View
220
Download
1
Category
Tags:
Preview:
Citation preview
Lecture #8
Cassandra PaulPhysics 7A
Summer Session II 2008
Announcements• No Lecture or DL on Monday! (Labor Day)• There is DL on Tuesday and Wednesday.• I will be out of town next Tuesday and Wednesday.
– Substitute for my office hours.• Lecture next Wednesday
– Sub– Evaluations– Short Lecture– Quiz 5
• Review Sessions posted over the Weekend• Final Lecture Monday September 8th
Today
• Intro Model to Thermodynamics• Ideal Gas Model• Practice with both• Enthalpy• Microstates• Entropy
Intro Model of Thermodynamics
A tool we use to talk about the internal energy of a system.
What is Thermodynamics?
In a nutshell, it is the study of the transfer of energy between systems and how the energy instills movement, i.e., how the system responds.
Ex. If we heat something, it expands.
Open box of gas
But wait… does it have to expand?
Closed box of gas Open box of gas
No, we can constrain the system.
Does it take more or less energy to change the temperature of the constant volume system?
Closed box of gas Open box of gas
A) MoreB) LessC) The SameD) Depends on
Substance
Does it take more or less energy to change the temperature of the constant volume system?
Closed box of gas Open box of gas
Closed box: all heat goes into the gas’s internal energy
Open box: Some heat goes into pushing air out of the way (work is leaving the system)
CV measurement
CP measurement
What is ‘work’ in the Thermodynamic Model?
Final Initial
EEthth
T
Work
Volume is decreasing, positive work is being done on the system.
ΔEth = W
What is ‘work’ in the Thermodynamic Model?
Initial Final
EEthth
T
Work
Volume is increasing, negative work is being done by the system.
ΔEth = W
U = Internal Energy
When we add heat or work to a substance we are changing the internal energy, but what is internal energy anyway?
It is the energy of the system associated with the particles in the system.
ΔEth + ΔEbond = ΔU = Q + W
Eth + Ebond = U
Then how is U different than Etot?Then how is U different than Etot?
It does not include external energies of the system. For example…
If we throw a coconut off the roof…
The Internal Energy of the coconut:
• Does not account for the height of the coconut
• Does not account for the velocity of the coconut
• Does account for the Temperature of the coconut
• Does account for the bond energy of the coconut
• Does account for the average KE of the particles in the coconut
• Does account for the average PE of the particles in the coconut
∆U : Internal energyEnergy associated with the atoms/molecules inside the body Of material
∆Etotal must include all changes of energy associated with the system…
∆Etotal = ∆Ethermal + ∆Ebond + ∆Eatomic + ∆Enuclear + ∆Emechanical
Energy associated with the motion of a body as a whole (KE and PE of totalSystem)
ΔU is a part of ΔEtot
Remember conservation of energy?
…if there’s no change in ∆Emechanical, ∆ U
First law of Thermodynamics
External Energies vs. U
External• KE of the SYSTEM• PE of the SYSTEM
Internal (U)• Average KE of the
Particles in the system• Average PE of the
Particles in the system• Eth of the System
• Ebond of the System
State Functions
A State Function is a macroscopic property of a physical system of matter that has a definite value that depends only on certain observable parameters of a system.
A State Function does not depend on how the system evolved, but only on the value of the current parameters. (Initial and Final values)
Let’s bring back a bucket of water…
What are some observable (measurable) properties of the water in this bucket?
Temperature
Volume
Pressure
Eth
Eb KEPEAll State Functions!!!!!! Entropy
Enthalpy
But can I measure how much heat was added and work was done on this
bucket since the beginning of time?
Only If you were there since the beginning of time!
State Functions can have an Instantaneous Value,
Processes can not!
Processes
• Processes are quantities that depend on HOW a system ends up at it’s final state.
• The have no ‘instantaneous values.’ They can only be measured over some period of time.
• They are not considered properties of the system.
Can you think of any processes? (Hint: they cause change, but aren’t changes themselves.)
Heat and Work!
ΔU = Q + W
This is the “First Law of Thermodynamics”It is often EXTREMELY useful to use it like this:ΔEth + ΔEbond = ΔU = Q + W
And to also use it in conjunction with the Ideal gas law, so let’s pause a moment and (officially) introduce the ideal gas model…
Ideal Gas Model
A tool we use to describe gases in situations where we can ignore inter-
particle interactions.
PV=nRT or PV=NkBT
• n= number of moles• N=number of atoms• kB =1.381x10-23 J/K
• R=8.314 J/(K mole)There are other constructs of this model, but
most we have introduced in other places, check the blue pages for more information.
OK what I was saying…
• It is VERY useful to use the first law of thermodynamics with the sum of the internal energies and with ideal gas law:
ΔU = Q + WΔU =ΔEth + ΔEbond
PV=nRT
Let’s See How…
Here is a particular cycle that happens to one mole of a monatomic gas, no phase
change happens during this process.x105
x10-3
a
b
c
Let’s write this on the board so we can keep track of it.
From abca, what is ΔU?
Let’s see:ΔU =ΔEth + ΔEbond
ΔU =ΔEth
ΔU = (# of modes per particle)(# of particles) ½ kBΔT
ΔU = 3(6.02x1023) ½ kB(Tf-Ti)
OK… let’s find the T at a and a…. wait…The final STATE is the same so:Tf=Ti! Therefore ΔU = 0
Note: if you don’t believe me, use PV=nRT
OK well what is the Q for the process abca ?
ΔEth + ΔEbond = ΔU = Q + W
Does Q equal zero for this process? (Don’t calculate anything.)
A.Yes, Q = 0B.No, Q has a negative valueC.No, Q has a positive valueD.Can’t be determined.
What is the Q for the process abca ?
ΔEth + ΔEbond = ΔU = Q + W
ΔU = Q + W = 0Work is easier to find, let’s find that and then
get our Q.
Work for abc:Wabc= ½ (1x10-3 x 1x105) + (1x10-3 x 1x105)
Work for ca:Wca = (1x10-3 x 1x105)
Wabca = Wabc + Wca = -150J + 100J = -50J
x105
x10-3
a
b
c
Positive of Negative?
Negative W: V is increasing
Wabc = -150J
Positive of Negative?
Positive W: V is decreasing.
Wca = 100J
What is the Q for the process abca ?
ΔEth + ΔEbond = ΔU = Q + W
ΔU = Q + W = 0 = Q + -50JQ = 50J
Harder Problem…
What is the change in Eth from bc?
Start with: ΔEth + ΔEbond = ΔU = Q + W
ΔEth = Q + W
We could find W… but how do we find Q?Need to use something else…PV=nRT!
Harder Problem…
What is the change in Eth from bc?
ΔEth = Q + W
PbVb=nRTb
(2x105)(1.8x10-3) = (1)(8.31)Tb
Tb = 43.3°K
PcVc=nRTc
(1x105)(2.3x10-3) = (1)(8.31)Tc
Tc = 27.7°K
What is the change in Eth from bc?
ΔEth = Q + W
Tb = 43.3°K
Tc = 27.7°K
What equation do we use for Eth?
ΔEth = (# of modes per particle)(# of particles) ½ kBΔT
ΔEth = (3)(6.02x1023) ½ (1.38x10-23) (27.7 – 43.3)
ΔEth = -194.4 J
So… use all three equations together!
ΔU = Q + WΔU =ΔEth + ΔEbond
PV=nRT
Enthalpy
Is a state function:- U depends only on state of system- P depends only on state of system- V depends only on state of system
=> H depends only on state of system
(Hess’s law)
initial
final
P
V
initial
final
P
V
W = 0
Constant volume Constant pressure
Note: works for solids and liquids too!
Enthalpy
*Derivation in P.84
ΔEth + ΔEbond = ΔU = Q + W
Intro to Statistical Model of Thermodynamics
A tool we use discuss probability of particles or a system being in a
certain state.
States and Microstates
• A state in the Thermodynamic Model is a combination of instantaneously measurable parameters. – Ex: Solid phase, 30C, at 1Atmosphere of Pressure.
• You can think of it is any point on any state diagram P
V
1
2
3
4
5
What the heck is a Microstate?
• A microstate is one of the different ‘ways’ a system can be in that state.
P
V
State 1
Microstate1
What the heck is a Microstate?
• A microstate is one of the different ‘ways’ a system can be in that state.
P
V
State 1
Microstate 2
What the heck is a Microstate?
• A microstate is one of the different ‘ways’ a system can be in that state.
P
V
State 1
Microstate 3
Let’s try a real world example..
(Well sort 0f real world)
After graduating from Davis, you decide you love it here so much
that you want to start a farm and live here forever..
You go to the state Fair to get your first animals. There are only two kinds for sale and you can only buy 1.
You go back the next day, and pick another one. What are your possible combinations?
What are the States? And what are the microstates of the system?
State = 1Cow and 1 Sheep State = 1Cow and 1Sheep
State = 2 Cows State = 2 Sheep
Microstate = CS Microstate = SC
Microstate = SSMicrostate = CC
Three States, but 4 microstates, which State is most probable?
If you leave it up to chance…
You are most likely to have a state of one cow and one sheep, because there are more microstates in that state!
Recommended