains the jams manufactured by using fruit of strawberry (Fragaria vesca L.)
and does not contain special strawberry jam manufactured for diet.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : t2004188/0001 Project Established
ICS : 67.080.10National Ref :Title : Quince Jam Scope : This Standard contains the sour quince jams manufactured by using fruit of quince (Cydonia
vulgaris Pers.) and does not contain special quince jam manufactured for diet.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : t2009255/0001 Project Established
ICS : 67.080.20National Ref :Title : Cabbage- FrozenScope : This standard applies to frozen cabbage.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : t2009974/0001 Project Established
ICS : 67.080.20National Ref :Title : Frozen Green Broad Beans Scope : This standard applies to frozen green broad beans.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-01-27
Page 22
Organization : TSECountry : Turkey
Project ID : t2012915/0001 Project Established
ICS : 67.080.20National Ref :Title : Canned PearsScope : This standard covers canned pears
Relatedness :National : New
Subsector : C01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : t2012916/0001 Project Established
ICS : 67.080.20National Ref :Title : Canned Asparagus Scope : This standard covers canned Asparagus
Relatedness :National : New
Subsector : C01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : t2012928/0001 Project Established
ICS : 67.080.20National Ref :Title : Canned cornScope : This standard covers canned corn
Relatedness :National : New
Subsector : C01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : t3001467/0001 Project Established
ICS : 67.080.20National Ref :Title : Canned OkrasScope : This standard applies to canned okras.
Relatedness :National : New
** End of Subsector **
Page 23Subsector C02: PAINTS AND RELATED PRODUCTS
Subsector : C02 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 00200940/0001 Project Established
ICS : 87.040National Ref : DIN 55655-7Title : Paints and varnishes - Electro-deposition paints - Part 7: Wet-film resistance
Relatedness :National : New
Subsector : C02 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 00200941/0001 Project Established
ICS : 87.040National Ref : DIN 55655-8Title : Paints and varnishes - Electro-deposition paints - Part 8: Electric charge density
Relatedness :National : New
Subsector : C02 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 00200942/0001 Project Established
ICS : 87.040National Ref : DIN 55655-9Title : Paints and varnishes - Electro-deposition paints - Part 9: Stoving loss
Relatedness :National : New
Subsector : C02 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : tst11653/0001 Project Established
ICS : 73.080, 85.040, 87.040National Ref :Title : Calcite- Used for Paper IndustryScope : This standard covers the precipite and natural calcite in paper inustry used as coating or
filling materials.
Relatedness :National : New
** End of Subsector **
Page 24Subsector C03: CHEMISTRY
Subsector : C03 Registration Date : 2017-01-16Organization : ISSCountry : Serbia Latest Date for Comments : 2017-03-13
Project ID : 00060028/0001 Draft for public enquiry
ICS : 71.080.10National Ref : nkSRPS H.B9.200:2016Title : Standard Test Method for Hydrocarbon Traces in Propylene Concentrates by Gas
ChromatographyScope : This test method covers the determination of 5 to 500 ppm each of ethylene, total
butylenes, acetylene, methyl acetylene, propadiene, and butadiene in propylene concentrates.
Relatedness :National : New
** End of Subsector **
Subsector C04: LABORATORY GLASSWARE
Subsector : C04 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 06234802/0001 Project Established
ICS : 29.120.30National Ref : DIN 19262Title : pH measurement - Plug socket and plug shielded for pH electrodes and pH measuring
chains
Relatedness :National : New
** End of Subsector **
Subsector C17: TREES AND PLANTS
Subsector : C17 (Secondary Subsector)
Registration Date : 2017-01-04
Organization : UNMSCountry : Slovakia
Project ID : 46600117/0001 Project Established
ICS : 19.020, 67.060National Ref :Title : Cereals for human consumption. Part 2: Grain of wheat for human consumptionScope : The subject of revision of the Slovak Technical Standard for wheat will be changes in classes
and parameters of wheat quality. Updated will be testing methods of parameters. The aim of revision will be better and more accurate characterization of the highest quality wheat to enhance competitiveness of this wheat.
Relatedness :National : REV/AMD STN 46 1100-2: 2003
** End of Subsector **
Page 25Subsector C20: EXPLOSIVES AND FIREWORKS
Subsector : C20 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : t0112743/0001 Project Established
ICS : 71.100.30, 95.020National Ref :Title : Mine action - Post-clearance documentationScope : This standard provides guidance on the procedural requirements for the handover of
cleared land, and details responsibilities and obligations.
Relatedness :National : New
** End of Subsector **
Subsector C99: UNDETERMINED
Subsector : C99 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 05701947/0001 Project Established
ICS :National Ref : 05701947Title : Food hygiene - Production and dispense of cream from cream whipping machines -
Hygiene requirements, testing
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 26
Monthly Notifications Register
Notifications registered at CCMC from 2017-01-01 to 2017-01-31
Sector F : FUNDAMENTAL STANDARDS
Register issued on : 2017-02-03
Page 27Subsector F06: TERMINOLOGY PRINCIPLES
Subsector : F06 Registration Date : 2017-01-20Organization : ASICountry : Austria
Project ID : 00027054/0001 Project Established
ICS :03.080.01, 03.100.01, 03.100.30, 03.100.40
National Ref : ÖNORM D 1204Title : Translation Services -- Project ManagementScope : The present ÖNORM deals with the various steps to be observed while managing translation
services and describes the professional requirements and competences with regard to project managers in charge of those services. The standard will give translation project managers a practical orientation and will contribute to a harmonised approach to translation management tasks. Furthermore, by describing the processes in connection with translation projects, it intends to provide customers with information about how to support a rational und smooth flow of the translation process through proper preparation of the content to be translated prior to awarding the translation contract
Relatedness :National : New
** End of Subsector **
Subsector F07: DOCUMENTATION AND INFORMATION
Subsector : F07 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 00900113/0001 Project Established
ICS :National Ref : 00900113Title : Effectiveness of paper deacidification processes
Relatedness :National : New
** End of Subsector **
Subsector F12: INFORMATION PROCESSING SYSTEMS
Subsector : F12 Registration Date : 2017-01-17Organization : LSTCountry : Lithuania
Project ID : 10002417/0001 Project Established
ICS : 35.040.10National Ref :Title : Information Technology. Coding of Lithuanian accented letters using several bytesScope : This standard specifies coding of Lithuanian accented letters not covered by ISO/IEC 10646.
Relatedness :National : New
Page 28
Subsector : F12 Registration Date : 2017-01-17Organization : LSTCountry : Lithuania
Project ID : 10002418/0001 Project Established
ICS : 35.040.10National Ref :Title : Information Technology. Input of Lithuanian accented letters using the keyboardScope : This standard specifies the input extension method for entering Lithuanian accented letters
using the standard keyboard.
Relatedness :National : New
** End of Subsector **
Subsector F15: MATERIAL TESTING IN GENERAL
Subsector : F15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 06234914/0001 Project Established
ICS :National Ref : 06234914Title : Rockwell penetration test to evaluate the adhesion of carbon layers
Relatedness :National : New
** End of Subsector **
Subsector F20: QUALITY ASSURANCE
Subsector : F20 Registration Date : 2017-01-26Organization : SISCountry : Sweden Latest Date for Comments : 2017-03-26
Project ID : 00624070/0002 Project Established
ICS :National Ref : 624070Title : Quality management - The process for competence managementScope : Denna standard ger riktlinjer för kompetensförsörjningsprocessen och är tillämpbar på alla
organisationer, oberoende av bransch, storlek och den produkt eller tjänst som tillhandahålls.
Relatedness :National : New
Subsector : F20 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 14700657/0001 Project Established
ICS : 01.040.03
Page 29
National Ref : DIN 55350-100Title : Concepts for quality management and statistics - Part 100: Quality management
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 30
Monthly Notifications Register
Notifications registered at CCMC from 2017-01-01 to 2017-01-31
Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE
Register issued on : 2017-02-03
Page 31Subsector H04: SPORTS EQUIPMENT
Subsector : H04 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 11201193/0001 Project Established
ICS :National Ref : 11201193Title : Gymnastic and playing field equipment - Electrically operated lifting devices - Safety
requirements and testing
Relatedness :National : New
** End of Subsector **
Subsector H09: FURNITURE
Subsector : H09 Registration Date : 2017-01-31Organization : UNICountry : Italy
Project ID : 01602558/0001 Project Established
ICS : 97.140National Ref : UNI1602558Title : Furniture - Technical specification for the purchase of school furnitureScope : This Technical Report is a guide to draft technical specifications for the purchase of school
furniture.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 32
Monthly Notifications Register
Notifications registered at CCMC from 2017-01-01 to 2017-01-31
Sector I : MECHANICAL ENGINEERING
Register issued on : 2017-02-03
Page 33Subsector I02: FASTENERS
Subsector : I02 (Secondary Subsector)
Registration Date : 2017-01-27
Organization : TSECountry : Turkey
Project ID : tst01030/0001 Project Established
ICS : 21.060.10, 23.040.40National Ref :Title : Plugs With Metric Fine ThreadScope : This standard cover fine threaded metric plugs as shown in the standard. I does not cover
other types of plugs.
Relatedness :National : New
Subsector : I02 (Secondary Subsector)
Registration Date : 2017-01-27
Organization : TSECountry : Turkey
Project ID : tst12432/0001 Project Established
ICS : 21.060.10, 23.040.40National Ref :Title : Hexagon fit bolts for structural steel bolting for supply with or without nutScope : This standard specifies requirements for M12 to M30 hexagon fit bolts assigned to product
grade C for use in structural steel bolting.
Relatedness :National : NewEuropean : Not Equivalent to DIN 7968:2017
Subsector : I02 (Secondary Subsector)
Registration Date : 2017-01-27
Organization : TSECountry : Turkey
Project ID : tst12433/0001 Project Established
ICS : 21.060.10, 23.040.40National Ref :Title : Reduced shank bolts and screws with coarse threadScope : This standard specifies requirements for M2,5 to M30 bolts and screw (bolts, for short) with
various head styles and a diameter of the unthreaded portion of the shank smaller than the minor diameter. Alt hough such bolts have a reduced shank, they are not waisted shank bolts.
Relatedness :National : NewEuropean : Not Equivalent to DIN 6929:2013
** End of Subsector **
Subsector I09: SMALL TOOLS
Subsector : I09 Registration Date : 2017-01-16
Page 34
Organization : DINCountry : Germany
Project ID : 12102711/0001 Project Established
ICS :National Ref : 12102711Title : Concept for the design of 3D models based on properties according to DIN 4000 - Part
180: Tool assemblies
Relatedness :National : New
Subsector : I09 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 12102716/0001 Project Established
ICS : 21.060.10National Ref : DIN 9841Title : Hexagon socket head shoulder screw for press tools
Relatedness :National : New
** End of Subsector **
Subsector I14: GEARS
Subsector : I14 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 06003739/0001 Project Established
ICS : 01.040.21National Ref : DIN 3975-1Title : Definitions and parameters on cylindrical worm gear pairs with rectangular crossing
shafts - Part 1: Worm and worm wheel
Relatedness :National : New
** End of Subsector **
Subsector I18: MINING
Subsector : I18 Registration Date : 2017-01-24Organization : ISSCountry : Serbia Latest Date for Comments : 2017-03-27
Project ID : 00054555/0001 Draft for public enquiry
ICS :National Ref : nkSRPS M.J6.009:2016Title : Bond's grindability ball mill work indexScope : This Standard specifies metod for the determination of Bond's grindability ball mill Work
Index for solid mineral raw and other industrial materials. In Annex A date are average values
Page 35
of Bond's Work Index for some types of materials.
Relatedness :National : New
** End of Subsector **
Subsector I99: UNDETERMINED
Subsector : I99 Registration Date : 2017-01-31Organization : SISCountry : Sweden Latest Date for Comments : 2017-03-30
Project ID : 00111185/0001 Project Established
ICS : 77.140.80National Ref : 111185Title : Identification marking for gas, liquid and ventilationg installationsScope : This standard specifies a separately cast test sample for evaluation of the nodularity of
graphite in spheroidal graphite iron castings, with a maximum wall thickness of 20 mm. For heavy section spheroidal graphite castings the cast-on test sample according to SS-EN 1563:2012, Figure 4, is recommended.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 36
Monthly Notifications Register
Notifications registered at CCMC from 2017-01-01 to 2017-01-31
Sector M : METALLIC MATERIALS
Register issued on : 2017-02-03
Page 37Subsector M01: STEEL
Subsector : M01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : tst01030/0001 Project Established
ICS : 21.060.10, 23.040.40National Ref :Title : Plugs With Metric Fine ThreadScope : This standard cover fine threaded metric plugs as shown in the standard. I does not cover
other types of plugs.
Relatedness :National : New
Subsector : M01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : tst12432/0001 Project Established
ICS : 21.060.10, 23.040.40National Ref :Title : Hexagon fit bolts for structural steel bolting for supply with or without nutScope : This standard specifies requirements for M12 to M30 hexagon fit bolts assigned to product
grade C for use in structural steel bolting.
Relatedness :National : NewEuropean : Not Equivalent to DIN 7968:2017
Subsector : M01 Registration Date : 2017-01-27Organization : TSECountry : Turkey
Project ID : tst12433/0001 Project Established
ICS : 21.060.10, 23.040.40National Ref :Title : Reduced shank bolts and screws with coarse threadScope : This standard specifies requirements for M2,5 to M30 bolts and screw (bolts, for short) with
various head styles and a diameter of the unthreaded portion of the shank smaller than the minor diameter. Alt hough such bolts have a reduced shank, they are not waisted shank bolts.
Relatedness :National : NewEuropean : Not Equivalent to DIN 6929:2013
** End of Subsector **
Subsector M04: COPPER
Subsector : M04 Registration Date : 2017-01-18Organization : UNMZCountry : Czech Republic Latest Date for Comments : 2017-02-28Project ID : 42003314/0001 Draft for public
Page 38
enquiryICS : 77.120National Ref :Title : Heavy non ferrous metals and their alloys – Compendium and examples of applicationScope : This standard is an overview of heavy non-ferrous metals and their alloys, i.e. metals with a
specific gravity greater than 5.0 g / cm3, provides labeling materials, chemical symbols and numerical indication of their composition and an overview of the various materials in product standards. The standard applies to base metals: copper, nickel, zinc, lead and tin, and their alloys.
Relatedness :National : REV/AMDČSN421300(2005)
** End of Subsector **
Subsector M05: WELDING
Subsector : M05 (Secondary Subsector)
Registration Date : 2017-01-31
Organization : UNICountry : Italy
Project ID : 01602635/0001 Project Established
ICS :23.040.20, 23.040.45, 25.160.10
National Ref : UNI1602635Title : Qualification of welders for pipes according to EN 13067 and e UNI 9737 - Guidelines for
thepreparationofthetheoreticalexamquestionnaireScope : The technical report prepares the relevant questionnaire in the evaluation process of
theoretical knowledge of those who wish to take a qualifying exam for the certificate of conformitytotheUNIEN13067.The questions and the answers proposed in this Technical Report satisfy both form (questionnaire with multiple answers) in both the arguments as specified in paragraph 5.3 of EN 13067.
Relatedness :National : New
Subsector : M05 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 09200992/0001 Project Established
ICS : 19.060National Ref : DIN 35227Title : Mechanical joining - Fatigue testing of mechanically joints
Relatedness :National : New
** End of Subsector **
Subsector M08: LIGHT ALLOYS
Subsector : M08 Registration Date : 2017-01-18
Page 39
Organization : UNMZCountry : Czech Republic Latest Date for Comments : 2017-02-28
Project ID : 42003514/0001 Draft for public enquiry
ICS : 77.120National Ref :Title : Light non ferrous metals and their alloys – Compendium and examples of applicationScope : This standard is an overview of light metals and their alloys, i.e. metals with a specific gravity
less than 5.0 g / cm3, provides designation materials, chemical symbols and numerical indication of their composition and an overview of the various materials in product standards.
Relatedness :National : REV/AMDČSN421400(2005)
** End of Subsector **
Subsector M99: UNDETERMINED
Subsector : M99 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 08201374/0001 Project Established
ICS :National Ref : 08201374Title : Inseparable elastomer sealed connectors made of metal for metallic pipes for use in
drinking water system installation - General requirements and test methods
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 40
Monthly Notifications Register
Notifications registered at CCMC from 2017-01-01 to 2017-01-31
Sector N : NON-METALLIC MATERIALS
Register issued on : 2017-02-03
Page 41Subsector N01: PAPER AND BOARD
Subsector : N01 (Secondary Subsector)
Registration Date : 2017-01-27
Organization : TSECountry : Turkey
Project ID : tst11653/0001 Project Established
ICS : 73.080, 85.040, 87.040National Ref :Title : Calcite- Used for Paper IndustryScope : This standard covers the precipite and natural calcite in paper inustry used as coating or
filling materials.
Relatedness :National : New
** End of Subsector **
Subsector N05: TEXTILES
Subsector : N05 Registration Date : 2017-01-30Organization : ISSCountry : Serbia Latest Date for Comments : 2017-03-02
Project ID : 00056929/0001 Draft for public enquiry
ICS : 59.080.01National Ref : naSRPS F.A1.012:2017Title : Textile - Resistance and water resistance testing
Relatedness :National : New
Subsector : N05 Registration Date : 2017-01-30Organization : ISSCountry : Serbia Latest Date for Comments : 2017-03-02
Project ID : 00056933/0001 Draft for public enquiry
ICS : 59.080.30National Ref : naSRPS F.S2.022:2017Title : Textiles — Determination of fabrics resistance against bursting
Relatedness :National : New
Subsector : N05 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 13202734/0001 Project Established
ICS : 59.080.50National Ref : DIN 83329Title : Ships and marine technology - Polypropylene fibre ropes made of yarns produced on
bast fibre spinning systems
Page 42
Relatedness :National : New
Subsector : N05 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : tst09500/0001 Project Established
ICS : 61.040National Ref :Title : Textiles- Handkerchief Scope : This standard specifies the description, classification and characteristics, sampling, inspection
and marketing of handkerchief
Relatedness :National : NewInternational : Modified ASTM D4153:2014
Subsector : N05 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : tst11048/0001 Project Established
ICS : 59.080.30National Ref :Title : Textiles - Bedspread fabrics - Woven, knitted or flocked Scope : This standard specifies the description, classification and characteristics, sampling, inspection
and marketing of woven, knitted or flocked bedspread fabrics
Relatedness :National : NewInternational : Modified ASTM D4037-02:2013
Subsector : N05 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : tst11156/0001 Project Established
ICS : 59.080.30National Ref :Title : Textiles - Lining fabrics - WovenScope : This standard specifies the description, classification and characteristics, sampling, inspection
and marketing of woven lining fabrics
Relatedness :National : NewInternational : Modified ASTM D3783:1995
Subsector : N05 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : tst11156/0001 Project Established
ICS : 59.080.30
Page 43
National Ref :Title : Textiles - Lining fabrics - WovenScope : This standard specifies the description, classification and characteristics, sampling, inspection
and marketing of woven lining fabrics
Relatedness :National : NewInternational : Modified ASTM D4114:2014
Subsector : N05 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : tst11266/0001 Project Established
ICS : 59.080.30National Ref :Title : Textiles - Skirt, dress, trousers and blouse fabrics for women and girls - KnittedScope : This standard specifies the description, classification and characteristics, sampling, inspection
and marketing of knitted skirt, dress, trousers and blouse fabrics for women and girls
Relatedness :National : NewInternational : Modified ASTM D4235-01:2008
** End of Subsector **
Subsector N09: PLASTICS
Subsector : N09 (Secondary Subsector)
Registration Date : 2017-01-13
Organization : TSECountry : Turkey
Project ID : t0114298/0001 Project Established
ICS : 23.040.01, 75.180.30National Ref :Title : Plastics floating floor supports – Used in closed and open areasScope : This standard covers of plastics floating floor supports of closed and open areas
Relatedness :National : New
Subsector : N09 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : t0114313/0001 Project Established
ICS : 13.340.60, 91.060.30National Ref :Title : Floors in working places and areas with slip and fall risks - General requirements and
testingScope : This standard specifies criteria on suitable floor cover selection, design of floors, and means
to be taken in working places and areas. This standard covers the floors which comes in contact with slippery materials due to occupational or operational activities and have slip and fall risk potential in working places and areas. This standard does not cover the floors which are used in dry condition and have slip and fall risk potential that does not originate
Page 44
from slippery materials.
Relatedness :National : NewEuropean : Modified DIN 51130:2014
** End of Subsector **
Subsector N14: PLASTICS PIPES
Subsector : N14 Registration Date : 2017-01-31Organization : UNICountry : Italy
Project ID : 01602635/0001 Project Established
ICS :23.040.20, 23.040.45, 25.160.10
National Ref : UNI1602635Title : Qualification of welders for pipes according to EN 13067 and e UNI 9737 - Guidelines for
thepreparationofthetheoreticalexamquestionnaireScope : The technical report prepares the relevant questionnaire in the evaluation process of
theoretical knowledge of those who wish to take a qualifying exam for the certificate of conformitytotheUNIEN13067.The questions and the answers proposed in this Technical Report satisfy both form (questionnaire with multiple answers) in both the arguments as specified in paragraph 5.3 of EN 13067.
Relatedness :National : New
Subsector : N14 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : t0114298/0001 Project Established
ICS : 23.040.01, 75.180.30National Ref :Title : Plastics floating floor supports – Used in closed and open areasScope : This standard covers of plastics floating floor supports of closed and open areas
Relatedness :National : New
Subsector : N14 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : t0116259/0001 Project Established
ICS : 23.040.01, 55.080National Ref :Title : Medical waste collection bag - Polyethylene (Pe)Scope : This standard covers general specification and test methods of bags made from plastic
sheets for using pre-collection, collection of medical waste or collection of special medical waste.
Page 45
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 46
Monthly Notifications Register
Notifications registered at CCMC from 2017-01-01 to 2017-01-31
Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT
Register issued on : 2017-02-03
Page 47Subsector S01: ACOUSTICS AND SOUND INSULATION
Subsector : S01 Registration Date : 2017-01-09Organization : SNCountry : Norway
Project ID : NOT17007/0001 Published Standard
ICS : 91.120.20National Ref : NS 8178Title : Acoustic criteria for rooms and spaces for music rehearsal and performanceScope : This standard specifies differentiated criteria for acoustic conditions and characteristics for
spaces used for music rehearsal and performance. The criteria are specified for different types of music, regardless of the type of building in which the spaces are located. The standard provides criteria for room acoustics in spaces used for music rehearsal and performance, whether this is the primary use of the spaces or they are multi-purpose spaces. Together with the acoustic criteria, requirements are also given for room height, net room volume and net area. Criteria for acoustic conditions are differentiated on the basis of three music types: amplified music, quiet music and loud music.
Relatedness :National : New
** End of Subsector **
Subsector S09: WATER QUALITY AND WATER SUPPLY
Subsector : S09 Registration Date : 2017-01-13Organization : TSECountry : Turkey
Project ID : tst12587/0001 Project Established
ICS : 45.060.20National Ref :Title : Railway Vehicles-Power Supply Installations For PassengerScope : This standard, covers general prousions with which the coaches power supply installations
must comply and specific definations for components which standardisation is sought.
Relatedness :National : New
** End of Subsector **
Subsector S15: SURGICAL INSTRUMENTS
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702883/0001 Project Established
ICS :National Ref : 02702883Title : Medical instruments - Needle holder type Masson
Relatedness :National : New
Page 48
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702884/0001 Project Established
ICS :National Ref : 02702884Title : Medical instruments - Ligature needle type Deschamps
Relatedness :National : New
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702887/0001 Project Established
ICS :National Ref : 02702887Title : Medical instruments - Needle holder type Crile-Wood - Part 1: Without carbide inserts
Relatedness :National : New
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702888/0001 Project Established
ICS :National Ref : 02702888Title : Medical instruments - Needle holder type Crile-Wood - Part 2: With carbide inserts
Relatedness :National : New
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702890/0001 Project Established
ICS :National Ref : 02702890Title : Medical instruments - Forceps type Adson
Relatedness :National : New
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : GermanyProject ID : 02702891/0001 Project
Page 49
EstablishedICS :National Ref : 02702891Title : Medical instruments - Retractor type Kocher
Relatedness :National : New
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702892/0001 Project Established
ICS :National Ref : 02702892Title : Medical instruments - Retractor type Körte
Relatedness :National : New
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702893/0001 Project Established
ICS :National Ref : 02702893Title : Medical instruments - Retractor type Langenbeck
Relatedness :National : New
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702894/0001 Project Established
ICS :National Ref : 02702894Title : Medical instruments - Abdominal and liver retractor type Mikulicz, blade curred
Relatedness :National : New
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702897/0001 Project Established
ICS :National Ref : 02702897Title : Medical instruments - Lid retractor type Desmarres
Page 50
Relatedness :National : New
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702898/0001 Project Established
ICS :National Ref : 02702898Title : Medical instruments - Retractor type Volkmann
Relatedness :National : New
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702901/0001 Project Established
ICS :National Ref : 02702901Title : Medical instruments - Retractors type Cushing
Relatedness :National : New
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702905/0001 Project Established
ICS :National Ref : 02702905Title : Medical instruments - Ear specula type Hartmann
Relatedness :National : New
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702910/0001 Project Established
ICS :National Ref : 02702910Title : Medical instruments - Bone levers type Hohmann
Relatedness :National : New
Page 51
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702918/0001 Project Established
ICS :National Ref : 02702918Title : Medical instruments - Osteotomes type Lexer
Relatedness :National : New
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702919/0001 Project Established
ICS :National Ref : 02702919Title : Medical instruments - Osteotomes type Lambotte
Relatedness :National : New
Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 02702926/0001 Project Established
ICS :National Ref : 02702926Title : Medical instruments - Self-retaining retractor type Beckmann-Adson
Relatedness :National : New
** End of Subsector **
Subsector S19: FIRST AID EQUIPMENT AND RESCUE SYSTEMS
Subsector : S19 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 06301831/0001 Project Established
ICS :National Ref : 06301831Title : Surgical dressings - Surgical sheets
Relatedness :National : New
Subsector : S19 Registration Date : 2017-01-16
Page 52
Organization : DINCountry : Germany
Project ID : 06301832/0001 Project Established
ICS :National Ref : 06301832Title : First aid material - First-aid box for fire-brigade motor cars
Relatedness :National : New
** End of Subsector **
Subsector S20: WASTE COLLECTION, HANDLING AND TRANSPORTATION
Subsector : S20 Registration Date : 2017-01-09Organization : SNCountry : Norway
Project ID : NOT17008/0001 Published Standard
ICS : 13.030.10National Ref : NS 9432Title : Waste - Planning of renovation and execution of collection - Requirements and
recommendationsScope : This standard specifies solutions for waste collection
Relatedness :National : New
Subsector : S20 (Secondary Subsector)
Registration Date : 2017-01-13
Organization : TSECountry : Turkey
Project ID : t0116259/0001 Project Established
ICS : 23.040.01, 55.080National Ref :Title : Medical waste collection bag - Polyethylene (Pe)Scope : This standard covers general specification and test methods of bags made from plastic
sheets for using pre-collection, collection of medical waste or collection of special medical waste.
Relatedness :National : New
** End of Subsector **
Subsector S24: SOIL QUALITY
Subsector : S24 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 11903900/0001 Project Established
ICS : 13.080.99
Page 53
National Ref : DIN 19740-1Title : Soil quality - Environmental requirements for the construction and operation of civil
shooting ranges - Part 1: Principles and technical requirements
Relatedness :National : New
Subsector : S24 Registration Date : 2017-01-24Organization : PKNCountry : Poland
Project ID : 19001120/0001 Project Established
ICS : 13.080.01National Ref : prPN-Z-19005Title : Soil quality -- Assessment of the soil sanitary conditions -- Detection and quantitative
determination of eggs of the intestinal parasites from species Ascaris, Trichuris and Toxocara in dehydrated sewage sudge
Scope : This Standard specifies a method for detection and quantitative determination of eggs of the intestinal parasites from species Ascaris, Trichuris and Toxocara in dehydrated sewage sludge. This method is applicable for detection of eggs of intestinal parasites and determnination of quantity of viable eggs of these intestinal parasites of the species listed above per 1 kg of dry matter of the dehydrated sewage sludge, which allows for their parasitological assessment.
Relatedness :National : New
** End of Subsector **
Subsector S99: UNDETERMINED
Subsector : S99 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 08000294/0001 Project Established
ICS :National Ref : 08000294Title : Nuclear medicine departments - Part 1: Rules for the construction and equipping of
facilities for ambulatory use of unsealed radioactive materials for diagnosis and treatment
Relatedness :National : New
Subsector : S99 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 08000295/0001 Project Established
ICS :National Ref : 08000295Title : Nuclear medicine departments - Part 2: Rules for the construction and equipment of
departments for the therapeutic use of unsealed radioactive substances
Relatedness :
Page 54
National : New
Subsector : S99 Registration Date : 2017-01-20Organization : SISCountry : Sweden Latest Date for Comments : 2017-03-20
Project ID : 08760120/0002 Project Established
ICS : 11.140National Ref : 8760120Title : Health care textiles - Trousers for staffScope : This standard covers requirements and design specification for personnel trousers, designed
as a working garment for staff in health care. The garment is designed to fit both men and women.
Relatedness :National : New
Subsector : S99 Registration Date : 2017-01-20Organization : SISCountry : Sweden Latest Date for Comments : 2017-03-20
Project ID : 08760121/0001 Project Established
ICS : 11.140National Ref : 8760121Title : Health care textiles - Blouse for staffScope : This standard covers requirements and design specification for personnel blouse, designed
as a working garment for staff in health care. The garment is designed to fit both men and women.
Relatedness :National : New
Subsector : S99 Registration Date : 2017-01-09Organization : SNCountry : Norway
Project ID : NOT17002/0001 Published Standard
ICS : 11.140National Ref : NS 3342Title : Health service - Unisex coatScope : The standard gives requirement for Unisex coat. The design is equal for females and males.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 55
Monthly Notifications Register
Notifications registered at CCMC from 2017-01-01 to 2017-01-31
Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING
Register issued on : 2017-02-03
Page 56Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES
Subsector : T01 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 13202661/0001 Project Established
ICS : 47.020.10National Ref : DIN 83104Title : Dogs for heavy-duty doors on ships and for hatch covers
Relatedness :National : New
Subsector : T01 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 13202662/0001 Project Established
ICS : 47.020.10National Ref : DIN 83417Title : Rope hatches - Nominal size 300
Relatedness :National : New
Subsector : T01 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 13202663/0001 Project Established
ICS : 47.020.40National Ref : DIN 83418Title : Guide pulley for rope hatches
Relatedness :National : New
Subsector : T01 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 13202664/0001 Project Established
ICS : 21.140National Ref : DIN 83419Title : Elastomer gaskets for covers
Relatedness :National : New
Subsector : T01 Registration Date : 2017-01-16Organization : DIN
Page 57
Country : Germany
Project ID : 13202792/0001 Project Established
ICS : 23.060.10National Ref : DIN 86251Title : Shut-off valves for shipboard use, of cast iron, with flanges, DN 15 to DN 500
Relatedness :National : New
Subsector : T01 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 13202794/0001 Project Established
ICS : 23.060.50National Ref : DIN 86252Title : Non-return valves for shipboard use, cut-off type, of cast iron, with flanges, DN 15 to DN
500
Relatedness :National : New
Subsector : T01 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 13202873/0001 Project Established
ICS :National Ref : 13202873Title : Closing devices (fasteners) and fork plates for ship's equipment
Relatedness :National : New
Subsector : T01 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 13202883/0001 Project Established
ICS :National Ref : 13202883Title : Elastomer mounts - Technical specification
Relatedness :National : New
** End of Subsector **
Subsector T02: AEROSPACE
Subsector : T02 Registration Date : 2017-01-16Organization : DIN
Page 58
Country : Germany
Project ID : 13115763/0001 Project Established
ICS :National Ref : 13115763Title : Aerospace Series - Methods for inspection of metallic components, produced with
additive powderbed fusion processes
Relatedness :National : New
Subsector : T02 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 13115776/0001 Project Established
ICS :National Ref : 13115776Title : Aerospace series - Technical Specifications for additive manufacturing of metallic
materials with the powder bed process
Relatedness :National : New
Subsector : T02 Registration Date : 2017-01-16Organization : DINCountry : Germany
Project ID : 13115809/0001 Project Established
ICS :National Ref : 13115809Title : Aerospace - Test methods for surface protection; Paints and varnishes - Part 6: Chemical
and electroplated coatings
Relatedness :National : New
** End of Subsector **
Subsector T16: LIFTS & ESCALATORS
Subsector : T16 Registration Date : 2017-01-20Organization : ASICountry : Austria
Project ID : 00027056/0001 Project Established
ICS : 91.140.90National Ref : ÖNORM B 2450-2Title : Lifts, escalators and passenger conveyors - Part 2: Risk assessment for liftsScope : This ÖNORM describes each one possible procedure for the risk assessment for additional
risks for lifts with openings in their shafts, for the construction operation and for landings with limited access (e.g. landings to penthouse), and can be used for the development of risk assessments for the complete lift, necessary according to ASV 2015, Attachment I (Anlage I) in conjunction with ÖNORM EN ISO 14798.
Page 59
Relatedness :National : New
Subsector : T16 Registration Date : 2017-01-09Organization : SNCountry : Norway
Project ID : NOT17005/0001 Draft for public enquiry
ICS : 91.140.90National Ref : NS 3808Title : Existing lifts, lifting platforms, escalators and moving walks - Improvements of safetyScope : The standard defines measures when rebuilding existing lifts, lifting platforms, escalators and
moving walks to improve safety
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 60
Monthly Notifications Register
Notifications registered at CCMC from 2017-01-01 to 2017-01-31
Sector Z : INFORMATION TECHNOLOGY
Register issued on : 2017-02-03
Page 61Subsector Z99: UNDETERMINED
Subsector : Z99 Registration Date : 2017-01-31Organization : UNICountry : Italy
Project ID : 01602663/0001 Project Established
ICS : 35.020National Ref : UNI1602663Title : Unregulated professional activities - ICT professional profiles - Part 1: Methodology for
the construction of professional profiles based on the e-CF system Scope : The present proposal aims to standardize the construction of professional profiles based on
the e-CF system and the related generation 2 and 3 profiles, in order to ease up and harmonize their use in various operational contexts which may differ with regards to technologyandapplicationaspects.The standard proposal takes as a main reference what already defined in the CWA 16458, completing and contextualizing it to the national market.
Relatedness :National : REV/AMD UNI 11621-1:2016
Subsector : Z99 Registration Date : 2017-01-31Organization : UNICountry : Italy
Project ID : 01602664/0001 Project Established
ICS : 35.020National Ref : UNI1602664Title : Unregulated professional activities - ICT professional profiles - Part 2: “Second
generation” professional profilesScope : The present proposal aims to define the main second generation ICT professional profiles,
taking what is defined in the CWA 16458 as a reference model to be expanded and contextualized to the national environment.
Relatedness :National : REV/AMD UNI 11621-2:2016
Subsector : Z99 Registration Date : 2017-01-31Organization : UNICountry : Italy
Project ID : 01602665/0001 Project Established
ICS : 35.020National Ref : UNI1602665Title : Unregulated professional activities - ICT professional profiles - Part 3: Web profession
professional profilesScope : The present standardization proposal aims to use the tools provided by the related part 1
“Methodology for the construction of professional profiles based on the e-CF system” in order to define third generation professional profiles related with web profession.
Relatedness :National : REV/AMD UNI 11621-3:2016
Subsector : Z99 Registration Date : 2017-01-31
Page 62
Organization : UNICountry : Italy
Project ID : 01602666/0001 Project Established
ICS : 35.020National Ref : UNI1602666Title : Unregulated professional activities - ICT professional profiles - Part 4: Information
security professional profilesScope : The present standardization proposal aims to use the tools provided by the related part 1
“Methodology for the construction of professional profiles based on the e-CF system” in order to define third generation professional profiles related with information security.
Relatedness :National : REV/AMD UNI 11621-4:2016
** End of Subsector **
** End of Sector **
2011-06
List of non-electrotechnical subsectors
Sector A: Services
Subsector Title ISO/TC CEN/TC
reference reference
A01 Tourist services / 329; CEN/WS ETO
A02 Cleaning services / 328
A03 Postal services / 331
A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM
A05 Maintenance services / 319
A06 Building and construction services / 330
A07 Translation services /
A08 Funeral services / CEN/BT/TF 139
A09 Facility management / 348
A10 Services of Real Estate Agents / CEN/BT/TF 180; 373
A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4
A12 Consultancy Services / 395; 381
A13 Expertise Services / 405
A14 Aesthetic Services / 403;409
A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404
Sector B: Building and construction
Subsector Title ISO/TC CEN/TC
reference reference
B01 Fire protection 21 70; 72; 191; 192
B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340
B03 Concrete 71 104; CEN/WS 009
B04 Cement 74; 77 51
B05 Fire tests 92 127
B06 Gypsum / 241
B07 Glass 160 129
B08 Doors and windows 162 33
B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036
B10 Timber structures 165 124
B11 Metal structures 167 135
B12 Masonry 179; 196 125; 246
B13 Solar energy 180 312
B14 Geotechnics 182 341; 396
B15 Sanitary appliances / 163; 7
B16 Taps / /
B17 Lighting equipment and lighting / 50; 169 application technology
B18 Scaffolding / 53
B19 Ceramic tiles 189 67
B20 Drainage equipment / 165
B21 Baths / /
B22 Wallcoverings / 99
B23 District heating / 107
B24 Auxiliary and handicraft work / /
B25 Gas distribution installation and / 234; 235; 282 related equipment
B26 Road building and maintenance / 178; 227
B27 Waterproofing materials / 128; 254; 361; 314
B28 Floor coverings 38/SC 12 134
B29 Aggregates / 154
B30 Floor and surfacing / 217; 303; 323; 390
B31 Heating systems in buildings / 228; 247
B32 Precast concrete products / 177; 229
B33 Building design 205 315; 325; 388
B34 Building and construction – Environmental aspect 350; 351
B99 Undetermined / /
Sector C: Chemicals, chemical engineering and food products
Subsector Title ISO/TC CEN/TC
reference reference
C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054
C02 Paints and related products 35 139; 298; 173
C03 Chemistry 47 317; 363
C04 Laboratory glassware 48 332
C05 Lac / /
C06 Essential oils 54 /
C08 Pesticides 81 /
C09 Surfactants 91 276
C10 Starch 93 /
C11 Tobacco 126 401
C12 Glass plant / /
C13 Fertilizers 134 223; 260
C16 Wood preservatives / /
C17 Trees and plants / /
C18 Adhesives / 193
C19 Chemical analysis 201; 202 382; 347
C20 Explosives and firework / 212; 321
C21 Cosmetics 217 392
C22 Bio-Based products / 411
C99 Undetermined / 386
Sector F: Fundamental standards
Subsector Title ISO/TC CEN/TC
reference reference
F01 Technical drawings 10 /
F02 Units & symbols 12 /
F03 Preferred numbers 19 /
F04 Sieves 24 /
F05 Measuring instruments 30; 113 92; 171; 176; 237;
294; 318; 244; 367; 141; CEN/WS 011
F06 Terminology principles 37 /
F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368
F08 Surfaces / 290
F09 Banking 68 /
F10 Statistics 69 /
F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365
F13 Environmental tests / /
F14 Graphical technology, 130 / sign-boards and nameplates
F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033
F16 Graphical symbols 145 /
F17 Administrative documents 154 CEN/WS MMU
F18 Micrographics 171 /
F19 Optics 172; 187 123; 170
F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362
F21 Value analysis and project / 279 network
F22 Logistics / 379; 273
F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;
CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027
F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060
Sector H: Products for household and leisure use
Subsector Title ISO/TC CEN/TC
reference reference
H01 Cinematography 36 372
H02 Photography 42 /
H03 Consumer questions / 291
H04 Sports equipment 83 136
H05 Oil and gas burners / 47; 131
H06 Horology 114 /
H07 Space heating 116 62; 110; 130; 179; 180
H08 Sizing systems 133; 137 /
H09 Furniture 136 207
H10 Sewing machines 148 /
H11 Heater controls 161 58
H12 Ceramic and glass-ware for food 166 /
H13 Jewellery 174 CEN/WS 047
H14 Caravans 177 245
H15 Toys 181 52
H17 Oil stoves / 46
H18 Central heating boilers / 48; 57; 109; 269
H19 Non-electric cookers and barbecues / 49; 281; 295
H22 Smokers’ lighters and matches / 355; 87
H23 Ladders / 93
H24 Tactile danger warnings / /
H25 Large gas appliances / 106; CEN/CLC/JWG FCGA
H26 Sealing materials / 108; 208
H27 Educational equipment / /
H28 Hunting 191 /
H29 Heat pumps / 113
H30 Equipment for children / 252
H31 Dedicated LPG appliances / 181
H32 Culinary utensils 186 194
H33 Footwear (excluding protective / 309 footwear)
H34 Child safety / CEN/BT/WG 117 398
H99 Undetermined / 299; 364; 369; 402
Sector I: Mechanical engineering
Subsector Title ISO/TC CEN/TC
reference reference
I01 Screw threads 1 /
I02 Fasteners 2 185
I03 Limits & fits / /
I04 Rolling bearings 4 /
I05 Iron pipes 5 203
I06 Pressure vessels 11 54
I07 Shafts 14 /
I08 Agricultural machines 23 144, 334
I09 Small tools 29 213
I10 Splines / /
I11 Machine tools 39 142; 143; 145; 255
I12 Pulleys & belts 41 188
I13 Gas containers 58 23; 286
I14 Gears 60 /
I15 Equipment for petroleum industry 67 12
I16 Internal combustion engines 70; 192 270
I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025
I18 Mining 82 196
I19 Nuclear energy 85 /
I20 Refrigeration 86 44; 182
I21 Chains and chain wheels 100 /
I22 Vacuum technology 112 /
I23 Pumps 115 197
I24 Industrial fans 117 356
I25 Compressors 118 232
I26 Plain bearings 123 /
I27 Earth moving and construction 127; 195 151 equipment
I28 Fluid power 131 /
I29 Gas cleaning / 195
I30 Air distribution / 156
I31 Valves 153; 185 69; 236; 105
I32 Flanges / 74
I33 Information processing in 184 310 automation
I34 Non-ferrous metallic pipes / /
I35 Leisure and recreational machines / 152
I36 Thermoprocessing technology / 186
I37 Printing and paper machines / 198
I38 Leather production, tannery and / 200; 201 related machinery
I39 Machines for metal processing / 202; 322
I40 Industrial piping networks / 267
I41 Membrane filters / 272
I42 Potentially explosive atmospheres / 305
I43 Hydrogen energy 197 /
I44 Nanotechnologies 229 352
I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059
Sector M: Metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110
M02 Zinc / 209
M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron
M04 Copper 26 133
M05 Welding 44 121
M06 Dimensions of wrought products / /
M07 Manganese and chromium 65 /
M08 Light alloys 79 132
M09 Iron ores 102 /
M10 Metallic coatings 107 240
M11 Powder metallurgy 119 /
M12 Aluminium ores 129 /
M13 Ferroalloys 132 /
M14 Nickel 155 /
M15 Metallic corrosion 156 262; 219
M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101
M17 Heavy metal ores 183 /
M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407
M20 Tin and tin alloys / 220
M21 Precious metals / 283
M22 Lead and lead alloys / 306
M99 Undetermined / /
Sector N: Non-metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
N01 Paper and board 6 172
N02 Solid fuels 27 335; 343;383; CEN/WS 019
N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061
N04 Refractories 33 187
N05 Textiles 38 189; 248
N06 Rubber 45 218; 366 CEN/WS 003
N07 Sawn timber 55 38; 175
N08 Mica / /
N09 Plastics 61 249
N10 Cork 87 /
N11 Wood-based panels 89 112
N12 Timber products 99 /
N13 Leather 120 289
N14 Plastics pipes 138 155
N17 Fluorspar 175 /
N18 Glass-fibre reinforced plastics / /
N19 Tapes / 253
N20 Ceramics 206 184
N21 Gaseous fuels and combustible gas 158; 193 238; 408
N22 Feather and related materials / 222
N23 Diamond / 410
N99 Undetermined / /
Sector S: Health, environment and medical equipment
Subsector Title ISO/TC CEN/TC
reference reference
S01 Acoustics and sound 43 126; 211 insulation
S02 Transfusion equipment 76 /
S03 Syringes 84 /
S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043
S05 Dentistry 106 55
S06 Vibration & shock 108 231
S07 Anaesthetic and respiratory 121 215 equipment
S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI
S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034
S10 Surgical implants 150 285; CEN/CLC/JWG AIMD
S11 Contraceptives 157 /
S12 Gas analysis / /
S13 Ergonomics 159 122
S14 Prosthetics 168 /
S15 Surgical instruments 170 /
S16 Aids for the disabled 173 293
S17 Respiratory protective devices / 79
S18 Sterilization of equipment 198 102; 204
S19 First aid equipment and rescue systems / 239
S20 Waste collection, handling and / 183 transportation
S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055
S22 Energy saving / CEN/WS 005 CEN/WS 015
S23 Personal & property protection against aggression/Burglary protection / 263
S24 Soil quality 190 345; CEN/WS 032
S25 Chemical disinfectants and / 216 antiseptics
S26 Environmental management 207 CEN/TC 406; CEN/WS 040
S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120
S28 Demining / CEN/WS 029 CEN/WS 013
S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020
Sector T: Transport, mechanical handling and packaging
Subsector Title ISO/TC CEN/TC
reference reference
T01 Shipbuilding and maritime 8; 188 15; 300 structures
T02 Aerospace 20 274; AECMA; ECSS ;377
T03 Road vehicles 22 301; 326 CEN/WS IMA
T04 Tyres 31 /
T05 Pallets 51 /
T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393
T07 Glass containers 63 /
T08 Cranes 96 147
T09 Materials handling and 101 148; 149 storage equipment
T10 Freight containers 104 119; 280
T11 Steel wire ropes 105 /
T12 Industrial trucks 110 150; 324
T13 Lifting chains, hooks and ropes 111 168
T14 Packaging 122 261; 120
T15 Cycles 149 333
T16 Lifts & escalators 178 10; 242
T17 Builders hoists / /
T18 Elevating platforms / 98
T19 Road safety / 226; 339
T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR
T21 Packaging machines / 146
T22 Off-road vehicles / 354
T99 Undetermined / CEN/WS TAF
Sector Z: Information technology
Subsector Title ISO/TC CEN/TC
Z01 Radiocommunication for IT / /
Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI
Z03 Common O.S.I. activities / CEN/CLC - EWOS
Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;
CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR
Recommended