Information procedure - unms.sk · Information procedure Page 1 Monthly Notifications Register ... UNI Country : Italy Project ID : 01602483/0001 Project Established ... the EN 15193

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2017-01-01 to 2017-01-31

Register issued on : 2017-02-03

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Page 3Subsector A05: MAINTENANCE SERVICES

Subsector : A05 Registration Date : 2017-01-13Organization : TSECountry : Turkey

Project ID : t0114335/0001 Project Established

ICS :03.080.30, 03.080.30, 23.140

National Ref :Title : Competent services – Blowers – RulesScope : This standard includes rules for operating, structural feature, technical equipment, personnel

specifications and certification of competent services of blowers.

Relatedness :National : New



ICS :03.080.30, 03.080.30, 43.060.10

National Ref :Title : Competent services – Engine Overhaul Machines – RulesScope : This standard includes rules for operating, structural feature, technical equipment, personnel

specifications and certification of competent services of Engine Overhaul Machines.




ICS :03.080.30, 03.080.30, 75.200

National Ref :Title : Competent services – Natural Gas Regulation Stations – RulesScope : This standard includes rules for operating, structural feature, technical equipment, personnel

specifications and certification of competent services of natural gas regulation stations.


** End of Subsector **

Subsector A06: BUILDING AND CONSTRUCTION SERVICES

Subsector : A06 Registration Date : 2017-01-09Organization : SNCountry : Norway

Page 4

Project ID : NOT17006/0001 Published Standard

ICS : 27.010National Ref : NS 6430Title : General conditions of contract for energy performance contracting (EPC)Scope : The standard defines general conditions for energy performance contracting (EPC) for

engergy savings




ICS : 91.010.20National Ref : NS 8404Title : General conditions of contract for independent control commissionsScope : The standard specifies general conditions of contract for independent control commissions



Subsector A09: FACILITY MANAGEMENT


Project ID : NOT17015/0001 Project Established

ICS : 91.040.01National Ref : NS 6422Title : Workplace environment - Process specificationScope : This document provides a process guidance for establishing workplace environment of office

solutions. This document does not include workplace design for manufacturing and other production



Subsector A11: SAFETY AND SECURITY



ICS : 03.100.01National Ref : NS 5831Title : Societal security - Protection against intentional undesirable actions - Requirements for

Page 5

security risk managementScope : Requirements for security risk prosedures and management in the built environment and

protection against intentional undesirable actions




ICS : 03.100.01National Ref : NS 5832Title : Societal security - Protection against intentional undesirable actions - Requirements for

security risk analysisScope : Requirements and method for security risk analysis




ICS : 03.080.30National Ref :Title : Work Places-Foodstuffs transport services-General rulesScope : This standard includes, general rules for management, transport vehicles characteristics,

foodstuffs transport serulces work places and personnel characteristics of raw, semi-product, food product material, food product additives, reserved for processing by-product and food pockages of work places – food stuffs transport services.



Project ID : tst12831/0002 Project Established

ICS : 03.080.30, 29.130.01National Ref :Title : Authorised services - Rules for switching and control equipmentsScope : This standard includes rules for management, structural features, technical equipment,

personnel specifications and certification of authorised services of switching and control Equipments.


Page 6



ICS :03.080.30, 23.020.10, 83.140.10

National Ref :Title : Competent services – Stationary tanks, hydrophores and expansion tanks - RulesScope : This standard includes rules for operating, structural feature, technical equipment, personnel

specifications and certification of competent services of stationary tanks, hydrophores and expansion tanks




ICS : 03.080.30, 67.260National Ref :Title : Competent services - Rules for milling machinesScope : This standard includes rules for operating, structural feature, technical equipment, personnel

specifications and certification of competent services of milling machines.




ICS : 03.080.30, 29.200National Ref :Title : Authorised services – Rules for voltage regulatorsScope : This standard includes microprocessor controlled voltage regulators competent authorized

services’ rules about technical equipment, operation management, structural situation and functions of staff.




ICS : 03.080.30, 33.040.99National Ref :

Page 7

Title : Authorised services - Rules for satellite based positioning (GPS) and/or navigation equipments

Scope : This standard includes satellite based positioning equipments authorised services rules about technical equipment, operation management, structural situation and functions of staff.



Subsector A99: UNDETERMINED


Project ID : NOT17001/0001 Draft for public enquiry

ICS : 03.080.01National Ref : NS 8437Title : General conditions of contract for healthcare services at homeScope : This Standard regulates the general conditions of contract regarding healthcare services at

home between the municipality as a contracting entity and the supplier of healthcare services. In this context the healthcare services includes treatment, rehabilitation and interdisciplinary cooperation also related to practical help with daily life’s different tasks.


Subsector : A99 (Secondary Subsector)

Registration Date : 2017-01-13

Organization : TSECountry : Turkey


ICS :03.080.30, 23.020.10, 83.140.10

National Ref :Title : Competent services – Stationary tanks, hydrophores and expansion tanks - RulesScope : This standard includes rules for operating, structural feature, technical equipment, personnel

specifications and certification of competent services of stationary tanks, hydrophores and expansion tanks



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Page 9Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2017-01-16Organization : DINCountry : Germany

Project ID : 03101113/0001 Project Established

ICS :National Ref : 03101113Title : Firefighting and fire protection - Terms; Amendment A2


Subsector : B01 Registration Date : 2017-01-09Organization : SNCountry : Norway


ICS : 13.220.20National Ref : NS 3960Title : Fire detection and fire alarm systems - Design, installation, operation and maintenanceScope : The standard specifies design, installation, operation and maintenance for fire detection and

fire alarm systems



Subsector B02: STRUCTURES



ICS :National Ref : 00517914Title : Masonry - Part 4: Prefabricated masonry compound units


Subsector : B02 Registration Date : 2017-01-05Organization : UNMZ Draft Issue Date : 2017-01-04Country : Czech Republic Latest Date for Comments : 2017-01-30


ICS :National Ref :Title : Fibre-reinforced concrete – Testing of fresh fibre-reinforced concreteScope : The aim of the modification is unification of the standard according to the other standards.

Relatedness :

Page 10

National : REV/AMD CSN P 73 2451 (2015)



ICS :National Ref :Title :

Amelioration–IrrigationrequirementScope : This standard applies to the determination of the needs of irrigation water in the design and

assessment of structures and facilities of any management supplemental irrigation and irrigation management operation.

Relatedness :National : REV/AMD CSN 75 0434 (1994)


Subsector B03: CONCRETE



ICS : 91.080.40National Ref : NS 3511Title : Measurement of the relative humidity (RH) in concreteScope : The standard gives requirement for the method for measurement of the relative humidity

(RH) in concrete



Subsector B07: GLASS

Subsector : B07 Registration Date : 2017-01-05Organization : NENCountry : Netherlands


ICS : 65.040.30, 81.040.20National Ref : NEN 2675:2016 nlTitle : Greenhouse glass - Determination of the light transmittanceScope : NEN 2675 gives measurement methods for the determination of the transmission and light

diffusion of sun light greenhouse and screen materials.



Page 11Subsector B09: THERMAL MATTERS

Subsector : B09 Registration Date : 2017-01-19Organization : SNV Draft Issue Date : 2017-01-17Country : Switzerland Latest Date for Comments : 2017-03-29

Project ID : CH170001/0001 Draft for public enquiry

ICS : 91.120.10National Ref : prSIA 279Title : Heat-insulating construction materials

Relatedness :National : REV/AMD SIA 279:2011


Subsector B10: TIMBER STRUCTURES



ICS : 79.040National Ref : NS 3512Title : Measurement of moisture in timber structuresScope : The standard gives requirement for the method for measurement of moisture in timber

structures



Subsector B12: MASONRY



ICS : 91.100.25National Ref : DIN 105-4Title : Clay bricks - Part 4: Ceramic bricks




ICS :National Ref : 00517916

Page 12

Title : Site made masonry mortars



Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY

Subsector : B17 Registration Date : 2017-01-31Organization : UNICountry : Italy


ICS : 91.120.10, 91.160.01National Ref : UNI1602483Title : Light and lighting - Computerized calculation tool for determining the LENI according to

the EN 15193 comprehensive methodScope : The technical report will be help the calculation the LENI using the comprehensive method

calculation provided by the EN 15193-1 and a specially written software program. The goal of this tool is to help the use of the LENI software. The software has a graphical interface that allows,step-by-step,theguidedinputofthedatarequired.LENI is calculated for one room, one floor and/on one building. The scope will be for non-residentialbuildingsasprescribedbytheEN15193-1.




ICS :National Ref :Title : Daylighting in buildings – Part 1: Basic RequierementsScope : The aim of the modification is unification of the standard according to the other standards.

Relatedness :National : REV/AMD CSN73 0580-1 (2007)


Subsector B18: SCAFFOLDING



ICS :National Ref : 00517920Title : Mechanical security equipment - Part 1: Burglar resistant products for port installation for

windows and doors - Requirements and test methods

Relatedness :

Page 13

National : New


Subsector B20: DRAINAGE EQUIPMENT



ICS :National Ref : 11904175Title : Dirt trap for manhole covers




ICS :National Ref : 11904176Title : Sewage Fittings - Technical specifications for delivery for fittings from cast iron, concrete

and concrete in connection with cast iron




ICS :National Ref : 11904177Title : Concrete elements and buckets for gullies - Class A and class B - Concrete elements




ICS :National Ref : 11904178Title : Concrete elements and buckets for gullies - Classes A and B - Buckets

Relatedness :

Page 14

National : New



ICS :National Ref : 11904179Title : Concrete elements and buckets for road gullies - Part 3: Concrete elements



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2017-01-31Organization : UNICountry : Italy


ICS : 91.140.40National Ref : UNI1602593Title : Gasmeasuringsystems–Hourlygasmeasuringdevices

Meteringtelemanagement-SafeUseofintegratedcontrolledremotelyvalveScope : This technical report identifies the temporary instruction for the use of the integrated

electrovalve in the smart meter G4 and G6; this technical report also defines tests to be carried out on smart meter in order to collect homogeneous and comparable data to verify the reliability of electrovalve over time.



Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2017-01-20Organization : SFS Draft Issue Date : 2016-11-09Country : Finland Latest Date for Comments : 2017-01-10

Project ID : 0000E385/0001 Draft for public enquiry

ICS :National Ref :Title : The periodic safety inspections on power operated doors and gates


Subsector : B99 Registration Date : 2017-01-20Organization : ASICountry : Austria

Page 15


ICS : 91.100.50National Ref : ÖNORM B 3661Title : Flexible sheets for waterproofing - Underlays for discontinuous roofing - National

implementation of ÖNORM EN 13859-1Scope : This standard is used for the implementation of ÖNORM EN 13859-1. The present document

determines in clause 5 the minimum technical requirements for flexible sheets for waterproofing as underlays for discontinuous roofing in terms of basic usability in Austria. The specific requirements for bitumen and plastic sheets that come in Austria for the application are in clause 6 and clause 7.


Subsector : B99 Registration Date : 2017-01-20Organization : ASICountry : Austria


ICS : 91.010.99National Ref : ÖNORM B 3114Title : Construction and testing of burial sites and monumentsScope : This Austrian Standard includes technical requirements for construction and testing of burial

sites and new constructed monuments.




ICS : 91.010.30National Ref : NS 3457-3Title : Classification of construction works - Part 3: Building typesScope : The standard specifies classification of building types




ICS : 65.150National Ref : NS 9616Title : Landbased aquaculture farms for fish - Requirements for risk analyses, design,

execution, operation, user handbook and product data sheetScope : The standard specifies requirements for risk analyses, design, execution, operation, user

handbook and product data sheet for landbased aquaculture farms for fish

Page 16



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Page 18Subsector C01: Food products

Subsector : C01 Registration Date : 2017-01-31Organization : UNICountry : Italy


ICS : 67.250National Ref : UNI1602531Title : Metallic closures in contact with foodsuffs – Determination of Polyadipates (PAD) having

molecular weight lower than 1000 Da in vegetal oil (D2) food simulantScope : This standard is related to a methodology that make use of liquid chromatography mass

spectrometry (LC-MS) in order to determinate the specific migration of polyadipates (PAD) with molecular weight lower than 1000 Da in vegetal oil D2 food simulant from metallic closures. The LC-MS method is suitable for the quantitative determination of PAD from the LoQ to 300 mg/kg food simulant, according to the explained test conditions. For the determination, PAD analytical standards from the producers or from the users are required. In order to cover the potential difficulties in finding the standards and the information concerning their molecular weights (essential data for the determination of the results), three other approaches are proposed as alternatives. The first one is based on the co-definition between the involved parts of a percentage relate to molecular weights distribution <1000 Da; the second one suggest the determination of this value according to UNI CEN/TS 14577; the third is based onto gaschromatography mass spectrometry (GC-MS; however, for this method, no validation and precision data are available).


Subsector : C01 Registration Date : 2017-01-31Organization : UNICountry : Italy


ICS : 67.020, 67.260National Ref : UNI1602580Title : Appliances for the production and dispense of hot beverages for use in commercial and

communities -Test methods and migration limits of lead and nickelScope : This standard specifies migration limits of lead and nichel in appliances for the production

and dispense of hot beverages for public catering.

Relatedness :National : REV/AMD UNI 11460:2012

Subsector : C01 Registration Date : 2017-01-04Organization : UNMSCountry : Slovakia


ICS : 19.020, 67.060National Ref :Title : Cereals for human consumption. Part 2: Grain of wheat for human consumptionScope : The subject of revision of the Slovak Technical Standard for wheat will be changes in classes

and parameters of wheat quality. Updated will be testing methods of parameters. The aim of revision will be better and more accurate characterization of the highest quality wheat to

Page 19

enhance competitiveness of this wheat.

Relatedness :National : REV/AMD STN 46 1100-2: 2003

Subsector : C01 Registration Date : 2017-01-27Organization : TSECountry : Turkey


ICS : 67.080.10National Ref :Title : Apricot JamScope : This Standard contains the apricot jams manufactured by using fruit of apricot (Prunus

armeniaea L.) and does not contain special apricot jam manufactured for diet.




ICS : 67.080.10National Ref :Title : Rose JamScope : This Standard contains the rose jams manufactured by using fruit of rose (Rose domescena

M.) and does not contain special rose jam manufactured for diet.




ICS : 67.080.10National Ref :Title : Figs JamScope : This Standard contains the figs jams manufactured by using fruit of figs (Ficus carica

L.Domestica.) and does not contain special figs jam manufactured for diet.




Page 20

ICS : 67.080.20National Ref :Title : Canned Chick Peas With Vegetable Oil-Ready to Serve Scope : This standard applies to canned chick peas with vegetable oil which is ready to serve.




ICS : 67.080.20National Ref :Title : Canned Stuffed Cabbage With Vegetable Oil- Ready to ServeScope : This standard applies to canned stuffed cabbage with vegetable oil which is ready to serve.




ICS : 03.080.30National Ref :Title : Workplaces – Consultancy services – The classification – General and spesific rulesScope : This standard includes general and spesific rules of workplaces of consultancy services and

classification.




ICS : 67.080.10National Ref :Title : Sour Cherry JamScope : This Standard comprises jams that are produced from cherry (Prunus cernausus L.), but

doesn’t comprise special cherry jam intended for diet.



Page 21


ICS : 67.080.10National Ref :Title : Strawberry Jam Scope : This Standard contains the jams manufactured by using fruit of strawberry (Fragaria vesca L.)

and does not contain special strawberry jam manufactured for diet.




ICS : 67.080.10National Ref :Title : Quince Jam Scope : This Standard contains the sour quince jams manufactured by using fruit of quince (Cydonia

vulgaris Pers.) and does not contain special quince jam manufactured for diet.




ICS : 67.080.20National Ref :Title : Cabbage- FrozenScope : This standard applies to frozen cabbage.




ICS : 67.080.20National Ref :Title : Frozen Green Broad Beans Scope : This standard applies to frozen green broad beans.


Subsector : C01 Registration Date : 2017-01-27

Page 22



ICS : 67.080.20National Ref :Title : Canned PearsScope : This standard covers canned pears




ICS : 67.080.20National Ref :Title : Canned Asparagus Scope : This standard covers canned Asparagus




ICS : 67.080.20National Ref :Title : Canned cornScope : This standard covers canned corn




ICS : 67.080.20National Ref :Title : Canned OkrasScope : This standard applies to canned okras.



Page 23Subsector C02: PAINTS AND RELATED PRODUCTS

Subsector : C02 Registration Date : 2017-01-16Organization : DINCountry : Germany


ICS : 87.040National Ref : DIN 55655-7Title : Paints and varnishes - Electro-deposition paints - Part 7: Wet-film resistance




ICS : 87.040National Ref : DIN 55655-8Title : Paints and varnishes - Electro-deposition paints - Part 8: Electric charge density




ICS : 87.040National Ref : DIN 55655-9Title : Paints and varnishes - Electro-deposition paints - Part 9: Stoving loss




ICS : 73.080, 85.040, 87.040National Ref :Title : Calcite- Used for Paper IndustryScope : This standard covers the precipite and natural calcite in paper inustry used as coating or

filling materials.



Page 24Subsector C03: CHEMISTRY

Subsector : C03 Registration Date : 2017-01-16Organization : ISSCountry : Serbia Latest Date for Comments : 2017-03-13

Project ID : 00060028/0001 Draft for public enquiry

ICS : 71.080.10National Ref : nkSRPS H.B9.200:2016Title : Standard Test Method for Hydrocarbon Traces in Propylene Concentrates by Gas

ChromatographyScope : This test method covers the determination of 5 to 500 ppm each of ethylene, total

butylenes, acetylene, methyl acetylene, propadiene, and butadiene in propylene concentrates.



Subsector C04: LABORATORY GLASSWARE



ICS : 29.120.30National Ref : DIN 19262Title : pH measurement - Plug socket and plug shielded for pH electrodes and pH measuring

chains



Subsector C17: TREES AND PLANTS

Subsector : C17 (Secondary Subsector)


Organization : UNMSCountry : Slovakia


ICS : 19.020, 67.060National Ref :Title : Cereals for human consumption. Part 2: Grain of wheat for human consumptionScope : The subject of revision of the Slovak Technical Standard for wheat will be changes in classes

and parameters of wheat quality. Updated will be testing methods of parameters. The aim of revision will be better and more accurate characterization of the highest quality wheat to enhance competitiveness of this wheat.

Relatedness :National : REV/AMD STN 46 1100-2: 2003


Page 25Subsector C20: EXPLOSIVES AND FIREWORKS



ICS : 71.100.30, 95.020National Ref :Title : Mine action - Post-clearance documentationScope : This standard provides guidance on the procedural requirements for the handover of

cleared land, and details responsibilities and obligations.



Subsector C99: UNDETERMINED



ICS :National Ref : 05701947Title : Food hygiene - Production and dispense of cream from cream whipping machines -

Hygiene requirements, testing



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Page 27Subsector F06: TERMINOLOGY PRINCIPLES

Subsector : F06 Registration Date : 2017-01-20Organization : ASICountry : Austria


ICS :03.080.01, 03.100.01, 03.100.30, 03.100.40

National Ref : ÖNORM D 1204Title : Translation Services -- Project ManagementScope : The present ÖNORM deals with the various steps to be observed while managing translation

services and describes the professional requirements and competences with regard to project managers in charge of those services. The standard will give translation project managers a practical orientation and will contribute to a harmonised approach to translation management tasks. Furthermore, by describing the processes in connection with translation projects, it intends to provide customers with information about how to support a rational und smooth flow of the translation process through proper preparation of the content to be translated prior to awarding the translation contract



Subsector F07: DOCUMENTATION AND INFORMATION

Subsector : F07 Registration Date : 2017-01-16Organization : DINCountry : Germany


ICS :National Ref : 00900113Title : Effectiveness of paper deacidification processes



Subsector F12: INFORMATION PROCESSING SYSTEMS

Subsector : F12 Registration Date : 2017-01-17Organization : LSTCountry : Lithuania


ICS : 35.040.10National Ref :Title : Information Technology. Coding of Lithuanian accented letters using several bytesScope : This standard specifies coding of Lithuanian accented letters not covered by ISO/IEC 10646.


Page 28

Subsector : F12 Registration Date : 2017-01-17Organization : LSTCountry : Lithuania


ICS : 35.040.10National Ref :Title : Information Technology. Input of Lithuanian accented letters using the keyboardScope : This standard specifies the input extension method for entering Lithuanian accented letters

using the standard keyboard.



Subsector F15: MATERIAL TESTING IN GENERAL



ICS :National Ref : 06234914Title : Rockwell penetration test to evaluate the adhesion of carbon layers



Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2017-01-26Organization : SISCountry : Sweden Latest Date for Comments : 2017-03-26


ICS :National Ref : 624070Title : Quality management - The process for competence managementScope : Denna standard ger riktlinjer för kompetensförsörjningsprocessen och är tillämpbar på alla

organisationer, oberoende av bransch, storlek och den produkt eller tjänst som tillhandahålls.




ICS : 01.040.03

Page 29

National Ref : DIN 55350-100Title : Concepts for quality management and statistics - Part 100: Quality management



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Page 31Subsector H04: SPORTS EQUIPMENT

Subsector : H04 Registration Date : 2017-01-16Organization : DINCountry : Germany


ICS :National Ref : 11201193Title : Gymnastic and playing field equipment - Electrically operated lifting devices - Safety

requirements and testing



Subsector H09: FURNITURE

Subsector : H09 Registration Date : 2017-01-31Organization : UNICountry : Italy


ICS : 97.140National Ref : UNI1602558Title : Furniture - Technical specification for the purchase of school furnitureScope : This Technical Report is a guide to draft technical specifications for the purchase of school

furniture.



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Page 33Subsector I02: FASTENERS

Subsector : I02 (Secondary Subsector)




ICS : 21.060.10, 23.040.40National Ref :Title : Plugs With Metric Fine ThreadScope : This standard cover fine threaded metric plugs as shown in the standard. I does not cover

other types of plugs.






ICS : 21.060.10, 23.040.40National Ref :Title : Hexagon fit bolts for structural steel bolting for supply with or without nutScope : This standard specifies requirements for M12 to M30 hexagon fit bolts assigned to product

grade C for use in structural steel bolting.

Relatedness :National : NewEuropean : Not Equivalent to DIN 7968:2017





ICS : 21.060.10, 23.040.40National Ref :Title : Reduced shank bolts and screws with coarse threadScope : This standard specifies requirements for M2,5 to M30 bolts and screw (bolts, for short) with

various head styles and a diameter of the unthreaded portion of the shank smaller than the minor diameter. Alt hough such bolts have a reduced shank, they are not waisted shank bolts.



Subsector I09: SMALL TOOLS

Subsector : I09 Registration Date : 2017-01-16

Page 34

Organization : DINCountry : Germany


ICS :National Ref : 12102711Title : Concept for the design of 3D models based on properties according to DIN 4000 - Part

180: Tool assemblies


Subsector : I09 Registration Date : 2017-01-16Organization : DINCountry : Germany


ICS : 21.060.10National Ref : DIN 9841Title : Hexagon socket head shoulder screw for press tools



Subsector I14: GEARS

Subsector : I14 Registration Date : 2017-01-16Organization : DINCountry : Germany


ICS : 01.040.21National Ref : DIN 3975-1Title : Definitions and parameters on cylindrical worm gear pairs with rectangular crossing

shafts - Part 1: Worm and worm wheel



Subsector I18: MINING

Subsector : I18 Registration Date : 2017-01-24Organization : ISSCountry : Serbia Latest Date for Comments : 2017-03-27


ICS :National Ref : nkSRPS M.J6.009:2016Title : Bond's grindability ball mill work indexScope : This Standard specifies metod for the determination of Bond's grindability ball mill Work

Index for solid mineral raw and other industrial materials. In Annex A date are average values

Page 35

of Bond's Work Index for some types of materials.



Subsector I99: UNDETERMINED

Subsector : I99 Registration Date : 2017-01-31Organization : SISCountry : Sweden Latest Date for Comments : 2017-03-30


ICS : 77.140.80National Ref : 111185Title : Identification marking for gas, liquid and ventilationg installationsScope : This standard specifies a separately cast test sample for evaluation of the nodularity of

graphite in spheroidal graphite iron castings, with a maximum wall thickness of 20 mm. For heavy section spheroidal graphite castings the cast-on test sample according to SS-EN 1563:2012, Figure 4, is recommended.



** End of Sector **




Sector M : METALLIC MATERIALS


Page 37Subsector M01: STEEL

Subsector : M01 Registration Date : 2017-01-27Organization : TSECountry : Turkey


ICS : 21.060.10, 23.040.40National Ref :Title : Plugs With Metric Fine ThreadScope : This standard cover fine threaded metric plugs as shown in the standard. I does not cover

other types of plugs.




ICS : 21.060.10, 23.040.40National Ref :Title : Hexagon fit bolts for structural steel bolting for supply with or without nutScope : This standard specifies requirements for M12 to M30 hexagon fit bolts assigned to product

grade C for use in structural steel bolting.




ICS : 21.060.10, 23.040.40National Ref :Title : Reduced shank bolts and screws with coarse threadScope : This standard specifies requirements for M2,5 to M30 bolts and screw (bolts, for short) with

various head styles and a diameter of the unthreaded portion of the shank smaller than the minor diameter. Alt hough such bolts have a reduced shank, they are not waisted shank bolts.



Subsector M04: COPPER

Subsector : M04 Registration Date : 2017-01-18Organization : UNMZCountry : Czech Republic Latest Date for Comments : 2017-02-28Project ID : 42003314/0001 Draft for public

Page 38

enquiryICS : 77.120National Ref :Title : Heavy non ferrous metals and their alloys – Compendium and examples of applicationScope : This standard is an overview of heavy non-ferrous metals and their alloys, i.e. metals with a

specific gravity greater than 5.0 g / cm3, provides labeling materials, chemical symbols and numerical indication of their composition and an overview of the various materials in product standards. The standard applies to base metals: copper, nickel, zinc, lead and tin, and their alloys.

Relatedness :National : REV/AMDČSN421300(2005)


Subsector M05: WELDING

Subsector : M05 (Secondary Subsector)


Organization : UNICountry : Italy


ICS :23.040.20, 23.040.45, 25.160.10

National Ref : UNI1602635Title : Qualification of welders for pipes according to EN 13067 and e UNI 9737 - Guidelines for

thepreparationofthetheoreticalexamquestionnaireScope : The technical report prepares the relevant questionnaire in the evaluation process of

theoretical knowledge of those who wish to take a qualifying exam for the certificate of conformitytotheUNIEN13067.The questions and the answers proposed in this Technical Report satisfy both form (questionnaire with multiple answers) in both the arguments as specified in paragraph 5.3 of EN 13067.


Subsector : M05 Registration Date : 2017-01-16Organization : DINCountry : Germany


ICS : 19.060National Ref : DIN 35227Title : Mechanical joining - Fatigue testing of mechanically joints



Subsector M08: LIGHT ALLOYS

Subsector : M08 Registration Date : 2017-01-18

Page 39

Organization : UNMZCountry : Czech Republic Latest Date for Comments : 2017-02-28


ICS : 77.120National Ref :Title : Light non ferrous metals and their alloys – Compendium and examples of applicationScope : This standard is an overview of light metals and their alloys, i.e. metals with a specific gravity

less than 5.0 g / cm3, provides designation materials, chemical symbols and numerical indication of their composition and an overview of the various materials in product standards.

Relatedness :National : REV/AMDČSN421400(2005)


Subsector M99: UNDETERMINED

Subsector : M99 Registration Date : 2017-01-16Organization : DINCountry : Germany


ICS :National Ref : 08201374Title : Inseparable elastomer sealed connectors made of metal for metallic pipes for use in

drinking water system installation - General requirements and test methods



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Page 41Subsector N01: PAPER AND BOARD

Subsector : N01 (Secondary Subsector)




ICS : 73.080, 85.040, 87.040National Ref :Title : Calcite- Used for Paper IndustryScope : This standard covers the precipite and natural calcite in paper inustry used as coating or

filling materials.



Subsector N05: TEXTILES

Subsector : N05 Registration Date : 2017-01-30Organization : ISSCountry : Serbia Latest Date for Comments : 2017-03-02


ICS : 59.080.01National Ref : naSRPS F.A1.012:2017Title : Textile - Resistance and water resistance testing


Subsector : N05 Registration Date : 2017-01-30Organization : ISSCountry : Serbia Latest Date for Comments : 2017-03-02


ICS : 59.080.30National Ref : naSRPS F.S2.022:2017Title : Textiles — Determination of fabrics resistance against bursting


Subsector : N05 Registration Date : 2017-01-16Organization : DINCountry : Germany


ICS : 59.080.50National Ref : DIN 83329Title : Ships and marine technology - Polypropylene fibre ropes made of yarns produced on

bast fibre spinning systems

Page 42


Subsector : N05 Registration Date : 2017-01-13Organization : TSECountry : Turkey


ICS : 61.040National Ref :Title : Textiles- Handkerchief Scope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of handkerchief

Relatedness :National : NewInternational : Modified ASTM D4153:2014



ICS : 59.080.30National Ref :Title : Textiles - Bedspread fabrics - Woven, knitted or flocked Scope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of woven, knitted or flocked bedspread fabrics

Relatedness :National : NewInternational : Modified ASTM D4037-02:2013



ICS : 59.080.30National Ref :Title : Textiles - Lining fabrics - WovenScope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of woven lining fabrics




ICS : 59.080.30

Page 43

National Ref :Title : Textiles - Lining fabrics - WovenScope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of woven lining fabrics




ICS : 59.080.30National Ref :Title : Textiles - Skirt, dress, trousers and blouse fabrics for women and girls - KnittedScope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of knitted skirt, dress, trousers and blouse fabrics for women and girls

Relatedness :National : NewInternational : Modified ASTM D4235-01:2008


Subsector N09: PLASTICS

Subsector : N09 (Secondary Subsector)




ICS : 23.040.01, 75.180.30National Ref :Title : Plastics floating floor supports – Used in closed and open areasScope : This standard covers of plastics floating floor supports of closed and open areas




ICS : 13.340.60, 91.060.30National Ref :Title : Floors in working places and areas with slip and fall risks - General requirements and

testingScope : This standard specifies criteria on suitable floor cover selection, design of floors, and means

to be taken in working places and areas. This standard covers the floors which comes in contact with slippery materials due to occupational or operational activities and have slip and fall risk potential in working places and areas. This standard does not cover the floors which are used in dry condition and have slip and fall risk potential that does not originate

Page 44

from slippery materials.

Relatedness :National : NewEuropean : Modified DIN 51130:2014


Subsector N14: PLASTICS PIPES

Subsector : N14 Registration Date : 2017-01-31Organization : UNICountry : Italy


ICS :23.040.20, 23.040.45, 25.160.10

National Ref : UNI1602635Title : Qualification of welders for pipes according to EN 13067 and e UNI 9737 - Guidelines for

thepreparationofthetheoreticalexamquestionnaireScope : The technical report prepares the relevant questionnaire in the evaluation process of

theoretical knowledge of those who wish to take a qualifying exam for the certificate of conformitytotheUNIEN13067.The questions and the answers proposed in this Technical Report satisfy both form (questionnaire with multiple answers) in both the arguments as specified in paragraph 5.3 of EN 13067.




ICS : 23.040.01, 75.180.30National Ref :Title : Plastics floating floor supports – Used in closed and open areasScope : This standard covers of plastics floating floor supports of closed and open areas




ICS : 23.040.01, 55.080National Ref :Title : Medical waste collection bag - Polyethylene (Pe)Scope : This standard covers general specification and test methods of bags made from plastic

sheets for using pre-collection, collection of medical waste or collection of special medical waste.

Page 45



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Page 47Subsector S01: ACOUSTICS AND SOUND INSULATION

Subsector : S01 Registration Date : 2017-01-09Organization : SNCountry : Norway


ICS : 91.120.20National Ref : NS 8178Title : Acoustic criteria for rooms and spaces for music rehearsal and performanceScope : This standard specifies differentiated criteria for acoustic conditions and characteristics for

spaces used for music rehearsal and performance. The criteria are specified for different types of music, regardless of the type of building in which the spaces are located. The standard provides criteria for room acoustics in spaces used for music rehearsal and performance, whether this is the primary use of the spaces or they are multi-purpose spaces. Together with the acoustic criteria, requirements are also given for room height, net room volume and net area. Criteria for acoustic conditions are differentiated on the basis of three music types: amplified music, quiet music and loud music.



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2017-01-13Organization : TSECountry : Turkey


ICS : 45.060.20National Ref :Title : Railway Vehicles-Power Supply Installations For PassengerScope : This standard, covers general prousions with which the coaches power supply installations

must comply and specific definations for components which standardisation is sought.



Subsector S15: SURGICAL INSTRUMENTS

Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : Germany


ICS :National Ref : 02702883Title : Medical instruments - Needle holder type Masson


Page 48



ICS :National Ref : 02702884Title : Medical instruments - Ligature needle type Deschamps




ICS :National Ref : 02702887Title : Medical instruments - Needle holder type Crile-Wood - Part 1: Without carbide inserts




ICS :National Ref : 02702888Title : Medical instruments - Needle holder type Crile-Wood - Part 2: With carbide inserts




ICS :National Ref : 02702890Title : Medical instruments - Forceps type Adson


Subsector : S15 Registration Date : 2017-01-16Organization : DINCountry : GermanyProject ID : 02702891/0001 Project

Page 49

EstablishedICS :National Ref : 02702891Title : Medical instruments - Retractor type Kocher




ICS :National Ref : 02702892Title : Medical instruments - Retractor type Körte




ICS :National Ref : 02702893Title : Medical instruments - Retractor type Langenbeck




ICS :National Ref : 02702894Title : Medical instruments - Abdominal and liver retractor type Mikulicz, blade curred




ICS :National Ref : 02702897Title : Medical instruments - Lid retractor type Desmarres

Page 50




ICS :National Ref : 02702898Title : Medical instruments - Retractor type Volkmann




ICS :National Ref : 02702901Title : Medical instruments - Retractors type Cushing




ICS :National Ref : 02702905Title : Medical instruments - Ear specula type Hartmann




ICS :National Ref : 02702910Title : Medical instruments - Bone levers type Hohmann


Page 51



ICS :National Ref : 02702918Title : Medical instruments - Osteotomes type Lexer




ICS :National Ref : 02702919Title : Medical instruments - Osteotomes type Lambotte




ICS :National Ref : 02702926Title : Medical instruments - Self-retaining retractor type Beckmann-Adson



Subsector S19: FIRST AID EQUIPMENT AND RESCUE SYSTEMS



ICS :National Ref : 06301831Title : Surgical dressings - Surgical sheets


Subsector : S19 Registration Date : 2017-01-16

Page 52

Organization : DINCountry : Germany


ICS :National Ref : 06301832Title : First aid material - First-aid box for fire-brigade motor cars



Subsector S20: WASTE COLLECTION, HANDLING AND TRANSPORTATION



ICS : 13.030.10National Ref : NS 9432Title : Waste - Planning of renovation and execution of collection - Requirements and

recommendationsScope : This standard specifies solutions for waste collection


Subsector : S20 (Secondary Subsector)




ICS : 23.040.01, 55.080National Ref :Title : Medical waste collection bag - Polyethylene (Pe)Scope : This standard covers general specification and test methods of bags made from plastic

sheets for using pre-collection, collection of medical waste or collection of special medical waste.



Subsector S24: SOIL QUALITY



ICS : 13.080.99

Page 53

National Ref : DIN 19740-1Title : Soil quality - Environmental requirements for the construction and operation of civil

shooting ranges - Part 1: Principles and technical requirements


Subsector : S24 Registration Date : 2017-01-24Organization : PKNCountry : Poland


ICS : 13.080.01National Ref : prPN-Z-19005Title : Soil quality -- Assessment of the soil sanitary conditions -- Detection and quantitative

determination of eggs of the intestinal parasites from species Ascaris, Trichuris and Toxocara in dehydrated sewage sudge

Scope : This Standard specifies a method for detection and quantitative determination of eggs of the intestinal parasites from species Ascaris, Trichuris and Toxocara in dehydrated sewage sludge. This method is applicable for detection of eggs of intestinal parasites and determnination of quantity of viable eggs of these intestinal parasites of the species listed above per 1 kg of dry matter of the dehydrated sewage sludge, which allows for their parasitological assessment.



Subsector S99: UNDETERMINED



ICS :National Ref : 08000294Title : Nuclear medicine departments - Part 1: Rules for the construction and equipping of

facilities for ambulatory use of unsealed radioactive materials for diagnosis and treatment




ICS :National Ref : 08000295Title : Nuclear medicine departments - Part 2: Rules for the construction and equipment of

departments for the therapeutic use of unsealed radioactive substances

Relatedness :

Page 54

National : New

Subsector : S99 Registration Date : 2017-01-20Organization : SISCountry : Sweden Latest Date for Comments : 2017-03-20


ICS : 11.140National Ref : 8760120Title : Health care textiles - Trousers for staffScope : This standard covers requirements and design specification for personnel trousers, designed

as a working garment for staff in health care. The garment is designed to fit both men and women.


Subsector : S99 Registration Date : 2017-01-20Organization : SISCountry : Sweden Latest Date for Comments : 2017-03-20


ICS : 11.140National Ref : 8760121Title : Health care textiles - Blouse for staffScope : This standard covers requirements and design specification for personnel blouse, designed

as a working garment for staff in health care. The garment is designed to fit both men and women.




ICS : 11.140National Ref : NS 3342Title : Health service - Unisex coatScope : The standard gives requirement for Unisex coat. The design is equal for females and males.



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Page 56Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2017-01-16Organization : DINCountry : Germany


ICS : 47.020.10National Ref : DIN 83104Title : Dogs for heavy-duty doors on ships and for hatch covers




ICS : 47.020.10National Ref : DIN 83417Title : Rope hatches - Nominal size 300




ICS : 47.020.40National Ref : DIN 83418Title : Guide pulley for rope hatches




ICS : 21.140National Ref : DIN 83419Title : Elastomer gaskets for covers


Subsector : T01 Registration Date : 2017-01-16Organization : DIN

Page 57

Country : Germany


ICS : 23.060.10National Ref : DIN 86251Title : Shut-off valves for shipboard use, of cast iron, with flanges, DN 15 to DN 500




ICS : 23.060.50National Ref : DIN 86252Title : Non-return valves for shipboard use, cut-off type, of cast iron, with flanges, DN 15 to DN

500




ICS :National Ref : 13202873Title : Closing devices (fasteners) and fork plates for ship's equipment




ICS :National Ref : 13202883Title : Elastomer mounts - Technical specification



Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2017-01-16Organization : DIN

Page 58

Country : Germany


ICS :National Ref : 13115763Title : Aerospace Series - Methods for inspection of metallic components, produced with

additive powderbed fusion processes




ICS :National Ref : 13115776Title : Aerospace series - Technical Specifications for additive manufacturing of metallic

materials with the powder bed process




ICS :National Ref : 13115809Title : Aerospace - Test methods for surface protection; Paints and varnishes - Part 6: Chemical

and electroplated coatings



Subsector T16: LIFTS & ESCALATORS

Subsector : T16 Registration Date : 2017-01-20Organization : ASICountry : Austria


ICS : 91.140.90National Ref : ÖNORM B 2450-2Title : Lifts, escalators and passenger conveyors - Part 2: Risk assessment for liftsScope : This ÖNORM describes each one possible procedure for the risk assessment for additional

risks for lifts with openings in their shafts, for the construction operation and for landings with limited access (e.g. landings to penthouse), and can be used for the development of risk assessments for the complete lift, necessary according to ASV 2015, Attachment I (Anlage I) in conjunction with ÖNORM EN ISO 14798.

Page 59


Subsector : T16 Registration Date : 2017-01-09Organization : SNCountry : Norway

Project ID : NOT17005/0001 Draft for public enquiry

ICS : 91.140.90National Ref : NS 3808Title : Existing lifts, lifting platforms, escalators and moving walks - Improvements of safetyScope : The standard defines measures when rebuilding existing lifts, lifting platforms, escalators and

moving walks to improve safety



** End of Sector **




Sector Z : INFORMATION TECHNOLOGY


Page 61Subsector Z99: UNDETERMINED

Subsector : Z99 Registration Date : 2017-01-31Organization : UNICountry : Italy


ICS : 35.020National Ref : UNI1602663Title : Unregulated professional activities - ICT professional profiles - Part 1: Methodology for

the construction of professional profiles based on the e-CF system Scope : The present proposal aims to standardize the construction of professional profiles based on

the e-CF system and the related generation 2 and 3 profiles, in order to ease up and harmonize their use in various operational contexts which may differ with regards to technologyandapplicationaspects.The standard proposal takes as a main reference what already defined in the CWA 16458, completing and contextualizing it to the national market.

Relatedness :National : REV/AMD UNI 11621-1:2016



ICS : 35.020National Ref : UNI1602664Title : Unregulated professional activities - ICT professional profiles - Part 2: “Second

generation” professional profilesScope : The present proposal aims to define the main second generation ICT professional profiles,

taking what is defined in the CWA 16458 as a reference model to be expanded and contextualized to the national environment.




ICS : 35.020National Ref : UNI1602665Title : Unregulated professional activities - ICT professional profiles - Part 3: Web profession

professional profilesScope : The present standardization proposal aims to use the tools provided by the related part 1

“Methodology for the construction of professional profiles based on the e-CF system” in order to define third generation professional profiles related with web profession.


Subsector : Z99 Registration Date : 2017-01-31

Page 62

Organization : UNICountry : Italy


ICS : 35.020National Ref : UNI1602666Title : Unregulated professional activities - ICT professional profiles - Part 4: Information

security professional profilesScope : The present standardization proposal aims to use the tools provided by the related part 1

“Methodology for the construction of professional profiles based on the e-CF system” in order to define third generation professional profiles related with information security.



** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

Documents

Information procedure - unms.sk · Information procedure Page 1 Monthly Notifications Register ... UNI Country : Italy Project ID : 01602483/0001 Project Established ... the EN 15193