View
61
Download
0
Category
Preview:
DESCRIPTION
Integrated Power Converters for high efficiency RF Systems. By: Aaron Pereira Supervisor: Prof. Graham Town & Prof Neil Weste Department of Electronic Engineering Macquarie University, NSW, Australia. Outline. Introduction Background Solution Gallium Nitride Material & Devices - PowerPoint PPT Presentation
Citation preview
1
Integrated Power Converters for high Integrated Power Converters for high efficiency RF Systemsefficiency RF Systems
By:Aaron Pereira
Supervisor:Prof. Graham Town & Prof Neil Weste
Department of Electronic Engineering
Macquarie University, NSW, Australia.
2
Outline
• Introduction • Background• Solution• Gallium Nitride Material & Devices• PA + High Efficiency Modulator• Triquint 0.25u process & circuits designed• Further Work• Questions
3
Introduction
MQ University Department of Electronics:ARC Linkage Grant
•Integrated Power converters for renewable energy systems •100MHz Envelope tracking system using GaN process for base station applications
•Using Triquint existing 0.25u GaN process, to design a high frequency, high efficiency modulator to be integrated into a Power Amplifier (HEPA) module for base stations applications.
4
Background
RF Power Efficiency
5
Quest for Power, Linearity & Efficiency
VDD
RL
BiasVout
Rs
Vs
Source
InputNetwork
Output Network
RF-in
PowerAmplifier Antenna
RF-out
Q
I
Edge Constellation:3pi/8, rotated 8-PSK
Schematic of PA
Actual Size
Stauth, Sanders, "Power supply rejection for RF amplifiers," (RFIC) Symposium, June 2006 Popovic,Zoya, “High efficiency microwave PA with dynamic power supplies”, ECEN 5014, Spring 2009, University of Colorado, Boulder
6
Amplifier Classes- A, AB,B, C, D,E,F Conduction Angle, Efficiency
Niehenke,E, “GaN Power Amplifiers” Niehenke Consulting
7
Non Linear PA v Linear PA’sCan’t do amplitude modulation Can- but highly inefficient
Stauth, Sanders, "Power supply rejection for RF amplifiers," (RFIC) Symposium, June 2006
8
Average Efficiency
9
Solution?Dynamic Power Supplies
10
Solution- Research Objective
• HPA +Dynamic power supply MMIC• Use Triquint Semiconductor 0.25u GaN Process
to fabricate a monolithic solution.
MMIC Photo : Courtesy if Stephen Diebold, Karlshue Institute of Technology
11
Gallium Nitride – Materials & Devices
RF & Power Electronics
12
Properties of GaN
Niehenke,E, “GaN Power Amplifiers” Niehenke Consulting
13
Anomalous Behaviour - Traps
Development of virtual gates wrecks havoc in device performance
Ventury, R. “PhD Thesis defence”, UCSB.
14
Traps affecting FET performance
Kink effects IDS v VDS
Shift in Threshold VTH
RF Dispersion
ALBAHRANI,S.A , “ CHARACTERIZATION OF TRAPPING IN GALLIUM NITRIDE HEMTS”, PHD THESIS, MACQUARIE UNIVERSITY, AUSTRALIA 2011
15
Device Engineering- Field Plates & Passivation
Niehenke,E, “GaN Power Amplifiers” Niehenke Consulting
16
MQ- Arbitrary Pulsed Semiconductor Parameter Analyser System (APSPA)
17
Pulsed I-V MeasurementsUnderstanding TQTX devices
18
Pulsed I-V Measurement (Cont.)
19
PA + High Efficiency Modulator
Design Options
TechnologyFCC regulationsCostModulation Schemes
20
Power Amplifier Biasing
21
Amplifier – Load-linesSwitching PA as Power Converters
22
Demonstration of Class E amplifier Electrodeless Fluorescent Lamps
Demonstration of Resonant Inverter Circuit for Electrodeless Fluorescent Lamps Using High Voltage GaN-HEMT Wataru Saito*, Tomokazu Domon**, Ichiro Omura*, Tomohiro Nitta*, Yorito Kakiuchi*, Kunio Tsuda*** and Masakazu Yamaguchi* * Semiconductor Company, Toshiba Corp **Toshiba Business and Life Service ***R&D Center, Toshiba Corp1 Komukai Toshiba-cho, Saiwai-ku, Kawasaki 212-8583, Japan Phone: +81-44-549-2603, FAX: +81-44-549-2883, e-mail: wataru3.saito@toshiba.co.jp
13.56 MHz Class E Amplifier 620V/ 1.4 A GaN HEMT – 90% at 9W Output Power
23
DC-DC Converter ArchitectureUsing switching PAs
DC-DC Converter fabricated using FET’s non-optimized for power conversion
Popovic,Zoya, “High efficiency microwave PA with dynamic power supplies”, ECEN 5014, Spring 2009, University of Colorado, Boulder
24
PA and Modulator Integration Challenges – Power Supply Rejection Ratio (PSSR)
FCC has strict regulations regarding this.
Selection of filters and switching frequencies critical
Stauth, Sanders, "Power supply rejection for RF amplifiers," (RFIC) Symposium, June 2006
25
Triquint 0.25u GaN Process & Circuit Designs
26
27
Circuits Design- Ring Oscillators, inverters, tuned amplifiers
28
Circuits Designed-MMIC LayoutRing Oscillators, Inverters, Tuned Amplifiers
29
Further Work
• Switching PA’s E/F• Class AB PA (16 Weeks)• Filters for noise rejection (8 Weeks)• Integration (20-24 Weeks)• Thermal Issues (16 Weeks)• Testing (14 Weeks)
30
Questions?
Recommended