KuWFi Point-to-PointBridge...Input ip address 192.168.188.XX(xx from 1-251)then click Close...

CPE70R quick Stat Guide www.kuwfi.com mancy@kuwfi.com

KuWFi Point-to-Point Bridge

Product picture

Package inc lud ing (POE adapte r wi l l be offer in d i f fe rent count r ie s )

Product body size :168mm*88mm*57.6mm

Working:-30°C~55°C

Storage:-40°C~70°C

Interface :

10/100Mbps RJ45 WAN Port

10/100Mbps RJ45 LAN Port

LED display, show operation mode, channel, signal strength

F(Function) switch button for LED display

S(Select) button for LED display

Reset button, press 15 seconds to revert to default setting, press 1 seco

nd to finish LED display configuration

How to paired1. Config Master/ Slave CPEPut the switch to H, CPE will work as Mast. Put the switch to C, CPE will

work as Slave.

2.Config Master CPEWhen bridge two CPEs, make one work as master: press "F" to make H/ C blinking, and press "S" to change to "H", it will save automatically in 5 seconds2. Point to Point Connection Press reset button on both master and slave CPE, will start bridging.

H mean host/master 005 mean channel, C mean Client 005 mean slaveChannel , the two unit in the same channel ,host/master IP 192.168.188.

253 Slave IP 192.168.188.100

Push and then pull the front cover out

Application 1Long distance WiFi coverage .extend wifi signal from A house to B house,like below photo show

POE adapter POE port connect to CPE Master Lan Port

Use Ethernet cable connect LAN cable to POE adapter POE adapter.WAN port cannot charger power .

Mater/Host CPE Wan port connect to router / POE SWITCH

Use Ethernet cable connect Lan cable to POE adapter POE adapter. Slave/Host CPE Wan port connect to PC or ip camera or other wifi machine

The LED will show H005/C005 mean channel H254 C100 mean IP address P-25/P-23 mean wifi signal ,if no digital ,it mean no paired

Then find network to setup the CPE

Change network adapter settings, local Area connection

Then click and chooseproperties

Select use the following ip address

Input ip address 192.168.188.XX(xx from 1-251)then click Close

Log in CPE70R mater web ui use, IE or firefox browser wrote 192.168.188.253 ,the

the user name and password is admin

Update version come with AP+Repeater mode more stable

Change wifi ssid name password like below show

Application 2 CPE are used for wireless video transmission with camera ( one placewith one place)

Connect CPE70R Client to PC and power adapter as below photo show

Connect CPE70R HOST/MASTER to power adapter as below photo show

Set range between CPE70R host and CPE Client 500M-1000M, of thistwo CPE

Use Ethernet cable to connect wan port of CPE70R with IP camera

Use Ethernet cable to connect lan port to cpe70R client POE PORTof power adapter ,wan port connect IP camera

Use Ethernet cable to connect lan port to cpe70R master POE PORT ofpower adapter ,wan port connect router

Networktopology

Application 3

CPEs are used in wireless video transmission to more than 2-3or more cameras

Like below photo show.2. use Ethernet cable TO connect switch to IP cameras

Use Ethernet cable to connect switch to CPE70r Client (C) Use Ethernet cable to

connect lan port of CPE70R host (H) to POE port of POE adapter Use Ethernet

cable to connect Wan port of CPE70R (H) to NVR/DVR Turn one all

equipment ,wait for 1 min,you can see video of camera on

monitor

The web UI show one paired to work (AP+repeater mode) the web UI Repeater modeWiFi SSID turned off by default.More Network topology show below

If you need any questions or problem please feel contact us , thanks

KuWFi Point-to-PointBridge...Input ip address 192.168.188.XX(xx from 1-251)then click Close...

Documents

xx X xx xx SELLO xx DÍAS DE PERROS - PlanetadeLibros · xx xx x xx xx colecciÓn xx xx caracterÍsticas xx xx impresiÓn forro tapa papel plastifÍcado uvi relieve bajorrelieve stamping

SHEETNo. SHEETDESC. 20/06/19 xx/xx/xx xx/xx/xx TWO-WAY

mobile@estes-express.com • Phone: (251) 964-4801 (251) 964

Space Colour XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX ... · 82,5 20 107,5 107,5 100/120/140/160 35 84,5 82,5 100/120/140/160 20 107,5 70,3 126cm/146cm/166cm x 88 x 113 246cm/286cm/326cm

ECUE-XX-XXX-XX-XX-XX-1-XX-MKT - Samtec …suddendocs.samtec.com/prints/ecue-xx-xxx-xx-xx-xx-1-xx...THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING,

BTSA Développement, Animation des Territoires Ruraux LEGTA Mancy Lons-le-Saunier

151-29: Clinical Trial Online - Running SAS on the Web ......xxxxxxxxxxxxxxxx xx xx.x xx xx.x xx xx.x xx xx.x xxxxxxxxxxx xx xx.x xx xx.x xx xx.x xx xx.x xxxxxx xx xx.x xx xx.x xx

Tarifa 2015 - Estudios Y Soluciones Sostenibles S.L....turboTEC plus mixta turboTEC turboTEC pro Ref. Propano Precio EUR Pág. 251 6261 251 6263 251 6271 251 6269 251 6273 251 2476

全てにおいて高性能。download.brother.com/pub/jp/j-mfc/catalog/justio1409.pdf800 枚 251 枚 800枚 251枚 251 251枚 251 251 （Hi-Speed）（Hi-Speed）（Hi-Speed）

251 Detailing

FEDERAL RESERVE SYSTEM Regulation XX; Docket No. R 1489€¦ · 12 CFR Part 251 Regulation XX; Docket No. R 1489 RIN 7100 AE 18 Concentration Limits on Large Financial Companies AGENCY:

BTSA Développement, Animation des Territoires Ruraux LEGTA Mancy Lons-le-Saunier

SARVA VIABI › webresources › images › ...xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx

XX XX XX XXXX XX XX XX XX XX Colour XX XX XX XX ... - Oficox

REVISION CE SEAF-XX-XX.X-XX-XX-X-A-XX-K-XX

DAVIS LABORATORIES - Heavy · davis laboratories tel: (702) 251-0202 fax: 251 ... prequalified groove joint ... smaw manual: xx semi auto positions: vertical-up /overhead filler metal

Holistic Health Care1 (MD.251) การดูแลสุขภาพแบบองค์รวม 1 (พศ.251)

ï420-0855 TEL054-251-0016 FAX054-251-0056 ... · ï420-0855 TEL054-251-0016 FAX054-251-0056 16

251 Cerâmica 61 (2015) 251-258

0679L Sep2016DC1 · 0679L0250-XX 06791.0375-XX 0679L0500-XX 0679L0630-XX 0679L0750-XX 06791.1000-xx 0679L1250-XX 06791.1500-xx 0679L2000-XX 0679L2500-XX 0679L3000-XX 0679L3500-XX