7/29/2019 mp req

1/6

Sl

No.

Proposed Item Quantity

Required

Estimated

UnitRate

(Rs. in

Lacs )

Estimated

Amount

(Rs.in Lacs)

Specifications

1.

8085 MicroProcessor

TrainerKit, Instruction manual

0.08 CPU : 8085 @ 3.702 MHZ

Speed.ROM : 16 KB expandable up to

128 KB.

RAM : 64K. Expandable up to

128K.

Parallel I/O: 48 I/O Lines.

Timer : 3 Programmable Interval

Timers.

Serial I/O.: One 8251 Serial

Port Provided..

Keyboard: 32 Keys Keyboard.

On board Battery back-up, RS-232C cable,

windows based Driver software

Built-in Assembler, Dis-

Assembler, Text editor.

Bus Expansion through 26 Core

FRC cable.

5V, 3Amps SMPS Power supply

and Users

Manuals

2.

8086 Microprocessor

Trainer kitUser Manual

0.09 CPU : 8086 @ 8 MHZ

Speed.EPROM : 128 KB. Expandable

up to 256KB.

RAM. : 64 K. Expandable up

to 128K.

Key board. : 32 Keys keyboard.

Programmable interrupt

controller

I/O Lines. : 48 I/O Lines

On board 50 Pin RFC

Connecters.

Timer Signals. : Timer1 andTimer2 signals are

brought out to Header Pins.

On board Battery back-up

Provided.

RS-232C cable, windows based

Driver software

Built-in Assembler, Dis-

Assembler, Text editor.

Bus Expansion through 26 Core

FRC cable.

Power Supply. 5V, 3Amps SMPSPower supply ,

7/29/2019 mp req

2/6

user manual

3.

8255 Interfacing Kit,

Instruction manual

0.1

4.

8051 Micro Controller

Trainer kit

0.15 CPU : 8051 @

11.0592 MHZ Speed.

EPROM : 128 KB.Expandable up to

256KB.

RAM. : 64 K.

Expandable up to 128K.

Key board. : 36 Keys

keyboard.

Programmable interrupt

controller

I/O Lines. : 48 I/O Lines

On board 50 Pin RFC

Connecters, On boardBattery back-up.

RS-232C cable, windows based

Driver software.

Built-in Assembler, Dis-

Assembler, Text editor.

Bus Expansion through 26 Core

FRC cable.

Printer Interface using 25 Pin D

type Connector.

Buffered bus signals through

ribbon cableconnector for easy system

expansion

Power supply 5V, 3Amps SMPS

Power supply,

user manual

5.

89C51 Microcontroller

trainer kit,

Instruction

manual

0.1 LPC2148 microcontroller with

512 KB Flash

Program memory 32+8KB SRAM

12Mhz crystal, On-chip two 10

bit ADC capable of

providing 14 analog inputchannels, On-chip USB

2.0 Port

On-Board USB to UART bridge

connected to

CPU-UART0 for ISP

UART1 terminated at standard 9

pin D type

connector

8 LEDs connected to Port lines

One 8 way DIP Switch, 4 x 4

Matrix KeypadOne 16X2 Alpha-numeric LCD,

7/29/2019 mp req

3/6

One

Potentiometer to set the analog

input to ADC

One 16Kbits Serial EEPROM

Single digit

7segment display connected toCPU I2C port,

Two digit 7 Segment display

connected to CPU IO

Port

CPU - RTC Crystal 32.768Khz

with battery backup

One Temperature sensor

connected to ADC

channel

On-chip DAC terminated in Port

lines terminatedin 26pin FRC for external

interface boards

Standard JTAG port for

emulator / programming

Built-in Power Supply and user

manuals

6.

Embedded System Base

Module for Basic

Embedded

Experiment and

practice/EmbeddedDevelopment Board

0.5 Onboard 40 pin NXP

p89V51RD2 or eq. and 20

pin Atmel 89C2051 or eq. MCU

Interfaces Buffered I/O,

standard 8 key keypad,4 x 3 matrix keypad, RS232 port,

16 x 2 LCD, 7

segment display, ADC, DAC

CD containing free software

IDEs, assemblers,

simulators and User manuals

7.

Bar Code Scanning

Technology

Trainer(NV4001)

0.39 Power Supply : +5 V DC

provided from computer by

PS/2 Interfacing

Current : 100 mA (while

scanning)Scan-Rate : 100 Scans per

second (Typical)

Scanning distance : 0 to 30 mm

Standards Supports : UPC/EAN,

UPC/EAN with

supplemental, UCC/EAN 128,

Code

39, Code 39 Full ASCII, Code 39

Tri

Optic, Code 128, Code 128

Full ASCII, Codabar, Interleaved2/5

7/29/2019 mp req

4/6

Interface supported : PS/2

Ambient Light Immunity :

Immune to direct exposure of

normal

office and factory lighting

conditions,as well as direct exposure to

sunlight.

Dimension (mm) : W 365 D

265 H 120

Weight : 1.2 Kg (approx)

8.

ATM Trainer (NV4002) 0.198 Input : 6 V DCDisplay : 16 2 Characters LCD

Microcontroller : PIC16F877A ,

PIC16F84A

PC-Interface : RS - 232 (DB-9)

Key Matrix : 4 3Dimension (mm) : W 355 D

260 H 125

Weight : 1.5 Kg (approx.)

9.Digital Handy cam 0.6 Camcorder with 10x Optical

Zoom

(Includes Handy cam Station)

10.ADC/DAC interfacing kit 0.1 bit ADC/DAC interfacing with

the

above microcontrollers

11.

Stepper motor

interfacing kit

0.12 Single stepping and free running

modes of operation withspeed variation and direction

reversal.

Torque: 2.8 Kg-cm

Step angle: 1.8

Power: 12V, 1A/phase

12. Traffic lights Interface.

13. Elevator Interface.

14.Temperature Controller

Interface.

15.

Universal CPLD-FPGA

Kit.

Universal adapter

model

0.45 7 segment display.16DIP s/ws.

LCD

interface. 4MHz crystal clock

oscillator. Serial interfaces-

RS232,RS485.Power supplies

5V,3.3V,2.5V,1.8V,1.5V

16.

PIC microcontrollerkit 0.25 16F877 PIC Microcontroller. OnBoard ICD

Compatible.

On Board Serial Port to

Communicate with PC

Operates on 4 MHZ Crystal

Frequency.

Provision to Connect Keypad,

7/29/2019 mp req

5/6

Elevator, Display,

ADC, DAC, 8-bit 16 Channel

ADC, Logic

controller, Tone generator,

Stepper motor, Opto

Isolated input/output card,Relay output, DC

Motor, RTD Interfaces.

On board 6 digit 7 segment

Display.

On board 10 bit, 16.47 s, 8

channel ADC from

16F877 MCU.

Operating Speed: DC 20MHZ

Clock input. DC:

200ns instruction cycle.

Eight level deep Hardwarestack, Power on Reset,

Power up timer and Oscillator

start-up Timer,

Watching Timer, Programmable

Code Protection,

Power Saving SLEEP MODE, In

circuit serial

Programming via two Pins.

Processor read/write access to

Program, Power

Supply and IDE Software. UserManual

17

Interface Boards of PIC

Controllers:

1.QVGA Graphics PICtail

Plus Daughter Board

with 3.2 Display Kit

2. MRF24J40MA 2.4 GHz

RF PICtail Plus Daughter

Card

3. IrDA PICtail Plus

Daughter Card.4. IrDA PICtail Plus

Daughter Card. Requires

2 x Explorer 16 (100pin)

Dev Boards. 2 x

dsPIC33FJ256GP710

PIMs.. 2 x 9V Power

Adapters.

5.Ethernet PICtail Plus

Daughter Card.

6. USB PICtail Plus

Daughter Card.With PIM -MA240014).

7/29/2019 mp req

6/6

7. CAN/LIN PICtail /

PICtail Plus Daughter

Card.

18.

Universal Programmer 0.3 It should have compatible zipsocket.It must be able to

connectusing USB & PC via parallel port.

Programmer should support

programming of

microcontrollers

from ATMEL, AVR, Microchip

PIC,

Philips & EPROM, EEPROM,

FLASH, & Serial EEPROM,

Programmer software.