View
4
Download
0
Category
Preview:
Citation preview
A Mini Crane HireCompany Limited
www.aminicranehire.co.uk
MINICRANESGLAZINGROBOTSCRANESVACUUMLIFTERSMINICRANESGLAZINGROBOTSCRANESVACUUMLIFTERSMINICRANESGLAZINGROBOTS
MINICRANESGLAZINGROBOTSCRANESVACUUMLIFTERSMINICRANESGLAZINGROBOTSCRANESVACUUMLIFTERSMINICRANESGLAZINGROBOTS
MINICRANESGLAZINGROBOTSCRANESVACUUMLIFTERSMINICRANESGLAZINGROBOTSCRANESVACUUMLIFTERSMINICRANESGLAZINGROBOTS
MINI CRANE
HIRESpecialists in
GlassLifting
A Mini Crane HireCompany Limited
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●2
About us...
A Mini Crane Hire Company Limited was incorporated in July 2008 and offer National Coverage.
We have established an experienced, highly driven, dedicated team with a team focus on Customer Service, Engineering/Retail knowhow, Safety and Training. We also offer bespoke Project Management.
“Contract Lifts”
It is our aim to be more than just a rental company. We use our experience to offer our unique lifting solutions. Our design service means you can pass on responsibility of planning and lift to us. Our experts will be happy to advise on the best-fit solution for all types of work, so please contact us as early as possible to discuss your needs ensuring best practice for both short and long term projects.Our operatives are CPCS qualified: Appointed Person, Lifting Supervisor, Slinger Signaller and Compact Crane Operative.
“Hire” We offer a full range of equipment for Hire:Innovative range of Mini Spider CranesGlass Vacuum Lifters - supported by a comprehensive range of Valla, Mini and Spider Cranes for lifting, carrying and placing glass panelsCranes - Truck Mounted Crane, City Cranes, Pick and Carry Floor CranesGlazing Robots - Complete your Glass Installation project efficiently and safely
“Accessories”
“Environment”
“Training”
Familiarisation Training can be provided at our training facilities or on-site for Vacuum Lifters, Floor Cranes and Smart lifts.CPCS/NPORS Training can also be arranged for A66 Compact Crane, A62 Crane Supervisor, A40 Slinger Signaller and A61 Appointed Person - Courses vary in duration, based on the experience of the operative.Training we believe is not just about gaining a card, it is about training to the correct standard. Lifting Operations and Construction Sites are dangerous and we would like to ensure everyone arrives home safe at the end of the working day.
“Service and Testing”
We provide Service and Testing for Mini Cranes, Vacuum Lifters and other lifting equipment as per manufacturer’s guidelines, to meet with lifting equipment regualtions 1998 (LOLER), BS 7121 and (PUWER)
Glass TransportationMinifor Winch, Stillages, Man Chain WinchHand Vacuum, Glass Suction Lifters
Sutbusta - Exhaust particulate filter system - 3 sizes available on requestHealth and Safety legislation requires that diesel engine exhaust emissions are controlledwhenever they could create a health hazard. This is generally when diesel engines are run withinan enclosed environment and therefore ventilation is restricted or alternatively our cranes canbe run off a 3 phase supply eliminating emissions.
A Mini Crane HireCompany Limited
Full Contract Lifting Facility
Any size of crane
Appointed Person
Lift Plans
Method statement / Risk assesment
Lift Supervisor
Lifting Operation Management
Full compilance with LOLER
Fully trained personel
Our Cranes - Contract Lifting
3
Contract LiftingAll our contract lifts are carried out in line with the British Standard Code of Practice for safe use of cranes BS-7121 & BS-EN13000. We provide fully trained and highly experienced operatives to carry out all Contract Lifts and take pride in the Risk Assessments and Method Statements / Lift plans that we produce.
A number of our operatives hold more than one accreditation, meaning that we always aim to offer the customer the most cost effective solution to a project for standard lifting operations.
Health and Safety is a priority to A Mini Crane Hire and due to this, we ensure all operatives are trained to the highest of standards.
�
�
�
�
�
�
�
�
�
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited
4
MC174 CRMMINI CRANES
Maeda MC174 Sets the standard that other mini cranes try to achieve. It’s super slim width of 590mm coupled with its 1.72 ton lifting capacity make it absolutely unparalleled. This fantastic machine also retains all the other benefits of the machines in the Maeda range.
More Images...
Features at a glance...
• 1.72 Ton Max Capacity
• 5.5m Max Working Height
• Super Slim Body Width (590mm)
• Low Ground Pressure
• Manoeuvrability & Stability
• Programmable Moment Limiter
• Hydrostatic Transmission
• Tilt Sensor / Alarm
• Rubber Tracks
• High Speed Winch
• 2 Travel Speeds
• Remote Control
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
1.55m 2.80m 3.95m 5.10m
(5.5m)
3335
mm
Max
(251
5mm
Min
)
3060mm Max (1945mm Min)
2885mm Max (1850mm Min)
55° 55°
50°50°
180mm
2000mm
1044mm
590mm
1300mm
1345mm
A Mini Crane HireCompany Limited Mini Cranes, Huge Possibilities...
Specifications
5
CapacityWorking Radius
Lifting HeightDimensions
WeightHook Speed
Hoist RopeTelescopic System
Boom Hoist SystemSlew System
Outrigger System
Traction System
Engine
Standard Equipment
Optional Equipment
MaximumMaximumMaximum
MC174 CRMMC174 CRM
MaximumType
Boom lengthTelescoping speed
Boom TypeHoist angle / speedSlew angle / speed
Type
Maximum extendeddimensions
DriveTravel speed
GradabilityGround length x width
Ground pressureModel
TypeRated output
Starting methodFuel tank capacity
Cable remote control, overwind protection, hydraulic safety valves, working light,hour-meter, 4-fall hook block, black rubber tracks, moment limiter, EMO switch,level and working status lamp.White rubber tracks, single fall hook, two fall hook, searcher hook and radioremote control.
1.72t x 1m5.17m x 220kg5.5m x 770kg2000mm x 590mm x 1300mm1290kg10.9m / min. (4 falls, 3rd layer)IWRC 6 x Fi (29) Ø 6mm x 35m1.83m - 5.45m3.62m / 15 sec.Fully automatic 4 section pentagonal telescopic boom3° - 77° / 12 sec.360° continuous / 2.0 rpm4 Multi position box type. Hydraulic cylinders with lock valves(Length) 3335mm x (Front) 3060mmx (Rear) 2885mmHydrostatic type, stepless forward and reverse0 - 3.3km/h20°1044mm x 180mm (Track dimensions)0.34 kgf / cm2Mitsubishi GM401LE1 Cylinder Air Cooled, Petrol or LPG option6.6kw / 1800 rpmElectricPetrol / 6L
Total rated load Outriggers at Maximum position 1.83m boom 2.97m boom 4.21m boom 5.45m boom
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
<1.01.301.55
172013201090
<1.01.301.502.002.502.69
172013201120820670580
<1.31.502.002.503.003.503.93
13201120820670530420370
<1.7 or2.002.502.803.003.504.004.505.17
770700660580530410330270220
Total rated load Outriggers at any other position 1.83m boom 2.97m boom 4.21m boom 5.45m boom
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
<1.01.301.55
1220940790
<1.01.301.502.002.502.69
1220940810600390310
<1.31.502.002.503.003.503.93
940810600390300220180
<1.7 2.002.502.803.003.504.004.505.17
720600390330300220180140100
Maximum Reach Below Ground Level Four Fall Two Fall Single Fall
7m 14m 28m
Working Range Diagram
Working radius (m)
The Working Range Chart does not take into account boom deflection under load.
Dimensions
Diagram shows outriggers at
maximum position
MINI CRANES
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
Maintenance WorkGeneral Lifting
A Mini Crane HireCompany Limited
6
MC285 CRM(E)
Maeda MC285 The MC285 boxes way above its weight with a massive 2.82 ton lifting capacity while measuring just 750mm wide when stowed. Its slim body is able to fit through most doorways allowing access to areas previously inaccessible to standard cranes. The MC285 has proven to be one of the most popular models of mini crane and is used in many varied applications.
Features at a glance...
• 2.82 Ton Max Capacity
• 8.7m Max Working Height
• Slim Body Width (750mm)
• Low Ground Pressure
• Manoeuvrability & Stability
• Programmable Moment Limiter
• Hydrostatic Transmission
• Tilt Sensor / Alarm
• Rubber Tracks
• Hydraulic Disc Brake
• Remote Control
More Images...
Restricted AccessGlazing Railway Maintenance
MINI CRANES
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited Mini Cranes, Huge Possibilities...
Specifications
7
CapacityWorking Radius
Lifting HeightDimensions
Weight
Hook SpeedSingle Line Speed
Hoist RopeTelescopic System
Boom Hoist SystemSlew System
Outrigger System
Traction System
Engine
Electric Motor(Optional)
Standard Equipment
Optional Equipment
MaximumMaximumMaximum
MC285 CRMMC285 CRME
MC285 CRMMC285 CRME
MaximumMaximum
TypeBoom Length
Telescoping SpeedBoom Type
Hoist angle / speedSlew angle / speed
Type
Maximum extendeddimensions
DriveTravel speed
GradabilityGround length x width
Ground pressureModel
TypeRated output
Starting methodFuel tank capacity
TypeSize
Working light, hour-meter, 4-fall hook block, black rubber tracks, moment limiter, hydraulic safety valves, level, wire rope latch, machine body inclination alarm,EMO switch, working status lamp, overwind protection and cable remote control.White rubber tracks, single fall hook, two fall hook, searcher hook and radio remote control.
2.82t x 1.4m8.205m x 150kg8.7m x 550kg2715mm x 750mm x 1440mm3285mm x 750mm x 1440mm1770kg1950kg8m / min. (4 falls, 3rd layer)32m / min. (3rd layer)IWRC 6 x Fi (29) Ø 7mm x 48m2.535m - 8,575m6.04m / 22 sec.Fully automatic 5 section pentagonal telescopic boom0° - 80° / 14 sec.360° continuous / 1.0 rpm4 Multi position box type. Hydraulic cylinders with lock valves.(Length) 4580mm x (Front) 4530mmx (Rear) 3810mmHydrostatic type, stepless forward and reverse0 - 2.2km/h20°975mm x 200mm (Track dimensions)0.45 kgf / cm2 (0.50 kgf / cm2 CRME)Yanmar 2TNE68-MB2 Cylinder water cooled diesel6.57kw / 2600 rpmElectricDiesel / 12LFully enclosed fan cooled motor5.5 Kw 4P 380V
Total rated load Outriggers at Maximum position 2.53m/4.075m boom 5.575m boom 7.075m boom 8.575m boom
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
<1.41.52.02.53.03.5
3.705
28202520192015701220970920
<3.03.54.04.55.0
5.205
1220970780630530530
<3.64.04.55.05.56.06.5
6.705
820740580480430380350330
<4.04.55.05.56.06.57.07.58.0
8.205
550400340300270230200180150150
Total rated load Outriggers at any other position
Maximum Reach Below Ground Level Four Fall Two Fall Single Fall
10.10m 20.20m 40.40m
Working Range Diagram
Working radius (m)
The Working Range Chart does not take into account boom deflection under load.
Dimensions
Diagram shows outriggers at
maximum position
2.53m/4.075m boom 5.575m boom 7.075m boom 8.575m boom
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
<1.52.02.53.03.5
3.705
17201070630520430350
<3.03.54.04.55.0
5.205
510410330280230200
<3.64.04.55.05.56.06.5
6.705
400330280230180160150140
<4.04.55.05.56.06.57.07.58.0
8.205
330280230180160150100807060
975mm
1480mm
4580mm Max (3035mm Min)
4530
mm
Max
(231
0mm
Min
)
3810
mm
Max
(200
0mm
Min
)
MINI CRANES
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited
8
MC305-2 CRM(E)
Maeda MC305-2 The MC305-2 is the first of the “ride on” Maeda mini cranes and is extremely powerful for its small stature. Up to 2.98 tonnes of lifting power from a machine only 1280mm wide.
Features at a glance...
• 2.98 Ton Max Capacity
• 12.52m Max Working Height
• Energy Saving System
• Sheaves Protected Inside Boom
• Variable (Hi/Lo) Travel Speeds
• Programmable Moment Limiter
• Hydrostatic Transmission
• Centralised Controls
• 4 Fall / 2 Fall Hook Block
• Automatic Hook Stowage System
• Tilt Sensor / Alarm
• Powerful Two Speed Winch
• Hydraulic Disc Brake
• Remote Control
• Outrigger Interlock System
More Images...
Uneven Ground General LiftingGlazing Steel ErectingInstallations
MINI CRANES
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited Mini Cranes, Huge Possibilities...
Specifications
9
CapacityWorking Radius
Lifting HeightDimensions
Weight
Hook SpeedSingle Line Speed
Hoist RopeTelescopic System
Boom Hoist SystemSlew System
Outrigger System
Traction System
Engine
Electric Motor(Optional)
Standard Equipment
Optional Equipment
MaximumMaximumMaximum
MC305 CRM(E)MC305 CRM
MC305 CRMEMaximumMaximum
TypeBoom Length
Telescoping SpeedBoom Type
Hoist angle / speedSlew angle / speed
TypeMaximum extended
dimensionsDrive
Travel speedGradability
Ground length x widthGround pressure
ModelType
Rated outputStarting method
Fuel tank capacityTypeSize
Overwind protection, hydraulic safety valves, wire rope latch level, machine body inclination alarm, EMO switch, travel lock lever, outrigger interlock device,moment limiter, working status lamp, hour-meter, 4-fall / 2-fall hook block, blackrubber tracks and cable remote control.Radio remote control, white rubber tracks, single fall hook, searcher hook.
2.98t x 2.5m12.16m x 260kg12.52 x 790kg4285mm x 1280mm x 1695mm3900kg4040kg13.5 / min. (4 falls, 4th layer)54m / min. (4th layer)IWRC 6 x WS (26) Ø 8mm x 73m3.695m - 12.485m8.79m / 38 sec 26 sec.Fully automatic 5 section pentagonal telescopic boom0° - 80° / 21 sec. (14.5 sec.)360° continuous / 2.4 rpm (1.7 rpm)Extension and set-up by hydraulic cylinders.(Length) 4888mm x (Front) 4504mmx (Rear) 4396mmHydraulic motor driven, stepless speed changer0 - 2.8km/h (1.3km/h)23°1750mm x 300mm (Track dimensions)0.37 kgf / cm2 (0.38 kgf / cm2 CRME)Yanmar 3TNV763 Cylinder water cooled diesel15.2kw / 2500 rpmElectricDiesel / 40LFully enclosed fan cooled motor5.5 Kw 4P 380V
Total rated load Outriggers at Maximum position 3.7m/5.945m boom 8.145m boom 10.315m boom 12.485m boom
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
<2.53
3.54
4.55
5.62
2980239019901710149013401160
2.73
3.54
4.55
5.567
7.82
227021201680144012601110990880730630
44.556789
9.99
1080985880770670570500435
<4.556789
1011
12.16
790660520430380340310280260
Total rated load Outriggers at Middle position
Working radius (m)The Working Range Chart does not take into account boom deflection under load.
Working Range Diagram
Dimensions
Diagram shows outriggers at
maximum position
3.7m/5.945m boom 8.145m boom 10.315m boom 12.485m boom
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
<2.53
3.54
4.55
298023601960168013801140
2.7
33.54
4.55
5.5
6
7
7.82
227020901680142012401070
950
800
610
520
44.556789
9.99
1060950860750630490410350
<4.556789
1011
12.16
780650500410360320
290
260250
Total rated load Outriggers at Minimum position 3.7m/5.945m boom 8.145m boom 10.315m boom 12.485m boom
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
<2.53
3.54
4.55
5.62
29802350180014301140950790
2.73
3.54
4.55
5.567
7.82
22702090168013701120910790670510430
44.556789
9.99
1060950860680530420340300
<4.556789
1011
12.16
780650500410360320290240210
Maximum Reach Below Ground Level Four Fall Two Fall Single Fall
16.09m 32.18m 64.36m
1280mm
4285mm
1750mm1695m
m300mm
2170mm
0
1
2
3
4
5
6
7
89
10
11
13
14
12
1 2 3 4 5 6 7 8 9 10 11 12 13
80º70º
60º
50º
40º
30º
20º
10º
0º
12.52m
1280mm
4504mm
3370mm
4888mm Max(4592mm Mid, 4291mm Min)
60º
50º60º
50º
4504
mm
Max
(411
0mm
Mid
, 371
2mm
Min
)
4396
mm
Max
(394
1mm
Mid
, 347
7mm
Min
)
5.62 950
MINI CRANES
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited
10
MC405 CRM(E)
Maeda MC405 The MC405 is the first of the Maeda range mini cranes with an outstanding3.83 tonnes of lifting capacity. The optional fly jib increases the already impressive working range even further. This fantastic model also has a unique pick and carry feature of up to 500kg, width 1380mm.
Timber Frame Work Uneven GroundRestricted AccessPick and Carry
Features at a glance...
• 3.83 Ton Max Capacity
• 16.8m Max Working Height
• 20.7m (MWH) with Optional Fly Jib
• 500kg Pick & Carry Duty
• Energy Saving System
• Sheaves Protected Inside Boom
• Variable (Hi/Lo) Travel Speeds
• Programmable Moment Limiter
• Hydrostatic Transmission
• Centralised Controls
• 4 Fall / 2 Fall Hook Block
• Automatic Hook Stowage System
• Tilt Sensor / Alarm
• Powerful Two Speed Winch
• Hydraulic Disc Brake
• Remote Control
• Outrigger Interlock System
More Images...
MINI CRANES
Glazing
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited Mini Cranes, Huge Possibilities...
Specifications
11
CapacityWorking Radius
Lifting HeightDimensions
Weight
Hook SpeedSingle Line Speed
Hoist RopeTelescopic System
Boom Hoist SystemSlew System
Outrigger System
Traction System
Engine
Electric Motor(Optional)
Standard Equipment
Optional Equipment
MaximumMaximumMaximum
MC405 CRM(E)MC405 CRM
MC405 CRMEMaximumMaximum
TypeBoom Length
Telescoping SpeedBoom Type
Hoist angle / speedSlew angle / speed
TypeMaximum extended
dimensionsDrive
Travel speedGradability
Ground length x widthGround pressure
ModelType
Rated outputStarting method
Fuel tank capacityTypeSize
Overwind protection, hydraulic safety valves, wire rope latch level, machine body inclination alarm, EMO switch, travel lock lever, outrigger interlock device,moment limiter, working status lamp, hour-meter, 4-fall / 2-fall hook block, blackrubber tracks and cable remote control.Radio remote control, white rubber tracks, single fall hook, searcher hook and fly jib.
3.83t x 2.7m16.0m x 210kg16.8m x 1130kg (20.7m x 520kg with Fly-Jib)4980mm x 1380mm x 1980mm5600kg5750kg18m / min. (4 falls, 4th layer)72m / min. (4th layer)IWRC 6 x WS (26) Ø 8mm x 92m4.735m - 16.475m11.7m / 54.2 sec (41.3 sec)Fully automatic 5 section pentagonal telescopic boom0° - 80° / 24.5 sec. (17 sec.)360° continuous / 2.1 rpm (2.5 rpm)Extension and set-up by hydraulic cylinders.(Length) 5786mm x (Front) 5118mmx (Rear) 5520mmHydraulic motor driven, stepless speed changer0 - 3.3km/h20°1720mm x 320mm (Track dimensions)0.50 kgf / cm2 (0.52 kgf / cm2 CRME)Yanmar 3TNV88-BPMB3 Cylinder water cooled diesel21.4kw / 2400 rpmElectricDiesel / 60LFully enclosed fan cooled motor7.5 Kw 4P 380V
Working radius (m)The Working Range Chart does not take into account boom deflection under load.
Working Range Diagram
Dimensions
Diagram shows outriggers at
maximum position
Maximum Reach Below Ground Level Four Fall Two Fall Single Fall
20.50m 41.00m 82.00m
Total rated load Outriggers at Maximum position4.735m/7.695m boom 10.655m boom 13.565m boom 16.475m boom
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
<2.73.54567
7.25
3830303025802030168013801330
3.5456789
10.2
303025802030168013801130880580
44.556789101112
13.1
223019301730140011801030930830690530430
55.56789
10111213141516
1130980910760650600550490440380320260210
Total rated load Outriggers at Middle position4.735m/7.695m boom 10.655m boom 13.565m boom 16.475m boom
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
<2.73.54567
7.25
3830303025801880143011601120
3.5456789
10.2
30302580188014301130880740490
44.556789101112
13.1
22301830163013301080880730530480430330
55.56789
10111213141516
1130980910730630550480430380330280220180
Total rated load Outriggers at Minimum position4.735m/7.695m boom 10.655m boom 13.565m boom 16.475m boom
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
Workingradius (m)
Total ratedload (kg)
<2.73.54567
7.25
38303030258016801180930780
3.5456789
10.2
3030258016801180880730580400
44.556789101112
13.1
2230183016301180830680550430380350310
55.56789
10111213141516
1130980880730530450420370330280240190150
Fly JibBoomangle(deg)
72+6966636055
520420320250220170
kg
1720mm
4980mm
1980
mm
1380mm320mm
2600mm
19
20
21
22
20.7
Lifti
ng h
eigh
t (m
).
5520
mm
Max
(4
888m
m M
id, 4
248m
m M
in)
5118
mm
Max
(456
6mm
Mid
, 400
8mm
Min
)
5786mm Max(5372mm Mid, 4953mm Min)
MINI CRANES
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
GlazingGeneral Lifting
A Mini Crane HireCompany Limited LC785B Crawler Crane
Specification
4.9 Ton Max Capacity
16.35m Max Working Height 20.3m withOptional Fly Jib
Blade
2000kg Pick & Carry Duty
Minimal Tail Swing
New, Wider Air Conditioned Cab
Roof Window Wiper
Tilt Alarm
Variable (Hi/Lo) Travel Speeds
New Improved Moment Limiter
Hydrostatic Transmission
4 Fall / 2 Fall Hook Block
7 inch TFT Multi Monitor
Powerful Two Speed Winch with HydraulicDisc Brake
Data Logger
12
The new Maeda LC785-8B crawler crane has many improved features as per specification.
Restricted AccessRailway Maintenance Industrial Maintenance
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited LC785B Crawler Crane
13
This working range chart shows total rated load including boom and jib deflection.
2795
mm
2840mm
5020mm
2360mm
2235mm
450mm
• The Total Rated Load Charts are based on the actual working radius including boom deflection. The weightof the hook (standard 4 fall - 90kg) must be included as part of the load shown in the Total Rated Load Charts.
When using two fall or single fall hooks, use the appropriate four fall Total Rated Load Chart but with a maximumload of: Two Fall - 2450kg, Single Fall - 1220kg.
•
Pick & Carry Duties4.63m boom 7.38m boom 10.13m boom
Working radius
(m)
Total rated
load(kg)
Working radius
(m)
Total rated
load(kg)
Working radius
(m)
Total rated
load(kg)
2 2000 2 2000 2 14002.5 2000 2.5 2000 2.5 14003 1670 3 1700 3 1360
3.5 1330 3.5 1380 3.5 11704 1140 4 1020
4.5 960 4.5 8905 810 5 770
5.5 690 5.5 6806 590 6 590
6.27 540 6.27 5506.5 5107 440
7.5 3808 320
8.5 2709 230
9.02 230
Total rated load4.63m boom 7.38m boom 10.13m boom 12.88m boom 15.63m boom
Working radius
(m)
Total rated
load (kg)
Working radius
(m)
Total rated
load (kg)
Working radius
(m)
Total rated
load (kg)
Working radius
(m)
Total rated
load (kg)
Working radius
(m)
Total rated
load (kg)
2 4900 2 4900 2 2600 2 2000 2 N/A2.5 3800 2.5 3760 2.5 2600 2.5 2000 2.5 14003 2900 3 2980 3 2310 3 2000 3 1400
3.5 2290 3.5 2420 3.5 2010 3.5 1890 3.5 14004 2000 4 1750 4 1650 4 1400
4.5 1670 4.5 1530 4.5 1450 4.5 13205 1400 5 1340 5 1280 5 12006 1000 6 1030 6 1010 6 990
7 780 7 800 7 8208 580 8 630 8 6809 410 9 500 9 560
10 390 10 45011 300 11 360
12 28013 21014 200
14.52 200
Dimensions
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited LC785B Crawler Crane
13
This working range chart shows total rated load including boom and jib deflection.
2795
mm
2840mm
5020mm
2360mm
2235mm
450mm
• The Total Rated Load Charts are based on the actual working radius including boom deflection. The weightof the hook (standard 4 fall - 90kg) must be included as part of the load shown in the Total Rated Load Charts.
When using two fall or single fall hooks, use the appropriate four fall Total Rated Load Chart but with a maximumload of: Two Fall - 2450kg, Single Fall - 1220kg.
•
Pick & Carry Duties4.63m boom 7.38m boom 10.13m boom
Working radius
(m)
Total rated
load(kg)
Working radius
(m)
Total rated
load(kg)
Working radius
(m)
Total rated
load(kg)
2 2000 2 2000 2 14002.5 2000 2.5 2000 2.5 14003 1670 3 1700 3 1360
3.5 1330 3.5 1380 3.5 11704 1140 4 1020
4.5 960 4.5 8905 810 5 770
5.5 690 5.5 6806 590 6 590
6.27 540 6.27 5506.5 5107 440
7.5 3808 320
8.5 2709 230
9.02 230
Total rated load4.63m boom 7.38m boom 10.13m boom 12.88m boom 15.63m boom
Working radius
(m)
Total rated
load (kg)
Working radius
(m)
Total rated
load (kg)
Working radius
(m)
Total rated
load (kg)
Working radius
(m)
Total rated
load (kg)
Working radius
(m)
Total rated
load (kg)
2 4900 2 4900 2 2600 2 2000 2 N/A2.5 3800 2.5 3760 2.5 2600 2.5 2000 2.5 14003 2900 3 2980 3 2310 3 2000 3 1400
3.5 2290 3.5 2420 3.5 2010 3.5 1890 3.5 14004 2000 4 1750 4 1650 4 1400
4.5 1670 4.5 1530 4.5 1450 4.5 13205 1400 5 1340 5 1280 5 12006 1000 6 1030 6 1010 6 990
7 780 7 800 7 8208 580 8 630 8 6809 410 9 500 9 560
10 390 10 45011 300 11 360
12 28013 21014 200
14.52 200
Dimensions
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited
14
K26/34 Truck mounted crane
Specification
K 26-34 TS - The Compact One with the TS Profile
• Hook height: 34m.
• Max. charge hook: 1500 kg
• Width of support: 2,3 - 4,6m
• Opportunity to use as a full hydraulic working platform
• Fast and safe assembly by full hydraulic support levers
Standard Features
• Janmar Diesel motor
• Control system to intercept turning over
• Hydraulic support levers
• Hydraulic grabber (160)
• Fix counterweight
• 3600 Hydraulic endless rotatability
• The Hetronic proportional radiocontrol unit is infinitely proportionedfor accuracy, for multi-purpose use
MINI CRANES
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
Hook height: 34m.
Charge hook 1,5 t.
Multi-purpose use
A Mini Crane HireCompany Limited
MC815C Spider CraneA Mini Crane HireCompany Limited LC785B Crawler Crane
13
This working range chart shows total rated load including boom and jib deflection.
2795
mm
2840mm
5020mm
2360mm
2235mm
450mm
• The Total Rated Load Charts are based on the actual working radius including boom deflection. The weightof the hook (standard 4 fall - 90kg) must be included as part of the load shown in the Total Rated Load Charts.
When using two fall or single fall hooks, use the appropriate four fall Total Rated Load Chart but with a maximumload of: Two Fall - 2450kg, Single Fall - 1220kg.
•
Pick & Carry Duties4.63m boom 7.38m boom 10.13m boom
Working radius
(m)
Total rated
load(kg)
Working radius
(m)
Total rated
load(kg)
Working radius
(m)
Total rated
load(kg)
2 2000 2 2000 2 14002.5 2000 2.5 2000 2.5 14003 1670 3 1700 3 1360
3.5 1330 3.5 1380 3.5 11704 1140 4 1020
4.5 960 4.5 8905 810 5 770
5.5 690 5.5 6806 590 6 590
6.27 540 6.27 5506.5 5107 440
7.5 3808 320
8.5 2709 230
9.02 230
Total rated load4.63m boom 7.38m boom 10.13m boom 12.88m boom 15.63m boom
Working radius
(m)
Total rated
load (kg)
Working radius
(m)
Total rated
load (kg)
Working radius
(m)
Total rated
load (kg)
Working radius
(m)
Total rated
load (kg)
Working radius
(m)
Total rated
load (kg)
2 4900 2 4900 2 2600 2 2000 2 N/A2.5 3800 2.5 3760 2.5 2600 2.5 2000 2.5 14003 2900 3 2980 3 2310 3 2000 3 1400
3.5 2290 3.5 2420 3.5 2010 3.5 1890 3.5 14004 2000 4 1750 4 1650 4 1400
4.5 1670 4.5 1530 4.5 1450 4.5 13205 1400 5 1340 5 1280 5 12006 1000 6 1030 6 1010 6 990
7 780 7 800 7 8208 580 8 630 8 6809 410 9 500 9 560
10 390 10 45011 300 11 360
12 28013 21014 200
14.52 200
Dimensions
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
Specification
• Crane Capacity: 8.09t x 2.4m • Max lifting height: 19.6m • Pick & carry capacity: 1.0t • 1.5t Hydraulic type Optional
Fly Jib. Max lifting height: 25.5m
Features
• Power lifting mode • Joystick type radio remote
control • Self levelling function • Auto-crane stow function • Slew restriction device • EU Stage III B Compliant
Engine (DPF type)
New 10.4 inch Touchscreen Multi Monitor.
MC815C - Technology in motion
A Mini Crane HireCompany Limited
15
K29/36 Truck mounted crane
Specification
K 29-36 TS - Strong in height and width
• Hook height: 36m.
• Max. charge hook: 2000 kg
• Width of support: 2,5 - 5,2m
• Special rail system for efficient work
• Possibility to retool it into a
Standard Features
• Janmar Diesel motor
• Control system to intercept turning over
• Hydraulic support levers
• Hydraulic grabber (1600)
• Fix counterweight
• 3600 Hydraulic endless rotatability
• The Hetronic proportional radiocontrol unit is infinitely proportionedfor accuracy, for multi-purpose use
MINI CRANES
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
Hook height: 36m.
Charge hook 1,5 t.
Multi-purpose use
working within several minutes
A Mini Crane HireCompany Limited
14
K26/34 Truck mounted crane
Specification
K 26-34 TS - The Compact One with the TS Profile
• Hook height: 34m.
• Max. charge hook: 1500 kg
• Width of support: 2,3 - 4,6m
• Opportunity to use as a full hydraulic working platform
• Fast and safe assembly by full hydraulic support levers
Standard Features
• Janmar Diesel motor
• Control system to intercept turning over
• Hydraulic support levers
• Hydraulic grabber (160)
• Fix counterweight
• 3600 Hydraulic endless rotatability
• The Hetronic proportional radiocontrol unit is infinitely proportionedfor accuracy, for multi-purpose use
MINI CRANES
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
Hook height: 34m.
Charge hook 1,5 t.
Multi-purpose use
A Mini Crane HireCompany Limited
A Mini Crane HireCompany Limited KATO CR-100
Specification
Features of the CR-100
Maximum rated lifting capacity: 10t 3600
rotating body
Maximum boom length: 23.5m (Main boom)
Compact and highly manoeuvrable.
Simple to use independent rear steering.
Compact tail swing for working in confinedareas.
Six-section, fully powered 23.5m main boom.
Standard twin winches and rooster sheave(1.4 tonnes line pull on rooster sheave).
Optional detachable lightweight 2.5m fly jib.Easy to handle, deck stowed with 15, 30 and 45 offsets.
Remote hook stowage system
KATO safe indicator with “virtual wall capability”
16
City Range Crane
1.
2.
3.
4.
5.
6.
7.
8.
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited
15
K29/36 Truck mounted crane
Specification
K 29-36 TS - Strong in height and width
• Hook height: 36m.
• Max. charge hook: 2000 kg
• Width of support: 2,5 - 5,2m
• Special rail system for efficient work
• Possibility to retool it into a
Standard Features
• Janmar Diesel motor
• Control system to intercept turning over
• Hydraulic support levers
• Hydraulic grabber (1600)
• Fix counterweight
• 3600 Hydraulic endless rotatability
• The Hetronic proportional radiocontrol unit is infinitely proportionedfor accuracy, for multi-purpose use
MINI CRANES
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
Hook height: 36m.
Charge hook 1,5 t.
Multi-purpose use
working within several minutes
A Mini Crane HireCompany Limited
Bocker Truck Crane AK 44/4000
17
Bocker Truck Crane
Aluminium lightweight crane with 44 metre reach
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
Dimensions / Specification
LMax. range of platform operation with 15,5 t truck
Telescope arm angle approx.Jib angle approx.Swivel area approx.Working height up to jib approx.Max. extension length including approx.mech extension (2,0 m)Max. extension length approx.Extendible JibBasic length approx.max. extendible length approx.Current of hydraulic pump approx.Hook speed approx.Support length approx.Support width approx.One-sided support approx.Length vehicle approx.Width vehicle approx.Height vehicle DB/MAN approx.Body weight approx.
500 kg Lifting capacity approx.1000 kg Lifting capacity approx.2000 kg Lifting capacity approx.4000 kg Lifting capacity approx.
100 kg Lifting capacity approx.250 kg Lifting capacit approx.Max. working height approx
Min. wheelbaseGross vehicle weightMax. dead weight
87 degrees165 degrees620 degrees33.00 m44.00 m
42.00 m
4.55 m8.90 m100 litres60 m/min6.05 m5.74 m4.15 m10.55 m2.55 m3.94/3.99 m9,600 kg
30.00 m22.00 m14.00 m8.20 m
33.00 33.00 m30.00 30.00 m41.50 38.00 m
5360 mm15.5 t5.3 t
PK 250-1 PK 250-D
LMax. range of platform operation
Truck Data
A Mini Crane HireCompany Limited
Hiab Lorry Loader 16000 Crane
18
Versatile Crane
Three option: of Trailer Low Loader Heavy Duty, Short low Loader, Short Rigged Crane 3100kg capacity 16m radius
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
Specification
F66ORA.2.26 he-dynamic - Load Diagram
Fassi crane TYPE F660RA he-dynamic
Radio remote Fassi RCS radio with maxi control handle - 8 linear lever functions.
Outriggers hydraulically tiltable outriggers by chain Positioning of o/r at 1800)
Suppi outriggers Type 751802HEJCE - width mm 6900 - weight Kg 500 complete with Fassi stability control FSC
Miscellaneous IE742 single feeding box (mounted)
Stability control FSC-S Fassi Stability Control system. Authorised installer to adjust systems in line with vehicle stability. Outriggers lock for crane outriggers system.
66Company LimitedA Mini Crane Hire HiHab lorry loader 16000 Crane
LOAD DIAGRAM WITH LIFTING MOVEMENT LIMITING DEVICE
A Mini Crane HireCompany Limited Valla 20E
Pick & Carry Crane Standard Specifications - can be used in conjunction with a minifor winch
Max Lifting Capacity:
Width:
Weight
Lift Height
Power Source
Motor
Transmission
19
2,000 kg
950mm
1,950 kg (basic spec)
4.0m
Electric
2kW - 24v AC fanned reversible electric motorfitted with variable speed control, disk brake ondrive wheel electrically operated
Reduction between motor and wheel by gears inoil bath
Frame:
Boom:
Hydraulic System:
Safe Load Device:
Tyres:
Pre-formed and welded steel plate with integral counterweight
2 hydraulic telescopic sections
Self enclosed circuit, powerd by geared pump, fitted with
self cancelling valves, maximum hydraulic pressure 180 Bar
Fitted electronic load indicator, visual audible indicators to
meet CE Regulations.
Front - 2 solid tyres 15 x 6-8”
Rear - 1 cushion 300 x 138mm
The crane complies with following international standards:LS.P.E.S.L.DN 15018 (1,3) - 15019 (1) Class H2 B3ANSI - 199498/37/CE89/336/CEE
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited
20
SLK Glass Max with a butlerFloor Cranes
SLK 15 & 25 Glass MaxCounter Balance Floor Cranewith Crane and fork attachments
Features at a glance
Technical Data SLK 15
Lifting Standard Fork ups
Height Stowed
Length Stowed
Length Working Position
Width Stowed
Width Working Position
Ground Clearance Working Position
Loading Height Minimum
Pay Load
Weight Basic Chassis
Weight Complete
5.00m
2.04m
0.90m
1.80m
0.80m
2.20m
0.08m
0.27m
300kg
144kg
272kg
SLK 25
7.90m
2.04m
1.02m
2.20m
0.80m
2.20m
0.08m
0.27m
300kg
204kg
332kg8 x counter balance weights @ 16kg
SLK Glass Max Specifications
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
Floor CranesCounterbalance floor cranes with hydraulic lifting arm.
Models available: GK200 – GK900 Floor Crane – Counterbalance Floor Cranes with Hydraulic lifting arm (large wheels available like “big foot” model)
• Max Lifting Capacity 200kg – 900kg
• Max (below the Hook) Height: 1.5m – 3.05m
• Ideal for Commercial Glazing, can be used in conjunction with a Vacuum Lifter for glazing shopfronts and install unitised panels from the floor above in conjunction with a minifor
• Easily assembled/disassembled for transportation purposes (passenger elevator friendly…)
• Lockable castor wheels
A Mini Crane HireCompany Limited
GK900 Counterbalance Floor Crane
21
The GK900 is the next generation counterbalance floor crane with a 4m reach powered boom up and down and extend and retract breaks down into manageable components. 110v power.
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited
22
580 & 608 Glazing Robot
580 range of application:Suitable for lifting and moving of Glass panels up to 580kgCan be used in conjunction with a minifor winchLift height 2.4m
Features at a glance
Handy and compact
Multifunctional
Dual circuit vacuum system
Self-driven battery powered
SWL 580KG
Safe and easy to operate
Labour saving
Improves work environment
Can be transported in a van
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
608 range of application:Suitable for lifting and moving of Glass panels up to 608kgHook attachmentCan be used in conjunction with a minifor winchLift height 2.4m
Features at a glance
Off road with front-wheel drive
Manoeverable with dual rear wheels
Foam filled tyres
Self-driven
Electronic brake
Lifting height 2950mm (centre of yoke)
2 vacuum circuits with 2 pumps
4 suction pads O 400mm
Ergonomic operation handle
Waterproof according to ip65
A Mini Crane HireCompany Limited
23
780 Glazing GiantGeko - MRT4 Glazing Robot
Telephone: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
780 range of application:Suitable for lifting and moving of Glass panels up to 780kgHook attachmentCan be used in conjunction with a minifor winch
Features at a glance
2 vacuum circuits with 2 pumps
For rough terrain with frontwheel drive and big wheels.Electronic brake
Manoeuvrable with dual rear wheels
Lifting height 4000mm (centre of yoke)
Remote control for all hydraulic functions
Waterproof according to ip65
The Geko-MRT4 Glazing Robotrange of application:With a detachable vacuum systemSuitable for glass installation
Features at a glance
Capacity 250kg
Working height 2.65m
Total width 618mm fits through standard doorway
Hydraulic lifting and tilting powered by12v battery pack
200 powered forwards tilt head movement
300 powered backwards tilt head movement
500mm powered vertical head movement
100mm lateral head movement
Detachable below-the-hook 320kg vacuum lifter
Removable counterweights for ease of transport
1850
2655
with
ext
ensi
on a
rms
2395
with
out e
xten
sion
arm
s
A Mini Crane HireCompany Limited
Channel Lifters P1-11MT2HV11DC Manual Tilter 300
In addition to a modular design, these Power-Grip vacuum lifters provide 1800 rotation and 900 tilt, for expandability and a full range of load motion at the installation site or on the shop floor.
P11104DC (for flat materials)
P11004DC (for curved materials)
P1HV1104DC (for rough materials)
Features at a glance
Average Unit Weight: 32kgStandard Operating Power: 12 volts DC, 10 amps (for each Pad Channel)Load Movement: Manual rotation, 1800 edgewise, with locking in three positions.Manual tilt, 900 between upright and flat, with automatic latching in upright position.(Units can be tilted ONLY when the lift bar is locked in the centre position, asshown on drawings.)On-board battery and chargerBattery energy gaugeLow vacuum warning lightVacuum gaugeVacuum line filterVacuum reserve tank320kg SWL
24 T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
Features at a glance
Standard pad spread 279mm x 584mm
SWL 135kg
Low vacuum warning light
Low vacuum warning buzzer
On board battery charger
Vacuum warning gauges
Reserve vacuum tank
Load movement manual tilt 90 degrees
MT2HV11DC Manual Tilter 300
This power-grip vacuum lifter provides an economical way for a single person to lift and tilt loads.
A Mini Crane HireCompany Limited MRT4/6-DC Lifters
MRT4-DC LifterDesigned for use with a crane or other hoisting equipment.The MRT4-DC lifter employs vacuum to hold the load.They provide manual 360 degree rotation and manual 90 degree tilt movements for load manipulation.
Features at a glance
Average Unit Weight: 56kg
Standard Operating Power: 12 volts DC, 10 amps
Load Movement: Manual rotation, 3600 edgewise, withlocking in four positions.
Manual tilt, 900 between upright and flat, with automaticlatching in upright position.
On-board battery and charger
Battery energy gauge
Low vacuum warning light
Vacuum gauge
Vacuum line filter
Vacuum reserve tank
SWL 320kg
25T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
MRT6-DC LifterDesigned for use with a crane or other hoisting equipment.
The MRT6-DC lifter employs vacuum to hold the load.
They provide manual 360 degree rotation and manual 90 degree tilt movements for load manipulation.
Features at a glance
Average Unit Weight: 86kg
Standard Operating Power: 12 volts DC, 10 amps
Load Movement: Manual rotation, 3600 edgewise, with lockingin eight positions.
Manual tilt, 900 between upright and flat, with automatic latchingin upright position.
On-board battery and charger
Battery energy gauge
Low vacuum warning light
Vacuum gauge
Vacuum line filter
Vacuum reserve tank
SWL 500kg
A Mini Crane HireCompany Limited
26
Range of application:Lifting of glass elements up to 600kgCan be inserted between the building and scaffold with lifting ring
Features at a glance
Two independent vacuum circuitsDual safety systemIntegrated reserve vacuumIntegrated gauge monitoring vacuumOptical and acoustic alarmsSWL 600kgSWL 300kg with ring configurationFulfils DINEN13155 requirement
Oktopus GLR600DSZ2 Vacuum Lift
Specification
Dual vacuum circuit 2 pumps 2 tanksSWL 750kg and 900kg110v chargingWeight 75kgTilt damping systemAudible and visual alarm systemTravel trolley
DSZ2 is the most slimline vacuum lift. Available with animpressive 900kg and 750kg SWL tilt damping androtation. Dual circuit vacuum system.
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited
Oktopus GL-CC777300
Range of applicationSuitable for lifting and moving of large format glass panels in combination with a mini crane.
Crane attachment for use on MC285, MC305, MC405
Features at a glance
Mounting directly at the crane arm
2 independent vacuum circuits, each vacuumcircuit with dual safety system
Integrated reserve vacuum
Integrated gauge, monitoring the vacuumand power supply
Optical and accoustic alarm signals
Batteries attached on the lower end ofthe crane arm
Electric actuators for a precise, seamlessmovement
Rotating (950), swivelling (+400) andtilting (1200)
All pneumatic functions by remote control
Extension arms
Fulfils DIN EN 13155 requirements
Safe working load: 300kg/600kg(400mm suction cups)
Weight of device: vacuum unit: approx. 123kg
27T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
OKTOPUS GL-R600Suitable for the installation of large format glass and facade panels within difficult-to-access areas.
(facade apertures, roof overhangs, slanted glazings).
Features at a glance
Cable remote control operated
Motor-driven counterweights
Counter balance loads up to 600kgpowered by a high capacity rechargeablebattery
Integrated gauge for monitoring the powersupply
Weight:
8pcs. of counterweight:
1 counterweight =
Controls:
Power supply:
without counterweight: approx. 82kg
approx. 282kg
25kg
cable remote control
24 V battery
R
approx. 2280approx. 710mm
App
rox
1090
mm
Oktopus GGA-EK600 B24R
A Mini Crane HireCompany Limited Pankoki Curved Vacuum Lift
Specification
DescriptionIncreased safety via 4 independent vacuum circuitsEach vacuum circuit has a vacuum tank with non returnvalve, vacuum switch and control vacuum meter
4 completely closed vacuum circuits prevent loss ofvacuum at power failure
Acoustic signal indicates insufficient vacuum
Carrying bars are turnable on bearings for minimumradius of 600mmAll suction cups lockable individually
Turning device with roller bearings and lockingevery 900
Tilting device (00 to 900 ) with locking device every 30
Vacuum GenerationFor battery operation with quick-change device forshort battery change times of less than one minute
Battery charger for charging second battery
No cable - no hose
OperationON/OFF
SUCTION/RELEASE
Turning
Tilting
28
directly at the device
via hand valve at the device
tackle
tackle
Kombi 7411-DSG7 with 32 suctioncups 540 in 5 rows with extensionset 7003-VLDSG7
2220
1060
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited Hydraulica 1200
Range of application:Hydraulica full motorised rotation and tilt dual circuit vacuum system.
Wired remote control up to 200kg SWL
Specifications
Dual circuit vacuum system
18 pad multi configuration
Motorised tilt and rotate
SWL 1200kg and 2000kg
Wired remote control
Transport trolley
29T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited Accessories
Clamping carriage, self-clamping
A-Frame Glass Stillages
GGT 700 Glass Transportation Trolley
Particulate Filters
Clamping Carriage, self-Clamping
New - Now with air tyres for uneven surfaces
Length - 30 cm
Width - 30 cm
Height - 30 cm
Weight - 7.72 kg
With air tyres for quiet transport. For materials up to 100 mm width and 200 kg weight. Inner felt linings. Includes 2 spacing inserts 250 x 70 x 30 mm for thin material. Includes 4m belt to keep loads securely in place, as well as a guiding rod for small loads.
Various sizes available - can be easliy lifted by a forklift truck or crane for safer, quicker transportation of glass on large sites.The heavy duty compounds wheels are suitable for use on rough ground.We can also custom build A-Frames and Stillages to match your load requirements.
Three sizes to fit various applications.Supplied as a fully assembled kit to ensure easy fitmentEasy to replace elementsRe-usable mounting kit to minimise costs
30 T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
Features at a glance
Adjustable height
Adjustable length
Capable of transporting6m lengths
Capable of transporting4m height
Independent steering
Fitted with vacuum cups
SWL700KG
●
●
●
●
●
●
●
Sutbusta features at a glance
60cm wide x 75cm long x 60cm high Weight 40kg
40 engine hour cycles between regeneration 4.5 hours charge time
220v - 240v, 9A, 2kW power supply Removes 95% of diesel particulate
Can be connected to any diesel equipment up to 3ltr (90kW power)
●
●
●
●
●
●
●
A Mini Crane HireCompany Limited Minifor Winches
Specification
31T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
The extending version allows the movement of long and awkwardloads from inaccessible locations, but with up to 9 different liftingpositions and with the added benefit of two hooks and shacklesso as to ‘cradle’ your load.
The Adjustable Fork Mounted Hook provides a quick and economical method of the lifting and positioning of unpalletised loads.Multiple lifting positionscan be achieved by the correct positioning of the attachment along the fork blade.
Fork Mounted Extending Jib: Various sizes Fork Lift Attachment
MINIFOR hoists are used to lift or pull objects over great distances depending on the wire rope length. They are suitable for use in numerous configurations. They are operated through a pushbutton control. Optionally, the MINIFOR hoist can be equipped with a wire rope reeling device or a wireless remote control.
• Capacity 300kg, 500kg or 950kg
• Low weight
• Quick installation
• Long wire rope length
• Easy to use, light-weight, robust, powerful
• Available as single phase and three phase model
• Alternatively with cable reeling device (max. 40 m), wireless remote control, set of sheave blocks
Various rope lengths available
Portable hoist to lift and pull loads, for utilisation in numerous configurations.
Portable Hoist Manual Chain Hoist
Electric chain hoist Lodestar
Capacity: 1000kg – 5000kg
Number of falls 1
Hoist weight 5kg – 12kg
Power source Manual
Various Chain Lengths available
Hand operated manual chain hoists (also commonly known as a chain block or block and tackle) are a piece of portable lifting equipment in versatile configurations; they are very
adaptable to the many alternative working scenarios and working environments including permanent and temporary installations.
The CM Lodestar Electric Chain Hoist is known as one of the most robust hoists on the market with tough aluminium alloy covers that totally enclose the mechanical and electrical components with efficient heat dissipation. Well known throughout the world the Lodestar is manufactured in the USA and a well as normal 400v we can offer 110v and 230v options for single phase operation- ideal for hire companies and building sites where three phase power is not available.
With capacities up to 3,000kg to suit most applications, the ergonomic hoist features handy carrying handles for easy transportation and 1m supply cable with Cee-Form plug. The Lodestar industrial hoist boasts an operating duty at 50% (30 minutes continuous use per
hour) and FEM classification of 2M, ideal for intense operation.
The low voltage pendant control is protected to IP65 and every hoist features adjustable upper and lower limit switches, so you can easily set the required hook path. A lifetime lubricated gearbox contributes heavily to exceptional service and maintenance characteristics.
Designed with low headroom in mind the Lodestar features small closed height dimensions and perfect for long heights of lift for applications such as wind turbines. Industrial strength lifting is the Lodestar speciality and this hoist just keeps on lifting.
Various rope lengths available
A Mini Crane HireCompany Limited
32
Accessories
Range of applicationSuitable for lifting and lowering personnel in combination with a mini crane.Crane attachment for use on Maeda MC305, MC405
Features at a glance
Mounting directly on to the crane hook
Roof cover with pitch
Wheels to roll against the face of the building
Aluminium construction
Drainage holes in the floor
Both one and two personnel basketsavailable
Integrated tool tray
Emergency lowering system with the craneand basket combination
VERIBOR blue line suction lifter,3 suction cups
For heavy loads. Tested by TUV and safety certified with the GS sign. Suitable for all materials with smooth, flat, air-tight surfaces such as glass, plastic, metal, coated wood, marble, etc. Spare suction discs are supplied complete with suction pad, lever, bolt, spring and pressure plate.
VERIBOR blue line suction lifter,2 - cup, transverse handle
Suction Pad - 120mm
Number of suction pads - 3
Load Capacity - 100kg
Lifting Direction - Parallel
Weight - 1.215kg
- Various sizes/specifications available
Various Glass Carrier/Aquaglass (wet)
Glazing Shovel’sSpatulars
Pry Bar
Telephone: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited
33
Training, Service & Testing
A Mini Crane Hire TrainingA Mini Crane Hire offer an accredited CPCS training centre for Mini cranes, lifting personnel, vacuum lifters, floor cranes and smartlift's. These training courses vary in duration and can last 1-4 days dependant on the type of training
Training
A66 Mini Crane Operator
Appointed Person
Lift Supervisor
Slinger Signaller
Vacuum Lift
Floor Crane
Smartlift
A Mini Crane HireService and Testing CentreManufacturer trained personelBespoke Engineering
Testing/Service
Mini Crane
SLK
Vacuum lift
Smartlift
Lifting Gear
Bespoke Engineering
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited
34
Mini Cranes - Huge Possibilities
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
Mini Cranes - Huge Possibilities
35
A Mini Crane HireCompany Limited
T: 0844 770 6774 E: info@aminicranehire.co.uk www.aminicranehire.co.uk● ●
A Mini Crane HireCompany Limited
www.aminicranehire.co.uk
MINICRANESGLAZINGROBOTSCRANESVACUUMLIFTERSGLAZINGROBOTSCRANESVACUUMLIFTERSMINICRANESGLAZINGROBOTS
MINICRANESGLAZINGROBOTSCRANESVACUUMLIFTERSGLAZINGROBOTSCRANESVACUUMLIFTERSMINICRANESGLAZINGROBOTS
MINICRANESGLAZINGROBOTSCRANESVACUUMLIFTERSGLAZINGROBOTSCRANESVACUUMLIFTERSMINICRANESGLAZINGROBOTS
A Mini Crane Hire Company LimitedNorth WestUnit 7D, Academy Business Park, Liverpool L33 7SATel: 0844 770 6774 Fax: 0844 770 6775Email: info@aminicranehire.co.uk
HeathrowUnit 5, Heathrow International Trading EstateHeathrow TW4 6HB.Tel: 0203 725 6215
Mini Cranes Huge Potential...Supplied Nationally
Recommended