View
214
Download
0
Category
Preview:
Citation preview
2
23www.hilti.com.au | T 131 292
Measuring systems
02 Measuring systems
Range meters
Line, point and combi lasers
Rotating lasers
Location and detection systems
PD 4 laser range meter Page 26PD 40 laser range meter Page 27PD 42 laser range meter Page 28
Accessories Page 29
PMP 34 point laser Page 30PMP 45 point laser Page 31PML 32-R line laser Page 32
PMC 46 combi laser Page 33Accessories Page 34-35
PRE 3 rotating laser Page 36PR 25 IF rotating laser Page 37
PR 35 rotating laser Page 38PRI 2 rotating laser Page 39
PR 26 rotating laser Page 40Accessories Page 41-43
PX 10 transpointer Page 44Accessories Page 45
PS 35 rebar detector Page 46PS 200 ferroscan Page 47
24 www.hilti.com.au | T 131 29202 Measuring systems
Measuring systems
llllllllllll
Only with laser receiver
Working range
Measuring tools 10 30 50 100 m 200 m 300 m Applications
PD 42With target plate
With target plate
PMP 34
With laser receiver
* radius distance
*
PR 35 (New)
Distance measuringHorizontal alignment
Vertical alignment and plumb
90° layout
Slope
Indo
orO
utdo
or
Rot
atin
g la
sers
Lase
r ra
nge
met
ers
PMC 46With laser receiver
PD 40
PRE 3
l Optimal use¢ Possible use
PD 470 m
PML 32-RWith laser receiver
*
With laser receiver*
PRI 2
With laser receiver*
PR 26
With laser receiver*
PR 25 IF
Mul
tidire
ctio
nal l
aser
s
PMP 45 (New)
¢¢llllllll¢¢
2
25www.hilti.com.au | T 131 292
Measuring systems
02 Measuring systems
PX 10Localise 1.35 m0,05 m
PS 200Detection 160 mm0 m
Locate start and exit points for drilling and coring
Rebar detection and analysis
Det
ectio
n /
Loca
lise
PS 35Localise 120 mm0 m Locate rebars and
non-ferrous objects before drilling
80 mmRebars Non-ferrous objects
Hilti Laser repair facility andCalibration Service■ In order to ensure reliability in accordance with standards and
statutory requirements, Hilti recommends that laser measuring and detection tools are checked regularly. In normal use, measuring tools should be checked annually.
■ TheHiltiCalibrationServiceprovidesconfirmationthatthetooltestedisinconformancewiththespecificationsgiveninitsoperatinginstructions.
■ Hiltiprovidesverificationofcalibrationbyapplyingalabeltoeachtool tested.
■ WrittenconfirmationofaccuracycanalsobeprovidedbyHiltiatthetime of calibration of the measuring tool. This may be required to comply with ISO 9001.
Hilti now offers an in-house repair facility for all Hilti measuring and detection tools:
■ PD laser range meters
■ PM multi-directional lasers (point, line and combi lasers)
■ PR rotating lasers
■ PX locators
■ PS detectors
Detection
Location and detection tools Working range Applications
26 www.hilti.com.au | T 131 29202 Measuring systems
Measuring systems
Laser range meterPD 4
Applications n Measuring distances between 0.2m and 70m with great accuracy n Measuring quickly and safely in places where access is difficult
Ordering
Product description Package Contents Item Number
Laser range meter PD 4 PD 4 laser range meter complete with soft pouch, hand strap, 2x AA batteries and operating instructions.
00202416
Triple PD 4 combo 3x PD 4 laser range meter complete with soft pouch, hand strap, 2x AA batteries and operating instructions.
03439615
Technical data
PD 4
Max. measuring distance 70 m
Min. measuring distance 0.2 m
Laser 635 nm, Class 2 (IEC 825-1), Class II (FDA 21 CFR)
Accuracy ± 2 mm
IP protection class IP X5
Battery type 2 x AA
Operating temperature range -15 - 50 °C
Dimensions (LxWxH) 120 x 45 x 28 mm
Weight without batteries 180 g
For easy, everyday measuring.
Advantages n 100% waterproof and dust tight. Very ruggedly built, with an
extremely robust casing to withstand the harshest jobsite conditions
n Single button operation. Extremely easy to use. Makes measuring a one person task. Ergonomic design for a unique level of operating convenience
n Laser precision for very reliable measurements
2
27www.hilti.com.au | T 131 292
Measuring systems
02 Measuring systems
Laser range meterPD 40
Applications n Measuring distances of 0.05m to 100m with laser precision n Direct distance measurements and area calculations n Measuring quickly and safely in places where access is difficult
Ordering
Product description Package Contents Item Number
Laser range meter PD 40 PD 40, hand strap, 2 x AA alkaline batteries, canvas pouch, battery compartment key and operating instructions.
00388214
Technical data
PD 40
Min. measuring distance 0.05 m
Max. measuring distance 100 m
Calculation functions +, -, Area
Laser 635 nm, Class 2 (IEC 825-1), Class II (FDA 21 CFR)
Accuracy ± 1 mm
IP protection class IP 54
Battery type 2 x AA
Operating temperature range -10 - 50 °C
Dimensions (LxWxH) 120 x 55 x 28 mm
Weight without batteries 200 g
Ruggedly built. For good measure.
Advantages n Only one person required for most tasks n Easy to use n Measure distances in less than a second n Quick and easy calculation of areas n Safe and easy measurements with the help of a measuring
extension in inaccessible areas
28 www.hilti.com.au | T 131 29202 Measuring systems
Measuring systems
Laser range meterPD 42
Applications n Measuring distances of 0.05m to 200m with laser precision even
under the toughest outdoor conditions n Direct distance measurements, area, volume, Pythagoras and
many more calculations n Checking parallels and right angles with the MIN/MAX function n Measuring quickly and safely in places where access is difficult
Ordering
Product description Package Contents Item Number
Laser range meter PD 42 In cardboard box, with PDA 65 soft pouch, hand strap, PDA 51 target plate, 2 AA batteries and operating instructions.
00388215
Technical data
PD 42
Min. measuring distance 0.05 m
Max. measuring distance 200 m
Calculation function +, -, Area, Volume, Pythagoras (3x), Timer, Memory (30x), min/max, Painters area, Setting out
Laser 635 nm, Class 2 (IEC 825-1), Class II (FDA 21 CFR)
Accuracy ± 1 mm
IP protection class IP 54
Battery type 2 x AA
Operating temperature range -10 - 50 °C
Dimensions (LxWxH) 120 x 55 x 28 mm
Weight without batteries 200 g
Made to measure. Everywhere.
Advantages n Only one person required for most measuring tasks, even in
bright sunlight n Built-in optical sight for outdoor use n Graphical user interface with many functions n Save highly accurate measurements in memory - no need to
re-measure n Safe and easy measurements with the help of a measuring
extension in inaccessible areas
2
29www.hilti.com.au | T 131 292
Measuring systems
02 Measuring systems
Accessories
PD 4
PD 4
0
PD 4
2
Product description Item Number
Target plate PDA 50 To increase the measuring range outdoorsSize 130 x 120 mm
n n n 00282388
Target plate PDA 52 To increase the measuring range outdoorsSize 296 x 210 mm
n n n 00226879
Laser visibility glasses PUA 60 For improved visibility of the laser spot or line
n n n 00284988
Tool pouch PDA 64 For PD 4
n 00226880
Tool pouch PDA 65 For PD 40/42
n n 00226877
Measuring extension PDA 71 For comfortable measurements from the floor and from inaccessible places
n 00226878
Marker pen PUA 70 set For marking on all kind of building surfaces
n n n 00340806
30 www.hilti.com.au | T 131 29202 Measuring systems
Measuring systems
Point laserPMP 34
Applications n Plumbing, levelling, setting out right angle/inclines and
transferring measuring points n An interior range of up to 30 meters, quick exterior alignment n Mechanical installation: transfer pipe fastening points from floor
to ceiling n Steel construction: vertical alignment of steel columns n Drywall installation: setting out of drywall partitions at a perfect
right angle
Ordering
Product description Package Contents Item Number
Point laser PMP 34 PMP 34 point laser, soft pouch, 2 target plates, PMA 73 drywall adapter, 4 batteries and operating instructions.
00286135
Point laser PMP 34 kit PMP 34 point laser, soft pouch, PA 250 frame clamp, 2 target plates, PMA 71 wall mount, PMA 73 drywall adapter, PMA 74 magnetic bracket, 4 batteries, PMP 34 operating instructions, PMA operating instructions, producer certificate. Supplied in a Hilti toolbox.
00286141
Technical data
PMP 34
Laser functionality One plumb, One 90° laser beam
Laser 635 nm, Class 2 (IEC 825-1), Class II (FDA 21 CFR)
Accuracy ± 3 mm @ 10 m
IP protection class IP 54
Battery type 4 x “AA” alkaline
Operating temperature range -10 - 40 °C
Dimensions (LxWxH) 138 x 51 x 89 mm
Weight without batteries 700 g
Plumb bob, builder’s square and spirit level at the touch of a button.
Advantages n Two vertical measuring points, plumbing above and below n Two measuring points at a 90° angle n Horizontal alignment n Automatic self-levelling up to +/- 5°
2
31www.hilti.com.au | T 131 292
Measuring systems
02 Measuring systems
Point laserPMP 45
Applications n Setting out drywall tracks for partitioning n Transferring fastening points from floors to ceilings n Vertical alignment of windows and doors n Vertical alignment of steel and timber structures
Ordering
Product description Package Contents Item Number
Point laser PMP 45 Complete with soft pouch, 4 batteries, manufacturer’s certificate and operating instructions.
00411279
Technical data
PMP 45
Laser functionality Plumb, Square, Level, Align
Laser 620-690 nm, Class II
IP protection class IP 54
Battery type 4 x “AA” alkaline
Operating temperature range -10 - 50 °C
Dimensions (LxWxH) 107 x 65 x 96 mm
Weight without batteries 413 g
Plumb, square, level and align: the winner on points.
Advantages n Impact Protection System (IPS) for maximum durability n Plumb, square, level and align n 5 laser beams n Ideal shape and brightness of laser point n Fixed foot with built-in magnets for easy attachment to drywall
tracks n Compact and efficient design
32 www.hilti.com.au | T 131 29202 Measuring systems
Measuring systems
Line laserPML 32-R
Applications n Line laser for rapid and simple levelling and vertical aligning n Horizontal aligning of suspended ceilings or cable trays n Vertical aligning of pipe clamps n Horizontal and vertical alignment of tiles
Ordering
Product description Package Contents Item Number
Line laser PML 32-R PML 32-R line laser, PUA 60 laser visibility glasses, soft pouch, 2 target plates, 4 AA batteries and operating instructions.
00331454
Line laser PML 32-R kit PML 32-R line laser, PUA 60 laser visibility glasses, soft pouch, 2 target plates, 2 marking pencils, 4 AA batteries, PMA 71 wall mount, PMA 70 pipe adaptor, PRA 50 target plate and operating instructions. Supplied in a Hilti toolbox.
00331451
Line laser PML 32-R / PMA 30 PML 32-R line laser, PMA 30 laser receiver, PUA 60 laser visibility glasses, 2 soft pouches, 2 target plates, 6 AA batteries and operating instructions.
00381367
Technical data
PML 32-R
Laser functionality One horizontal line, One vertical line laser beam
Operating range with laser receiver
2 m - 30 m
Laser 635 nm, Class 2 (IEC 825-1), Class II (FDA 21 CFR)
IP protection class IP 54
Battery type 4 x “AA” alkaline or rechargeable NiMH batteries
Operating temperature range -10 - 40 °C
Dimensions (LxWxH) 137 x 51 x 89 mm
Weight without batteries 700 g
Always the right tool at hand.
Advantages n Easy, single button operation for all applications n Hands remain free for working along the precisely aligned
reference line n The PMA 30 laser receiver saves time by “catching” the laser
line and allowing use of the tool even in very bright conditions n Automatic self levelling system (± 5°) n The laser line blinks to warn the user when the tool is outside its
self levelling range for reliable results every time n Versatile accessories simplify levelling and aligning at various
heights
2
33www.hilti.com.au | T 131 292
Measuring systems
02 Measuring systems
Combi laserPMC 46
Applications n Transferring reference heights n Vertical alignment of pipes n Levelling electric sockets, cable trays and pipe installations n Levelling and aligning doors and windows n Setting out drywall tracks for partitioning n Transferring fastening points from floors to ceilings
Ordering
Product description Package Contents Item Number
Combi laser PMC 46 kit Complete with soft pouch, PMA 78 universal adapter, PMA 20 compact tripod, 4x AA batteries, manufacture’s certificate and operating instructions. Supplied in a Hilti toolbox.
00411210
PMC 46 kit + PMA 31 receiver combo Complete with soft pouch, PMA 31 receiver, PMA 78 universal adapter, PMA 20 compact tripod, 4x AA batteries, manufacture’s certificate and operating instructions. Supplied in a Hilti toolbox.
03468565
Combi laser PMC 46 (tool only) Complete with soft pouch, 4x AA batteries, manufacture’s certificate and operating instructions.
00411207
Combi laser PMC 46 (tool only) + PMA 78 + target plate combo
Complete with soft pouch, 4x AA batteries, PMA 78 universal adapter, target plate and operating instructions.
03473984
Technical data
PMC 46
Laser functionality Level, Align, Plumb, Square
Laser 620-690 nm, class II
IP protection class IP 54
Battery type 4 x “AA” alkaline
Operating temperature range -10 - 50 °C
Dimensions (LxWxH) 107 x 65 x 96 mm
Weight without batteries 413 g
Level, align, plumb and square: all in one.
Advantages n New (IPS) Impact Protection System, with rugged inner
pendulum housing n Offers the complete solution for measuring applications, with
everything required in one toolbox n Complete with an innovative universal adapter and compact
tripod for placing or mounting the tool wherever needed
34 www.hilti.com.au | T 131 29202 Measuring systems
Measuring systems
Accessories
PMP
34
PMP
45
PML
32-R
PMC
46
Product description Item Number
Laser receiver PMA 30 n 00002842
Laser receiver PMA 31 n 00411288
Target plate PMA 54 (mm) Enhances the visibility of the laser point
n n 00411289
Target plate PMA 50 (cm) kit Enhances the visibility of the laser point; centimeter scaling
n n 00286147
Target plate PRA 51 (cm/in) n n n n 00285416
2
35www.hilti.com.au | T 131 292
Measuring systems
02 Measuring systems
Accessories
PMP
34
PMP
45
PML
32-R
PMC
46
Product description Item Number
Universal adapter PMA 78 n n n n 00411286
Tripod PMA 20 n n n n 00411287
Pipe adapter PMA 70 For fixing the PML 32 or the PMP 34 on pipes (20 to 60 mm dia.) or on PUA 10 telescopic brace
n n 00378037
Wall mount PMA 71 For installing the PML 32 or the PMP 34 on a wall at any height or for use with PMA 70 pipe adapter and PUA 10 telescopic brace
n n 00378036
Magnetic bracket PMA 74 To fasten the tool on magnetic surfaces
n n n n 00286150
Drywall stand PMA 75 Simplifies the floor-to-ceiling alignment of drywall channels
n 00287176
Ceiling clamp PMA 76 For simple and fast fastening on the ceiling profile
n n n n 00272707
Telescopic brace PUA 10 For use with both PMA 71 wall mount and PMA 70 pipe adapter, adjustable length 1.35 to 2.8 m
n n n n 00378038
Laser visibility glasses PUA 60 For improved visibility of the laser spot or line
n n n n 00284988
Frame clamp PMA 25 n n n n 00272790
Marker pen PUA 70 set For marking on all kind of building surfaces
n n n n 00340806
Laser warning sign n n n n 03092084
36 www.hilti.com.au | T 131 29202 Measuring systems
Measuring systems
Rotating laserPRE 3
Applications n General levelling and setting out slopes n Excavation work n Transferring reference heights and meter marks n Formwork and pouring concrete n Checking heights
Ordering
Product description Package Contents Item Number
PRE 3 all-in-one combo PRE 3 rotating laser, PRA 84 battery pack, PRA 31 laser receiver, + PRA 80 laser receiver holder, PRA 85 mains adapter, PUA 20 tripod, PUA 50 levelling staff, PRA 78 slope adapter and PRA 81 height transfer device. Supplied in a Hilti toolbox.
03459237
PRE 3 complete kit + Slope adaptor PRE 3 rotating laser, PRA 84 battery pack, PRA 31 laser receiver, PRA 80 laser receiver holder, PRA 85 mains adapter, PUA 20 tripod, PUA 50 levelling staff and PRA 78 slope adapter. Supplied in a Hilti toolbox.
03455736
PRE 3 complete kit PRE 3 rotating laser, PRA 84 battery pack, PRA 31 laser receiver, PRA 80 laser receiver holder, PRA 85 mains adapter, PUA 20 tripod and PUA 50 levelling staff. Supplied in a Hilti toolbox.
03455735
Rotating laser PRE 3 PRE 3 rotating laser, PRA 84 battery pack, PRA 31 laser receiver, PRA 80 laser receiver holder and PRA 85 mains adapter. Supplied in a Hilti toolbox.
00211937
Technical data
PRE 3
Operating range with laser receiver
2 m - 400 m
Laser 635 nm, Class II
Accuracy (at 24°) ± 0.5 mm @ 10 m
Levelling system Fully automatic
Self levelling range ±5 °
IP protection class IP 56
Battery type Li-Ion
Operating temperature range -20 - 50 °C
Dimensions (LxWxH) 252 x 252 x 201 mm
Weight without batteries 2.4 kg
Fast, simple and rugged. For maximum efficiency outdoors.
Advantages n One button operation makes the tool extremely easy to use n Digital measurement faster and more accurate for checking
offsets n Li-ion battery and ability to charge during operation means no
down time and no need to buy new batteries n Unaffected by the sun and other light sources thanks to
PulsePower technology n Clever accessories that meet the needs of a whole range of
users
2
37www.hilti.com.au | T 131 292
Measuring systems
02 Measuring systems
Rotating laserPR 25 IF
Applications n Interior and exterior applications n Horizontal, vertical alignment and setting out inclines n Transferring right angles, stationary laser line for exact alignment n Applications for which traditional levelling tools, such as spirit
level, plumb bob or chalk line are used n Drywall installation, suspended ceiling, electrical and mechanical
installations n Building construction, civil engineering and steel construction
Ordering
Product description Package Contents Item Number
PR 25 IF complete kit PR 25 IF rotating laser, PRA 25 laser receiver, PRA 50 target plate, manufacturer’s certificate, operating instructions, PUA 20 Tripod, PUA 50 levelling staff and PRA 75 receiver holder. Supplied in a Hilti toolbox.
03457979
PR 25 IF + wall bracket combo PR 25 IF rotating laser, PRA 25 laser receiver, PRA 50 target plate, manufacturer’s certificate, operating instructions and PRA 70 Wall mount. Supplied in a Hilti toolbox.
03441096
Rotating laser PR 25 IF PR 25 IF rotating laser, PRA 25 laser receiver, PRA 50 target plate, manufacturer’s certificate and operating instructions. Supplied in a Hilti toolbox.
00286210
Technical data
PR 25 IF
Operating range with laser receiver
2 m - 300 m
Laser 635 nm, Class 3R (IEC 825-1), Class IIIa (FDA 21 CFR)
Accuracy (at 24°) ± 0.75 mm @ 10 m
Levelling system Fully automatic
Self levelling range ±5 °
IP protection class IP 56
Battery type 3 “D” alkaline batteries or recharg. battery pack
Operating temperature range -20 - 50 °C
Dimensions (LxWxH) 186 x 186 x 213 mm
Weight without batteries 2.4 kg
Visibly superior all round.
Advantages n Auto Alignment System quickly aligns the laser beam by the
touch of a button n Remote control and electronic receiver in one device n Unique levelling system helps ensure the highest accuracy every
time n 4 handle design for superior tool protection n A fully enclosed rotating head for added protection n PR 25 IF is weather and dust resistant with an IP 56 protection
code
38 www.hilti.com.au | T 131 29202 Measuring systems
Measuring systems
Rotating laserPR 35
Applications n Levelling (transfering heights, pouring concrete, excavation) n Aligning (transfering building lines, aligning columns, facades) n Grading (ramps, parking lots, pipes) n Squaring (walls, partitions)
Ordering
Product description Package Contents Item Number
Rotating laser PR 35 PR 35 rotating laser, PRA 35 remote control / laser receiver, PRA 84 Li-Ion battery pack, PRA 80 laser receiver holder, PRA 85 mains adapter, PRA 50 target plate, 2x “AA” alkaline batteries and operating instructions. Supplied in a Hilti toolbox.
00426381
Technical data
PR 35
Operating range with laser receiver
2 m - 300 m
Laser 635 nm, Class II
Accuracy (at 24°) ±0.75 mm @ 10 m
Levelling system Fully automatic
Self levelling range ±5 °
IP Protection class IP 56
Battery type Li-Ion
Operating temperature range -20 - 50 °C
Dimensions (LxWxH) 252 x 252 x 209 mm
Weight without batteries 2.4 kg
Versatility that works for you.
Advantages n Digital measurement - read offsets from the PRA 35 remote
control / laser receiver n Auto alignment lets the tool align the beam for you n Digital slope display simplifies grading tasks n Surveillance mode - the tool checks accuracy at regular intervals n Remote control with 100m operating range - makes alignment a
one person task
2
39www.hilti.com.au | T 131 292
Measuring systems
02 Measuring systems
Rotating LaserPRI 2
Applications n Specially designed for interior applications n Alignment in the horizontal, vertical and inclined planes n Transferring heights n Setting out right angles
Ordering
Product description Package Contents Item Number
Rotating laser PRI 2 PRI 2 rotating laser, PRA 2 remote control, PRA 50 target plate and operating instructions. Supplied in a Hilti toolbox.
00331411
Technical data
PRI 2
Operating range with laser receiver
2 m - 300 m
Laser 635 nm, Class 3R (IEC 825-1), Class IIIa (FDA 21 CFR)
Accuracy (at 24°) ± 1 mm @ 10 m
Levelling system Fully automatic
Self levelling range ±5 °
IP protection class IP 54
Battery type 2 “D” alkaline batteries or re-charg. battery pack
Operating temperature range -20 - 50 °C
Dimensions (LxWxH) 188 x 188 x 194 mm
Weight without batteries 1.55 kg
Interior finishing made easy.
Advantages n Quick, easy and accurate results n The rotating laser beam can be switched at any time, by infrared
remote control, to a stationary laser line that can be shifted in the horizontal or vertical planes
n 360° remote control for easy, convenient operation n Robustly built for jobsite use, especially for all indoor
applications n Automatic shock warning and cut-out when knocked off level by
an impact or excessive vibration, for reliable results at all times n The finely adjustable PRA 70 wall bracket further simplifies
countless levelling and alignment applications
40 www.hilti.com.au | T 131 29202 Measuring systems
Measuring systems
Rotating laserPR 26
Applications n Levelling suspended ceilings n Positioning drywall tracks n Aligning raised floors n Installation of pipes and cable trays n Aligning formwork
Ordering
Product description Package Contents Item Number
Rotating laser PR 26 PR 26 rotating laser, rechargeable battery with charger, PRA 26 laser receiver, 2 batteries (type AA, alkaline), PRA 54 target plate and operating instructions. Supplied in a Hilti toolbox.
00388029
PR 26 + PRA 70 wall mount bracket combo
PR 26 rotating laser, rechargeable battery with charger, PRA 26 laser receiver, 2 batteries (type AA, alkaline), PRA 54 target plate, PRA 70 wall mount bracket and operating instructions. Supplied in a Hilti toolbox.
03445410
PR 26 complete kit PR 26 rotating laser, rechargeable battery with charger, PRA 26 laser receiver, 2 batteries (type AA, alkaline), PRA 75 laser receiver holder, PUA 20 tripod, PUA 50 staff, PRA 54 target plate and operating instructions. Supplied in a Hilti toolbox.
03457978
Technical data
PR 26
Operating range with laser receiver
2 m - 300 m
Laser 532 nm, Class 3R
Accuracy (at 24°) ± 1 mm @ 10 m
Levelling system Self-levelling
Self levelling range ±5 °
IP protection class IP 56
Battery type 3 “D” alkaline batteries or recharg. battery pack
Operating temperature range -20 - 45 °C
Dimensions (LxWxH) 186 x 186 x 213 mm
Weight without batteries 2.4 kg
Green beam - the new colour of visibility.
Advantages n Green lasers are up to 4 times brighter than conventional lasers
and thus ensure significantly better visibility n Rechargeable battery pack comes standard with every tool
(NiMh) n Perfect for highly luminous environments and laying out
distances n PRA 26 remote control and electronic receiver in one device
2
41www.hilti.com.au | T 131 292
Measuring systems
02 Measuring systems
Accessories
PRE
3
PR 2
5 IF
PR 3
5
PRI 2
PR 2
6
Product description Item Number
Laser receiver PRA 31 For locating the rotating laser beam easily and accurately within an area of 300m in diameter (metric)
n n 00426386
Laser receiver holder PRA 80 For easy attachment of the laser receiver to a levelling staff
n n 00360058
Height transfer device PRA 81 (mm) For transferring meter marks with a built-in measuring tape, extendable up to 1m. To be used in conjunction with PRA 31, PRA 35 or PRA 38
n n 00368627
Laser receiver holder PRA 75 For attaching the PRA 20 and PRA 25 detector to the PA 951 measuring staff or other staff
n n 00282837
Remote control / laser receiver PRA 35 For locating the rotating laser beam easily and accurately within an area of 300m in diameter (metric) and for remote control of the PR 35
n 00426384
Remote control PRA 2 Remote maintenance of the PRI 2 up to 30 m
n 00331418
Laser receiver PRA 22 Use the full potential of your rotating lasers and get the highest versatility for all the applications
n 00331419
Laser receiver holder PRA 77 For use with PRA 22 laser reciever
n 00331420
Remote control / laser receiver PRA 26 n 00388031
Remote control / laser receiver PRA 25 n 00286212
Target plate PRA 51 (cm/in) n n 00285416
Target plate PRA 54 (cm/in) n 00226976
42 www.hilti.com.au | T 131 29202 Measuring systems
Measuring systems
Accessories
PRE
3
PR 2
5 IF
PR 3
5
PRI 2
PR 2
6
Product description Item Number
Battery pack PRA 84 Li-Ion CPC battery for PRE 3 rotating laser
n n 00360055
Mains adapter PRA 85 Adapter for recharging the PRA 84 battery pack (in the tool or externally)
n n 00360056
Car battery plug PRA 86 For recharging the PRA 84 battery in a motor vehicle
n n 00360057
Batter-board adapter PRA 750 n n n 00435441
Batter-board receiver holder PRA 751 n n n 00435442
Battery charging set rotating lasers(For PR 25/ 25 IF/ 26 supply with PRA 801 and PUA 80)
n n 03427995
Battery pack PRA 801 Battery pack includes battery charger AD-7C, battery NiMH, battery holder, operating instructions
n n 00282834
Battery charger PUA 80 Replacement or additional charger for charging single battery pack
n n 00377458
Facade adapter PRA 760 n 00435439
Vertical angle PRA 770 n 00435440
Wall mount PRA 70 (cm) Mount the PR 26, PR 25 IF, PR 25, PR 20 to wall, tripod, column or stud
n n n n 00285314
Marker pen PUA 70 set For marking on all kind of building surfaces
n n n n n 00340806
Laser warning sign n n n n n 03092084
2
43www.hilti.com.au | T 131 292
Measuring systems
02 Measuring systems
Accessories
PRE
3
PR 2
5 IF
PR 3
5
PRI 2
PR 2
6
Product description Item Number
Slope calculator PRA 52 Calculating a slope in %, grade, height is now easier than everPocket-size aid for easy setting out on slopes
n n n n n 00282838
Slope adapter PRA 78 For setting PRE 3 or PR 20 / 25 / 26 to inclinations of up to 60%
n n n n 00360059
Telescopic staff PA 951 (cm) Length 1.25 m - 5 m, high-grade fiberglass reinforced plastic, electrically non-conductive, suitable for outdoor applications, screw mounting point for attaching the PA 350 laser receiver directly to the rod for measuring
n n n n n 00338129
Measuring rod PUA 50 (cm) Aluminium, adjustable in height from 0.88 to 4 m; magnetic nail holder at the base of the staff for setting nails into formwork
n n n n n 00400935
Measuring rod PUA 55 (cm) Aluminium, adjustable in height from 1.31 to 2.42 m
n n n n n 00435443
Tripod PUA 20 kit PUA 20 tripod with 5/8” thread, adjustable in height from 1.06 to 1.70 m, metal tripod head, self-locking mechanism for the legs and PUA 50 aluminium measuring staff, adjustable to 4m, measuring scale in cm
n n n n n 00400936
Tripod PUA 20 PUA 20 tripod with 5/8” thread, adjustable in height from 1.06 to 1.70 m, metal tripod head, self-locking mechanism for the legs
n n n n n 00400934
Crank tripod PA 921 The PA 921 is the type of tripod most frequently encountered in interior finishing perfect for transferring benchmarks (datum marks). Height adjustable crank tripod (0.73 to 1.63 m) with 5/8” thread, built-in bubble level for quick and easy setup
n n n n n 00378663
Crank tripod PA 931 (cm) Height adjustable crank tripod (0.86 to 2.87 m) with 5/8” thread, integrated measuring scale in mm allows accurate tool positioning
n n n n n 00315998
Tripod bag PUA 40 The perfect bag to carry tripods and levelling staff
n n n n n 00377847
44 www.hilti.com.au | T 131 29202 Measuring systems
Measuring systems
TranspointerPX 10
Applications n Finding the drill bit exit point or transferring the starting point
before drilling through-holes in floors or walls with diamond coring equipment or rotary hammer drills on concrete or masonry
n Wall thickness measurement for easy selection of the required drill or core bit length
Ordering
Product description Package Contents Item Number
Transpointer PX 10 PX 10T transmitter, PX 10R receiver, two PDA 60 hand straps, PUA 91 adhesive putty, PUA 92 adhesive strips, two 9v alkaline batteries and operating instructions. Supplied in a Hilti toolbox.
00273124
Transpointer PX 10 kit PX 10T transmitter, PX 10R receiver, two PDA 60 hand straps, PUA 91 adhesive putty, PUA 92 adhesive strips, two 9v alkaline batteries, PX 10 operating instructions, PUA 70 marker and PXA 70 slope adapter. Supplied in a Hilti toolbox.
00273126
Technical data
PX 10
Accuracy Positioning accuracy: ± 2mm @ 200mm wall thickness,
Thickness measuring accuracy: ±5% of wall thickness
Measuring range 5 cm - 135 cm
Operating temperature range -20 - 55 °C
Operation time with alkaline battery
17 h
Battery type 1 x 9v
Dimensions PX10 (LxWxH) PX10T: 160 x 95 x 33 mmPX10R: 210 x 95 x 33 mm
Weight PX10T 240 g
Weight PX10R 275 g
Point through floors and walls. Reliable through-holes thanks to magnetic field detection.
Advantages n Allows drilling to be carried out quickly, efficiently and safely n No need for time consuming procedures such as drilling pilot
holes, measuring out manually or “trial and error” n Overhead drilling becomes unnecessary n Positions can be transposed through floors and walls n Direction arrows for easy, user friendly operation n The unique slope adapter allows the drill bit exit point or starting
point to be determined for a given angle or, alternatively, the required drilling angle to be determined for a given exit point and starting point
2
45www.hilti.com.au | T 131 292
Measuring systems
02 Measuring systems
Accessories
PX 1
0
Product description Item Number
Slope adapter PXA 70
n
00273130
Adhesive putty PUA 91 n 00273131
Adhesive strip PUA 92 n 00273132
46 www.hilti.com.au | T 131 29202 Measuring systems
Measuring systems
Rebar detectorPS 35
Applications n Locating reinforcement, copper or aluminium pipes in concrete n Locating copper or aluminium pipes in brick walls n Determining the position and depth of existing rebars for
post-installed rebar connections n Checking concrete cover over reinforcement for trouble-free
anchor setting
Ordering
Product description Package Contents Item Number
PS 35 rebar detector PS 35 rebar detector, hand strap, 4x AAA batteries, pouch, marker and operating instructions. Supplied in a Hilti toolbox.
00407961
PS 35 + PX 10 kit combo PS 35 rebar detector, PX 10 kit and operating instructions. Supplied in a Hilti toolbox.
03469711
Technical data
PS 35
Accuracy of depth measurement for rebar
±3mm - ±11 mm
Materials detected Ferrous, non-ferrous objects
Max. detection depth 120 mm
IP protection class IP 54
Battery type Alkaline (AAA)
Operating temperature range -15 - 50 °C
Dimensions (LxWxH) 230 x 100 x 45 mm
Weight without batteries 450 g
The best way to avoid rebar hits.
Advantages n Avoiding hitting rebar increases drill bit lifetime n Avoids damage to rebar, copper and aluminium pipes when
drilling n High depth measurement precision for rebar n Simple, user-friendly operation n Clear indication of detection with red/green LED n Ruggedly built for job site use
2
47www.hilti.com.au | T 131 292
Measuring systems
02 Measuring systems
FerroscanPS 200
Applications n Verification of reinforcement: locate rebar when plans are not
at hand, for acceptance inspections, before structural repair or change of loads on a structure
n Verification of concrete cover over reinforcement: obtain concrete cover information over large areas for acceptance inspections, before renovation or for quality control
n Avoiding rebar hits: Avoid cutting through critical reinforcement or costly rebar hits
n Coring and hammer drilling without costly rebar hits and avoidance of damage caused by cutting through structurally significant reinforcement
Technical data
PS 200
Storage memory(Scanner)
9 Image scans plus up to 30m (100ft) Quickscan recordings
Storage memory(Monitor and scanner)
1000 Image scans or 500 Quickscans plus 1h Voice
Max. detection depth 160 mm (at 36 mm rebar diameter)
Operating temperature range -10 - 50 °C
Monitor dimensions 264 mm x 57 mm x 152 mm
Scanner dimensions 260 mm x 132 mm x 132 mm
Monitor weight 1.4 kg
Scanner weight (incl. battery) 1.4 kg
The complete system for rebar detection, cover measurement and rebar diameter estimation.
Advantages n Quick, easy scanning of large areas n Individual scans over lengths of up to 30m n Immediately viewable true image of reinforcement shown on the
monitor n Data transfer from scanner by infrared link for monitor viewing n Cordless scanner for maximum freedom of movement n Professional data evaluation and management software n Engineering support services available
Ordering
Product description Package Contents Item Number
Ferroscan system PS 200 Comprising: PS 200 S scanner, hand strap and soft pouch, PS 200 M monitor, soft pouch and memory card, headset, 2 battery packs, 2 battery chargers, carry belt, reference grid set, adhesive tape, marker set, USB data cable, PC-software on CD-ROM and operating instructions. Supplied in a Hilti toolbox.
00377638
Scanner PS 200 S kit PS 200 S scanner, PS 200 M monitor, PSA 94 memory card, headset, 2 battery packs, 2 battery chargers, 10 (2x5) reference grid sets, data cable, soft pouches, adhesive tape, marker set, hand strap and PC software. Supplied in a Hilti toolbox.
00237293
NO COSTS
MANUFACTURERS WARRANTY
REPAIR COST LIMIT
LIFETIME SERVICE
1 Year up to
Lifetime Lifetime
Recommended