View
215
Download
0
Category
Preview:
Citation preview
7/29/2019 mp req
1/6
Sl
No.
Proposed Item Quantity
Required
Estimated
UnitRate
(Rs. in
Lacs )
Estimated
Amount
(Rs.in Lacs)
Specifications
1.
8085 MicroProcessor
TrainerKit, Instruction manual
0.08 CPU : 8085 @ 3.702 MHZ
Speed.ROM : 16 KB expandable up to
128 KB.
RAM : 64K. Expandable up to
128K.
Parallel I/O: 48 I/O Lines.
Timer : 3 Programmable Interval
Timers.
Serial I/O.: One 8251 Serial
Port Provided..
Keyboard: 32 Keys Keyboard.
On board Battery back-up, RS-232C cable,
windows based Driver software
Built-in Assembler, Dis-
Assembler, Text editor.
Bus Expansion through 26 Core
FRC cable.
5V, 3Amps SMPS Power supply
and Users
Manuals
2.
8086 Microprocessor
Trainer kitUser Manual
0.09 CPU : 8086 @ 8 MHZ
Speed.EPROM : 128 KB. Expandable
up to 256KB.
RAM. : 64 K. Expandable up
to 128K.
Key board. : 32 Keys keyboard.
Programmable interrupt
controller
I/O Lines. : 48 I/O Lines
On board 50 Pin RFC
Connecters.
Timer Signals. : Timer1 andTimer2 signals are
brought out to Header Pins.
On board Battery back-up
Provided.
RS-232C cable, windows based
Driver software
Built-in Assembler, Dis-
Assembler, Text editor.
Bus Expansion through 26 Core
FRC cable.
Power Supply. 5V, 3Amps SMPSPower supply ,
7/29/2019 mp req
2/6
user manual
3.
8255 Interfacing Kit,
Instruction manual
0.1
4.
8051 Micro Controller
Trainer kit
0.15 CPU : 8051 @
11.0592 MHZ Speed.
EPROM : 128 KB.Expandable up to
256KB.
RAM. : 64 K.
Expandable up to 128K.
Key board. : 36 Keys
keyboard.
Programmable interrupt
controller
I/O Lines. : 48 I/O Lines
On board 50 Pin RFC
Connecters, On boardBattery back-up.
RS-232C cable, windows based
Driver software.
Built-in Assembler, Dis-
Assembler, Text editor.
Bus Expansion through 26 Core
FRC cable.
Printer Interface using 25 Pin D
type Connector.
Buffered bus signals through
ribbon cableconnector for easy system
expansion
Power supply 5V, 3Amps SMPS
Power supply,
user manual
5.
89C51 Microcontroller
trainer kit,
Instruction
manual
0.1 LPC2148 microcontroller with
512 KB Flash
Program memory 32+8KB SRAM
12Mhz crystal, On-chip two 10
bit ADC capable of
providing 14 analog inputchannels, On-chip USB
2.0 Port
On-Board USB to UART bridge
connected to
CPU-UART0 for ISP
UART1 terminated at standard 9
pin D type
connector
8 LEDs connected to Port lines
One 8 way DIP Switch, 4 x 4
Matrix KeypadOne 16X2 Alpha-numeric LCD,
7/29/2019 mp req
3/6
One
Potentiometer to set the analog
input to ADC
One 16Kbits Serial EEPROM
Single digit
7segment display connected toCPU I2C port,
Two digit 7 Segment display
connected to CPU IO
Port
CPU - RTC Crystal 32.768Khz
with battery backup
One Temperature sensor
connected to ADC
channel
On-chip DAC terminated in Port
lines terminatedin 26pin FRC for external
interface boards
Standard JTAG port for
emulator / programming
Built-in Power Supply and user
manuals
6.
Embedded System Base
Module for Basic
Embedded
Experiment and
practice/EmbeddedDevelopment Board
0.5 Onboard 40 pin NXP
p89V51RD2 or eq. and 20
pin Atmel 89C2051 or eq. MCU
Interfaces Buffered I/O,
standard 8 key keypad,4 x 3 matrix keypad, RS232 port,
16 x 2 LCD, 7
segment display, ADC, DAC
CD containing free software
IDEs, assemblers,
simulators and User manuals
7.
Bar Code Scanning
Technology
Trainer(NV4001)
0.39 Power Supply : +5 V DC
provided from computer by
PS/2 Interfacing
Current : 100 mA (while
scanning)Scan-Rate : 100 Scans per
second (Typical)
Scanning distance : 0 to 30 mm
Standards Supports : UPC/EAN,
UPC/EAN with
supplemental, UCC/EAN 128,
Code
39, Code 39 Full ASCII, Code 39
Tri
Optic, Code 128, Code 128
Full ASCII, Codabar, Interleaved2/5
7/29/2019 mp req
4/6
Interface supported : PS/2
Ambient Light Immunity :
Immune to direct exposure of
normal
office and factory lighting
conditions,as well as direct exposure to
sunlight.
Dimension (mm) : W 365 D
265 H 120
Weight : 1.2 Kg (approx)
8.
ATM Trainer (NV4002) 0.198 Input : 6 V DCDisplay : 16 2 Characters LCD
Microcontroller : PIC16F877A ,
PIC16F84A
PC-Interface : RS - 232 (DB-9)
Key Matrix : 4 3Dimension (mm) : W 355 D
260 H 125
Weight : 1.5 Kg (approx.)
9.Digital Handy cam 0.6 Camcorder with 10x Optical
Zoom
(Includes Handy cam Station)
10.ADC/DAC interfacing kit 0.1 bit ADC/DAC interfacing with
the
above microcontrollers
11.
Stepper motor
interfacing kit
0.12 Single stepping and free running
modes of operation withspeed variation and direction
reversal.
Torque: 2.8 Kg-cm
Step angle: 1.8
Power: 12V, 1A/phase
12. Traffic lights Interface.
13. Elevator Interface.
14.Temperature Controller
Interface.
15.
Universal CPLD-FPGA
Kit.
Universal adapter
model
0.45 7 segment display.16DIP s/ws.
LCD
interface. 4MHz crystal clock
oscillator. Serial interfaces-
RS232,RS485.Power supplies
5V,3.3V,2.5V,1.8V,1.5V
16.
PIC microcontrollerkit 0.25 16F877 PIC Microcontroller. OnBoard ICD
Compatible.
On Board Serial Port to
Communicate with PC
Operates on 4 MHZ Crystal
Frequency.
Provision to Connect Keypad,
7/29/2019 mp req
5/6
Elevator, Display,
ADC, DAC, 8-bit 16 Channel
ADC, Logic
controller, Tone generator,
Stepper motor, Opto
Isolated input/output card,Relay output, DC
Motor, RTD Interfaces.
On board 6 digit 7 segment
Display.
On board 10 bit, 16.47 s, 8
channel ADC from
16F877 MCU.
Operating Speed: DC 20MHZ
Clock input. DC:
200ns instruction cycle.
Eight level deep Hardwarestack, Power on Reset,
Power up timer and Oscillator
start-up Timer,
Watching Timer, Programmable
Code Protection,
Power Saving SLEEP MODE, In
circuit serial
Programming via two Pins.
Processor read/write access to
Program, Power
Supply and IDE Software. UserManual
17
Interface Boards of PIC
Controllers:
1.QVGA Graphics PICtail
Plus Daughter Board
with 3.2 Display Kit
2. MRF24J40MA 2.4 GHz
RF PICtail Plus Daughter
Card
3. IrDA PICtail Plus
Daughter Card.4. IrDA PICtail Plus
Daughter Card. Requires
2 x Explorer 16 (100pin)
Dev Boards. 2 x
dsPIC33FJ256GP710
PIMs.. 2 x 9V Power
Adapters.
5.Ethernet PICtail Plus
Daughter Card.
6. USB PICtail Plus
Daughter Card.With PIM -MA240014).
7/29/2019 mp req
6/6
7. CAN/LIN PICtail /
PICtail Plus Daughter
Card.
18.
Universal Programmer 0.3 It should have compatible zipsocket.It must be able to
connectusing USB & PC via parallel port.
Programmer should support
programming of
microcontrollers
from ATMEL, AVR, Microchip
PIC,
Philips & EPROM, EEPROM,
FLASH, & Serial EEPROM,
Programmer software.
Recommended